For all you guys that want Viper4Android working on NOUGAT - Honor 8 Guides, News, & Discussion

PROPS to all those hardworking developers who developed all these apps!
First of all u need root and TWRP recovery;
Then install BusyBox by meefik, important that you download the right one.
Put the latest Viper4android v2.5.0.5 (Android 4.0~7.0) https://forum.xda-developers.com/sho....php?t=2191223 in your sd card or external card. Mine can only read the external sd card.
Flash via TWRP.
BEFORE you open the app. install https://forum.xda-developers.com/and...ernel-t3333549
Then open the Kernel Auditor app then go to the Misc Controls. Set the apply on boot. Toggle SE Linux to Permissive.
Now you will be able to open viper and it should be working just fine!
When you reboot your phone, it will take five seconds for the kernel auditor to set the kernel to Premissive-mode.

chrisss5000 said:
Put the latest Viper4android v2.5.0.5 (Android 4.0~7.0) https://forum.xda-developers.com/sho....php?t=2191223 in your sd card or external card. Mine can only read the external sd card.
BEFORE you open the app. install https://forum.xda-developers.com/and...ernel-t3333549
Click to expand...
Click to collapse
Hi Christopher,
thanks for that information, but the links you posted are are not complete / don't work. Could you please correct them?
Christian

skyball2 said:
Hi Christopher,
thanks for that information, but the links you posted are are not complete / don't work. Could you please correct them?
Christian
Click to expand...
Click to collapse
Never mind, I think Ifound them:
Viper4Android: https://forum.xda-developers.com/honor-8/themes/viper4android-2-5-0-5-installation-t3468389
Kernel Adiutor: https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549

Not working failed driver installation

not working for me driver install failed : I/O error

Try https://mega.nz/#!Hgg2FArT!nNsEameb8JdMJIMNQKy-EkJy3wXLFfFqESQ_fC6tnS0
It work if u have busybox
Sent from my CUBOT_MANITO using Tapatalk

LastStandingDroid said:
Try https://mega.nz/#!Hgg2FArT!nNsEameb8JdMJIMNQKy-EkJy3wXLFfFqESQ_fC6tnS0
It work if u have busybox
Sent from my CUBOT_MANITO using Tapatalk
Click to expand...
Click to collapse
Hallelujah, it works.:good:

Synthi said:
Hallelujah, it works.:good:
Click to expand...
Click to collapse
I know I used it many times after I read why the driver installation failed
So I put together a zip for myself
Sent from my ALE-L21 using Tapatalk

Related

Enable swap partition:Swapper2.

Firstly i would like to say i prefer swap partition rather than .swp file created by Swapper2 as its highly unstable for me.
After searching the forum for many days and of course Google I was left with no answers and many errors,but today i accidentally found this while performing numerous try-errors methods.
My cards divided into 3 parts Fat32,ext3,swap(order is important)
After installing Swapper2 from market i directed it to use my swap partition via advanced settings.
The swap default path i.e "/dev/block/mmcblk0p3" gave errors like 'No such directory exists"
So i set it to "/dev/block/vold/179:3"(3-third partition)
then set swapper to start at start-up ,boot into recovery,fix permissions(don't skip this),reboot system.
and Viola swap partition was mounted!
To check swap,type free in terminal.
Thought this would help someone.
sanmit said:
Firstly i would like to say i prefer swap partition rather than .swp file created by Swapper2 as its highly unstable for me.
After searching the forum for many days and of course Google I was left with no answers and many errors,but today i accidentally found this while performing numerous try-errors methods.
My cards divided into 3 parts Fat32,ext3,swap(order is important)
After installing Swapper2 from market i directed it to use my swap partition via advanced settings.
The swap default path i.e "/dev/block/mmcblk0p3" gave errors like 'No such directory exists"
So i set it to "/dev/block/vold/179:3"(3-third partition)
then set swapper to start at start-up ,boot into recovery,fix permissions(don't skip this),reboot system.
and Viola swap partition was mounted!
To check swap,type free in terminal.
Thought this would help someone.
Click to expand...
Click to collapse
I tried the method above but i coudnt get my swapper2 to point to the external partition. Would be obliged if someone helped me on this issue ..
Also, please can you tell me how to make swapper2 work,
I have the following order "fat32/swap", parted on my sd card.
Am new to the forums. please guide me..
Thanks and sorry for my poor english.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2
MeAt.HoOk said:
I tried the method above but i coudnt get my swapper2 to point to the external partition. Would be obliged if someone helped me on this issue ..
Also, please can you tell me how to make swapper2 work,
I have the following order "fat32/swap", parted on my sd card.
Am new to the forums. please guide me..
Thanks and sorry for my poor english.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2
Click to expand...
Click to collapse
easy. pls upgrade from m6 to rc1 or rc2 then the swap will enable automatically(there is a command in the rom no settings needed) to check use terminal emulator, in the terminal type "free" and all the swap mem and stuff will pop out
Thanx for the reply bro .. Also .. As you advised, I upgraded to RC1.
So i want to get the following doubts clear,
> Now that i have upgraded to RC1, do i need to install Swapper2 ?
> Will just partitioning my card as fat32/swap work ?
> Do need to do anything to make the swap partition to work ?
> If the TERMINAL shows up SWAP space, does it mean that the SWAP space is working ? .....
Am a real noob when it comes to SWAP partitions ..!
Am new to the forums. Please guide me..
Thanks and sorry for my poor english.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)(Supercharged v6)
MOD : SwiftDroid v2.0 RC1 (Based on CyanogenMod v7.1 RC1)
KERNEL : 2.6.29 (VirtualBox #10)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
best is to backup sdcard stuff on computer and then remove all partitions. then go to recovery, partition sdcard, choose size and swap size. powerdown phone put stuff back in sdcard, reboot, in terminal type free and you should see
-----total--------used-----free
swap:XXXXXX--- XXXXX---XXXXXX
well the XXXXX is different from phone to phone and there should be numbers
Thanx a lot for a immediate reply .. Really appreciate it .. Thank you ..
Am new to the forums. Please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)(Supercharged v6)
MOD : SwiftDroid v2.0 RC1 (Based on CyanogenMod v7.1 RC1)
KERNEL : 2.6.29 (VirtualBox #10)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
?
How unstable is the the .swp file method?
jhonnyx1000 said:
How unstable is the the .swp file method?
Click to expand...
Click to collapse
never got to try but i think the recovery method is the best
jhonnyx1000 said:
How unstable is the the .swp file method?
Click to expand...
Click to collapse
.swp method is a bit unstable as you require to unmount swap before you connect usb.....also the swap file. Swp gets mounted after your cell starts while swap partition is mounted during boot itself which is more convenient and fast.
Sent from my GT540 using XDA App
> Now that i have upgraded to RC1, do i need to install Swapper2 ?
No you wont require swapper unless you want to change swappiness.....which is set to 30 default in RC1 ......i prefer 10.
> Will just partitioning my card as fat32/swap work ?
Yes it would.
> Do need to do anything to make the swap partition to work ?
No it would load/mount itself during boot.
> If the TERMINAL shows up SWAP space, does it mean that the SWAP space is working ? Yes
Sent from my GT540 using XDA App
MeAt.HoOk said:
I tried the method above but i coudnt get my swapper2 to point to the external partition. Would be obliged if someone helped me on this issue ..
Click to expand...
Click to collapse
Substitute 179:3 by 179:2 as your 2 nd partition is swap.
Sent from my GT540 using XDA App
sanmit said:
> Now that i have upgraded to RC1, do i need to install Swapper2 ?
No you wont require swapper unless you want to change swappiness.....which is set to 30 default in RC1 ......i prefer 10.
> Will just partitioning my card as fat32/swap work ?
Yes it would.
> Do need to do anything to make the swap partition to work ?
No it would load/mount itself during boot.
> If the TERMINAL shows up SWAP space, does it mean that the SWAP space is working ? Yes
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
you should make a thread teaching people how to enable swap using recovery
bs828 said:
you should make a thread teaching people how to enable swap using recovery
Click to expand...
Click to collapse
Thats what this thread is about
Sent from my GT540 using XDA App
sanmit said:
Thats what this thread is about
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
too messy
YAY 100 POST SENIOR MEMBER LOL
Usefull for some......that purely an individual call.
Sent from my GT540 using XDA App
What does swappiness mean is greater better?
Greater number = more swap memory
Can someone explain and tell me the file to edit in cm7 to set swappiness
Sent from my GT540 using Tapatalk
Edit file in text editor. ....path system/etc/init.d/07swapon.
By default it is set to 30/60 in rc1/rc2 respectively.
Swapiness 10 is stable for me.
And yes greater the number more it swaps.
Sent from my GT540 using XDA App
sanmit said:
So i set it to "/dev/block/vold/179:3"(3-third partition)
then set swapper to start at start-up ,boot into recovery,fix permissions(don't skip this),reboot system.
Click to expand...
Click to collapse
Thank you for sharing this.
I did just as you said, but it keeps on telling me that "invalid argument",
however, it also said that "enabling swap partition OK" and "formating swap partition OK".
So.....did I make it?
or I failed?
and what is "boot into recovery,fix permissions"?
I use ROM Manager and flash Clockword Mod Recovery, I can't see where to fix permission?
kosang said:
Thank you for sharing this.
I did just as you said, but it keeps on telling me that "invalid argument",
however, it also said that "enabling swap partition OK" and "formating swap partition OK".
So.....did I make it?
or I failed?
and what is "boot into recovery,fix permissions"?
I use ROM Manager and flash Clockword Mod Recovery, I can't see where to fix permission?
Click to expand...
Click to collapse
1.update busybox via swapper application.(even if you have an upto date busy box)
2.Open terminal and put in the following commands-
Su
Free
If swap partion is activated it will show the size of swap partion ,else zero.
3.Rom manager!! I don't think you own optimus Gt540.
Sent from my GT540 using xda premium
swap size
which swap size is recommended for most smoothness ?
or shouldn't i use swap for better performance ?
please help

UMS Mounter

Hi all,
First thread here .
So, on with it. I've been a member on this forum for quite some time, but never felt like posting or anything as I didn't have anything interesting to share and all the questions I might've got at some point got already answered...
Anyway, about a year a go I bought a Samsung Galaxy S III. Cute little 'monster', powerful and all... and I got hit by MTP. I'm a Linux user, so getting MTP to work was a huge pain. So I started reading, digging, found out that some guys already implemented some scripts for mounting the external SD as UMS... the problem was that they didn't work on my end.
So I developed my own little app. Nothin' fancy, two buttons to switch from MTP to UMS and back.
In the meanwhile, I changed my phone to a Note 2 LTE and did some more tweaking on my app and now I'm kinda ready to share it with you guys:laugh:.
You need to have a rooted phone equipped with busybox (my app will prompt warnings telling you you're not rooted or you don't have busybox, but I thought it was nice to tell you here the requirements).
One small thing, besides the usual "I'm not responsible to any damages brought to your phone and all": after transferring to / from your SD card, please use the eject command (or the safety remove feature on Windows) to unbind the card from your operating system before changing back to UMS. That way you ensure no harm is brought to you SD card or to the data on it.
All that being said, you can download the app from here: devver.ro/ums-mounter/ (I don't have enough posts to give an external link, so you'll have to enter the text manually in your browser). The text on that page is written both in Romanian (my native language) and English so there shouldn't be any problems .
This app should work on every device that has an SD card and runs Android 4.3+. Oh yeah, there might be some glitches on devices with Samsung's official releases (bummer, I know), but that's related to some screw-ups on their end, 'cause they're random from ROM to ROM.
Anyway, hope you'll like it (if you test it). If you have and problems, comment here and attach a logcat and I'll see if I'm smart enough to help you.
== 2014-06-10 ==
Version 1.1
Changes:
- please uninstall the previous version, as I've changed the signature on the file ;
- added a small sanity check which will force you to unplug your phone from the computer before switching between modes (hopefully this will also force you to safely remove the external sd card );
- fixed (i hope at least) the situation where the card is not mounted as usb on Touchwizz related ROMs;
As usual, the app can be downloaded from devver.ro/ums-mounter. Thanks again for testing .
sleepwalker123 said:
This app should work on every device that has an SD card and runs Android 4.3+.
Click to expand...
Click to collapse
It mounts the card slots (although it needs a reboot sometimes), but the PC shows up two empty usb slots and the sd card is not mounted.
Im running DN3 V5+.
I do hope you can fix it.
Thank you.
@erljayp: that's one ROM which is based on a stock ROM and, as I mentioned in my OP, there might be glitches woth 'em.
I'll setup my phone into dual booting so that's gonna be a bit easier to test these ROMs and hopefully sort them out.
Thanks for testing my little app
your app said that i haven't installed busybox yet. then i tried to install busybox from play store and it said the same. what problem?
ectv96 said:
your app said that i haven't installed busybox yet. then i tried to install busybox from play store and it said the same. what problem?
Click to expand...
Click to collapse
I've used play.google.com/store/apps/details?id=stericson.busybox to install busybox. Basically, after you install the app from the play store, you need to open it in order for it to actually download and install the busybox binaries. If you just downloaded the app from play store but didn't actually open it, that may be the problem
sleepwalker123 said:
I've used play.google.com/store/apps/details?id=stericson.busybox to install busybox. Basically, after you install the app from the play store, you need to open it in order for it to actually download and install the busybox binaries. If you just downloaded the app from play store but didn't actually open it, that may be the problem
Click to expand...
Click to collapse
oh yes, it works. thankyou :good::laugh:
New version, please check OP. Should resolve the DN3 related issues (this should apply to all ROMs which are based on stock Samsung). 'Njoy!
sleepwalker123 said:
there might be glitches woth 'em.
Click to expand...
Click to collapse
I thought you were talking about the "stock" rom. haha.
sleepwalker123 said:
Should resolve the DN3 related issues.
Click to expand...
Click to collapse
Now working in DN3 V5+, but I have fluctuating transfer rates. What is the average transfer rate you have?
Thank you.
@erljayp: i get about a maximum of 2 MB/s transferring a file bigger than 50-100 MB, which I find quite satisfying. Also, if I'm not mistaking, the transfer rates are influences by a lot of factors: the card's class, if you're transferring a lot of small files (mp3's, for example) etc.
Anyway, glad that sorted your problem. Like I said before, my app should now work not only on the DN3, but on all ROMs (CM11 based, AOSP, AOKP, ROM's based on the stock Samsung release). If you find a ROM that won't work, Iemme know and I'll see what's to be done about it .
sleepwalker123 said:
@erljayp: i get about a maximum of 2 MB/s transferring a file bigger than 50-100 MB, which I find quite satisfying. Also, if I'm not mistaking, the transfer rates are influences by a lot of factors.
Click to expand...
Click to collapse
I guess mine is normal.
Well, thank you very much for this great app and goodluck in your future projects.
sleepwalker123 said:
Hi all,
First thread here .
So--------.
Click to expand...
Click to collapse
The App crashes when trying to switch the pages.
Is this working on 4.4.2 TW roms ?
aukhan said:
The App crashes when trying to switch the pages.
Is this working on 4.4.2 TW roms ?
Click to expand...
Click to collapse
Don't try and switch pages All you need to do is "play" with the 2 buttons. I think the "page" you're referring to is something i use for debugging.. will remove it in a future release
sleepwalker123 said:
Don't try and switch pages All you need to do is "play" with the 2 buttons. I think the "page" you're referring to is something i use for debugging.. will remove it in a future release
Click to expand...
Click to collapse
I use Switch UMS and connect USB is that right any requirements to run the app apart from Root and busybox ?
aukhan said:
I use Switch UMS and connect USB is that right any requirements to run the app apart from Root and busybox ?
Click to expand...
Click to collapse
Nope. Those are the only requirements. Could you please give me a link to your ROM's thread?
sleepwalker123 said:
Nope. Those are the only requirements. Could you please give me a link to your ROM's thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=36202763#post36202763
Does this support windows or only linux??
aukhan said:
http://forum.xda-developers.com/showthread.php?p=36202763#post36202763
Does this support windows or only linux??
Click to expand...
Click to collapse
Grr... can't test that one...
Could you please connect your phone to your, connect into an adb shell, run mount and give me the output? Or if you have the Terminal Emulator app installed, do it from there and gimme the output.
sleepwalker123 said:
Grr... can't test that one...
Could you please connect your phone to your, connect into an adb shell, run mount and give me the output? Or if you have the Terminal Emulator app installed, do it from there and gimme the output.
Click to expand...
Click to collapse
You want me to run this # mount in terminal emulator and give you the results ?
Should i be connected to PC or not ?
aukhan said:
You want me to run this # mount in terminal emulator and give you the results ?
Should i be connected to PC or not ?
Click to expand...
Click to collapse
You don't have to be connected to the computer. Try and run the following in the terminal emulator:
- su (if you didn't);
- mount > /sdcard/mount.log
And after that, on your internal storage you shall find a file called mount.log. Give me the contents of that file, please.
sleepwalker123 said:
You don't have to be connected to the computer. Try and run the following in the terminal emulator:
- su (if you didn't);
- mount > /sdcard/mount.log
And after that, on your internal storage you shall find a file called mount.log. Give me the contents of that file, please.
Click to expand...
Click to collapse
Usage: mount [-r] [-w] [-o options] [-t type] device directory.
aukhan said:
Usage: mount [-r] [-w] [-o options] [-t type] device directory.
Click to expand...
Click to collapse
I think you ran the command including the dash ("-" sign).
Perhaps i didn't express myself well enough, sorry...
1). su (for gaining root access, no matter if you're doing this from the terminal emulator or from your pc);
2). mount > /sdcard/mount.log
Again, sorry for the confusion.

[GUIDE][MULTIBOOT] Multiboot ROMs on Lenovo K3 Note

I'm NOT the developer/creator of this app/method. Chenxiaolong is. Here's the link to the official thread: http://forum.xda-developers.com/showthread.php?t=2447534
Credits: @chenxiaolong - This guy is just great. Our device required many additional hacks and changes to work because of its crappy closed-source update-binary and closed-source Mediatek sources. This awesome dev had to work a lot to get this work fully on our device. Yes, he did. Debug builds, logs, debugging, reworking and all, and he never stopped. That's just amazing. So, I want to thank him wherever you see his post and if you can PLEASE donate as your token of appreciation. :good::fingers-crossed:
@911-Future_Maker Some help and tips in the initial stages.
@FeyoMx Initial helps since my phone wasn't rooted then.
Me. No I'm not exaggerating. I did my fair share of work in testing debug builds and providing logs and testing again. So, press thanks if this worked for you :victory:
Disclaimer:
Neither I nor the dev is responsible for any damage this app does to your device.
You MUST have a nandroid backup in case something bad happens.
Only do something after the whole thread a few times.
Yes, this is true multibooting. Install as many ROMs as our internal storage allows. I can't install more than 3 ROMs (on extsd-slot) as I have a lot of apps.
Here's the procedure:
1- Download the latest version of the app from https://snapshots.noobdev.io and the DualBootUtilities.zip (https://snapshots.noobdev.io/DualBootUtilities-8.0.0.r2162.gc717564.zip)
Note: Only version 8.0.0.r2157.g7d47ab8 and newer completely supports our device.
2- Select ROMs from the navigation drawer of the app on the left
3- Grant supersuser/root rights when it asks
4- Click "Set kernel" if it is asked.
5- Click the three-dot menu on the first ROM, which will be your current ROM.
6- Scroll down and click update ramdisk
7- Reboot
8- Select "Patch Zip file" from the navigation drawer
9- Press the + button and select the zip of the ROM you want to install.
10- Select the slot to which you want to install the ROM.
Take either a data-slot or an extsd-slot.
I recommend using an extsd-slot because the internal memory gets full very fast. Even if you install to extsd-slot, only /system/ is stored on the SD card because having data and cache as image files on the SD card shortens its lifespan by almost a week.
11- Patch the GApps, Xposed or any other zip you want to install to this ROM the same way giving the extsd-slot number you gave for the ROM.
12- Install the patched zip. There are two ways:
I) in recovery (highly recommended)
II) through the built-in zip flasher. Click on the circle in the ROMs page. Add the zips with the plus button. Click the tick.
13- Reboot. It'll automatically reboot the new ROM if it was installed successfully.
14- Voila!! You are now multibooting!
To switch between ROMs, you need the Dual Boot Patcher app on that ROM. Navigate to ROMs, and click you ROM you want to switch. A tick will appear.
Reboot.
EDIT: Forgot about app sharing. Here it is
App Sharing:
Yes, this feature allows you to share the data of your apps across the ROMs. That means you'll have your Chrome tabs open as you left it in the other ROM. Cool !
Instructions:
1- Navigate to App Sharing settings in the navigation drawer.
2- Select "Share individual apps" and reboot.
3- Select the apps you want to share in "Manage shared apps" and select "Use shared data".
4- Reboot to the same ROM. This is very important. If you switch ROMs, you'll lose your data and you will have uncheck "Use shared data" to get it back.
5- Reboot to the ROM with which you want to share data.
6- Install the app if it isn't installed.
7- Do the same as steps 2, 3 and 4 in that ROM. Yes, rebooting to another ROM there can also result in data loss.
8- You will now have the same data across all those ROMs :victory:
I've tried sharing WhatsApp, Google Chrome, a game and Tapatalk and all these work perfectly fine.
Bugs:
I haven't seen any (of the app, do NOT report ROM bugs here)
If you find any, provide logs. If it was while installing provide the recovery.log from TWRP>Settings>Copy logs to SD
If ROM not booting, flash GetLogs.zip from the website (link: https://snapshots.noobdev.io/misc/getlogs/GetLogs-20160120.zip)
If a ROM is not booting, don't worry, reboot to recovery, and flash the DualBootUtilities.zip and switch to primary ROM.
N.B.: The touch screen doesn't work in AROMA on our device. So, navigate using volume buttons. It's a bit weird, but you'll get you used to it.
Yes, it's risky. That's why you should have a nandroid backup.
I'll try to help you as much as I can, but I'm not a dev. So, if you provide logs, I'll see and if it is something new, I'll tell the dev. He is usually busy.
N.B.: This whole post was written on my phone, so it's bad, I know. I'll edit it when I get time.
Please press thanks if I have helped you.
Good guide but if the roms support sdcard as default storage then its worth dual booting
Congrats for this great tutorial my friend! I'm sure it will help many peeps having questions around. Also thanks for mentioning me in the credits.
---------- Post added at 18:34 ---------- Previous post was at 18:30 ----------
sandeep.sethi said:
Good guide but if the roms support sdcard as default storage then its worth dual booting
Click to expand...
Click to collapse
Why? You can dualboot no matter what's your default write disk. You must just have enough free space. Using 4 roms currently, my default disk is internal storage and my primary rom has a tons of apps installed. Btw @sandeep.sethi I'm having problems trying to dualboot your latest AICP rom. :laugh: 5 fast vibrations and back to recovery.
911-Future_Maker said:
Congrats for this great tutorial my friend! I'm sure it will help many peeps having questions around. Also thanks for mentioning me in the credits.
---------- Post added at 18:34 ---------- Previous post was at 18:30 ----------
Why? You can dualboot no matter what's your default write disk. You must just have enough free space. Using 4 roms currently, my default disk is internal storage and my primary rom has a tons of apps installed.
Click to expand...
Click to collapse
4 roms ? are they all vibeui based ??
whats ur internal memory space left
---------- Post added at 10:10 PM ---------- Previous post was at 10:06 PM ----------
911-Future_Maker said:
@sandeep.sethi I'm having problems trying to dualboot your latest AICP rom. :laugh: 5 fast vibrations and back to recovery.
Click to expand...
Click to collapse
i dont know bro maybe space is interferring it
sandeep.sethi said:
4 roms ? are they all vibeui based ??
whats ur internal memory space left
Click to expand...
Click to collapse
Of course, screenshot attached. Unfortunately only around 500MB free internal storage.
911-Future_Maker said:
Of course, screenshot attached. Unfortunately only around 500MB free internal storage.
Click to expand...
Click to collapse
its the problem
internal space will be less available
sandeep.sethi said:
its the problem
internal space will be less available
Click to expand...
Click to collapse
Wait! That was an old shot my bad. The one attached below is representing my current usage. I'm using BlissPop, it's a monster.
Interestingly enough I'm same person with the guy who's using the niklabs username @needrom. lol Nice to meet you mate.:highfive:
To be honest 4 roms are overkill, 3 roms can serve me just fine.
sandeep.sethi said:
Good guide but if the roms support sdcard as default storage then its worth dual booting
Click to expand...
Click to collapse
Thanks.
911-Future_Maker said:
Congrats for this great tutorial my friend! I'm sure it will help many peeps having questions around. Also thanks for mentioning me in the credits. [emoji14]
---------- Post added at 18:34 ---------- Previous post was at 18:30 ----------
Why? You can dualboot no matter what's your default write disk. You must just have enough free space. Using 4 roms currently, my default disk is internal storage and my primary rom has a tons of apps installed. Btw @sandeep.sethi I'm having problems trying to dualboot your latest AICP rom. [emoji23] 5 fast vibrations and back to recovery.
Click to expand...
Click to collapse
Thanks. You are welcome [emoji6]
Sent from my Lenovo K3 Note (K50-T5) using Tapatalk
911-Future_Maker said:
Wait! That was an old shot my bad. The one attached below is representing my current usage. I'm using BlissPop, it's a monster.
Interestingly enough I'm same person with the guy who's using the niklabs username @needrom. lol Nice to meet you mate.:highfive:
To be honest 4 roms are overkill, 3 roms can serve me just fine.
Click to expand...
Click to collapse
nice to meet you too
failed to flash zip
Sir I'm not able to flash zip. I'm getting error. Image is attached below. Please help
Pradeepnegi said:
Sir I'm not able to flash zip. I'm getting error. Image is attached below. Please help
Click to expand...
Click to collapse
Which is your ROM??
It's because of the ro.build.product of your build.prop
Sent from my Lenovo K3 Note (K50-T5) using Tapatalk
Pradeepnegi said:
Sir I'm not able to flash zip. I'm getting error. Image is attached below. Please help
Click to expand...
Click to collapse
This is easy. I'll guess you're installing MIUI or CM right? Because these roms usually contains this limitation about "hermes" only devices. Just open the updater-script which can be found in META-INF/com/google/android path, open it as text via some root file manager and edit it removing the following lines:
Code:
getprop("ro.product.device") == "hermes" || abort("This package is for \"hermes\" devices; this is a \"" + getprop("ro.product.device") + "\".");
Success.
Hey @Salman A. bro I have a little update on your question about that can we install a VibeUI on extsd-slot or in any other slot different than primary. Good news - it works like a charm, screen attached from last night when I was again playing with flashing roms on my phone lol.
Installed VibeUI_1604_ST on extsd-slot all working, I just edited the updater-script to prevent boring errors like that one above removing these line:
Code:
getprop("ro.product.model") == "Lenovo K50-t5" || abort("This package is for \"Lenovo K50-t5\" devices; this is a \"" + getprop("ro.product.model") + "\".");
So now running VibeUI from my extsd card lol, I flashed it just to confirm it's possible, but I think I'll wipe it and flash it again as primary because I mostly play games on VibeUI and I don't want to run a heavy game from my extsd while the entire phone system is also running from the card. It will slow down the things.
Meanwhile I still can't make the AICP rom by sandeep a multiboot ready. Sometimes it hangs at the logo, sometimes vibrates 5 times and reboots back to recovery. I posted at the dualboot thread and really hope that Chen will help me.
911-Future_Maker said:
Hey @Salman A. bro I have a little update on your question about that can we install a VibeUI on extsd-slot or in any other slot different than primary. Good news - it works like a charm, screen attached from last night when I was again playing with flashing roms on my phone lol.
Installed VibeUI_1604_ST on extsd-slot all working, I just edited the updater-script to prevent boring errors like that one above removing these line:
Code:
getprop("ro.product.model") == "Lenovo K50-t5" || abort("This package is for \"Lenovo K50-t5\" devices; this is a \"" + getprop("ro.product.model") + "\".");
So now running VibeUI from my extsd card lol, I flashed it just to confirm it's possible, but I think I'll wipe it and flash it again as primary because I mostly play games on VibeUI and I don't want to run a heavy game from my extsd while the entire phone system is also running from the card. It will slow down the things.
Meanwhile I still can't make the AICP rom by sandeep a multiboot ready. Sometimes it hangs at the logo, sometimes and vibrates 5 times and reboot back to recovery. I posted at the dualboot thread and really hope that Chen will help me.
Click to expand...
Click to collapse
That's great! I'll try out the MM ROM then.
Sent from my Lenovo K3 Note (K50-T5) using Tapatalk
Salman A. said:
That's great! I'll try out the MM ROM then.
Sent from my Lenovo K3 Note (K50-T5) using Tapatalk
Click to expand...
Click to collapse
Wait! I forgot to mention that I also tried VibeUI_1606 from needrom and it while it had instaled fine it doesn't boot! Got stucked at the logo... I don't know for the other MM roms, you may want to try 1605 as I already tried 1606 and as you can see without success. So may be no multiboot for MM for now...if you have enouh space on internal you may try and report. So the bottom line:
VIBEUI_1604_ST Android 5.1 is working
VIBEUI_1606_DEV Android 6.0 won't boot.
Phone: Lenovo K3 Note
ROM: 04_K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
Kenrnel fix successful but in primary ROM While updating ram disk it gave error
log file attached
Please help
Using the latest Dualboot 2162 build with the VibeUI_3.1_1606 - can't update the ramdisk and also not indicating that the primary rom is the currently running.
I still can switch to other rom via the utilities zip so for now it's a compromise that I chose to make.
Salman A. said:
Which is your ROM??
It's because of the ro.build.product of your build.prop
Sent from my Lenovo K3 Note (K50-T5) using Tapatalk
Click to expand...
Click to collapse
Now I have installed k3 note mm 6.0 ui 3.5 dev 1605 row cuoco92 as the primary ROM.
And again same error I m having. But now it is saying this device is aio otfp m. Please help. Even I m not able to update ramdisk.
911-Future_Maker said:
This is easy. I'll guess you're installing MIUI or CM right? Because these roms usually contains this limitation about "hermes" only devices. Just open the updater-script which can be found in META-INF/com/google/android path, open it as text via some root file manager and edit it removing the following lines:
Code:
getprop("ro.product.device") == "hermes" || abort("This package is for \"hermes\" devices; this is a \"" + getprop("ro.product.device") + "\".");
Success.
Click to expand...
Click to collapse
Sir where to find this folder meta inf
Pradeepnegi said:
Sir where to find this folder meta inf
Click to expand...
Click to collapse
In the ROM zip.
Pradeepnegi said:
Now I have installed k3 note mm 6.0 ui 3.5 dev 1605 row cuoco92 as the primary ROM.
And again same error I m having. But now it is saying this device is aio otfp m. Please help. Even I m not able to update ramdisk.
Click to expand...
Click to collapse
You have to change ro.build.product to aio_otfp without _m in your build.prop. If you are still trying that zip, you will still have to edit the updater-script. My advice, don't use it. That's very old. Try the new CM 12.1 Beta 3
Sent from my Lenovo K3 Note (K50-T5) using Tapatalk

ViPER4ANDROID not working

I flashed the OTA (SOAK TEST (NOGAUT) and rooted my device and installed busybox, and after that I flushed viper4android, but the sarrow is its not working???? any body give remedy please........
Thanks in advance
Vendor>etc> . Rename audio.settings.conf to audio.settings.conf.bak.You'll get viper working
syedhmed said:
Vendor>etc> . Rename audio.settings.conf to audio.settings.conf.bak.You'll get viper working
Click to expand...
Click to collapse
The problem still exists....??
I changed as you said but it's becoming unsupported file....??
I figured it out.... It's selinux mode. Changed to permissive now it's working.....???
naveen135 said:
The problem still exists....
I changed as you said but it's becoming unsupported file....
Click to expand...
Click to collapse
1) Install BusyBOX and run Install there module
2) Install Selinux put in permissive mode,... tadaa it will work

Using "Google Assistant" in other than pixel phones

Using "Google Assistant" in other than Google Pixel Phones
Link : https://forum.xda-developers.com/general/general/android-7-0-google-assistant-t3535257
All credits to Fknt00
Go to build.prop and add this line
ro.opa.eligible_device=true
Reboot profit!
Has anyone done this with their Z3+ (E6553) and if so, is it functional and smooth?
[email protected] said:
Using "Google Assistant" in other than Google Pixel Phones
Link : https://forum.xda-developers.com/general/general/android-7-0-google-assistant-t3535257
All credits to Fknt00
Click to expand...
Click to collapse
wyndorf said:
Has anyone done this with their Z3+ (E6553) and if so, is it functional and smooth?
Click to expand...
Click to collapse
Yes, mine is 6553, tested and working perfect.
awesome, which G-Assistant did you use?
[email protected] said:
Yes, mine is 6553, tested and working perfect.
Click to expand...
Click to collapse
I just activated successfully and tested okay. Not aware of other things. Check screen shot.
Can you give me quick run down on how you did this? I'm copying to sd card, and running flashtool, but can flash zips.
Any guidance you can give would be greatly appreciated.
[email protected] said:
I just activated successfully and tested okay. Not aware of other things. Check screen shot.
Click to expand...
Click to collapse
wyndorf said:
Can you give me quick run down on how you did this? I'm copying to sd card, and running flashtool, but can flash zips.
Any guidance you can give would be greatly appreciated.
Click to expand...
Click to collapse
Follow the guide by developer. The steps are as follows:
1. Copy zip to SD Card / Internal memory
2. Boot into Recovery (TWRP or else) and flash the zip.
3. Clear data of Google Apps & Google Services in settings -> Apps
Thats it.
[email protected] said:
I just activated successfully and tested okay. Not aware of other things. Check screen shot.
Click to expand...
Click to collapse
IS there a way to get volte on z3+(e6553)?Like by flashing zip files or roms or anything of that sort?

Categories

Resources