Related
This thread will always be a Work In Progress. Please be patient, as we receive new development it will be posted here. Thank you very much!
Do subscribe to this thread to get notified on any new updates.
If you own a G4, please proceed to this thread instead: http://forum.xda-developers.com/g4/general/guide-complete-steps-to-root-flash-t3100478. This thread also includes G4's ROM Index.
Own a V10? Proceed to this thread: http://forum.xda-developers.com/lg-v10/general/wip-complete-guide-to-v10-t3217373
First things first, this guide is made mainly for our great LG G3 D85x. Some steps may or may not work for other phones...
Please note that the results of the following methods may vary. I would advice you don't do this on a daily driver or corporate phone.
Also note that these steps WILL VOID YOUR WARRANTY. PROCEED AT YOUR OWN RISK.
For increased chances of these working, update your KDZ to Lollipop first using OTA or Flash Tool.
If you don’t know what rooting, flashing and blah blah blah means, this probably isn’t the thread for you.
I do not own much of this stuff, credit really does go to the folks stated below. Do give them a shoutout!
Enjoy!
Complete guide to all things G3:
NOTE: The chapters are in chronological order, meaning everything after Chapter 2 assumes you already have root and unlock.
---------------------------------------------------------------------------------------------------------------------------------
CHAPTER 0: TERMINOLOGY (in my own words)
- Terms
- Tidbit
(To be honest, if you need to even look at this, this thread isn't for you.)
- Root: Gaining full administrative control of your device. "Jailbreaking" in terms of Android.
- ROM: The customized operating system that your Android runs on.
- Kernel: The thingy that links software and hardware
- Radio: The thingy that sends and receives messages, calls and data.
- Flash: Installing a zipped file in Recovery Mode
- Recovery: The software that allows tweaking and flashing, and other weird stuff that will destroy your phone.
- Fastboot: The thingy that allows recovery mode to happen.
- Brick: The term says it all.
- Bootloader: Quite literal; loads the phone for bootup.
- Nandroid backup: A backup-ed image of your current system
- ADB: Android Debug Bridge; some command line tool that sends information from and to the phone to, and from the computer
- CWM: ClockWorkMod; a recovery system
- XDA: The holy website that is full of weird stuff that makes your phone wayyyy better.
Now let's paint a picture:
Imagine you are your Android phone.
Before "rooting", you are trapped in jail.
Upon "rooting and unlocking", you are released from jail.
You go to a shopping mall named "XDA".
You find a credit card lying on the floor from the company "Recovery". On the back, it says there is no passcode required, and there is a infinite amount of money inside.
You enter a store and get a sweatshirt with the word "ROM" on it.
You didn't buy the shirt, the shirt just happens to be free, but still requires you to swipe your credit card anyways.
You keep the receipt as a "backup", just in case the shirt spoils.
Just then, you get greedy and get all the badges in the store.
Stupidly, you pin all the badges on your shirt, turning it as heavy as a "brick".
Then, the shirt rips, unable to put (it rhymes with boot) it back together again.
Luckily you still have the receipt to return the shirt, and return back to your good old disgusting shirt.
Click to expand...
Click to collapse
---------------------------------------------------------
CHAPTER 1: PREREQUISITES
- The newest LG drivers are installed on your computer
- A proper and working Wi-Fi network
- Enable Developer Options
- Enable USB Debugging
- Ensure G3 is charged to at least 50%
- Original and genuine LG G3 in-box USB cable
- Backup all files!
---------------------------------------------------------
CHAPTER 2: ESSENTIALS
- Backup
- Root
- Unlock
- TWRP
- Flashing
- Restoring backups
BACKUP:
Titanium Backup Method:
Use “Titanium Backup” batch backup
1. Menu -> Batch
2. Run -> Backup user apps + system data
OR:
Manual Non-Root Method:
- Messages: “SMS Backup & Restore”
- Contacts: should be synced with the cloud, if not: Export to SIM card or SD card
- Calendar: should be synced with the cloud
- Notes: use “Google Keep”, it will be synced with the cloud
- User Dictionary: “User Dictionary Backup”
- Call Logs: “Call Logs Backup & Restore”
- Launcher (assuming you use Nova Launcher): Settings -> Backup & import settings -> Restore or manage backups
- Apps: “Helium” or any other app
- Nandroid Backup
store all backups in external SD card or transfer to your computer
ROOT:
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
(kudos to @avicohh)
1. Connect to your computer and mount MTP
2. Open “LG_One_Click_Root”
3. Press start
4. DONE!
5. To check: Download “Root Checker Basic” or any other app from the Google Play Store
UNLOCK BOOTLOADER + TWRP RECOVERY:
https://play.google.com/store/apps/details?id=b007.autorecd855
(kudos to neko_dugacko_ime, bender_007 & ingoljosh)
1. Download the app on the Google Play Store
2. Open the app
3. It should automatically start to do a backup, so you just wait
4. Tap “Flash TWRP”
5. DONE!
6. To check:
a. Turn off the phone
b. Press and hold the ‘Power’ and ‘Volume Down’ keys at the same time once the phone is fully turned off
c. Release the keys once the LG logo appears
OR: Download “Flashify” or any other app from the Google Play Store
OR: (doesn’t apply to everyone) The splash screen’s “powered by android” should appear to be in a smaller font than before
FLASHING:
Clean Flash:
1. Backup your data!
2. Reboot into TWRP Recovery
3. Go into settings and enable “Use Aroma File Manager”
4. Wipe Dalvik, Cache, System & Data
5. Flash your chosen ROM, basebands, firmware updates and other crap
6. Flash any GApps package. (the one I use: http://forum.xda-developers.com/android/general/gapps-lp-gapps-pa-gapps-aroma-installer-t3010798; kudos to @raulx222 & @slim Team)
7. Flash anything else (e.g. frameworks, boot animations, splash screens, themes etc.)
8. Reboot
9. DONE!
OR:
Dirty Flash: (flashing without wiping anything, used for updating to newer ROMs or reflashing)
1. Reboot into TWRP Recovery
2. ONLY wipe Dalvik Cache
3. Flash your chosen ROM, basebands, firmware updates and other crap
4. Flash any NEWER GApps package. If you manually installed/updated through Play Store, skip this step.
5. Flash anything else (e.g. frameworks, boot animations, splash screens, themes etc.)
6. Reboot
7. DONE!
It is perfectly fine if the first bootup takes a while, that is perfectly normal. Upon boot, Android will optimize itself so just let it do it’s work. Do put the phone under a fan as it does tend to get hot when optimizing since it is at max brightness or some dumb reason.
If it takes ages (like over 5-10mins) to boot up, it means you have luckily bricked your phone! Do source the XDA indices for any unbricking tutorial, or keep a lookout for an update on this page for instructions. (I don’t have any/don’t need to find any as I have never bricked any Android, so ya.)
Click to expand...
Click to collapse
DO NOT dirty flash if your newer ROM:
- Doesn't allow/support it
- Has a major update
- Has a Android version jump (e.g. from Lollipop to M)
- Is a totally different ROM from the previous one (e.g. from Stock to Cyanogenmod)
If after dirty flashing you experience any ROM issues (e.g. battery drain, lag etc.), I would advice you to do a clean flash instead.
Click to expand...
Click to collapse
RESTORING BACKUP:
Titanium Backup Method:
1. Use “Titanium Backup” batch restore
2. Menu -> Batch
3. Run -> Restore missing apps with data (*NOTE*: DO NOT RESTORE SYSTEM DATA)
4. Once done, go to Backup/Restore on the main app interface
5. Restore manually: Calendar Storage, Internet Bookmarks, Messaging SMS/MMS Prefs, Phone SMS/MMS/APN, User Dictionary, Wi-Fi Access Points**
6. Launcher Settings: (assuming you use Nova Launcher) Settings -> Backup & import settings -> Restore or manage backups
**What can I manually restore?**
Red: DO NOT RESTORE, YOU’LL END UP BRICKING/BOOTLOOPING YOUR PHONE!!!
White: 99% safe, go ahead
Green: 70% safe, beware of potential brick
Grey Stirkethrough: DO NOT RESTORE
Click to expand...
Click to collapse
OR:
Manual Restoration Method:
- Messages: “SMS Backup & Restore”
- Contacts: should be synced with the cloud, if not: Export to SIM card or SD card
- Calendar: should be synced with the cloud
- Notes: use “Google Keep”, it will be synced with the cloud
- User Dictionary: “User Dictionary Backup”
- Call Logs: “Call Logs Backup & Restore”
- Launcher (assuming you use Nova Launcher): Settings -> Backup & import settings -> Restore or manage backups
- Apps: “Helium” or any other app
store all backups in external SD card or transfer to your computer
---------------------------------------------------------
CHAPTER 3: ADDITIONS
- ROM Index
- XPosed
- Boot Animation
- G4 Apps Port
- G4 Weather Widget*
- TWRP Recovery Theme
- ExoPlayer for YouTube
- Ad-free
- Control
- Multi Window
- Enhanced LG Touch Assistant
- ROMs Dual Booting
- Task Management
ROM INDEX:
http://forum.xda-developers.com/showthread.php?t=2772658
(kudos to @benkxda)
XPOSED FRAMEWORK:
http://forum.xda-developers.com/showthread.php?t=3034811
(kudos to @rovo89)
1. Download “xposed-sdk21-arm-2015xxxx.zip” and flash in recovery
2. Download “XposedInstaller_3.0-xxxx.apk” and install normally
3. Download your favourite modules from the XDA indices
4. Open Titanium Backup app and freeze “LG QuickCover”
5. DONE!
BOOT ANIMATION:
6.x Marshmallow:
https://www.copy.com/s/t%3A83YzqkU0VlAHdSsY%3Bp%3A%252Fbootanimation-flashable.zip%3Boid%3A400
(kudos to @Upstreammiami)
(flashable)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” to “bootanimation.old”
5. Download “bootanimation-flashable..zip” and flash in recovery
6. DONE!
5.x Lollipop:
(if not flashable)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” and “shutdownanimation.zip” to “bootanimation.old” and “shutdownanimation.old” respectively
5. Copy your boot animation and shutdown animation of choice and rename to “bootanimation.zip” and “shutdownanimation.zip” respectively
6. Change permissions to rw-r-r-T (Read Owner, Read Group, Read Others, Write Owner, Sticky)
7. Mount R/O
8. Reboot
9. DONE!
G4 Apps Port
http://forum.xda-developers.com/lg-g3/themes-apps/lg-g4-apps-t3102687
(kudos to @LastStandingDroid)
G4's Camera App Port
1. Download "6. LGCameraApp.zip" and "8. LGCamera swap fix camera_config.xml" to your device
2. Extract "LGCameraApp.zip"
3. Download “Root Explorer” app
4. Go to root/system/priv-app/LGCameraApp
5. Mount R/W
6. Change “LGCameraApp.apk” to “LGCameraApp.old”
7. Copy the downloaded "LGCameraApp.apk" to this location
8. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
9. Go to root/system/priv-app/LGCameraApp/lib/arm
10. Change all 5 ".so" files to ".old" except "libVDBeautyShotAPI-jni.so"
11. Copy all 5 downloaded ".so" files to this location.
12. Change permissions of all 5 ".so" files to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
13. Go to root/system/etc
14. Change "camera_config.xml" to "camera_config.old"
15. Copy the downloaded "camera_config.xml" to this location
16. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
17. Mount R/O
18. Reboot
19. DONE!
**for G4's Weather Widget, refer to #Post 2 below!**
TWRP Recovery Theme
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
(kudos to @z31s1g)
1. Choose 1440x2560 Themes Folder
2. Download your chosen zip file to your device
3. Change "28xX_vx_1440_xxxx.zip" to "ui.zip"
4. Open your favourite file manager app
5. Go to the TWRP folder
6. Create a folder named "theme" **no capital letters!**
7. Copy "ui.zip" into this folder
8. Reboot to recovery
9. DONE!
Faster YouTube: ExoPlayer
http://r3pwn.github.io/yt-exoplayer.html
1. Download “Root Explorer” app
2. Go to data/data/com.google.android.youtube/shared_prefs
3. Add the following lines below "<map>":
<string name="exo_player_activation_type">ADAPTIVE</string>
<boolean name="enable_exo_cache" value="true"/>
<boolean name="show_exo_player_debug_messages" value="true"/>4. Once done, close and mount R/O
5. Force Close YouTube app in Application Settings
6. Reboot
7. Done!
Ad-Free
- Download "AdAway" app from F-Droid
https://f-droid.org/repository/browse/?fdid=org.adaway
Control
- Download "SELinux Mode Changer" from F-Droid
https://f-droid.org/repository/browse/?fdfilter=selinuxmodechanger&fdid=com.mrbimc.selinux
Multi Window for all apps
- Download "LG MultiWindow Mod"
http://forum.xda-developers.com/showthread.php?t=2707310
Enhanced LG Touch Assistant
http://forum.xda-developers.com/lg-g3/themes-apps/app-touch-assisstant-themed-t3199658
(kudos to @no14me)
1. Download “Root Explorer” app
2. Go to root/system/priv-app/LGSettingsAccessibility
3. Mount R/W
4. Change “LGSettingsAccessibility.apk” to “LGSettingsAccessibility.old”
5. Copy your accessibility of choice and rename to “LGSettingsAccessibility.apk”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. DONE!
ROMs Dual Booting
http://forum.xda-developers.com/lg-g3/general/patcher-dual-boot-rom-lg-g3-t3071546
(kudos to @chenxiaolong & @lukas77)
Task Management
- Download "Greenify" or "Servicely"
http://www.apkmirror.com/apk/oasis-feng/greenify/
http://www.apkmirror.com/apk/francisco-franco/servicely/
Honestly, I don't encourage battery managers such as "Battery Doctor" or "Clean Master (Speed Booster)" as realistically, it takes up more battery or RAM in trying to keep the app open to "properly manage the battery". Yes there are benefits such a having a zippier G3, but there are better methods out there.
Click to expand...
Click to collapse
---------------------------------------------------------
CHAPTER 4: FONTS
- Fonts
- Emoji
Changing ROM Font
http://forum.xda-developers.com/android/themes/fonts-flashable-zips-t2964304
(kudos to @gianton)
Simply flash the zip in recovery and done!
Changing Emoji
New iOS 8.3 Diverse Jaundice Emoji:
http://forum.xda-developers.com/android/software-hacking/mod-apple-8-3-diverse-color-emoji-t3136169
(kudos to @caiosilva96)
1. Download “Root Explorer” app
2. Go to root/system/fonts
3. Mount R/W
4. Change “NotoColorEmoji.ttf” to “NotoColorEmoji.old”
5. Copy your emoji of choice and rename to “NotoColorEmoji.ttf”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. Now, on your phone (with new emojis installed), go to http://emojipedia.org/skin-tone-modifiers/
10. Copy the "(skin colour)" that comes before "Emoji Modifier Fitzpatrick Type-1-2"
11. Go to your settings app, then keyboard settings, then personal dictionary
12. Create a new word "(skin colour)", shortcut of "skin2"
13. Repeat for skins 3-6
14. Reboot if you want to
15. DONE!
- To change the skin colour, type the emoji, followed by the shortcut word (e.g. "skin2")
OR:
Traditional iOS Emoji:
http://forum.xda-developers.com/lg-g3/themes-apps/howto-change-lg-smiley-to-google-smiley-t2809012
(kudos to @Soulfly999)
1. Download “Root Explorer” app
2. Go to root/system/fonts
3. Mount R/W
4. Change “NotoColorEmoji.ttf” to “NotoColorEmoji.old”
5. Copy your emoji of choice and rename to “NotoColorEmoji.ttf”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. DONE!
---------------------------------------------------------
CHAPTER 5: BATTERY
- The cliche...
- Extreme
- Disable Knock On & Code
- Changing resolution
the cliche stuff...
Turn on power saving, turn off bluetooth, Wi-Fi, data, NFC etc., turn off automatic brightness and blah blah blah...
The Extreme Battery Life
http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
(kudos to @vaisakh7)
Disabling Knock On & Code
1. Open the "Phone" or "Dialer" app
2. Dial "3845#*85x#" (where 'x' is denoted by device model; e.g. D855) - Don't worry this ISN'T a phone call, there will not be any carrier charges
3. Scroll till you find "Knock On/Off Setting"
Change resolution down to 1080p
- Download "NOMone Resolution Changer" from the Play Store:
https://play.google.com/store/apps/details?id=com.nomone.resolution_changer&hl=en
please note this chapter is incomplete.
---------------------------------------------------------
CHAPTER 6: GOODBYE
GO BACK TO STOCK + UNROOT + LOCK BOOTLOADER:
(kudos to DevTester)
1. Backup your data!
2. Download “LG Flash Tool 2014”
3. Download your stock KDZ file of choice and of device model - http://devtester.ro/projects/lg-firmwares/
4. Run “LGFlashTool2014”
5. Enter Download Mode:
a. Turn off the phone
b. Press and hold the ‘Volume Up’ key and connect your USB cable to the computer at the same time once the phone is fully turned off6. Set PhoneMode to “DIAG”
7. Select your downloaded KDZ file
8. Click “CSE Flash”
9. Click “Start” (DO NOT CLICK ANYTHING ELSE)
10. Click “OK” (DO NOT CLICK ANYTHING ELSE)
11. DONE!
---------------------------------------------------------
CHAPTER 7: MISCELLANEOUS
- Developer Settings
- Nova Launcher Secret Labs
ENABLING DEVELOPER SETTINGS:
1. Settings app
2. About phone
3. Software info
4. Tap build number repeatedly until it prompts you
**secret** ENABLING NOVA LAUNCHER LABS SETTINGS:
1. Nova Settings
2. Hold down ‘volume down’ key until it prompts you
---------------------------------------------------------------------------------------------------------------------------------
Thanks for reading. If this helped, do give me a thumbs up.
Frankly, I do not want any donations.
"Let's get this pinned on the General Thread shall we? Pretty please with cherry on top..." :victory:
“Hi, I am Lousyguyy, a guy lousy enough to do this.”
Other Guides!!
Temporary fix for 'Stagefright' exploit
Now, as we wait anxiously for our beloved OEMs to slowly update their softwares to patch for Stagefright, we are still vulnerable... UNTIL NOW! Here's a temporary protection for us, living in the slow ring of OTAs:
1. Open your messaging app.
2. Open your messenger's settings.
3. Disable "Auto receive MMS".
4. Repeat for all your other messaging apps.
5. DONE!
- If you're plainly lazy, download "Textra" messaging app which comes with in-built Stagefright protection!
Get G4's Weather Widget on ANY Launcher!
My Official Thread: http://forum.xda-developers.com/android/apps-games/lg-g4-s-weather-widget-launcher-phone-t3135381
Here's how to get the UNOFFICIAL G4's weather widget on ANY launcher, including Smart Notice.
These steps do require paid apps, so as to prevent piracy, I will not provide download links for these apps.
1. Download "Zooper Widget Pro" from the Play Store. *note: it must be PRO to make it work*
2. Download "UX 4.0 G4 for Zooper" from the Play Store.
3. Add a 4x2 Zooper Widget to any home screen.
4. Tap the widget to start.
5. Choose "UX 4.0 by N.A Dev".
6. Scroll down and choose "5x2 UX 4.0 Smart Notice."
7. Widget OnTap Action -> App List -> Weather App
8. Location -> Choose accordingly
9. Global Preferences -> Weather Provider -> Yahoo!
10. Calendar to display -> Deselect all events
... now for the complicated bits. Do follow explicitly.
11. Check the 1st Rich Text (it should be "Rect, W:388 H:192 R:0")
- Tap the pencil edit icon (most top right)
- Module OnTap -> App List -> Weather
12. Check the 2nd Rich Text ("Rect, W:400...")
- Edit
- Module -> Shortcuts -> Activities -> Smart Notice
13. Rich Text: (date, e.g. Monday, 15 June)
- Edit
- X Offset 181, Y Offset -5
- Module -> App -> Calendar
- Edit Text Manually -> Remove what's there and type this in: #DEEEE#, (enter next line) #DMMMM d#
- Lines -> 2
14. Rich Text: (location)
- X Offset -186, Y Offset -30
- Module -> App -> Maps
- Edit text manually -> Remove what's there and type this in: @ #LLOC#, (enter next line) #LCN#
- Lines -> 2
15. Rich Text: (updated on (time))
- Edit text manually -> Remove what's there and type this in: #BSTAT#: #BLEV#, #BTEMP#, #BLEFT#
16. Rich Text: "]"
- Blur 0
17. Add a Rich Text
- X Offset 0, Y Offset 4
- Edit text manually -> Remove what's there and type this in: #WCCOND#
- Size 14
... at least it's over.
18. Go back
19. Turn on Wi-Fi/Data & Location Services (if needed) & Force Update
20. Save
21. Quit Zooper App
22. Go to your home screen and tap "Refresh button".
23. Finally done!!
- Do remember to put Zooper on the Ignore List for any battery or task killer app!
---------------------------------------------------------
FAQ:
- Any battery impacts?
Shouldn't be, so long as you follow the steps correctly.
- What if my weather shows "??" or "Unknown"
Go into the Widget Settings and Force Update
- My location isn't accurate!
Manually tell the widget your location, don't use auto.
- The weather isn't accurate!
For now, there's no choice as it isn't powered by the all mighty Google or AccuWeather.
Anything else, do PM me or leave a comment below!
Changelog
14th Sep:
- Finally had time to credit all the great devs!!
- Marshmallow Boot Animation (flashable)
- Added LG Accessibility Themes
- Added TWRP Recovery Theme
- Added G4 Camera App
OLDER:
9th August: (yay for SG50!) :good:
- Temporary fix for "Stagefright" exploit
5th July:
- New iOS 8.3 Diverse Jaundice Emojis!
15th June:
- Housekeeping!!
- G4 Weather Widget with Smart Notice
- Blueprint Wallpapers thread
7th June:
- Dirty & clean flashing
- Extreme battery life
- Terminology
- Tidbit
- New wallpaper
3rd June:
- Added G4 Apps Port thread
- Added Dual Booting
- Added Multi Window
- Added reducing resolution
- Added Secret Nova Launcher Lab Settings
- Added "my Wallpaper"
4th May:
THIS THREAD WAS BORN!!!
I just got my G3 last friday.. I find this post very useful thanks man!
Plz added battery saving
jojobans said:
Plz added battery saving
Click to expand...
Click to collapse
Okay I'll add this soon. Thank you!
...
Very nice all in 1 post. Thanks. Is there an app/program anyone has used on a dual-sim G3 to unlock other band frequencies?
...
Thankyou.
Bro, this is the best post I've ever been to, I'll test this when I get free from exams and tell you the results. kudos to your compilation. I have a LG G3 D855 V20G
...
Hello guys i have d855 int and i can't understand if this is a bumped twrp (from Google Play link you mention) please consider mention that in Google Play and here of course. Please be noob friendly
Sent from my MI 2S using Tapatalk
NightHeron said:
Hello guys i have d855 int and i can't understand if this is a bumped twrp (from Google Play link you mention) please consider mention that in Google Play and here of course. Please be noob friendly
Sent from my MI 2S using Tapatalk
Click to expand...
Click to collapse
Bro what is your firmware version, I think I can help is it V20G?
http://forum.xda-developers.com/lg-g3/general/d855-one-click-root-twrp-recovery-t3072767
^Look there is a first reccomended method if that fails use the firmware version below. need more help PM me.
NightHeron said:
Hello guys i have d855 int and i can't understand if this is a bumped twrp (from Google Play link you mention) please consider mention that in Google Play and here of course. Please be noob friendly
Sent from my MI 2S using Tapatalk
Click to expand...
Click to collapse
Bumping = Unlocking with TWRP, so yes it is!
So long as you use the app accordingly, most probably you won't get any issues regarding the bootloader or recovery.
Lousyguyy said:
Bumping = Unlocking with TWRP, so yes it is!
So long as you use the app accordingly, most probably you won't get any issues regarding the bootloader or recovery.
Click to expand...
Click to collapse
But some ROMs mentioned as bumped and another not... So, isn't it a difference? Or I can flash anything like bumped or not bumped ROMs
As for the second post I have V20h.. Is that good?
Sent from my MI 2S using Tapatalk
...
6.x Marshmallow Boot Animation (flashable):
https://www.copy.com/s/t%3A83YzqkU0VlAHdSsY%3Bp%3A%252Fbootanimation-flashable.zip%3Boid%3A400
(kudos to Upstreammiami)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” to “bootanimation.old”
5. Download “bootanimation-flashable..zip” and flash in recovery
6. DONE!
19th Sep:
- Finally had time to credit all the great devs!!
- Marshmallow Boot Animation (flashable)
- Added LG Accessibility Themes
- Added TWRP Recovery Theme
- Added G4 Camera App
This thread will always be a Work In Progress. Please be patient, as we receive new development it will be posted here. Thank you very much!
Do subscribe to this thread to get notified on any new updates.
If you own a G3, please proceed to this thread instead: http://forum.xda-developers.com/lg-g3/general/guide-complete-tutorial-to-root-flash-t3098959
Own a V10? Proceed to this thread: http://forum.xda-developers.com/lg-v10/general/wip-complete-guide-to-v10-t3217373
First things first, this guide is made mainly for our great LG G4 D815. Some steps may or may not work for other phones...
Please note that the results of the following methods may vary. I would advice you don't do this on a daily driver or corporate phone.
Also note that these steps WILL VOID YOUR WARRANTY. PROCEED AT YOUR OWN RISK.
For increased chances of these working, update your KDZ to Lollipop first using OTA or Flash Tool.
If you don’t know what rooting, flashing and blah blah blah means, this probably isn’t the thread for you.
I do not own much of this stuff, credit really does go to the folks stated below. Do give them a shoutout!
Enjoy!
Complete guide to all things G4:
NOTE: The chapters are in chronological order, meaning everything after Chapter 2 assumes you already have root and unlock.
---------------------------------------------------------------------------------------------------------------------------------
CHAPTER 0: TERMINOLOGY (in my own words)
- Terms
- Tidbit
(To be honest, if you need to even look at this, this thread isn't for you.)
- Root: Gaining full administrative control of your device. "Jailbreaking" in terms of Android.
- ROM: The customized operating system that your Android runs on.
- Kernel: The thingy that links software and hardware
- Radio: The thingy that sends and receives messages, calls and data.
- Flash: Installing a zipped file in Recovery Mode
- Recovery: The software that allows tweaking and flashing, and other weird stuff that will destroy your phone.
- Fastboot: The thingy that allows recovery mode to happen.
- Brick: The term says it all.
- Bootloader: Quite literal; loads the phone for bootup.
- Nandroid backup: A backup-ed image of your current system
- ADB: Android Debug Bridge; some command line tool that sends information from and to the phone to, and from the computer
- CWM: ClockWorkMod; a recovery system
- XDA: The holy website that is full of weird stuff that makes your phone wayyyy better.
Now let's paint a picture:
Imagine you are your Android phone.
Before "rooting", you are trapped in jail.
Upon "rooting and unlocking", you are released from jail.
You go to a shopping mall named "XDA".
You find a credit card lying on the floor from the company "Recovery". On the back, it says there is no passcode required, and there is a infinite amount of money inside.
You enter a store and get a sweatshirt with the word "ROM" on it.
You didn't buy the shirt, the shirt just happens to be free, but still requires you to swipe your credit card anyways.
You keep the receipt as a "backup", just in case the shirt spoils.
Just then, you get greedy and get all the badges in the store.
Stupidly, you pin all the badges on your shirt, turning it as heavy as a "brick".
Then, the shirt rips, unable to put (it rhymes with boot) it back together again.
Luckily you still have the receipt to return the shirt, and return back to your good old disgusting shirt.
---------------------------------------------------------
CHAPTER 1: PREREQUISITES
- The newest LG drivers are installed on your computer
- A proper and working Wi-Fi network
- Enable Developer Options
- Enable USB Debugging
- Ensure G4 is charged to at least 50%
- Original and genuine LG G4 in-box USB cable
- Backup all files!
---------------------------------------------------------
CHAPTER 2: ESSENTIALS
- Backup
- Unlock
- TWRP
- Flashing
- Restoring Backup
BACKUP:
Titanium Backup Method:
Use “Titanium Backup” batch backup
1. Menu -> Batch
2. Run -> Backup user apps + system data
OR:
Manual Non-Root Method:
- Messages: “SMS Backup & Restore”
- Contacts: should be synced with the cloud, if not: Export to SIM card or SD card
- Calendar: should be synced with the cloud
- Notes: use “Google Keep”, it will be synced with the cloud
- User Dictionary: “User Dictionary Backup”
- Call Logs: “Call Logs Backup & Restore”
- Launcher (assuming you use Nova Launcher): Settings -> Backup & import settings -> Restore or manage backups
- Apps: “Helium” or any other app
- Nandroid Backup
store all backups in external SD card or transfer to your computer
UNLOCK BOOTLOADER (official!):
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryTypeCode=ANRS
(direct link from LG Developer Resource Center!)
NOTE: THIS CANNOT BE UNDONE!
TWRP Touch Recovery:
http://forum.xda-developers.com/g4/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3125859
(kudos to @Dees_Troy & TeamWin)
1. Download "TWRP Manager" app from the Google Play Store
2. Advanced -> Install Recovery
3. DONE!
FLASHING:
Clean Flash:
1. Backup your data!
2. Reboot into TWRP Recovery
3. Go into settings and enable “Use Aroma File Manager”
4. Wipe Dalvik, Cache, System & Data
5. Flash your chosen ROM, basebands, firmware updates and other crap
6. Flash any GApps package. (the one I use: http://forum.xda-developers.com/android/general/gapps-lp-gapps-pa-gapps-aroma-installer-t3010798; kudos to @raulx222 & @slim Team)
7. Flash anything else (e.g. frameworks, boot animations, splash screens, themes etc.)
8. Reboot
9. DONE!
OR:
Dirty Flash: (flashing without wiping anything, used for updating to newer ROMs or reflashing)
1. Reboot into TWRP Recovery
2. ONLY wipe Dalvik Cache
3. Flash your chosen ROM, basebands, firmware updates and other crap
4. Flash any NEWER GApps package. If you manually installed/updated through Play Store, skip this step.
5. Flash anything else (e.g. frameworks, boot animations, splash screens, themes etc.)
6. Reboot
7. DONE!
It is perfectly fine if the first bootup takes a while, that is perfectly normal. Upon boot, Android will optimize itself so just let it do it’s work. Do put the phone under a fan as it does tend to get hot when optimizing since it is at max brightness or some dumb reason.
If it takes ages (like over 5-10mins) to boot up, it means you have luckily bricked your phone! Do source the XDA indices for any unbricking tutorial, or keep a lookout for an update on this page for instructions. (I don’t have any/don’t need to find any as I have never bricked any Android, so ya.)
Click to expand...
Click to collapse
DO NOT dirty flash if your newer ROM:
- Doesn't allow/support it
- Has a major update
- Has a Android version jump (e.g. from Lollipop to M)
- Is a totally different ROM from the previous one (e.g. from Stock to Cyanogenmod)
If after dirty flashing you experience any ROM issues (e.g. battery drain, lag etc.), I would advice you to do a clean flash instead.
Click to expand...
Click to collapse
RESTORING BACKUP:
Titanium Backup Method:
1. Use “Titanium Backup” batch restore
2. Menu -> Batch
3. Run -> Restore missing apps with data (*NOTE*: DO NOT RESTORE SYSTEM DATA)
4. Once done, go to Backup/Restore on the main app interface
5. Restore manually: Calendar Storage, Internet Bookmarks, Messaging SMS/MMS Prefs, Phone SMS/MMS/APN, User Dictionary, Wi-Fi Access Points**
6. Launcher Settings: (assuming you use Nova Launcher) Settings -> Backup & import settings -> Restore or manage backups
**What can I manually restore?**
Red: DO NOT RESTORE, YOU’LL END UP BRICKING/BOOTLOOPING YOUR PHONE!!!
White: 99% safe, go ahead
Green: 70% safe, beware of potential brick
Grey Stirkethrough: DO NOT RESTORE
Click to expand...
Click to collapse
OR:
Manual Restoration Method:
- Messages: “SMS Backup & Restore”
- Contacts: should be synced with the cloud, if not: Export to SIM card or SD card
- Calendar: should be synced with the cloud
- Notes: use “Google Keep”, it will be synced with the cloud
- User Dictionary: “User Dictionary Backup”
- Call Logs: “Call Logs Backup & Restore”
- Launcher (assuming you use Nova Launcher): Settings -> Backup & import settings -> Restore or manage backups
- Apps: “Helium” or any other app
store all backups in external SD card or transfer to your computer
---------------------------------------------------------
CHAPTER 3: ADDITIONS
- Temporary fix for Stagefright exploit
- Weather Widget
- XPosed
- Boot Animation
- TWRP Recovery Theme
- ExoPlayer for YouTube
- Ad-free
- Control
- Enhanced LG Touch Assistant
- Task Management
Temporary fix for 'Stagefright' exploit
Now, as we wait anxiously for our beloved OEMs to slowly update their softwares to patch for Stagefright, we are still vulnerable... UNTIL NOW! Here's a temporary protection for us, living in the slow ring of OTAs:
1. Open your messaging app.
2. Open your messenger's settings.
3. Disable "Auto receive MMS".
4. Repeat for all your other messaging apps.
5. DONE!
- If you're plainly lazy, download "Textra" messaging app which comes with in-built Stagefright protection!
Get G4's Weather Widget on ANY Launcher! (unofficial - Zooper theme)
My Official Thread: http://forum.xda-developers.com/android/apps-games/lg-g4-s-weather-widget-launcher-phone-t3135381
Here's how to get the UNOFFICIAL G4's weather widget on ANY launcher, including Smart Notice.
These steps do require paid apps, so as to prevent piracy, I will not provide download links for these apps.
1. Download "Zooper Widget Pro" from the Play Store. *note: it must be PRO to make it work*
2. Download "UX 4.0 G4 for Zooper" from the Play Store.
3. Add a 4x2 Zooper Widget to any home screen.
4. Tap the widget to start.
5. Choose "UX 4.0 by N.A Dev".
6. Scroll down and choose "5x2 UX 4.0 Smart Notice."
7. Widget OnTap Action -> App List -> Weather App
8. Location -> Choose accordingly
9. Global Preferences -> Weather Provider -> Yahoo!
10. Calendar to display -> Deselect all events
11. Check the 1st Rich Text (it should be "Rect, W:388 H:192 R:0")
- Tap the pencil edit icon (most top right)
- Module OnTap -> App List -> Weather
12. Check the 2nd Rich Text ("Rect, W:400...")
- Edit
- Module -> Shortcuts -> Activities -> Smart Notice
13. Rich Text: (date, e.g. Monday, 15 June)
- Edit
- X Offset 181, Y Offset -5
- Module -> App -> Calendar
- Edit Text Manually -> Remove what's there and type this in: #DEEEE#, (enter next line) #DMMMM d#
- Lines -> 2
14. Rich Text: (location)
- X Offset -186, Y Offset -30
- Module -> App -> Maps
- Edit text manually -> Remove what's there and type this in: @ #LLOC#, (enter next line) #LCN#
- Lines -> 2
15. Rich Text: (updated on (time))
- Edit text manually -> Remove what's there and type this in: #BSTAT#: #BLEV#, #BTEMP#, #BLEFT#
16. Rich Text: "]"
- Blur 0
17. Add a Rich Text
- X Offset 0, Y Offset 4
- Edit text manually -> Remove what's there and type this in: #WCCOND#
- Size 14
18. Go back
19. Turn on Wi-Fi/Data & Location Services (if needed) & Force Update
20. Save
21. Quit Zooper App
22. Go to your home screen and tap "Refresh button".
23. Finally done!!
- Do remember to put Zooper on the Ignore List for any battery or task killer app!
---------------------------------------------------------
FAQ:
- Any battery impacts?
Shouldn't be, so long as you follow the steps correctly.
- What if my weather shows "??" or "Unknown"
Go into the Widget Settings and Force Update
- My location isn't accurate!
Manually tell the widget your location, don't use auto.
- The weather isn't accurate!
For now, there's no choice as it isn't powered by the all mighty Google or AccuWeather.---------------------------------------------------------
XPOSED FRAMEWORK:
http://forum.xda-developers.com/showthread.php?t=3034811
(kudos to @rovo89)
1. Download “xposed-sdk21-arm-2015xxxx.zip” and flash in recovery
2. Download “XposedInstaller_3.0-xxxx.apk” and install normally
3. Download your favourite modules from the XDA indices
4. Open Titanium Backup app and freeze “LG QuickCover”
5. DONE!
BOOT ANIMATION:
6.x Marshmallow:
https://www.copy.com/s/t%3A83YzqkU0VlAHdSsY%3Bp%3A%252Fbootanimation-flashable.zip%3Boid%3A400
(kudos to @Upstreammiami)
(flashable)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” to “bootanimation.old”
5. Download “bootanimation-flashable..zip” and flash in recovery
6. DONE!
5.x Lollipop:
(if not flashable)
1. Download “Root Explorer” app
2. Go to root/system/media
3. Mount R/W
4. Change “bootanimation.zip” and “shutdownanimation.zip” to “bootanimation.old” and “shutdownanimation.old” respectively
5. Copy your boot animation and shutdown animation of choice and rename to “bootanimation.zip” and “shutdownanimation.zip” respectively
6. Change permissions to rw-r-r-T (Read Owner, Read Group, Read Others, Write Owner, Sticky)
7. Mount R/O
8. Reboot
9. DONE!
TWRP Recovery Theme
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
(kudos to @z31s1g)
1. Choose 1440x2560 Themes Folder
2. Download your chosen zip file to your device
3. Change "28xX_vx_1440_xxxx.zip" to "ui.zip"
4. Open your favourite file manager app
5. Go to the TWRP folder
6. Create a folder named "theme" **no capital letters!**
7. Copy "ui.zip" into this folder
8. Reboot to recovery
9. DONE!
Faster YouTube: ExoPlayer
http://r3pwn.github.io/yt-exoplayer.html
1. Download “Root Explorer” app
2. Go to data/data/com.google.android.youtube/shared_prefs
3. Add the following lines below "<map>":
<string name="exo_player_activation_type">ADAPTIVE</string>
<boolean name="enable_exo_cache" value="true"/>
<boolean name="show_exo_player_debug_messages" value="true"/>4. Once done, close and mount R/O
5. Force Close YouTube app in Application Settings
6. Reboot
7. Done!
Ad-Free
- Download "AdAway" app from F-Droid
https://f-droid.org/repository/browse/?fdid=org.adaway
Control
- Download "SELinux Mode Changer" from F-Droid
https://f-droid.org/repository/browse/?fdfilter=selinuxmodechanger&fdid=com.mrbimc.selinux
Enhanced LG Touch Assistant
http://forum.xda-developers.com/lg-g3/themes-apps/app-touch-assisstant-themed-t3199658
(kudos to @no14me)
1. Download “Root Explorer” app
2. Go to root/system/priv-app/LGSettingsAccessibility
3. Mount R/W
4. Change “LGSettingsAccessibility.apk” to “LGSettingsAccessibility.old”
5. Copy your accessibility of choice and rename to “LGSettingsAccessibility.apk”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. DONE!
Task Management
- Download "Greenify" or "Servicely"
http://www.apkmirror.com/apk/oasis-feng/greenify/
http://www.apkmirror.com/apk/francisco-franco/servicely/
Honestly, I don't encourage battery managers such as "Battery Doctor" or "Clean Master (Speed Booster)" as realistically, it takes up more battery or RAM in trying to keep the app open to "properly manage the battery". Yes there are benefits such a having a zippier G3, but there are better methods out there.
Click to expand...
Click to collapse
---------------------------------------------------------
CHAPTER 4: FONTS
- Font
- Emoji
Changing ROM Font
http://forum.xda-developers.com/android/themes/fonts-flashable-zips-t2964304
(kudos to @gianton)
Simply flash the zip in recovery and done!
Changing Emoji
New iOS 8.3 Diverse Jaundice Emoji:
http://forum.xda-developers.com/android/software-hacking/mod-apple-8-3-diverse-color-emoji-t3136169
(kudos to @caiosilva96)
1. Download “Root Explorer” app
2. Go to root/system/fonts
3. Mount R/W
4. Change “NotoColorEmoji.ttf” to “NotoColorEmoji.old”
5. Copy your emoji of choice and rename to “NotoColorEmoji.ttf”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. Now, on your phone (with new emojis installed), go to http://emojipedia.org/skin-tone-modifiers/
10. Copy the "(skin colour)" that comes before "Emoji Modifier Fitzpatrick Type-1-2"
11. Go to your settings app, then keyboard settings, then personal dictionary
12. Create a new word "(skin colour)", shortcut of "skin2"
13. Repeat for skins 3-6
14. Reboot if you want to
15. DONE!
- To change the skin colour, type the emoji, followed by the shortcut word (e.g. "skin2")
OR:
Traditional iOS Emoji:
http://forum.xda-developers.com/lg-g3/themes-apps/howto-change-lg-smiley-to-google-smiley-t2809012
(kudos to @Soulfly999)
1. Download “Root Explorer” app
2. Go to root/system/fonts
3. Mount R/W
4. Change “NotoColorEmoji.ttf” to “NotoColorEmoji.old”
5. Copy your emoji of choice and rename to “NotoColorEmoji.ttf”
6. Change permissions to rw-r-r (Read Owner, Read Group, Read Others, Write Owner)
7. Mount R/O
8. Reboot
9. DONE!
---------------------------------------------------------
CHAPTER 5: BATTERY
- The cliche...
- Extreme
- Resolution changing
the cliche stuff...
Turn on power saving, turn off bluetooth, Wi-Fi, data, NFC etc., turn off automatic brightness and blah blah blah...
The Extreme Battery Life
http://forum.xda-developers.com/android/general/guide-extreme-battery-life-t3095884
(kudos to @vaisakh7)
Change resolution down to 1080p
- Download "NOMone Resolution Changer" from the Play Store:
https://play.google.com/store/apps/details?id=com.nomone.resolution_changer&hl=en
(more coming soon)
---------------------------------------------------------
CHAPTER 6: GOODBYE
GO BACK TO STOCK + UNROOT + LOCK BOOTLOADER:
1. Backup your data!
2. Download “LG Flash Tool 2014”
3. Download your stock KDZ file of choice and of device model
4. Run “LGFlashTool2014”
5. Enter Download Mode:
a. Turn off the phone
b. Press and hold the ‘Volume Up’ key and connect your USB cable to the computer at the same time once the phone is fully turned off6. Set PhoneMode to “DIAG”
7. Select your downloaded KDZ file
8. Click “CSE Flash”
9. Click “Start” (DO NOT CLICK ANYTHING ELSE)
10. Click “OK” (DO NOT CLICK ANYTHING ELSE)
11. DONE!
(doesn't work any more )
---------------------------------------------------------
CHAPTER 7: MISCELLANEOUS
- Developer Settings
- Nova Launcher Secret Labs
- Free Google Drive
- Official wallpapers
ENABLING DEVELOPER SETTINGS:
1. Settings app
2. About phone
3. Software info
4. Tap build number repeatedly until it prompts you
**secret** ENABLING NOVA LAUNCHER LABS SETTINGS:
1. Nova Settings
2. Hold down ‘volume down’ key until it prompts you
FREE 100GB GOOGLE DRIVE STORAGE!!!
1. Open Drive Settings
2. Finish the Product Tour to redeem!
OFFICIAL G4 WALLPAPERS:
http://www.phonearena.com/news/Download-the-official-LG-G4-wallpapers-here-leather-background-included_id69079
(kudos to PhoneArena)
---------------------------------------------------------------------------------------------------------------------------------
Thanks for reading. If this helped, do give me a thumbs up.
Frankly, I do not want any donations.
"Let's get this pinned on the General Thread shall we? Pretty please with cherry on top..." :victory:
“Hi, I am Lousyguyy, a guy lousy enough to do this.”
ROM Index:
NOTE: I'll try my best to update this thread every weekend. Please PM or leave a comment below if I happened to miss out your ROM. Thanks guys!
---------------------------------------------------------------------------------------------------------------------------------
STOCK-based ROMs:
1. H815 v10C
http://forum.xda-developers.com/g4/development/stock-h815-10c-stock-rom-kdz-t3141866
by @autoprime
2. H815 v10A
http://forum.xda-developers.com/g4/development/rom-h815-10a-stock-rooted-rom-t3129036
by @autoprime
3. H811 (T-Mo) v10H
http://forum.xda-developers.com/g4/development/rom-lg-g4-h811-10h-t-mobile-usa-stock-t3142779
by @MicroMod777
4. All
http://forum.xda-developers.com/g4/development/h815-eu-l-p-t-sea-twn-t3176195
by @Marcosuper7
5. All v10G Genisys
http://forum.xda-developers.com/g4/development/h815-genisys-rom-1-0-classic-v10g-t3192649
by @BySezerSimsek
---------------------------------------------------------
AOSP ROMs:
1. H811/H815 5.1.1 BlissPop and Cyanogenmod 12.1 ROM
http://forum.xda-developers.com/g4/development/h811-h815-blisspop-cyanogenmod-12-1-t3185593
by @genesixxbf3
---------------------------------------------------------------------------------------------------------------------------------
Changelog
20th Sep:
- Complete thread overhaul
- Integrated ROM Index thread into this mega thread
OLDER:
14th Sep:
- Finally had time to credit all the great devs!!
- Marshmallow Boot Animation (flashable)
- Added LG Accessibility Themes
9th August: (yay for SG50!) :good:
- Temporary fix for "Stagefright" exploit
5th July:
- New iOS 8.3 diverse jaundice emojis!
15th June:
- Housekeeping!!
- G4 Weather Widget with Smart Notice
- Blueprint Wallpapers thread
7th June:
- My New ROM Index thread!!!: http://forum.xda-developers.com/g4/general/index-complete-g4-rom-index-t3129338/post61210790#post61210790
- Dirty & clean flashing
- Extreme battery life
- Terminology
- Tidbit
- New lock screen wallpaper
3rd June:
- Added Official LG Unlock
- Added TWRP
- Added Secret Nova Launcher Lab Settings
- Added LG Wallpapers
- Added Free Drive Storage Redemption (may not work for some)
- added more stuff I forgot.
- Removed Relocking
5th May:
THIS THREAD WAS BORN!!!
My Comment
Coming soon.
Several of the steps you list in here require root.
Many of the steps you list in message #1 require root priviledges:
Titanium Backup, any process using Root Explorer, Xposed, Greenify, AdAway all require root access. Maybe that requirement should be mentioned in each chapter.
eagerly waiting for any possible root methods.
i haven't got my hands on my G4, but it would be good to know that when my phone arrived i can root the hell out of it
i get my G4 v23-24, hopefully there is a root already then!!
*root is essential.
I would like to add a request for "enable wifi hotspot" to be added to the first post, when possible.
This is my first LG phone and I hope I can get the wifi hotspot working on Sprint once I get the G4 rooted.
Thanks a lot.
ahoythere said:
I would like to add a request for "enable wifi hotspot" to be added to the first post, when possible.
This is my first LG phone and I hope I can get the wifi hotspot working on Sprint once I get the G4 rooted.
Thanks a lot.
Click to expand...
Click to collapse
This gets added to almost any ROM anyways, so you should be fine.
Has anyone found a reliable place to get the LG G4 USB drivers? I've connected my G4 to the Mac, installed the drivers through the popup that appears, and doesn't work. The Mac can't detect the G4, and neither can adb.
EDIT: Never mind. Using LG PC suite seems to work. Adb connected.
Dennisg34 said:
This gets added to almost any ROM anyways, so you should be fine.
Click to expand...
Click to collapse
Not everyone wants to install a full ROM for select functions however.
Lock-N-Load said:
Not everyone wants to install a full ROM for select functions however.
Click to expand...
Click to collapse
True. Most of us just want root then we can use xposed to get the rest of the function we want.
frigidazzi said:
True. Most of us just want root then we can use xposed to get the rest of the function we want.
Click to expand...
Click to collapse
Xposed going to require custom recovery also
Can we helps devs to get more info for root? I have the G4 currently
I'm an LG newbie. It would be nice if you could link drivers and flashing software in your post.
I've owned just about every Motorola, some HTCs and Samsung phones and rooted and rom'd for years. This will be my first LG. Motorola has just become too much a pain in this area though rumor is the BL is locked on the LG too. Even root and xposed would be enough to protect my privacy.
ordered mine today
now we wait for root
Hi guys
Got my G4 earlier today. Just love it! One problem, my music on sd card doas not show up in the music app. And also when using MX player videos on sd card do not show up.
Sent from my LG-H815 using XDA Free mobile app
Thanks a lot.
tichyb said:
Hi guys
Got my G4 earlier today. Just love it! One problem, my music on sd card doas not show up in the music app. And also when using MX player videos on sd card do not show up.
Sent from my LG-H815 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried PowerAmp or other non-stock music player? This would kill the deal for me. I suspect there are options and would love to know PowerAmp, in particular, works with the external card. I have way too much music I need to have with me which is why I require sdcard support.
AliceBToklas said:
Have you tried PowerAmp or other non-stock music player? This would kill the deal for me. I suspect there are options and would love to know PowerAmp, in particular, works with the external card. I have way too much music I need to have with me which is why I require sdcard support.
Click to expand...
Click to collapse
I did not try the stock, because I have the full version of poweramp and it is working very well. My music is on the exsternal sd card
How To Install Flyme OS 6.1.0.0G Global Stable on Chinese Pro 6 Plus devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Guide to install the Global ROM Flyme OS 6Global on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.
Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Update to a newer version:
Copy the new version to Internal storage
Open Flashfire, click on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write.
Now you will see a screen with all the actions that will be done, select the action called Reboot and un-thick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Note: In case of any problems and you want a clean installation, add the wipe action from the + button before flashing. But it should not be needed.
Note: it seems to be a problem with supersu if you don't wipe data before update. so to avoid problems, you should wipe before flash.
If you want to keep your apps and data, you should make a data (data partition only) backup from flashfire before updating. then wipe and update, follow instructions to root and to have super su. After that you can use flshfire to restore data backup (only data partition) .
also you can use kingroot but its not compatible with flashfire.
If you already updated, you can use titanium backup(give root permision from system root in settings, security root permissions)make a backup of your apps and then follow the guide below How to go back to stock chinese ROM in case of disaster, after that follow the instruction of new installation and when you have the that done, you can rstore your apps with titanium backup.
[/LIST]
First Time Installation:
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
[*]Copy the downloaded ROM to Internal storage
[*]Open Flashfire, give root permissions and click on the + button,
[*]Select Wipe and then ok
[*]Click again on the + button and choose Flash Zip / OTA
[*]Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
[*]Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
[*]Finally click on FLASH and wait until the process ends.
[*]Enjoy...
Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: [url]http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.
Older Versions:
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
ShaolinMilk said:
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
Click to expand...
Click to collapse
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
bihariel said:
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
Click to expand...
Click to collapse
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
ShaolinMilk said:
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
Click to expand...
Click to collapse
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
bihariel said:
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
Click to expand...
Click to collapse
Thanks dude! Looking forward to it.
im surprised at how small the response to this phone is....just stumbled upon it while looking for a new device.
this is rather off-topic but this seems to be the most active thread
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
mr.mgmg said:
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
Click to expand...
Click to collapse
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
ShaolinMilk said:
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
Click to expand...
Click to collapse
Not really, the battery is surprising me on this ROM. Maybe you sould use a battery monitoring app and see whats draining it. If not, do a factory reset and see if it still prsists.
bihariel said:
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
Click to expand...
Click to collapse
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
bihariel said:
How To Install Flyme OS 6.7.4.11 Global on Chinese Pro 6 Plus
This is a Guide to install the Global ROM Flyme OS 6.7.4.11 on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.
Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire
Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus
Copy the downloaded ROM to Internal storage
Open Flashfire, give root permissions and click on the + button,
Select Wipe and then ok
Click again on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.
Click to expand...
Click to collapse
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
mr.mgmg said:
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
Click to expand...
Click to collapse
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Tony72 said:
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
Click to expand...
Click to collapse
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
bihariel said:
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
Click to expand...
Click to collapse
Thanks a lot!, I'll read all as soon I could
BE Careful
Removed
bihariel said:
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Click to expand...
Click to collapse
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
mr.mgmg said:
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
Click to expand...
Click to collapse
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
bihariel said:
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
Click to expand...
Click to collapse
ealaykum alssalam
thanks bro for help
i flashed the rom without change anything in script and its work
u know when the stable rom will out?
I guess global version will come within 2 days.
http://www.oneplusbbs.com/forum.php?mod=viewthread&tid=3876301&mobile=2
Step by Step Guide - Android 8.0 Chinese beta. Clean/dirty flash lock/UL BL.
Hello Guys,
To make things easy heres a step by step guide to install the chinese oreo beta on locked/unlocked Bl for the 5T
So I got my hands on the android oreo chinese beta (H2OS) and flashed it on my oneplus 5t which was on a locked bootloader and running stable 4.7.6 with star wars theme enabled. Here's a step by step guide to install H2os Oreo beta rom wtihout losing any data.
WARNING : BACKUP - BACKUP - BACKUP and flash at your own risk. I would not be responsible for any loss.
METHOD 1 : FOR LOCKED/UNLOCKED BL BUT WITH STOCK RECOVERY
1) Download the rom from this link : https://goo.gl/4nPrxx
2) Ensure you have backed up all your important data and make sure you have atleast 50% battery.
3) Copy the downloaded zip to phones internal memory (make sure its in the main directory and not in any folder.
4) Go to settings > system updates > top right hand corner tap the settings icon > tap local upgrade > tap on the downloaded file > tap update now and wait for it to finish installing the update. ( first boot will take 8 to 10 minutes so please dont panic.
5) Once first boot is done you may have a force close for 1 or 2 apps just uninstall them and reinstall from the play store and you are good to go. Also star wars theme continues to work and all basic functions work as expected.
6) If you want a clean install or having many force closures please perform a factory reset and everything should be resolved.
https://forum.xda-developers.com/oneplus-5t/how-to/step-step-guide-android-8-0-chinese-t3726772
Yup, I'm downloading now. This should be fun.
Mike02z said:
Yup, I'm downloading now. This should be fun.
Click to expand...
Click to collapse
When you're done, can you tell us what exactly has changed? I went to the chinese page, but google translator wasn't so helpful tbh.
devil188 said:
When you're done, can you tell us what exactly has changed? I went to the chinese page, but google translator wasn't so helpful tbh.
Click to expand...
Click to collapse
This update ushered in based on the new Android O (8.0) hydrogen OS
【desktop】
- Optimized application shortcut menu
- Integrate icon options with app shortcuts
- Shot on OnePlus Add photos upload function
【system】
New shortcut settings panel design
- Android O new features, including but not limited to:
****1. Add Picture in Picture function
****2 new auto-fill (Auto-Fill) function
****3 new smart text selection (Smart Text Selection)
- Update Android system patch
Known Issues
1. WeChat fingerprint payment can not be used temporarily
2. Third-party applications may not compatible list, please download the attachment compression package. Android O may not be compatible with the application list. Rar (25.83 KB, Downloads: 364)
This a translation of the update. I used g translate. :good:
It seems to run OK. Obviously some stuff is still in Chinese. I tried to flash TWRP and TWRP booted but even after a clearing cache/Div the ROM then would not boot. I just got a white light.
For initial install I did a complete data format then loaded the stock recovery ,and the latest stable OOS, then flashed the Chinese O.. You do need to pull a PlayStore .APK and reload all the Google apps after a flash.
Unless this one is different than the one they have on their main site, it's not Oreo. I flashed it, tried flashing Gapps and Gapps said I had to flash appropriate Gapps for 7.1 :/
Very nice. Thanks for the write-up!
Already open beta 3 now.
Thread moved to : https://forum.xda-developers.com/le-max-2/how-to/le-max-3-eui-5-9-021sr2-diamantik-t3856853
Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, your data , i will laugh at you.
I am happy to present you , the best EUI 5.9.21S experience for the Le Max 3 ( X850 ) .
Things changed and improved :
-> Launcher now support drawer mode ( ported from 28S)
-> Latest Super Manager , with data usage notification ( also from 28S)
-> Removed many useless applications
-> Improved system audio
-> The quiet sound in headphones is now fixed
Tip: Turn off Dolby Atmos , the speaker, earpiece, and headphones will be way louder .
-> Kernel Tweaks and battery optimization scrips
-> [ Update 13/10 ] Changed the behaviour of the deep sleep.
If you encount a bug , please tell me the details in this thread .
Download : http://bit.ly/2yNoUui
** The " R(Number) " means the release number of the ROM , like R1 - first release
The Deep sleep tuner :
http://bit.ly/2EwB9kU
*Install via TWRP above the current ROM , you don't need to change or wipe nothing .
It really helps with the battery life
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed . ( How to do that ( my post link) : https://forum.xda-developers.com/showpost.php?p=76620374&postcount=7 )
**After unlocking the bootloader , you get a green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : To boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do an wipe on system , data , cache .
Also please take a backup ,if you have already TWRP , and in case you want to restore back.
2. Download the "Deep sleep tuner" and the " 21S Firmware & Modem by @moto999999 ": https://androidfilehost.com/?fid=674106145207488760
3. Download and copy the ROM , Universal_GMS_Doze.zip , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. Flash the Magisk
7. Flash the Universal_GMS_Doze
Apps that I recommend : ( they are not in the ROM)
( Updated 12/10 )
( Currently using all from this list )
1. Power Shade ( adds a new notification bar with android P style , with changed notifications and toggles for all the things. )
**Tip : Select USA region for showing apps in status bar , not an 3 dot circle
2. Add Away ( Removes adds system-wide)
3. Install button Unlocker ( Allows you to bypass the restriction "screen overlay detected" and allow the permison to apps )
4. AndroiTS GPS Test Pro ( for GPS to indentify you faster , first time after instaling the ROM )
5. Greenify - helps with the battery life
6. Volume Booster by GOODEV - boost even more the headphone sound :laugh:
For those that want to freeze apps , a simple and bug-less list :
Note : Is not mandatory !!!
LeEco account
LeEco setup wizard
MyLeEco
LeTVEcoProvider
ANT HAL Service
Fido ( all 3 apps )
VCalendar
Market Feedback Agent,
Following Feed
Fast Transfer
Effect Service
Crash Handler
EuiTransfer.AppData
Bubbles
and AOSP keyboard , if you have Gboard , or another keyboard .
You can use Titanium Backup ( Pro - required ) for this , or IceBox , or any other apps
Credits to @moto999999 for :
- Initial release
- Tweaks to the kernel and battery
@Luis4x4 for all the research he made , for the money he spent on the unlocking bootloader ( ~600 $ ) , and for paying the unbricking of my device . And both for being awesome guys
Credits for rest of the work goes to me @diamantik
Reserved
( In future : maybe i will be able to unlock the lens blur processing for current date )
Will be great ??
[email protected] said:
( In future : maybe i will be able to unlock the lens blur processing for current date )
Will be great
Click to expand...
Click to collapse
Well i will try to unlock , but i really don't think i will be able to do that :crying:
If i succed i will update the post
unlock the lens blur processing for current date
Really like this!
min1968 said:
unlock the lens blur processing for current date
Really like this!
Click to expand...
Click to collapse
I wish i could
I have tried , but failed , need someone who can help , but idk who
diamantik said:
Disclaimer : I am not responsible for bricked devices, dead phones, or you getting fired because the alarm app failed. Please do some research if you have any concerns about doing this to your device .
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, i will tell that you have done all the changes , and took the risk.
I am happy to present you an more better EUI 5.9.21S experience for the Le Max 3 ( X850 ) .
Things changed and improved :
-> Launcher now support drawer mode ( ported from 28S)
-> Latest Super Manager , with data usage notification ( also from 28S)
-> Removed many useless applications
-> Improved system audio
-> The quiet sound in headphones is now fixed
Tip: Turn off Dolby Atmos , the speaker, earpiece, and headphones will be way louder .
-> Kernel Tweaks and battery optimization scrips
( In future : maybe i will be able to unlock the lens blur processing for current date )
If you encount an bug , please tell me the details in this thread .
Download : https://drive.google.com/open?id=1tCsHaJK1MmHzuQUJQSv4mltBFA_L7M5w
** The " R(Number) " means the release number of the ROM , like R1 - first release
How to install :
1. You need to have the bootloader unlocked , and the TWRP installed . ( How to do that ( my post link) : https://forum.xda-developers.com/showpost.php?p=76620374&postcount=7 )
**After unlocking the bootloader , you can get an green notification led and the phone not turning on , when you try to boot your phone .
[ THE SOLUTION IS : To boot into TWRP ( volume up and power button ) and from TWRP , tap on Reboot --> System , this will boot the phone normally , currently we can do nothing to solve this :crying: ]
Note : If you come from another ROM , you will need to do an wipe on system , data , cache .
Also please take an backup , if you want to restore back
2. Download the 21S Firmware & Modem by @moto999999 : https://androidfilehost.com/?fid=674106145207488760
3. Download and copy the ROM , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. After that you can root
***Suggest to root with Magisk ( is way better that SuperSU , and you will can use Snapchat , and will can hide the root )
Apps that I recommend : ( they are not in the ROM)
1. Material Notification Shade Pro ( adds an new notification bar , toggles , android P , O , N style )
**Tip : Select USA region for showing apps in status bar , not an 3 dot circle
2. Add Away ( Removes adds system-wide)
3. Install button Unlocker ( Allows you to bypass the restriction "screen overlay detected" and allow the permison to apps )
4. AndroiTS GPS Test Pro ( for GPS to indentify you faster , first time after instaling the ROM )
Credits to @moto999999 for :
- Initial release
- Tweaks to the kernel and battery
Credits for rest of the work goes to me @diamantik
Click to expand...
Click to collapse
Diamantik I try to insstall Your ROM but ask me about password.... it is possibile ?
[email protected] said:
Diamantik I try to insstall Your ROM but ask me about password.... it is possibile ?
Click to expand...
Click to collapse
You have boot into TWRP , and there is written " Data Encrypted " ?
If yes then skip , and go in TWRP :
--> Tick "do not show again" and the swipe to allow modification. ( if promting )
--> Skip device encryption by clicking "Install" (if the storage size is 0mb or no folder is showing while trying to install, then the device is encrypted. )
--> For solve that, click "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage (that's the purpose of device encryption, to prevent unauthorized access to the storage).
--> When completed, go back, click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. Reboot into recovery, not system).
---> From recovery, click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9 , after that you can root , suggest with Magisk
Keep in mind , you are doing all at your own risk !!!
I am not resposible if you get a brick , or lose your data :angel:
For more cleary Your ROM is now instaled by .zip file Used TWRP. If I try normal start phone, system Ask me about password. Watch this on My YT Channel:
https://youtu.be/1FIxZhyJ7jo
[email protected] said:
For more cleary Your ROM is now instaled by .zip file Used TWRP. If I try normal start phone, system Ask me about password. Watch this on My YT Channel:
https://youtu.be/1FIxZhyJ7jo
Click to expand...
Click to collapse
I understood
For removing password
--> Boot into TWRP
--> If prompts " device encryption " , tap on "Install"
(if the storage size is 0mb or no folder is showing while trying to install, then the device is encrypted. )
--> Go back in standart TWRP menu , from there click "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage (that's the purpose of device encryption, to prevent unauthorized access to the storage).
--> When completed, go back, click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. Reboot into recovery, not system).
---> Now after TWRP rebooted , click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9 , after that you can root , suggest with Magisk .
The password will be removed , is from encrypted data partition
OK. I Have Your ROM
HOW I install your ROM ?
1. enter TWRP mode
2. Wipe all
3. Format
4. Copy Your .zip file into root directory on phone
5. Install your .zip file (without unpacking the zip file)
6. after install -> wipe dalvik cache
7. Reboot -> system
8. Phone start your ROM and standard welcome setings.
That's all -> without this procedure ->click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9
Did I do wrong?
[email protected] said:
OK. I Have Your ROM
HOW I install your ROM ?
1. enter TWRP mode
2. Wipe all
3. Format
4. Copy Your .zip file into root directory on phone
5. Install your .zip file (without unpacking the zip file)
6. after install -> wipe dalvik cache
7. Reboot -> system
8. Phone start your ROM and standard welcome setings.
That's all -> without this procedure ->click "Install" > and select first the " EUI5.9 firmware and modem " and flash it , after that flash my EUI5.9
Did I do wrong?
Click to expand...
Click to collapse
1. (If prompts " device encryption " , tap on "Install"
1.1 Go home ,after that to "Wipe" --> choose to " Format Data " and type " yes " and swipe to format . It's going to wipe EVERYTHING in the internal storage , an unencrypt your storage . after that click "Reboot" --> "Recovery" , this will restart your recovery (very important, do not reboot the phone into system otherwise you'll start all over. )
1.2 Now after TWRP rebooted :
Copy the ROM , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. After that you can root
***Suggest to root with Magisk
Do some research on youtube if still don't understanding
diamantik said:
1.2 Now after TWRP rebooted :
Copy the ROM , and 21S_Firmware_&_Modem_x10.zip inside your internal memory
4. Flash the 21S_Firmware_&_Modem_x10.zip
5. Flash the ROM
6. After that you can root
Click to expand...
Click to collapse
Rom has been installed correctly Everything works great, especially the sound
I installed everything according to your instructions.
Unfortunately, the phone still does not work in LTE B20 mode. On the second phone LTE B20 works without a problem. I can easily check this because in my area LTE is only using B20
Maybe there is another version of the 21S_Firmware _ & _ Modem_x10.zip which supports B20?
[email protected] said:
Rom has been installed correctly Everything works great, especially the sound
I installed everything according to your instructions.
Unfortunately, the phone still does not work in LTE B20 mode. On the second phone LTE B20 works without a problem. I can easily check this because in my area LTE is only using B20
Maybe there is another version of the 21S_Firmware _ & _ Modem_x10.zip which supports B20?
Click to expand...
Click to collapse
Flash this x10_AOSP.zip modem : https://drive.google.com/file/d/14k-JYlJ0If6TFC5WjAbkC4h94GPcVIuu/view
Maybe this will fix the problem .
If not , i will not can help , maybe ask @moto999999
Also if with the new firmware , the rom make troubles , flash again the 21S_Firmware _ & _ Modem_x10.zip .
I have not tried this firmware
diamantik said:
Flash this x10_AOSP.zip modem : https://drive.google.com/file/d/14k-JYlJ0If6TFC5WjAbkC4h94GPcVIuu/view
Maybe this will fix the problem .
If not , i will not can help , maybe ask @moto999999
Also if with the new firmware , the rom make troubles , flash again the 21S_Firmware _ & _ Modem_x10.zip .
I have not tried this firmware
Click to expand...
Click to collapse
without success , the phone still can not see LTE B20
[email protected] said:
without success , the phone still can not see LTE B20
Click to expand...
Click to collapse
Well i don't have other modem.
Try with the EUI6 modem
Do you know if that's ok with your rom if I'll freeze apps from ant07 list here ?
some screenshots please!!!!!!!
diamantik said:
Well i don't have other modem.
Try with the EUI6 modem
Click to expand...
Click to collapse
I cannot download any app from the play store over mobile network. I mean it doesn't allow me to download and install or update anything from the google store. The system is waiting for WiFi. I'm I doing something wrong?
Bootloader is unlocked, TWRP installed, flashed your rom according to your instruction. No settings were changed yet. Google store settings checked for ability to download over any network. Any suggestions?
Plastic8 said:
I cannot download any app from the play store over mobile network. I mean it doesn't allow me to download and install or update anything from the google store. The system is waiting for WiFi. I'm I doing something wrong?
Bootloader is unlocked, TWRP installed, flashed your rom according to your instruction. No settings were changed yet. Google store settings checked for ability to download over any network. Any suggestions?
Click to expand...
Click to collapse
Firstly , yes you can freeze the apps what you find in ROM .
You can Freeze this apps :
LeEco account
LeEco setup wizard
MyLeEco
LeTVEcoProvider
ANT HAL Service
Fido ( all 3 apps )
VCalendar
Market Feedback Agent,
Following Feed
Fast Transfer
Effect Service
Crash Handler
EuiTransfer.AppData
Bubbles
and AOSP keyboard , if you have Gboard , or another keyboard .
You don't need necessarily to freeze the apps , just make sure that you have the " Deep sleep tuner " flashed .
From my experince there is not a difference with the apps freezed or not . Maybe about 10 minutes of battery life more .
That is why i have not put an list before :laugh: . Also this list isn't interfering with any apps , or android UI from my experince . The ROM was debloated as much as i was able.
The second problem solution :
Open app " Downloads " --> 3 dot ( right up corner ) --> Settings --> Scroll up , until " No limit " , appears .
Select , and done , now clear cache for play store , and this is all , this should remove this inability