I have my server setup on the Shield 2017 16gb. I also have it setup on my pc. With the pc the channel HDGrandSlam works great, but I can't get it to show up in the Shield channels. I do have it rooted so I can transfer the .bundle to the plugins folder with the other plugins I have installed. It is in the right folder but does not show up in channels. Anyone have any idea what to check. Thanks in advance.
Related
the remote desktop client on my vario ii connects to my work desktop perfectly using our office vpn but it is rubbish! the screen doesn't scale well at all or provide any kind of zoom out function.
I have a vnc client which performs much better but it won't connect over the vpn it only works when connected directly to the office network.
forwarding ports is out of the question. so my question is this.
is there a vnc client for pocket pc which will work over vpn or is there a way to make the remote desktop client less rubbish
also are there any apps out there that will let me browse my work network over the vpn. resco doesn't seem to be able to do it even the ftp client won't work.
am I missing something about vpn connections as it seems the only two apps that work over one are activesync and the remote desktop client.
Did you tried to acces domain controler throught the VPN? If yes it is normal that it doesn't work; Domain controler require security enhancement in auth that pocket devices cannot deliver yet. The only way I know is to reduce the security enhancement by using the GPO on the concerned servers; but this is far of being a clean fix.
Just trying to use connect to a vnc server on my workstation. btw our domain controller is the exchange server and active sync works fine
Active sync & exchange do not use the integrate authentification & kerberos; it uses a plain text auth (crypted with the SSL certs), that's why it works. Even if you are on the LAN you will not be able to access your domain's controller shares because of security enhancement.
This is far from solving your issue; but I just wanted to make it clear. Concerning your issue I can't help you at the moment, I still didnt tried the VPN & advanced networking.
btw, good luck
I have set up a vpn on my home computer, no domain, and can't access shares or a vnc server on that either.
Hi Stemill, I seen your other post about the vpn issues with Resco also, I have heard in the past about vpn issues using the [email protected], are you using [email protected] or [email protected]?
I use the terminal/remote client on a daily basis, and it does blow, vj on the board here has made an app that allows fullscreen with the terminal client, and theres a Mocha remote desktop client that supports scaling but no fullscreen, both of which have their own quirks. The scaling makes the text impossible to read when its even at 25%
I have been working on connecting to the remote desktop on mac with vnc, and I've gotten as far as an error on authentification, so I know its possible outside of a home network, but I don't have a clue about buisness situations..exchange or vpn's.
I not even 100% positive about the wap issue, I just seem to remember reading something about it in the past.
Sorry I wasn't of much help, also I kind of have a question for you, I see you mention activesync, you're not activesyncing over an internet connection are you?, I'm working on installing apps that I don't have a .cab for over an internet connection, but the best route I had figured out was to install to a ftp share and then grab the .cab from there with Resco.
Best of luck to you.
Hi there.
I'm on t-mob in the uk. They have a 3g network with full internet access so i'm not using wap at all.
Thanks for the tips about the remote client tweaks. Do you have a link?
I'm using activesync to connect to my works exchange server to sync email and calendar. Pretty sure its not possible to sync over the air to a pc without using exchange. You certainly won't be able to grab remote files via activesync.
If we could figure out how to get apps to work over vpn you could set one up on your pc and (theoretically at least) browse its contents using resco without having to bother with ftp.
If it's not possible to get stuff working over the vpn then you've probably found the best solution already. use ftp or setup a webserver on your pc and host the cab files on that. pocket ie seems to let you install cab files directly from a link.
btw which vnc client are you using on your phone?
Hi, I forget a lot of the time that people here have so many different carriers, sorry.
Here's the link to vj's terminal addon app
http://www.vijay555.com/?Releases:VJFullscreenTSC
And here's the link to the Mocha remote client app
http://www.mochasoft.dk/rd.htm
I used .Net vnc when I was able to get the authentification error
http://www.freewareppc.com/docs/netvncviewer.shtml
I think my problem on the authentification was with the apple remote desktop itself, I read about somethin in the authentification being non standard and sometimes the free vnc viewers don't work..but that was also pc to pc related, the same makers of the Mocha remote desktop also make a vnc client..that was gonna be my next try, I just haven't gotten there yet.
I inistally set up my pc to be able to remote to it from my phone and access aol chatrooms..well mainly one I have hung out in for years, then realized if I set up a server, I could install apps that I couldn't find in .cab form over the net with it, I used to have windows server 2003 set up with IIS(webserver) and the streaming media services, I'm wondering now if the windows streaming media really works with the pocket windows media, and if I could even use it with my gprs/edge connection, I'm still waiting on 3G, suprisingly the remote desktop isn't too bad on gprs/edge.
I'm currently waiting to get a new hard drive before I can really get to work, I'm testing on an old messed up xp install, and half the time I can't even access "my computer" or open folders without it crashin explorer.
hey all,
I was wondering if anyone has tried the combination of MacOS and ASUS services, including myCloud and myNet
I have been successful in using Teamviewer, inside my own home network, and had managed to use SplashTop mac version too, but MyNet service seems more complicated, first I do not know of a service which would let me set up a media server on macOS, so that I can stream files and videos on my transformer. anyone has suggestions?
also, is there a way to use splashtop service from outside of our network?
one last question : how can i click on items when i am using team viewer?
any help is greatly appreciated
I always meant to look into it on my galaxy S but didnt bother.
But what's the optimal way to access some shares?
I have several shared drives, permissions ok, work across other pcs on network, bluray media player and 360 work fine.
I tried astro viewer with the samba plugin but never got that to work.
I want to minimize the need for software on the PC itself since it's already setup with windows for sharing.
Edit: Got it. It apparently insists on an account with a password. *shrug* Quick crap account made, password assigned and to my delight admin shares show as well so no hassle of subfolder sharing.
I use an app called AndSMB, and it works perfectly for me. Allows you to choose the local and remote folder, and allows copying in both directions.
It's a freebie on the Market too.
Hi all,
Wondering if anyone has had any luck file sharing / streaming between the Fire and a PC / Mac running SMB / AFP?
Tried to make this happen with "File Expert" off the Android Market but the program didn't seem to pick up on my server though they are on the same Wi-Fi network / LAN and should be able to talk.
Any ideas? Thanks in advance!
I used astro file manager, then dl the smb addon. On my Pc I created a new User account with admin rights, make sure it has a password. Then in astro I just had to enter my pc's ip and the User/pass.
Not sure if you can set up the fire as a host to connect from Pc to the fire though.
CifsManager
Virtual Data Cable
Samba Filesharing
I am using File Expert for SMB transfers to my network without any issues at all. One thing to note is that I never could get it to connect using any machine node IDs, but using IPs, I have absolutely no issues with File Expert's SMB connection.
I use the emit app and server since the codecs are very limited on the fire, it converts in real time and works great locally or remotely
Sent from my Kindle Fire using xda premium
If your Kindle Fire is rooted, there is a program called Samba Filesharing. It will put your Kindle on the local network and you can get to it from your PC via WiFi. For accessing your pc via your WiFi network there are many apps. I use ES File explorer and File Expert.
keithjeffrey said:
Hi all,
Wondering if anyone has had any luck file sharing / streaming between the Fire and a PC / Mac running SMB / AFP?
Tried to make this happen with "File Expert" off the Android Market but the program didn't seem to pick up on my server though they are on the same Wi-Fi network / LAN and should be able to talk.
Any ideas? Thanks in advance!
Click to expand...
Click to collapse
If you're on a Mac running Lion, you are better off turning off File Sharing, downloading MacPorts and installing Samba 3. SMB is sort of b0rked in Lion. I spent days fiddling with it and searching online for help. I finally came across an article about SMB in Lion. That recommended going the MacPorts route.
Sent from my Kindle Fire using xda premium
So since I've tried many softwares that fail to preserve date created, date modified date accessed timestamps of pics and videos and documents because MTP is such a hassle to deal with. I have partially given up so I've resorted to FTP, samba and webDAV fileshares.
I was looking at samba fileshares and I was wondering if we can connect android phone to the PC and view the files that way and can we mount/assign a drive letter to a samba fileshare and use it like a regular local disk ? Does anyone know how to set up a samba server on android and connect that to the PC and assign it a drive letter?
Many thanks,