Database Users

How To: EB13 Froyo Download/Install and OTA!

- It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung)
- Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work.
Click to expand...
Click to collapse
"Force OTA"
UPDATE:: IF you cannot for whatever reason load the file to your SD Card, gmail yourself the link (below) and download it using Dolphin HD browser. I just confirmed it works on my phone, however, it does not work with the stock browser. Check the market for Dolphin HD, it's free. Client mode is set to desktop, which is under settings once in Dolphin HD. I was able to download the update.zip to the phone rather quickly over 4G Other browsers may work, I prefer that one though. Doesn't hurt to try. The stock one will not save the file, though will navigate to it.
As I first posted yesterday, there are [now 3] ways of downloading and installing the new EB13 Froyo release. If you have a Windows PC, there is a new utility that Samsung has released to flash the phone via PC. I personally couldn't get it to run on my Win 7 x64 laptop due to the enlarged font I run on my high-res laptop screen. Additionally, the 200MB file will wipe your phone completely clean. If you have a "trouble free" factory install of the current 2.1.1, the update method contained here is your best bet. Trouble free meaning that only bugs of the software are present. If you have issues above and beyond that of all other eclair users, you may want to completely wipe your phone.
The easiest and fastest method is to visit Samsung's Sprint Epic download page here http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR and click the "Software" link (Manuals is the default landing page) and download the 91.14MB File labeled as for MAC OS. You will notice the much larger windows download (200MB) which is not needed, and may not work.
After you download the zip file, copy it over to your SD Card in your phone by either hooking it up and mounting it as you would normally do to copy files to your phone, or as I did, place the Micro SD card into an adapter and insert it into your computer. Copy the .zip file you downloaded onto the SD card; do not place it into any directory.
With your phone powered off, insert the SD Card back into the phone and replace the battery cover. Now, while holding both volume up and volume down rocker buttons (yes, you can push both at the same time), hold the camera button down as well and then press and hold the power on key. You will hold all 4 buttons on the phone until it boots into the flash menu.
Use the volume down button to scroll to..
"Apply SDcard: Update.Zip"
Push the Home key on the bottom of the phone and the update will commence.
Once it's complete, the phone may reboot into the menu again, at which time you select "Reboot" and hit the home key again.
The phone may reboot a few more times after it's first boot, and it may take a few minutes to fully get up and running. If it acts strange for a few minutes, this is normal.
Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work. No ROMS, etc may be installed for the update to work. Before doing the update, go through your applications and uninstall anything you don't want / use.
You may also wait for the OTA update, but it will take a while to download, use up your battery, and you have to wait longer. It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung) DO NOT waste time using a link to another file, there is no point and only risk in obtaining the file from somewhere else.
Before I began, I copied things off of my SD card that I wanted and performed a format on it. If you have apps installed on the SD Card, and you choose to do this, you may need to reinstall them. Once the update was complete, I copied the directories and files back to the SD Card.
(STICKY worthy!) No other post has this info immediately at hand.

Bump. I am seeing new posts answered by this.......

i don't know

http://forum.xda-developers.com/showthread.php?t=963652
It's already been done...

Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.

NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Personally, I think Whosdaman's version is much more concise. Perhaps you meant yours is more convoluted or wordy? But hey, potato, tomato, right?

NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me

Whosdaman said:
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me
Click to expand...
Click to collapse
You're welcome. And I'm guessing he was referring to how you linked to Briefmobile and outside files?

NoSoMo said:
Perhaps you should read the steps and not just do a character count? Personally I wouldn't subject the information on my phone to a that of a file that someone put on a download site.
- Get update file
- Place on SD Card
- Boot phone in flash mode and begin
Odin not required
Absolutely, sure it's full of other info, but it's info that's been asked numerous times.
Click to expand...
Click to collapse
Fair enough about not wanting to DL something that you can't verify the source... On a positive note, those three steps are exceptionally concise!

Does this work on DK28 Froyo? Probably not, eh?

I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?

mynewepic10 said:
I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
Click to expand...
Click to collapse
This has been answered in one of those posts with several hundred replies (if I had the answer on-hand, I would post it). I kept the Epic stock to avoid any issues, so my update was rather simple. A few people have already had to reload their phones a couple of times before everything worked out.
nonzenze said:
Does this work on DK28 Froyo? Probably not, eh?
Click to expand...
Click to collapse
DK28 wasn't official. The latest official release is DI18 - 2.1.1. This updates STOCK 2.1.1 ONLY.
I didn't care to fool with the phone originally due to not knowing the exact release date of froyo. It has been way over due, but I honestly didn't have any reason to mod. Froyo has enhanced the phone, but honestly doesn't provide anything new that would change the way I already use the device. GPS is faster to acquire in google maps, but in GPS Test, it was always fairly instant. It's also reports more accurate, reports being key, it wasn't ever off but by 20 feet anyway, which is about all you can expect on 3D accuracy.

I used the .exe file from Samsung website to flash my phone and works like a champ.
Now some minor quirks with Froyo but will address them in different threads.
Thanks for the help!!
Dakrk

Updated the post, you can download the file directly to the phone. Send yourself the link via gmail....and read the first post of this thread.....

This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!

D623 said:
This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!
Click to expand...
Click to collapse
Glad to hear it

Doesn't work on DK28

Thank you for the clear instructions
I appreciated all the details in your instructions.
I downloaded to a blank xtra SD as you did and it all went very smoothly the first time.
Data, everything is retained.
Thank YOU.

up it goes

Thank you,i got bored waiting for ota.
Sent from Maxwell's shoe.

[Guide] Step by Step from Stock N910V 6.0.1 to hsbadr's CyanogenMod 13.0

Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
IMPORTANT: Read the ENTIRE instructions set before starting, make sure you know what you are getting into. I have been as straight forward as possible with my instructions to assist noobs with the procedure.
Mission Statement
The purpose of this post is to combine the following 4 guides, in an easy to read manner to help people get from a stock Note 4 Version running 6.0.1 to a fully rooted Note 4 running CM13.0
Guides Referenced and Summarized:
[Guide] A noob's guide to Perm Root & TWRP on Verizon Note 4 Retail 5.1.1 (BPA1) http://forum.xda-developers.com/note-4-verizon/general/guide-noobs-guide-to-perm-root-twrp-t3360883
[HOWTO] Bootloader Unlock and Upgrade to Marshmallow [N910V] http://forum.xda-developers.com/not...t/howto-bootloader-unlock-upgrade-to-t3398144
(no title, sub post #1403, describes going from CPD1 to Jasmine with CPF3 and Firmware/Kernel Patch) http://forum.xda-developers.com/showpost.php?p=67481370&postcount=1403
[ROM] [6.0.1] [UNOFFICIAL] CyanogenMod 13.0 [Jul 24, 2016] http://forum.xda-developers.com/note-4-verizon/development/cyanogenmod-t3253973
I will use large chunks from some of these guides, skip some parts not necessary and/or extrapolate/modify on the instructions given within.
Thankx & Achnologments
Main Contributors (I plagiarized, quoted, or sourced)
Robots_Never_Die
hsbadr
Tech Support
BickNasty
Feel like I missed you, it wasn't intentional....PM me and I'll consider adding you, if I feel you actually contributed in some way or I copied your work.
Satisfied Customers (Did my method work for you? Post a reply and let us know, I'll add you to the list)
jwp1299 - 1 hour
Viper-Link
keviinese - 1.5 hours
pfcland - 1.5 hours
Required Apps (Google Play) All Free
Search for and install these apps
eMMC Brickbug Check (free)
Required Downloads (note on version numbers: version numbers I specify are ones available at the time I wrote this guide. For most tool grab the newest version, such as Odin/ADB)
NOTICE Total size of Downloads is approximately 7 GB, some of the links may be slow! Time required may vary due to your network speeds, and luck with speeds from file hosts. (expect several hours)
ADB – minimal_adb_fastboot_v1.4.0_setup.exe
Odin - newest version (3.12.3 at time of writing)
Kingroot - Grab latest stable version, only grab NewKingroot(XXXXX).apk
Samsung USB drivers (windows) - newest version
Bootloader Unlock - samsung_unlock_n4-fix
TWRP - twrp-3.0.2-0-trltevzw.tar.md5
N910VVRU2BPA1_N910VVZW2BPA1_VZW.tar.md5
N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 (Alternate Torrent if slow: Torrent started by pfcland)
JasmineROM_v7.0_N910VVRU2CPF3.7z
N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.m d5.7z
Gapps For ARM SDK23 (Android 6.0) (mini version is recommended)
UNOFFICIAL CyanogenMod 13.0 Builds for Verizon Samsung Galaxy Note 4 (SM-N910V) (grab newest from top)
Xposed framework for ARM SDK 23 (NOTE: Grab both the xposed23.zip and XposedInstaller****.apk)
XPosed is OPTIONAL, but there are a lot of rooted apps that use the XPosed framework to get more control over your phone. Such as hiding mock locations for example.
NOTE: Internet is REQUIRED for KingRoot to function (grants temporary root, so ADP commands can be executed to unlock bootloader), at one point WiFi will NOT function but internet is still required. So a valid SIM with internet is required (Verizon will definitely work, others might[/] work)
NOTE: The entire installation will take an estimated 1-2 hours. (Not including time spent downloading) All steps are MANDATORY, do not SKIP anything....You've been warned
Install eMMC Brickbug Check (free) on your phone, and RUN IT. Your CID MUST start with 15. If it doesn't I can't help you, and this guide is not for you.
Install the Samsung USB drivers on your windows PC
Backup your phone, if you don't know how.....google it...And learn how, you will want to backup frequently. Every time you get to a point you can boot up into Android, backup...it's safer for you...I will not remind you again, this is on your head.
Disable Encryption on your phone, both the SD card and Device
Disable Samsung Phone Lockout. YOU MUST DO THIS OR ELSE!!!! (Settings > Security > Reactivation Lock)
Do 2 factory resets on your phone, one after another (hold volume up, home button, power when starting to enter recovery mode where you can reset phone). Not required but if you don't, you'll spend an extra hour or two doing this because Kingroot will crash/fail more often.
Boot up your phone in Download Mode (hold volume down, home button, power)
Open Odin3, Click the AP button and select the file N910VVRU2BPA1_N910VVZW2BPA1_VZW.tar.md5, once it checks it, goto options and make sure the Re-Partition is NOT selected. Now click start to flash and downgrade to Android 5.1.1.
Turn on your phone, and let it boot up.
Skip everything possible when setting up your phone. Don't even put in a google account, not necessary
Goto Setings and set the following
Settings > Security > Reactivation Lock = Disabled (EXTREMELY IMPORTANT, VERIFY)
Settings > Security > Unkown Sources = Enabled
Settings > Developer Options > USB debugging = Enabled
Developer options are unlocked by going to Settings > About Phone. Find "Build Number", and start clicking it till you get a message that Developer Options have been unlocked (about 10 clicks I believe, never counted).
Settings > Developer Options > Verify App via USB = Enabled (should be by default, CHECK)
Settings > Lock Screen = None
Settings > Display > Turn off Display = 10 Minutes
Plug your phone into your computer via USB, copy the NewKingroot****.apk to your download directory (samsung-sm-N910V\Phone\Download)
Install ADB onto your Windows PC. Select an easy directory such as c:\ADB
Copy the following file directly into the ADB directory
samsung_unlock_n4-fix
Open up command line interface. Hold windows key & press R key for run, type in "cmd" press enter. Will open a terminal window for you. Type the following commands:
cd\
cd adb (or whatever you named your directory where you installed ADB)
adb devices
This should return a list of devices you have connected, something like:
Code:
List of devices attached
SerialNum device
If no devices are displayed, check you have the Samsung USB drivers installed properly.
Type the following command
adb push samsung_unlock_n4-fix /data/local/tmp/
Got an error? check your spelling (or copy/paste from me), check you put the file into the ADB directory (not just a link), your phone must be on and screen not locked and check you have usb debugging enabled.
BTW: Do NOT CLOSE the window unless I instruct you to!
Install Kingroot on your phone, which you previously moved into your downloads folder, you can find it via My Files app that comes with phone.
Now run KingRoot. Flip down to the bottom and click "Try It", it will run some quick test then give you a button to try to root your phone.
Wait...Wait...Do not worry if your phone restarts, it will go back into KingRoot automatically on reboot. Just sit back and wait, it may fail multiple times and you may have to re-run Kingroot. Just keep trying . Once it succeeds you must do the following IMMEDIATELY AND AS FAST AS POSSIBLE. Kingroot is HIGHLY UNSTABLE.
On the windows PC, back in the command window you left open. Start Typing.
adb shell
su
cd /data/local/tmp/
chmod 777 samsung_unlock_n4-fix
chown root.root samsung_unlock_n4-fix
./samsung_unlock_n4-fix
After the last command it may prompt you to type yes, do so immediately. it won't write on the screen but type yes anyway for it to continue. Once it's done it should automatically start to reboot your phone. Unplug it and pull the battery, wait 5 seconds, put battery back in and plug the phone back in.
This was the initial setup for unlocking your bootloader, you now have to run it AGAIN so turn your phone back on. Repeat steps 22-24, after the 2nd time PULL OUT YOUR SD CARD BEFORE TURNING ON YOUR PHONE
Congratulations you now have an unlocked bootloader, you can close the command window on your PC.
The SD card has a restore point for your phone prior to removing your bootlock. Save it if you want, or plug into your phone and format the 18mb partition you are able to. You must format it on a PC before you can use it again in a phone!!!! Will shut your phone off immediately if you put the SD in without formatting that 18mb partition.
Now reboot your phone into download mode (hold volume down, home and power buttons when turning on)
Open Odin App on your PC, Click the "AP" button and select the file twrp-3.0.2-0-trltevzw.tar.md5 (which you downloaded earlier). Once it does it's check, verify that re-partition is NOT selected in options. Now click start to flash twrp bootloader.
Your phone will restart, re-enter download mode. If you missed it pull cable/battery and try again.
Now extract and flash N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 via Odin, same as you did with twrp. VERIFY THAT RE-PARTITION IS NOT SELECTED IN OPTIONS.
Boot up in recovery mode (hold volume up, home and power when turning on) (note: no longer TWRP since you flashed firmware, will look different again)
"Wipe data/factory reset ", then reboot your phone.
Now repeat steps 9-12 (NewKingRoot should still be in your downloads, but verify anyway) (NOTICE: wifi will NOT work with the CPD1 firmware, but Verizon internet should in case you need internet for some reason, wifi will restore later in guide - Other internet from other providers MIGHT work with proper APN settings)
Install a clean SD card into the phone.
Now repeat steps 15-25. This time you should only need to run the samsung_unlock_n4-fix file once to break your boot. This is what it typically says on successful bootloader unlock: (if you got this message, pull the battery, cable and SD card.)
Code:
[email protected]:/ # cd /data/local/tmp/
[email protected]:/ # chmod 777 samsung_unlock_n4-fix <
[email protected]:/ # ./samsung_unlock_n4-fix
============================== samdunk unlock 0.0.1 ==============================
NOTE 3 BETA UNLOCK!!!!!!!!!!!!!
this application comes with NO WARRANTY (express or implied)
this binary may not be rehosted, repackaged, one-clicked, etc.
there is no support provided for this application
this application has been tested on the Verizon Galaxy S5 only
it may work on the AT&T Galaxy S5, and possibly other similar Galaxy devices
there are no compatibility checks, do your research first
if run on an incompatible phone, it will likely permanently ruin the device
we STRONGLY advise against running any binary not obtained from the official source
official source is available at http://github.com/beaups/SamsungCID
SD card is required, all data on the SD card will be destroyed
changing to this developer CID may have other implications
the psn derived from the CID may be used for critical services
changing this psn may cause unexpected behavior or loss of services
continue at your own risk, you've been warned
aboot dev signature research credit to ryanbg
http://forum.xda-developers.com/member.php?u=766721
eMMC vulnerability, exploit, and the code you are running by beaups (sean beaupre)
http://forum.xda-developers.com/member.php?u=711482
Do you understand the implications of these warnings?
(Yes/No)
[+] CID at boot time is/was: 150100523231384d4100657e54fc1200
[+] dev CID matching, proceeding to unlock
[+] backing up loaders, this will take a few minutes
[+] loaders successfully backed up
[+] success! powering off device, hopefully its not bricked!
Now boot back into download mode
Flash TWRP via Odin again (I'm summarizing greatly now, as you should by now understand this kind of shorthand)
Ok, now boot up into TWRP recovery mode (vol up, home, power)
Navigate through TWRP menus to create a Backup. Click Backup Button, and swipe to create backup. (this is just so that it creates the directory structure on your phone)
Click the Reboot System button, skip all the setup you can again. (DO NOT INSTALL SUPERSU!!! will cause bootloop)
Extract the "JasmineROM_v7.0_N910VVRU2CPF3.7z" file it will create a directory called "JasmineROM_v7.0_N910VVRU2CPF3".
Plug USB into phone and to computer. Copy the JasmineROM_v7.0_N910VVRU2CPF3 folder into \Internal storage\TWRP\BACKUPS\Phone SN\
Reboot into TWRP recovery
Click the Restore button (DONT start the restore yet!!!), and check that your JasmineROM is listed as a recovery option. (don't recover YET) If it's not there you copied it into the wrong directy, try again before proceeding.
Go back to the main menu, Click the Wipe button. Click the 'Advanced Wipe' button, and wipe the following cache/dalvik/system/data
Go back to Restore (from 2 steps ago) and run the JasmineROM_v7.0_N910VVRU2CPF3 recovery, return to main menu afterwards
Go to wipe, and wipe the cache/dalvik only this time.
Reboot into download mode
Flash the N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.m d5.7z file via Odin
Reboot the system, this will take a LONG TIME. WAIT for it. (if reboot takes >10 min, pull battery and restart)
Once it boots up, skip all the setup again. Copy the CM13, Gapps and XPosed (both zip and apk) to your downloads. Don't unzip anything, not necessary.
Now reboot into recovery go to WIPE and do a factory reset by swiping.
Then goto Install (still in recovery) and install CM13, then Install Gapps.
Reboot your phone, this time you are setting up properly reboot will take a while to optimize your apps depending on Gapps version used. So do all your setup as you want your phone setup. Once that's done, restart the phone in recovery. (if reboot takes > 5 min, pull battery and restart)
Install via TWRP the XPossed.zip file.
Reboot your phone, once on. Navigate via My Files, to downloads and install XPosed.apk
CONGRATULATIONS. You now have a fully Unlocked, Rooted Note 4 Verizon with CryanogenMod 13.0 installed and XPosed Installed.
Suggested Apps
Kernel Auditor [ROOT], will allow you to adjust kernel settings. Such as CPU clock speeds and thermal throttling, if your phone is too hot.
Note: About ROOT[/], you will have root once you finish this guide. But it is disabled by default, you can enable root in developer options (no reboot required when changing). Unlock your developer options again, and scroll down you will see an option to enable/disable root. This allows you to keep turn off during normal use, and only enable it when you need to install an app that requires root. You can always just leave it on all the time, that is your choice.
Note: Some apps on Google PlayStore will become unavailable due to incompatibility (according to google, HA). Such as YouTube Music, you will no longer be able to install it through the store. But you can install it by using an APK site, such as APK Downloader. On this site you find the app you want on play.google.com, copy the HTTP link and put it into the APK Downloader and it will generate a direct download link to the APK file. Copy onto your phone and sideload (ie. install) through file explorer. I don't endorse them, they are just one of many places you can get APK files.
Change Log
7/28/2016
Another success story :good:
Added note about how root works in CM 13.0
Corrected Step 34
Minor text adjustments, for clarification
Made note that wifi doesn't work with CDP1 flash
Added note that you MUST HAVE a valid sim card with internet access for step 35! KingRoot requires internet to function, and Wifi will NOT WORK after flashing CPD1 firmware (incomparable drivers).
Added another note about internet at the top of the instructions, to make sure people are aware.
7/27/2016
Added Bicknasty to the Contributors list - helped resolve issues I had with CM 13.0 kernel & modem.
Added a note to downloads section regarding total size of files downloaded and expected time.
Re-wrote steps 40-48 to make it easier to understand. Adding some steps and explaining in more detail.
Added note at the top to read ALL the instructions once before starting
Added note with the estimated time to perform all the steps
Added note suggesting Kernel Auditor app, and made reference to the fact that some apps on playstore will NOT install from playstore. Suggested APK Downloader for apps not available from store
Added a Success Story Section
Added note on how to enable developer options

Any faster source for N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5

jwp1299 said:
Any faster source for N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5
Click to expand...
Click to collapse
Probably, but that's the only one I know which is a free download that I'd trust.

JacekRing said:
Probably, but that's the only one I know which is a free download that I'd trust.
Click to expand...
Click to collapse
Alright, still works just a little long. Thanks so much for the guide, working great so far!

jwp1299 said:
Alright, still works just a little long. Thanks so much for the guide, working great so far!
Click to expand...
Click to collapse
How far are you now?
And let me know when you finish, critique my guide. If parts weren't clear enough let me know.
And finally if you run into any issues let me know.

Great guide (I honestly haven't read it, it's too long but it looks thorough, and I know you were annoyed with the tedious process), glad I was able to help you figure things out!

Bicknasty said:
Great guide (I honestly haven't read it, it's too long but it looks thorough, and I know you were annoyed with the tedious process), glad I was able to help you figure things out!
Click to expand...
Click to collapse
Yea I do appreciate the help Bicknasty. I'll add you to contributors list later as helping with cyanogen issues I was having.

Bicknasty said:
Great guide (I honestly haven't read it, it's too long but it looks thorough, and I know you were annoyed with the tedious process), glad I was able to help you figure things out!
Click to expand...
Click to collapse
You know it wasn't so much that it annoyed me it's that there was no concrete guide telling me what to do. It's a thread here, a post there to do a specific thing but they aren't coordinated in a logical way for users to easily find.

Alright ignore what I said before this edit, I just skipped a step.
I must say though, steps 41-43 are very confusing. What is the ROM folder?

jwp1299 said:
Alright ignore what I said before this edit, I just skipped a step.
I must say though, steps 41-43 are very confusing. What is the ROM folder?
Click to expand...
Click to collapse
The ROM folder I'm referring too is the folder inside the Jasmine zip file. I only reference it so people wouldn't try to take just the files inside the folder which is inside the zip file. Lol yea that's confusing....I'll think about how to rewrite those and make adjustments in a couple hours to make it clearer.
But basically when you extract the Jasmine zip file it creates a folder with files in it. Copy the whole folder not just the files to where it makes your recovery folders.

JacekRing said:
The ROM folder I'm referring too is the folder inside the Jasmine zip file. I only reference it so people wouldn't try to take just the files inside the folder which is inside the zip file. Lol yea that's confusing....I'll think about how to rewrite those and make adjustments in a couple hours to make it clearer.
But basically when you extract the Jasmine zip file it creates a folder with files in it. Copy the whole folder not just the files to where it makes your recovery folders.
Click to expand...
Click to collapse
Okay, awesome. Also I think the TWRP part could be explained a little clearer.
Other than that, 100%
oh also, at the start I would say to read the entire thing before starting, and give a warning that downloads will take like 4 hrs

jwp1299 said:
Okay, awesome. Also I think the TWRP part could be explained a little clearer.
Other than that, 100%
oh also, at the start I would say to read the entire thing before starting, and give a warning that downloads will take like 4 hrs
Click to expand...
Click to collapse
Lol yea, didn't think to mention reading the whole thing first. To me that's a given I always read everything before starting. I'll add a note to read everything.
As to download time, well it is like what 12 gigs in total? Basically 4 full versions of the Android OS at 2 gigs reach plus all the extras.
I'll try to see if I can't explain the twrp recovery of Jasmine better. Only reason you need to do Jasmine is for the 6.0.1 device drivers (such as modem).

jwp1299 said:
Okay, awesome. Also I think the TWRP part could be explained a little clearer.
Other than that, 100%
oh also, at the start I would say to read the entire thing before starting, and give a warning that downloads will take like 4 hrs
Click to expand...
Click to collapse
I've modified the guide appropriately, to resolve all of the issues (I think) you mentioned. And to make some steps easier to understand and follow.
I also added a recommended app on the bottom, and mentioned a site you can use to get PlayStore apps which will now list as incompatible with our phones.
Finally, question: Did you succeed using this Guide? Just curious if everything is working as expected after following my guide. I wrote the thing from memory, after spending 3 days rooting my phone and figuring everything out from various sources. Hopefully this saves people some time where they don't have to piece a dozen sources together to figure out how to do it. I only mentioned the main 4 I referenced, but there were other lessons learned from various places that aren't covered in those posts.

JacekRing said:
I've modified the guide appropriately, to resolve all of the issues (I think) you mentioned. And to make some steps easier to understand and follow.
I also added a recommended app on the bottom, and mentioned a site you can use to get PlayStore apps which will now list as incompatible with our phones.
Finally, question: Did you succeed using this Guide? Just curious if everything is working as expected after following my guide. I wrote the thing from memory, after spending 3 days rooting my phone and figuring everything out from various sources. Hopefully this saves people some time where they don't have to piece a dozen sources together to figure out how to do it. I only mentioned the main 4 I referenced, but there were other lessons learned from various places that aren't covered in those posts.
Click to expand...
Click to collapse
I was quite successful with the root. Even though I messed up a few times (skipping steps), it all works out and now it's working lovely. It only took an hour of actual work, plus a lot of download time because of slow hosts.
Thanks so much for the guide, the only issue was with the slow hosts, and that's hardly your fault. I do wonder if maybe setting up a torrent of the heavier files might help though.
Edit: I will say, this is a wonderfully tedious root effort.

jwp1299 said:
I was quite successful with the root. Even though I messed up a few times (skipping steps), it all works out and now it's working lovely. It only took an hour of actual work, plus a lot of download time because of slow hosts.
Thanks so much for the guide, the only issue was with the slow hosts, and that's hardly your fault. I do wonder if maybe setting up a torrent of the heavier files might help though.
Edit: I will say, this is a wonderfully tedious root effort.
Click to expand...
Click to collapse
An hour..........I spent 2 hours watching kingroot try and root my damb phone, LOL because I didn't wipe before trying to get temporary root the first time you use it (before I read in a post that wiping twice will make it MUCH more successful). Took me 10+ hours of actual work to get my phone rooted and CM 13.0 setup, because I didn't have steps to follow, LMAO. Made it up as I went.
As to the Torrent, I'd be the only one sharing and my upload speeds are not that great. maybe 500 kbps, I live in a rural area. At least my download speed is 40 mbps.
And it is hellofa tedious root for the Note 4, I haven't seen any other phone as crazy tedious to root.
Edit: Mind if I add a 'success story' section and add you to it?

JacekRing said:
An hour..........I spent 2 hours watching kingroot try and root my damb phone, LOL because I didn't wipe before trying to get temporary root the first time you use it (before I read in a post that wiping twice will make it MUCH more successful). Took me 10+ hours of actual work to get my phone rooted and CM 13.0 setup, because I didn't have steps to follow, LMAO. Made it up as I went.
As to the Torrent, I'd be the only one sharing and my upload speeds are not that great. maybe 500 kbps, I live in a rural area. At least my download speed is 40 mbps.
And it is hellofa tedious root for the Note 4, I haven't seen any other phone as crazy tedious to root.
Edit: Mind if I add a 'success story' section and add you to it?
Click to expand...
Click to collapse
Oh of course, go ahead and add me.
Also, if you do end up making a torrent, i'd be happy to help seed at least for a while. I have pretty good upload and no data caps or anything so it would probably help a bit (anything is faster than that 100 kbps that xda was giving)

You called N910VVRU2BPA1_N910VVZW2BPA1_VZW.zip, "N910VVRU2BPA1 Full Firmware". Which kinda got me confused, (maybe its just me trying to do this at 1 am >_>) but might want to edit that. Other then that Iv'e had a pretty easy time following this guide. Thanks! (still doing it fyi, I got an infinite bootloop, so figured I messed up somewhere after reflashing TWRP, now im starting from scratch.)

I have a Very weird problem , I followed your instructions correctly i was on step 25 did exactly what you said pulled the unpluged the USB and pulled the battery and and waited 5 seconds and put the battery back in and rebooted the phone only problem is now it is stuck in a boot loop of the image Samsung galaxy note 4 and just keeps rebooting . I haved tryed doing a factory reset and wiping cache and reinstalling 5.1..1 via odin and it is still doing the boot loop i am not sure what i did wrong or what to do . I know its not hard brick because i can get into recovery and download but just wont boot the past the Samsung not 4 logo
---------- Post added at 05:05 AM ---------- Previous post was at 04:57 AM ----------
Ok so i went and wiped and factory rest like 10 times and now it got past the screen So that is a relief lol

Viper-Link said:
You called N910VVRU2BPA1_N910VVZW2BPA1_VZW.zip, "N910VVRU2BPA1 Full Firmware". Which kinda got me confused, (maybe its just me trying to do this at 1 am >_>) but might want to edit that. Other then that Iv'e had a pretty easy time following this guide. Thanks! (still doing it fyi, I got an infinite bootloop, so figured I messed up somewhere after reflashing TWRP, now im starting from scratch.)
Click to expand...
Click to collapse
Not sure what to tell you viper as not enough info. Hope you figured it out...

pfcland said:
I have a Very weird problem , I followed your instructions correctly i was on step 25 did exactly what you said pulled the unpluged the USB and pulled the battery and and waited 5 seconds and put the battery back in and rebooted the phone only problem is now it is stuck in a boot loop of the image Samsung galaxy note 4 and just keeps rebooting . I haved tryed doing a factory reset and wiping cache and reinstalling 5.1..1 via odin and it is still doing the boot loop i am not sure what i did wrong or what to do . I know its not hard brick because i can get into recovery and download but just wont boot the past the Samsung not 4 logo
---------- Post added at 05:05 AM ---------- Previous post was at 04:57 AM ----------
Ok so i went and wiped and factory rest like 10 times and now it got past the screen So that is a relief lol
Click to expand...
Click to collapse
Was this after the first time you inputted the adb commands our second? Make sure you pull the SD card after the second time, as it will cause reboots after the second time until you reformat the SD card on your PC. Size will be wrong on PC but size will fix when you reformat the SD card a second time on your phone.
Edit it creates like 20 partitions on the ad card when you do adb, it creates a backup of your phone os.

Unknown Axon 7

Bought an Axon 7 from China 1.5 years ago. Very satisfied with it, but only got 2 OTA. Last one a couple of months ago. I tried in vain to identify the type. It is marked A2017 on backside. Buildnumber is ZTE_A2017CTJMV1.0.0B04. Is it possible to upgrade manually to Nougat?

Nisse1234 said:
Bought an Axon 7 from China 1.5 years ago. Very satisfied with it, but only got 2 OTA. Last one a couple of months ago. I tried in vain to identify the type. It is marked A2017 on backside. Buildnumber is ZTE_A2017CTJMV1.0.0B04. Is it possible to upgrade manually to Nougat?
Click to expand...
Click to collapse
That is really weird. But of course it is possible
Look, there are three ways to do this. You have the official method, which involves downloading the OTA yourself from the support page, unzipping it, putting it on the internal storage or SD and going to Updates to apply it. This one might fail. Then there's the TWRP way, but you need to unlock the bootloader. And then there's the MiFlash way, where you don't need unlocked bootloader and it will not fail, but it's a little bit of an extreme...
For now, do this:
http://devicedownload.zte.com.cn/support/product/201606031040/sd/20171009174830988.zip
Download that file and unzip it. There will be a file called "update.zip" and maybe a pdf inside. Take the update.zip and put it in the root of the internal storage. Then go to settings -> Updates, and it should detect it. Install it

Thank You
Thanks,
Downloaded and extracted the update.zip file. Put in the root of SD. Tried the system update. Got answer "Software is up to date" But nothing happens.

Nisse1234 said:
Thanks,
Downloaded and extracted the update.zip file. Put in the root of SD. Tried the system update. Got answer "Software is up to date" But nothing happens.
Click to expand...
Click to collapse
Try putting on the internal storage (not the SD card). If it still does not appear, then try updating through the stock recovery. That should work.
EDIT: just to be clear, you did not extract the contents of the update.zip, did you? You need to put the actual update.zip on the internal storage (you can try on the external sd card). As mentioned by choose an username, check the update.zip you downloaded. It it contains another update.zip, that is the file you need. You may have already done this, but I have seen others still get it wrong...
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.

joaste said:
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
Click to expand...
Click to collapse
That's the point. I wanted to see if the normal update could go normally or not. Next step is MiFlash
At least we know it's an A2017...

Choose an username... said:
That's the point. I wanted to see if the normal update could go normally or not. Next step is MiFlash
At least we know it's an A2017...
Click to expand...
Click to collapse
You can still try first through stock recovery.

Right...
joaste said:
Try putting on the internal storage (not the SD card). If it still does not appear, then try updating through the stock recovery. That should work.
EDIT: just to be clear, you did not extract the contents of the update.zip, did you? You need to put the actual update.zip on the internal storage (you can try on the external sd card). As mentioned by choose an username, check the update.zip you downloaded. It it contains another update.zip, that is the file you need. You may have already done this, but I have seen others still get it wrong...
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
Click to expand...
Click to collapse
The file "update.zip" contains 29 sub files, none of them was named update.zip.
No I did not unzip it.
This time I put the "update.zip" in the root of the phone folder. But nothing happened when I run the Settings»update.
How do I post screen shots in this forum?

Nisse1234 said:
The file "update.zip" contains 29 sub files, none of them was named update.zip.
No I did not unzip it.
This time I put the "update.zip" in the root of the phone folder. But nothing happened when I run the Settings»update.
How do I post screen shots in this forum?
Click to expand...
Click to collapse
Okay. Put it in the SD card. Then turn the phone off.
After it is completely off, hold Volume Up + power until the zte screen appears. You should get into the stock recovery.
Now, the stock recovery will most probably be in chinese, but you have to use an option that says 'sd' between a bunch of chinese stuff. It's easy to spot. Scroll to that option with the volume keys and select it with Power. The contents of the SD card will appear. Select the update.zip and see if it works or not.

Well...
Choose an username... said:
Okay. Put it in the SD card. Then turn the phone off.
After it is completely off, hold Volume Up + power until the zte screen appears. You should get into the stock recovery.
Now, the stock recovery will most probably be in chinese, but you have to use an option that says 'sd' between a bunch of chinese stuff. It's easy to spot. Scroll to that option with the volume keys and select it with Power. The contents of the SD card will appear. Select the update.zip and see if it works or not.
Click to expand...
Click to collapse
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?

Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
Nothing. If you use MiFlash they will get erased, but not this way.
Think about it this way; doing this from the Updates section actually issues a command that gets you into the recovery to flash the file. So basically you skip the Updates part.
Please tell me if the recovery is in chinese later

Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
Also a small FYI:
-Contacts are backed up on your Google account, and even if you don't have one you can export all of your contacts to a .vcf file, then back it up, and then import it once you finish
-Apps... Just download them again. You can backup the 'Android' folder that's on your internal storage, most games save their data there.
-Bank ID? Isn't that just a log in?

I format my zte axon 7 A2017G and now am stock on WiFi(when ever I tap next it will load then return to WiFi) and it seems the phone is locked by zte please how do I unlock it

Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
no,but you'd better make a backup .in order to prevent accidents

[GUIDE/TUTORIAL/HOWTO] HTC One M7 Stock to Android 11 / LineageOS 18.1

[GUIDE/TUTORIAL/HOWTO] HTC One M7 Stock to Android 11 / LineageOS 18.1
[GUIDE/TUTORIAL/HOWTO] HTC One M7 any version (m7, m7ul, m7spr, m7vzw) stock to Android 11 R / LineageOS 18.1
This detailed step-by-step guide helps you transform your HTC One M7 (any version) to a powerful one with Android 11.
Make sure you have the One M7 model, in Android, go to Settings > About phone and check the model.
CHANGELOG
v8. Upgrade to Android 11, improve readability, update pack
v7. Updated pack with MagiskManager 8.0.7 and Magisk 21.4
v6. Infos in case of Simlock
v5. Moved to Android 10 thanks to @tarkzim, updated pack with Magisk 20.4
v4. Moving to Android 9. I was wrong in v3 ;- Thx @tarkzim), good for all M7 versions
v3. Reverted back to Android 7.1. No stable ROM for Android 8 or 9 (and will never be)
v2. Tutorial updated for Android 8.1 Oreo, updated pack with TWRP 3.3.1-0
v1. Initial release
1) DOWNLOAD
- djibe HTC One M7 pack (44.3 Mo) v2 : http://bit.ly/djibe-onem7-v1
(includes HTC drivers, recovery TWRP 3.6.1_9-0 for all m7 by Xeno1, Magisk Root 23 adb & fastboot.exe).
Unzip the djibe folder from the zip on root folder of C: drive.
- ROM Unofficial Lineage OS 18.1 for M7: https://forum.xda-developers.com/t/rom-11-0-unofficial-m7-all-lineageos-18-1-stable.4454219/
Download latest build for M7 here: https://androidfilehost.com/?w=files&flid=334598&sort_by=date&sort_dir=DESC
+ BitGApps ARM 11 v1.4+: https://github.com/BiTGApps/BiTGApps-Release/releases/
+ Charge phone to 100 %
WARNING. This tutorial uses Microsoft Windows.
WARNING. Warranty is now void.
WARNING. Read carefully the sentences starting with ###.
2) BACKUP DATA AND INSTALL DRIVERS
Disable Antivirus.
Install drivers from my pack:
right click on HTCDriver.exe -> click on Run as administrator and continue the setup.
Then install HTC_BMP_USB_Driver_x64.msi (or *_x86 if you have a 32bits Windows edition).
### Install doesn't work ? Try these drivers for Win10 : https://htcusbdriver.com/download/htc-usb-driver-v4-02-0-001
Now go to my folder flash, and right click the adb 15seconds installer > Run as administrator.
During install, every time the command asks you a confirmation, enter Y and confirm with Enter.
Connect HTC One (while phone on) to PC, let drivers install.
In Windows explorer, HTC One should be available.
### If not make sure phone connection is in File transfer mode (see Android notifications).
Collect all personal photos, videos, etc ... and copy these on PC.
Use an app like Backupyourmobile to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Disconnect phone.
### If your phone is Simlocked/carrier locked/Network locked, don't go further.
Visit official website of your network carrier (or call their support) to retrieve your desimlock code.
Ask them for details on how to remove simlock.
How do I know my phone is simlocked ? When you insert a SIM card from another operator, network is not accessible.
Only a stock ROM can remove simlock.
To go back from custom ROM to stock in 1 zipfile flash, follow this tutorial: https://tcg96.github.io/m7gurureset
3) UNLOCK BOOTLOADER
In Android, go to Settings > About > Software information > More.
Tap 7 times on Build number. It unlocks Developer options.
Go back to the About menu, you can see the new Developer options menu.
Tap on it, accept the warning.
Toggle on the USB debugging option.
Connect phone, a message appears on phone : Allow USB debugging?
check Always allow and confirm by tapping on OK.
Now, open a Windows command on my "flash" folder (hold Shift + right click on folder -> Open a windows command here).
### Then navigate to my flash folder (if it is on desktop) with this command :
Code:
cd /d C:\djibe\flash
Enter command :
Code:
adb devices
, confirm by pressing Enter.
Command returns :
Code:
List of devices attached
HT35****** device
### If no device is found, uninstall and reinstall properly the drivers while antivirus is off.
### Or start fresh on another PC.
Now type :
Code:
adb reboot bootloader
Authorize ADB commands on phone.
Phone restarts in Fastboot mode. Wait till phone screen is blank in fastboot mode.
Type :
Code:
fastboot devices
Command returns :
Code:
HT35**** fastboot
Type :
Code:
fastboot oem get_identifier_token
, confirm by pressing Enter.
Command returns multiple lines.
Select with your mouse all the lines from
Code:
<<<< Identifier Token Start >>>>
(included)
to the line
Code:
<<<<< Identifier token end >>>>>
(included).
Now on keyboard copy (Ctrl + C combo), then open Notepad.
In Notepad, paste those lines (Ctrl + V combo).
Now manually remove all the (bootloader) strings from each line.
Your notepad should now look like this :
<<<< Identifier Token Start >>>>
37A5DBF4FE5F0D9F4425E54AA91AFDBF
2A20E9C67C3BB4FAE60263F76BDEC6AC
847BF9FFB11DAEA4AB88AC8710435449
9BC12E93DF4C54FFE3D064C4C810C49A
2CDAF2E0CD3A164FED4A568CB0FD2AC6
C01AA991733D949C00987062D691DE91
8AA1C97CEBC3ACE83FECE75A1D03CE72
62414C7DC36A73AFCBF433E1EBE2EDC7
E272F73309632D3EF8C86E472B65E8EF
37E46B52FE3F94FC69D1854CA3DE6F48
C3E10001B233A70B1EAF35134F51FCC6
353E0CC98534E6E60A241A7063D0BE2F
A5B752E75C1C47E6F739BDBE67D024DA
3292A14278247557632639802722A86C
E61424F7666AE085AA9905096FEED1AD
5ECBBD867544E95ABDDA277690B8CB55
<<<<< Identifier Token End >>>>>
Now visit this website : https://www.htcdev.com/bootloader/
Register on the site. Confirm registration with your email.
In the select menu, chose HTC One (M7), click Begin unlock Bootloader button.
Agree to legal terms.
Next page, go to the bottom and click continue to step 5.
In the bottom of this page, in the lower textarea "My Device Identifier Token",
copy and paste the multiple lines you just edited (my example is just above).
Click Submit.
HTC tells you : Token Submitted Successfully.
Open your mailbox (associated to your HTC account).
Copy the Unlock_code.bin file attached to email in my "flash" folder you unzipped.
In Windows command, type :
Code:
fastboot flash unlocktoken Unlock_code.bin
, confirm with Enter.
Command should return :
Code:
unlock token check successfully
Back to phone, press Volume+ to select "Yes, unlock bootloader", then Power button to confirm flash.
Now wait while phone is going to Factory reset.
Don't let Android restart by holding both Power + Volume- to enter bootloader immediately.
FASTBOOT menu is overlined in red.
4) FLASH TWRP RECOVERY
Using the same Windows command prompt, enter :
Code:
fastboot devices
to make sure phone is still available.
Then
Code:
fastboot flash recovery twrp-3.6.1_9-0-m7univ.img
Command returns :
Code:
finished. total time: x.xxxxs
##€ If it fails, tries with a Windows Powershell shell.
Now on phone, press Volume- to select Bootloader, confirm with Power button.
You are back to the booloader screen (UNLOCKED is written on top line), press Volume- to navigate to RECOVERY, and confirm with Power button.
Phone reboots in TWRP recovery.
5) WIPE PARTITIONS
In TWRP, check Never show this screen and Swipe to Allow Modifications.
You land on TWRP Home screen.
Go to Wipe > Advanced wipe.
Select Dalvik, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to Wipe menu.
6) FLASH ROM, GAPPS AND ROOT (OPTIONNAL)
We first have to get our zips on the phone.
Still on TWRP Home screen, tap on Mount > deselect all partitions except Data, then connect phone to PC.
In Windows Explorer, you can see MTP Device, copy the zips of ROM, GApps, Magisk + Magisk Manager right in the Internal Storage folder.
Tap on Disable MTP once copy is finished.
Then back to Home screen, tap on Install > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active)
then Add more Zips -> Magisk*.zip,
then Add more Zips -> bitgapps*.zip,
then Swipe to confirm Flash.
Wait for operation to end (can be long).
When completed successfully, tap on Reboot.
Tap on Do not install when TWRP asks for the app install.
Wait during long first boot.
Setup Android.
7) You can use Backupyourmobile to restore data,
use GPS Status & Toolbox app to enhance GPS fix.
That's it.
Enjoy,
djibe
THANKS --------------
Teams of : TWRP, LineageOS team, tarkzim, zsoerenm, alray, ., Flyhalf205, icxj1, R1ghtC, gimmeitorilltell, All M7/MSM8960 contributors.

Just my 2 cents
Just my 2 cents if it can help
djibe89 said:
- a microSD card (FAT32 format). Copy the zips of ROM, GApps, addonsu and deviceid*.apk (both in my pack) on the root folder of microSD, then insert it in phone.
Click to expand...
Click to collapse
The M7 is not equipped with a mircoSD card slot, only a virtual /sdcard (symlink to /data/media/0) ... So they'll either have to adb sideload or adb push the files to internal memory which is pointless at this stage since it will be wiped during bootloader unlock. Or drag n drop the files using mtp from twrp once it's installed on the phone.
3 ) UNLOCK BOOTLOADER
[...]
Now wait while phone is going to Factory reset.
Setup Android again on next boot.
4 ) FLASH RECOVERY
Now re-enable USB debugging in Android.
Using the same Windows command prompt, type
Code:
adb reboot bootloader
again.
Click to expand...
Click to collapse
You could save a lot of time just force rebooting to bootloader (power + vol down) right after BL unlock/factory reset are completed so you don't have to setup the system you're going to wipe 2 steps later. USB debug anyway isn't required to fastboot flash recovery so it's not like booting back in system is mandatory before flashing recovery.
:good:

@alray : Thank you so much for help.
I'm lazy with baby waking up every night and did some awful copy-paste.
I correct all these right now.
Thanks.

I would highly recommend to use the official downloads of twrp, HTC drivers, roms and so on, you uploaded these files to your google drive and there is stuff in it nobody will ever need. And nobody knows if those files are in original condition. Strange thats the third time this year someone tries to get users to use their stuff (for a five years old device) there are already a lot of guides out there and several thousand people did it several thousand times without problems. Also you wrote that this would be official lineage but its unofficial, and for that there is already a thread here. The other two threads got deleted by mods because they tried to get users to use files from unknown suspects sources. Use android file host and maybe tell in los thread where those files are stored, whats the source and who made it.

saturday_night said:
I would highly recommend to use the official downloads of twrp, HTC drivers, roms and so on, you uploaded these files to your google drive and there is stuff in it nobody will ever need. And nobody knows if those files are in original condition. Strange thats the third time this year someone tries to get users to use their stuff (for a five years old device) there are already a lot of guides out there and several thousand people did it several thousand times without problems. Also you wrote that this would be official lineage but its unofficial, and for that there is already a thread here. The other two threads got deleted by mods because they tried to get users to use files from unknown suspects sources. Use android file host and maybe tell in los thread where those files are stored, whats the source and who made it.
Click to expand...
Click to collapse
Because you are a senior member you know where to download everything.
But everyone is not like you.
So I tried to compile a ready-to-go pack for the newcomers, like I did for many devices by know.
This allows noobs to profit from custom ROMs and don't keep it esoteric.
Like you say, many downloads are just hacks, so I tried to bundle lowest size safe files.

saturday_night said:
I would highly recommend to use the official downloads of twrp, HTC drivers, roms and so on, you uploaded these files to your google drive and there is stuff in it nobody will ever need. And nobody knows if those files are in original condition. Strange thats the third time this year someone tries to get users to use their stuff (for a five years old device) there are already a lot of guides out there and several thousand people did it several thousand times without problems. Also you wrote that this would be official lineage but its unofficial, and for that there is already a thread here. The other two threads got deleted by mods because they tried to get users to use files from unknown suspects sources. Use android file host and maybe tell in los thread where those files are stored, whats the source and who made it.
Click to expand...
Click to collapse
For the official LOS ROM, tell LOS to store official builds. As they don't do it anymore, we must rely on personnal builds.
A lot of guides out there ? Made extensive search for cracking this phone, never found a step by step one.
Five year old device ? Still so good once unleashed. Custom ROMs are for these devices isn't it ?

@djibe89 Might be useful to point out in your opening post that the 20180420 build has DT2W enabled, but I'd like feedback from people with a functional battery if it makes their device reboot or not, similar to issues reported in the original kernel thread. I suspect my battery is on its way out. The 20180416 build is completely stock upstream LineageOS, no DT2W.
Thanks for the credit .

.:B:. said:
@djibe89 Might be useful to point out in your opening post that the 20180420 build has DT2W enabled, but I'd like feedback from people with a functional battery if it makes their device reboot or not, similar to issues reported in the original kernel thread. I suspect my battery is on its way out. The 20180416 build is completely stock upstream LineageOS, no DT2W.
Thanks for the credit .
Click to expand...
Click to collapse
Thanks for your explanations.

Any trouble following this tutorial guys ? How to enhence it ?

802D device supported?

M.Z.F said:
802D device supported?
Click to expand...
Click to collapse
Hi, no idea, does your model has another model name/code ?

djibe89 said:
Hi, no idea, does your model has another model name/code ?
Click to expand...
Click to collapse
Model name & code like?
PRI Version= 4.22_001
PRL Version = 10012

Getting this message: Updater process ended with ERROR: 7 Error installing zip file '/sdcard/lineage-14.1-20180520-UNOFFICIAL-m7.zip'
any help would be appreciated, thank you

I have tried all the custom roms mentioned above i.e. lineage os , Xenonhd and slim7. But non of them installed. It always shows error either this is not for your device , this device is cdwg or unable to mount. Please give me a link for custom rom for my device that is htc one 802d cdwg

Rafay106 said:
I have tried all the custom roms mentioned above i.e. lineage os , Xenonhd and slim7. But non of them installed. It always shows error either this is not for your device , this device is cdwg or unable to mount. Please give me a link for custom rom for my device that is htc one 802d cdwg
Click to expand...
Click to collapse
All the custom roms mentioned above are NOT for your phone variant.There were almost no development for the 802 branch at the peak of it's popularity and I didn't see anything new for this variant in the past 2 years or so. I wouldn't expect a 7.1 roms for this variant...
Maybe you'll have better luck searching on Asian forums

skovatov said:
Getting this message: Updater process ended with ERROR: 7 Error installing zip file '/sdcard/lineage-14.1-20180520-UNOFFICIAL-m7.zip'
any help would be appreciated, thank you
Click to expand...
Click to collapse
Here you have answer:
https://forum.xda-developers.com/showthread.php?t=2522762
---------- Post added at 05:30 PM ---------- Previous post was at 05:20 PM ----------
Hi.
After installing Android 7.1 Google Pay stop working on my phone. I have torn on NFC communication but terminal don't read my card from app. I don't turn on access to root. Any aidia how to solve this issue?

I have an M7 that I would like to update Android on however the above is a bit over my head. I have seen other sites and video showing this to only take a few minutes and not requiring a PC. Am I missing something? I just don't quite understand the process of it all.

Bazooka said:
I have an M7 that I would like to update Android on however the above is a bit over my head. I have seen other sites and video showing this to only take a few minutes and not requiring a PC. Am I missing something? I just don't quite understand the process of it all.
Click to expand...
Click to collapse
Flashing without a PC can be done but not recommended. If something goes wrong (and thrust me, it happens pretty often) you'll be stuck with a bootlooping phone.
The guide at post #1 is all you need, what part exactly do you have problem understanding?

alray said:
Flashing without a PC can be done but not recommended. If something goes wrong (and thrust me, it happens pretty often) you'll be stuck with a bootlooping phone.
The guide at post #1 is all you need, what part exactly do you have problem understanding?
Click to expand...
Click to collapse
Thanks for that. I tried to go through it nice and slow making sure I understood each step. I got to where I needed to open a command window on the "flash" folder to which I must have powershell(?) installed as it gave me that option. After inputting 'adb devices' it listed a device but stated it was offline. This is where I am stuck as the steps after this do not work.

drivers win10
Hi, I have a basic ask. Do you know where to get Win 10 drivers? I can't run the installer HTCDriver_4.2.0.001 on my Windows 10 (version 1803).
It gives me the error: The driver installer is not supported for your operating system. Thanks for your help.

[GUIDE] Android 11 GSI With GApps and Root (magisk)

DON'T DO THIS ON A RAZER PHONE 1 OR IT WILL BE OMEGA BRICKED! ONLY DO THIS ON A RAZER PHONE 2!
This was just an experiment to see if i could cobble together some GSI install guides (that on their own are kinda confusing) to make something moderately more cohesive and understandable. Here's my moderately usable guide!
-----------------------------------------------------------------
VIDEO!
-----------------------------------------------------------------
-----------------------------------------------------------------
Things that work and don't work:
-----------------------------------------------------------------
This section will update periodically as issues arise or fixes arise for said issues.
Note: Things that work: Bluetooth*, all sensors, audio, LTE/SIM/phone stuff, 120hz (you need to go into the settings > Phh treble settings > Misc features > Force FPS > [email protected])
Things that probably work: N/A
Things that don't work for some reason: SafteyNet with Magisk. All modules that I've used work tho...??! Verizon.
Remember, you can always flash back to stock if something doesn't work properly.
-----------------------------------------------------------------
FIXES!!!
-----------------------------------------------------------------
AUDIO FIX!!! GO TO Phh Treble Settings > Qualcomm features > Use alternate audio policy.
Bluetooth audio stops working with this enabled. Disable it for Bluetooth audio. The audio fix doesn't apply to Bluetooth audio ether way.
BLUETOOTH FIX!!! Download a root file browser from the google play store and allow it to have root access. Delete BluetoothCommonRes.apk which is found in the overlay folder which is found in the vendor folder. After you delete BluetoothCommonRes.apk, rename the RazerAuraBluetoothRes.apk to BluetoothCommonRes.apk.
-----------------------------------------------------------------
Important notes
-----------------------------------------------------------------
THIS IS ASSUMING YOU HAVE ALREADY UNLOCKED THE BOOTLOADER OF YOUR DEVICE AND HAVE GOTTEN A SERIAL NUMBER OUTPUT FROM CMD AFTER TYPING IN "fastboot devices" AND MAKE SURE YOU HAVE TYPED IN "fastboot flashing unlock" AND "fastboot flashing unlock-critical".
***NOTE: I AM NOT RESPONSIBLE FOR ANY HARD BRICKED DEVICES OR ANGRY PARENTS. PLEASE DO NOT COME BACK AT ME SAYING I AM STUPID AND BRICKED YOUR PHONE. YOU DECIDED TO DO THIS. PLEASE PROCEED WITH CAUTION AND DON'T SKIM***
ANOTHER IMPORTANT NOTE: The stock firmware is actually really good for unbricking devices. Razer made it easy to fix your bricked device. So basically, if you can get in to fastboot mode, (which you basically always can do) you can unbrick your device super easily.
AGAIN JUST PLEASE, MAKE SURE TO FOLLOW ALL THESE INSTRUCTIONS CAREFULLY AND DONT SKIM OR ELSE YOU MIGHT BREAK SOMETHING!!!
-----------------------------------------------------------------
Introduction
-----------------------------------------------------------------
This is a quick and easy guide for how to install Android 11 on the Razer Phone 2. I'm kind of a noob here myself but I did this and it worked flawlessly. (also if you do run into any issues PLEASE don't count on me for troubleshooting tips (I'm not that great at that))
-----------------------------------------------------------------
Pre-requisites/Downloads
-----------------------------------------------------------------
Get the factory firmware for your phone. It's a good failsafe in case of a bootloop or a bad case of the phone not booting up. Download it here: P-SMR6-RC001-RZR-201022 (latest build at the time of writing)
Extract this with 7zip or WinRar (or windows. You will need 7zip or WinRar for the rest of this)
First you need the actual GSI. Get the latest version. (Make sure its not a pre-release). system-roar-arm64-ab-vndklite-gapps.img.xz is the version that you should get. The vndklite release will allow you to modify the system partition making it possible to get magisk. Note: If you want magisk, MAKE SURE TO COMPLETELY follow the magisk section of this guide aswell or else magisk will NOT install correctly and will NOT work.
This version also has GApps. It will give you Gmail, the google play store, google play services, etc.
Use 7zip or WinRar to extract this.
Your also gonna need the Trinity Kernel (v2). This gives you TWRP and I'm pretty sure you also need this to have the ability to boot up the phone (I may be wrong but it's required.)
use 7zip or WinRar to extract this.
You will also need this zip file made by arter97 I don't really know what it does but you need it. here is the download: Download.
Don't extract this.
Put all these in a known folder that you can access later.
Alright. Now that we're done with the downloads, time to test to make sure your ready to put this on your phone.
-----------------------------------------------------------------
Making sure your computer is ready
-----------------------------------------------------------------
First things first. Go open your platform tools folder, shift-right click and open a PowerShell, or command prompt window there. Shut down your Razer phone 2 and turn it back on with the power and volume down buttons.
Plug it into your PC and type in
Code:
fastboot devices
you should end up with the serial number of the device. if you don't, follow Razer's instructions on how to install USB drivers and then come back here. Link to PDF.
If you get a serial number, close that and flash stock firmware by going into the aura-p-release-etc. folder, then opening flash_all.bat.
When it finishes and the screen goes black, hold the power and volume down buttons again to get back in to fastboot mode.
open back up the CMD/PowerShell platform tools window thing again.
-----------------------------------------------------------------
Installing/Flashing
-----------------------------------------------------------------
In your CMD or PowerShell window, (while in fastboot mode on the phone) type
Code:
fastboot flash system <file name>
in the <file name> area, just drag and drop the system-roar-arm64-etc.img file into your command line. your command will look a little something like this:
Code:
fastboot flash system C:\Users\user\Desktop\system-roar-arm64-ab-gapps.img
Wait until it says complete or something similar like done or something and has no errors.
Then, time to flash the kernel. it should just be called boot.img.
We will be typing in:
Code:
fastboot flash boot <file name>
Do the same thing that you did for the last command which is drag and drop the boot.img file for the file name.
Again, wait until it says done or complete and has no errors.
After that is done, use the volume buttons to select reboot bootloader with your power button on your phone.
Go to recovery mode and swipe where it says to swipe.
Go to the wipe menu and then tap on format data. Type yes and then press enter/ok.
Go back to your computer and open file explorer.
Put the last zip file that I was talking about earlier (the f2fs thing) on the razer phone 2's internal storage. Head back to your phone, and press install.
Scroll down until you find the zip file and press it and install it. (ignore the errors that may or may not be there) After that, go back to the TWRP home screen (with the 8 options)
Go to the reboot menu, then reboot into recovery
Tap on format data and type in "yes" and tap ok. click on "don't install" because you don't need the TWRP app on your phone.
The phone will shut down. Turn it on normally and everything will work!
----------------------------------------------------------------------------------------------------------------------------------
GET THESE THINGS IF YOU WANT 120Hz, GCam, and a SNAZZY RAZER LOGO.
----------------------------------------------------------------------------------------------------------------------------------
To get 120Hz, you need to go into the settings > Phh treble settings > Misc features > Force FPS > [email protected].
If you want your Razer logo to light up again, use Logo+. here is a download: Logo+ APK
The default camera app sucks. Make sure to get GCam 7.4 from Cyanogen Mods (v8.0 is broken). you can get it here.
Download a root file browser from the google play store and allow it to have root access. Delete BluetoothCommonRes.apk which is found in the overlay folder which is found in the vendor folder. After you delete BluetoothCommonRes.apk, rename the RazerAuraBluetoothRes.apk to BluetoothCommonRes.apk.
-----------------------------------------------------------------
Magisk
-----------------------------------------------------------------
So this part was pretty long-awaited. It half-passes SafteyNet and modules work! (at least all the modules that I've used.)
Make sure you have the vndklite variant. That is the only way that this will work.
1. Open up an adb/fastboot powershell/cmd/windows terminal window.
2. Type adb root and hit enter.
3. Type adb shell and hit enter.
4. Type mount -o remount,rw / and hit enter.
5. Type mv /bin/resetprop_phh /bin/phh-resetprop and hit enter.
6. Type phh-securize.sh and hit enter.
The phone should reboot after you approve the request (if there is one) and you are now able to install magisk!
MAKE SURE THAT THE SUPERUSER APP IS NOT THERE AFTER RUNNING phh-securize.sh.
Get specifically this version of Magisk. Download the zip file.
Boot into TWRP and tap on mount, and select everything (usb storage doesn't matter in this case. it never mounts either way.)
Transfer over your zip file via file explorer, and go back to your phone.
Tap install, then scroll down until you find the zip file and tap it. Swipe to flash and wait. After it is done, you can reboot!
You should see Magisk manager in your app drawer. Open that. It might ask you to install it, if so, install it. Allow apps from this source then install. Open it up. You should see that Magisk is installed. Update it and turn on Magisk hide.
If it passes SafteyNet, it's a miracle.
-----------------------------------------------------------------
In case of failure
-----------------------------------------------------------------
If it starts bootlooping or is perpetually stuck at the razer logo, powered by android screen, go back into fastboot mode and run the flash_all.bat stock firmware thing. it will unbrick your phone automatically. Really make sure you don't skim if you try it again. If it did work (which it probably did), then have a good time with android 11!

There is one bug that has stopped me from going GSI. On every one I've tried, there is a game music bug that is common in many of the games I own. If the volume is set to below 50%, the music will cut in and out constantly. It resolves itself if you keep media volume above 50%. It may not be a deal breaker for everyone, but it was for me, as I use my RP2 heavily for games. Other than that, GSIs work beautifully. Thanks for the comprehensive guide!

Reznor7 said:
There is one bug that has stopped me from going GSI. On every one I've tried, there is a game music bug that is common in many of the games I own. If the volume is set to below 50%, the music will cut in and out constantly. It resolves itself if you keep media volume above 50%. It may not be a deal breaker for everyone, but it was for me, as I use my RP2 heavily for games. Other than that, GSIs work beautifully. Thanks for the comprehensive guide!
Click to expand...
Click to collapse
Just curious, what games have that issue?

Marcos8760 said:
Just curious, what games have that issue?
Click to expand...
Click to collapse
All of The Room games, Battle Chasers: Night War, and most premium games that I've bought. For some reason, Monster Hunter Stories doesn't. It seems like mostly games that have more complex audio/music.

Reznor7 said:
All of The Room games, Battle Chasers: Night War, and most premium games that I've bought. For some reason, Monster Hunter Stories doesn't. It seems like mostly games that have more complex audio/music.
Click to expand...
Click to collapse
Thanks for the info. I added that to the top of the thread.
EDIT: Fix at the top of the thread

Ultimately at the end of the day I could not get Dolby Atmos and the RGB lighting on the back of the phone to work on GSI 10. Hopefully someone will come up with a work around for those 2 items in GSI 11.
RJR

rrusek said:
Ultimately at the end of the day I could not get Dolby Atmos and the RGB lighting on the back of the phone to work on GSI 10. Hopefully someone will come up with a work around for those 2 items in GSI 11.
RJR
Click to expand...
Click to collapse
I got the Razer logo working flawlessly with logo+. I didn't really see the appeal for Dolby Atmos as all it did was made it louder and made the audio clip more.

I did have success getting Atmos to work with this module: https://github.com/reiryuki/Dolby-Atmos-Razer-Phone-2-Magisk-Module

Reznor7 said:
I did have success getting Atmos to work with this module: https://github.com/reiryuki/Dolby-Atmos-Razer-Phone-2-Magisk-Module
Click to expand...
Click to collapse
How can I get magisk on the phone though? it has Superuser pre-installed but it doesn't have support for modules and stuff (as far as I can tell). I really would like some info on how to install magisk if possible.

Marcos8760 said:
How can I get magisk on the phone though? it has Superuser pre-installed but it doesn't have support for modules and stuff (as far as I can tell). I really would like some info on how to install magisk if possible.
Click to expand...
Click to collapse
Actually, I may be misremembering. That may have been on a 10 GSI. I don't think I ever did get Magisk to work on an 11.

Reznor7 said:
Actually, I may be misremembering. That may have been on a 10 GSI. I don't think I ever did get Magisk to work on an 11.
Click to expand...
Click to collapse
Alright good to know. like the other info I've gathered, ill put that at the top of the thread until further notice.

The unofficial LOS GSI just got updated with supposed Magisk support. I'm going to give it a try in a few.

Reznor7 said:
The unofficial LOS GSI just got updated with supposed Magisk support. I'm going to give it a try in a few.
Click to expand...
Click to collapse
Nope, Magisk doesn't work.

Thank you. I got it all set up and mostly working well. I was wondering if you could try Minecraft and let me know if it will let you get to the actual login screen.

I cannot get flashing the Android 11 GSI to work.
I downloaded the latest factory image (MR6) and proceeded to install it. To do that, I had to copy the "fastboot.exe" from the SDK platform tools download to the "aura-p-release..." folder with the factory image.
I open a CMD line and type in "fastboot devices" which get me a string of numbers. Then I type in "fastboot flash system system-roar-arm64-ab-gapps.img.xz" which tries to install it but concludes with an error message, being 'Error: Last flash failed : Bad Buffer Size'.
I tried using different computers and cables, but I end up with the same thing. I'm able to flash the factory image just fine, but can't flash Android 11.

AgentXGhost said:
I cannot get flashing the Android 11 GSI to work.
I downloaded the latest factory image (MR6) and proceeded to install it. To do that, I had to copy the "fastboot.exe" from the SDK platform tools download to the "aura-p-release..." folder with the factory image.
I open a CMD line and type in "fastboot devices" which get me a string of numbers. Then I type in "fastboot flash system system-roar-arm64-ab-gapps.img.xz" which tries to install it but concludes with an error message, being 'Error: Last flash failed : Bad Buffer Size'.
I tried using different computers and cables, but I end up with the same thing. I'm able to flash the factory image just fine, but can't flash Android 11.
Click to expand...
Click to collapse
You forgot to extract it with winrar or 7zip. make sure it is a .img file and not a .xz file.

Wow. I spent close to 7 hours trying and trying again. But that's what I get when I don't read all the instructions. -____-
Thanks very much. It works perfectly.

AgentXGhost said:
Wow. I spent close to 7 hours trying and trying again. But that's what I get when I don't read all the instructions. -____-
Click to expand...
Click to collapse
oh noes!

When in TWRP, the system is not mounted, and I cannot see it on my PC nor in TWRP itself. Any ideas what I did wrong?

Gurcharan5 said:
When in TWRP, the system is not mounted, and I cannot see it on my PC nor in TWRP itself. Any ideas what I did wrong?
Click to expand...
Click to collapse
Try going to wipe, then format data. That might fix the problem. If not, try everything again.