My phone is currently hardbricked well I think so. The phone won't turn on no matter what I do(tried Odin and such) and it doesn't appear to charge. Only qualcomm hs-usb qdloader 9008 is my lead. I tried using debrick.img to no avail. Possibly because the sdcard I used was 16gb class 10. Another possibility is that I am using the wrong debrick.img so can anybody share the img(most I found was dead links). I also found out about using QFIL but I had no way to get (none that I know of) the prog_emmc_firehose_89xx.mbn file and rawprogram. I am unsure of the original OS but I flashed stock firmware with android 5.0.
As much help is very much appreciated thanks.
Did your Note 3 be unbricked? If not, did you try QPST EMMC Software Tool for unbrick. If necessary, I can provide the files, MPRG8974.hex and 8974_msimage.mbn for trial.
t2060079 said:
Did your Note 3 be unbricked? If not, did you try QPST EMMC Software Tool for unbrick. If necessary, I can provide the files, MPRG8974.hex and 8974_msimage.mbn for trial.
Click to expand...
Click to collapse
I'm really sorry for the late reply. I already gave up on it because of this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- imgur(.com)/a/QOE7n
but if you have any idea that could help that doesn't involve buying stuff it would be greatly appreciated.
No need to buy anything. I did not try this approach. Only learned this method for MSM8974 phone.
t2060079 said:
No need to buy anything. I did not try this approach. Only learned this method for MSM8974 phone.
Click to expand...
Click to collapse
A bit late reply again but have you seen the image attached to my reply? If you think it is still possible then can you send the files that you said or where to get it and some guides on the procedure if you can. I have no knowledge of this method yet so as much help is appreciated. Even though I got a new phone, having my Note 3 revive would still be a really wonderful. Thank you anyways
http://pan.baidu.com/s/1kT07Ttl
The above link contains all the required information such as working guide and MSM8974 related files, etc. Please try to download it but the working guide was Chinese guide. This package is for unbricking another phone with same CPU. If necessary, I can try to translate it to English.
Please be reminded that I did not try this method and cannot ensure it working for note 3. If you proceed with it, please advise your steps and result which I would know.
t2060079 said:
http://pan.baidu.com/s/1kT07Ttl
The above link contains all the required information such as working guide and MSM8974 related files, etc. Please try to download it but the working guide was Chinese guide. This package is for unbricking another phone with same CPU. If necessary, I can try to translate it to English.
Please be reminded that I did not try this method and cannot ensure it working for note 3. If you proceed with it, please advise your steps and result which I would know.
Click to expand...
Click to collapse
Translation would be nice as the page does not offer it. The download links are great. Lol old for me but still usefully. But those I do not believe will work on a note 3 as the imgs are for another device. Please post this in English if I am wrong.
Of course, not whole these image components can suit Note 3. The idea is to flash 8974 related files and try to make the phone with response for flashing other Note 3 image components from Note 3 ROM.
I will try to translate the working guide to English for reference soon.
Working guide is translated and accessed here.
https://www.dropbox.com/s/apy130smiy1uv7v/Working%20Guide%20%E6%95%99%E7%A8%8B.pdf?dl=0
Removed.
Related
Greetings,,,
NEW METHOD USING CF-ROOT:
Click to expand...
Click to collapse
I made a small video guide for those who did not know how to follow chainfire's method
NOTE: I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THIS METHOD,, YOU TAKE THE FULL RESPONSIBILITY...
This Method is for Galaxy S III i9300 running XX NEE ALE8 firmware
Credits go for Chainfire for providing the Galaxy S3 Root
Android SDK
Thread and Downloads
Galaxy S III Drivers for those who don't have it
How to enter Download Mode:
Switch OFF the Phone
Hold the Volume Down Button + Home Button + Power Button
Then press volume up
Enjoy,,
thx buddy
Didnt have the beast actually, waiting to have it soon. nice tutorial man
For those who are not sure about the firmware required for this method,, here you go:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sureley there has to be a easier way to root. jeez man. this is a long ting
10076757 said:
sureley there has to be a easier way to root. jeez man. this is a long ting
Click to expand...
Click to collapse
yeah agreed mate, although i remember when the SGSII first came out it was similar to this but after a week or two it was must easier to root the phone.
Thanks for the tutorial! Everything is going great so far.
1 thing while installing suser i can't get right is this:
Maybe i'm writing in the wrong command or i have a misspelling somewhere?
Would you mind writing all the commands here at the forum's?
Thanks
Its "|" not ":"
Ahh! ;-) Not it worked like a charm!
My S3 is rooted and ready to go!
PS: CWM is still not avaiable for S3 right?
arifagic said:
Ahh! ;-) Not it worked like a charm!
My S3 is rooted and ready to go!
PS: CWM is still not avaiable for S3 right?
Click to expand...
Click to collapse
Here's the CWM that indie recommends for his ROM
http://forum.xda-developers.com/showpost.php?p=26563834&postcount=118
Hi, having a problem here where it doesn't recognise the word "find" any ideas?
StillTheWatcher said:
View attachment 1095386
Hi, having a problem here where it doesn't recognise the word "find" any ideas?
Click to expand...
Click to collapse
Just skip this
hi guys on the s3 my csc is btu is that a uk csc?
Added CF-ROOT Method !
Please help...
Hello, first of all, i would like to say thank you so much for your noob proof guide on rooting SGS3. I successfully rooted my SGS3 by following your method (and i am a noob haha).
But, i have a problem now, my phone keep reminding me to update my firmware, and i couldn't do it. From what i read, its because my phone is rooted.
So, now i want to un-root my phone, but i am so confuse because so much info out there. I try to read it over and over but i still not understand (i am a noob).
So, i need your help to guide me to unroot my phone. I am not using the CF-Root, i am using the first method you posted on this thread.
Please help me... i dont know what to do. :crying:
Thank you so much for your help, i really appreciate it
Unlock Bootloader
for Lenovo K910 DUAL SIM Android 4.4.x
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I won't held any responsability if anything goes wrong!
Download the patch through here
Unzip it
Connect your phone to PC with USB Debug Mode ON
Run stack.bat file
It works perfect! Thanks for this, Crowds! You're the best!
I've a friend bought K910 after my advice.
I was trying to update his software. I used TWRP batch file to install it. It rebooted the phone and bat command screen shows it's waiting for device. Now the phone is stucked on lenovo logo I cann't open system or recovery mode.
I need advices!!!!!!
agsao said:
I've a friend bought K910 after my advice.
I was trying to update his software. I used TWRP batch file to install it. It rebooted the phone and bat command screen shows it's waiting for device. Now the phone is stucked on lenovo logo I cann't open system or recovery mode.
I need advices!!!!!!
Click to expand...
Click to collapse
Hi my friend
You should report that on the correct thread
Either way, you should enter in download mode and use qpst to get it done. You're PC should recognize it as 9006 so you're able to go from 9th step forward witch is quite simple
Dear friend,,, Thanks for your response
I feel hopeful when I see your reply.
Sorry I don't know what is the suitable thread for my problem! I thought it's a problem with my bootloader.
Kindly, Could you explain "9th step for what?" provide me with any link for those steps
agsao said:
Dear friend,,, Thanks for your response
I feel hopeful when I see your reply.
Sorry I don't know what is the suitable thread for my problem! I thought it's a problem with my bootloader.
Kindly, Could you explain "9th step for what?" provide me with any link for those steps
Click to expand...
Click to collapse
My qpst thread. Check my signature
Worked with the latest DEV ROM?
AyieStyx said:
Worked with the latest DEV ROM?
Click to expand...
Click to collapse
Work with any 4.4.x version
has anyone tried this on k910L (single sim) on 4.4.x ..?
Anyone konw the method to restore it?
if your device doesn't turn on. your device is hard bricked you need 'blank flash files' to flash the bootloader again.. I don't think Motorola has released those files for moto x play yet.
Plis, one picture o scren
talk a little more, how did you get to put the team in that state
Enviado desde mi XT1563 mediante Tapatalk
I have same problem, my moto x play is hard bricked and gets only detected as qdloader Q9008. I am looking for the blank flash files, something like prog_emmc_firehose_8939.mbn
if need help write me WhatsApp/Viber/Telegramm
+7-913-22-11-777
我日你打夜 said:
Anyone konw the method to restore it?
Click to expand...
Click to collapse
If you describe what you did to get there, you may help others not to make the same error at least!
usually a downgrade fw and OTA
I have same problem any other solution ?
how this happend??
It's complicated if there's no more information on how you got there.
Enviado desde mi XT1562 mediante Tapatalk
Did you try using rsdlite ? If it gets detected then you are saved
我日你打夜 said:
Anyone konw the method to restore it?
Click to expand...
Click to collapse
Yes
CrashXXL said:
if need help write me WhatsApp/Viber/Telegramm
+7-913-22-11-777
Click to expand...
Click to collapse
Hello!
I have moto xt1556 in hardbrick.
Do you have files to QFIL unbrick ?
Can you helpme please?
Thanks
maspao said:
I have same problem, my moto x play is hard bricked and gets only detected as qdloader Q9008. I am looking for the blank flash files, something like prog_emmc_firehose_8939.mbn
Click to expand...
Click to collapse
Hi!
I have moto g 3 TE in hardbrick too.
MSM8939.
Do you get blankflash files or prog_emmc_firehose_8939.mbn for QFIL?
dengupeye said:
Hi!
I have moto g 3 TE in hardbrick too.
MSM8939.
Do you get blankflash files or prog_emmc_firehose_8939.mbn for QFIL?
Click to expand...
Click to collapse
I'm in the same situation as you.
I've found the prog_emmc_firehose_8939.mbn here on XDA in another phone thread (https://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040), but the blankflash image for our phone still missing. If you get any success please tell me!
I uploaded the file i found here https://drive.google.com/file/d/0BzL4kz3FPLIJdFA1STVBU0FvNms/view?usp=sharing
caiosilva96 said:
I'm in the same situation as you.
I've found the prog_emmc_firehose_8939.mbn here on XDA in another phone thread (https://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040), but the blankflash image for our phone still missing. If you get any success please tell me!
I uploaded the file i found here https://drive.google.com/file/d/0BzL4kz3FPLIJdFA1STVBU0FvNms/view?usp=sharing
Click to expand...
Click to collapse
File is 8936 not 8939.
"If you get any success please tell me!" Ok
dengupeye said:
File is 8936 not 8939.
"If you get any success please tell me!" Ok
Click to expand...
Click to collapse
Sorry, I didn't realize the mistake in the last number. ?
Edit:
Apparently they use this 8936 file to flash the yu yureka, which uses a 8939 processor too. Please take a look at the thread I mentioned. We can try with this file
Unfortunately, I have the same issue. Black screen, only QDLoader 9008 mode.
I tried to use these 8936 files with no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
991 SAHARA_NAK_INVALID_CMD error
Could anybody please let us know if there are other ways to bring these phones to life?
Would any JTAG device work with XT1562?
Do professional service have different methods? Or they would just replace mainboard?
Thanks
I found prog_emmc_firehose_8939_asus.mbn file but there are no dedicated rawprogram0.xml & patch0.xml.
With other XML files, it doesn't work as well. The same error.
I have heard that NSA can turn on my phone remotely. Not sure if they deal with bricked phones. Should I ask them?
Hi guys extremely excited to release this, as I was working hard on it. Now its time for you to make worth of it
I (KP) takes no responsibility for any fault or damage caused by using the MTK Tools. No warranties of any kind are given. Use at your Own Risk
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS THIS BASICALLY
This na guys,,,, this is a software guys.... LOL! Read Features You will get all the things, if then too not.... Then this is not right place for you ... (KIDDDING)
WHAT CAN YOU MAKE OUT FROM THIS
With This Tool you can easily able to hack into your phone with not an only ease process but also a simple gui interface tool for your phone. Give a try. If you like you can freely donate my work, so that i could make this site a an independent domain
FEATURES :laugh:
Check from here :fingers-crossed: lol..
TIPS TO USE IT :laugh:
1. Make sure while using any option move your cursor onto it, to display its information.
2. If toolkit suddenly doesn't respond, make sure you first End its process from task manager then contact me from the toolkit - that why this happen (log)
3. Do not jump onto the options quickly, wait till the first process gets over.
4. That's it, ENJOY
Please install the ToolKit to the root folder on your PC if possible.
For example C:\MTK-Tools or D:\MTK-Tools
If you install it to a folder with brackets or special characters in the filename such as C:\Program Files (x86)\ then it may cause certain processes in the ToolKit to fail.
If you already have the Toolkit installed and want to update it, just open MTK Tools.exe and then Select Help tab to check for updates. If updates are available it will be automatically downloaded.
There have been reports of the Toolkit not working properly if the User Account name is very long or contains special characters so be aware if you have problems.
SCREENSHOTS ::
All Views And Downloads HERE
HIT THANKS ,, AND DONATE ,, WOULD BE APPRECIATED HERE :angel:
Great Work done bro, it would be of much help and time limiting to/for the noons..
Well-done bro.
iykeDROID™ said:
Great Work done bro, it would be of much help and time limiting to/for the noons..
Well-done bro.
Click to expand...
Click to collapse
Thanks bro...
i have a dacia car and the canbus couldn't work in my device as the specs as this picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but a friend has the same car with this specs it worked very well with him
can i download this frimware to my device and make it work ?
and kindly show how to make it thanks alot
any help
hi, do you have any chance to make a full software dump of Your friend device and upload this ? i have YT9216CJ but when i try to root this i flashed wrong files and now i bricked my device.
szefuncio2015 said:
hi, do you have any chance to make a full software dump of Your friend device and upload this ? i have YT9216CJ but when i try to root this i flashed wrong files and now i bricked my device.
Click to expand...
Click to collapse
unfortunately no as he is not in same my country
i'm also afraid from this brick too
to be honest with you leave it as is, i have some previous experience with root but as i said, now i have bricked device and i trying to repair this from few days without success...
szefuncio2015 said:
to be honest with you leave it as is, i have some previous experience with root but as i said, now i have bricked device and i trying to repair this from few days without success...
Click to expand...
Click to collapse
this is the problem there is a lot of firmware for this device with a lot of names and codes
yes, its a lot of firmwares and devices, i think i need to buy new device because i no see light in a tunnel to repair this what i bricked i tried to ask for firmware and support on 4pda.ru forum but also without success.
but i wish you good luck
szefuncio2015 said:
buy new device because i no see light in a tunnel to repair this what i bricked i tried
Click to expand...
Click to collapse
thanks a lot and i hope you find a solution to solve your device
szefuncio2015 said:
to be honest with you leave it as is, i have some previous experience with root but as i said, now i have bricked device and i trying to repair this from few days without success...
Click to expand...
Click to collapse
did you tried this
hi [B]Mohie.soheim[/B], yes i saw that, but it's also not working for me, now i have second device, but i will try to rescue my old radio, maybe someday it will be alive
i tried to get help on 4pda.ru forum, but one guy said i using translator so and i'm idiot because i do not speak Russian Language
thanks for your help