Related
Hi everyone,
tonight I was trying to install the Stagefright OTA using this guide: http://forum.xda-developers.com/moto-x/general/xt1053-222-27-5-stagefright-ota-update-t3210786
The only thing I got was an android with a red triangle on it. So I went back, did a total phone reset, reinstalled the TWRP (fastboot flash twrp.img) and restored my backup. Sadly, the phone keeps rebooting to the TWRP as if there's nothing on it except the TWRP.
I've got the eu model and I can't find any factory image (or image in general) to flash on the device.
EDIT:
I manage to get something to work by simply boot via the "BT Tools" fastboot menu voice.
I don't exactly know why, but this way I manage to boot on a clean Android install and then restore my TWRP backup.
There's just a little problem: if I boot normally the system goes straight to the TWRP and won't boot.
I always need to go in the fastboot menu and select "BT Tools".
i was going through a similar reboot process last night. I realized that my issue was that I had xposed installed and had to uninstall it. however, I realized that after I wiped internal storage.
thus, my solution was to wipe everything (cache, dalvik, data, & internal storage), then mfastboot the stock ROM, then flash TWRP, then restore nandroid.
however, make sure to copy your nandroid to your computer first - you can transfer it back to the phone after flashing TWRP. you may have to perform a small nandroid via TWRP just to setup the right folder names, but you can still transfer the nandroid folder to your phone while the phone is in recovery.
hope this helps.
jco23 said:
i was going through a similar reboot process last night. I realized that my issue was that I had xposed installed and had to uninstall it. however, I realized that after I wiped internal storage.
thus, my solution was to wipe everything (cache, dalvik, data, & internal storage), then mfastboot the stock ROM, then flash TWRP, then restore nandroid.
however, make sure to copy your nandroid to your computer first - you can transfer it back to the phone after flashing TWRP. you may have to perform a small nandroid via TWRP just to setup the right folder names, but you can still transfer the nandroid folder to your phone while the phone is in recovery.
hope this helps.
Click to expand...
Click to collapse
First of all, thanks for your reply.
I manage to get something to work by simply boot via the "BT Tools" fastboot menu voice.
I don't exactly know why, but this way I manage to boot on a clean Android install and then restore my TWRP backup.
There's just a little problem: if I boot normally the system goes straight to the TWRP and won't boot.
I always need to go in the fastboot menu and select "BT Tools".
Any hint on why this is happening?
edmael said:
First of all, thanks for your reply.
I manage to get something to work by simply boot via the "BT Tools" fastboot menu voice.
I don't exactly know why, but this way I manage to boot on a clean Android install and then restore my TWRP backup.
There's just a little problem: if I boot normally the system goes straight to the TWRP and won't boot.
I always need to go in the fastboot menu and select "BT Tools".
Any hint on why this is happening?
Click to expand...
Click to collapse
you could be missing this line: mfastboot getvar max-download-size
I used the guide here: http://forum.xda-developers.com/moto-x/general/xt1060-lollipop-5-1-ota-fxz-thread-t3139519
granted, you appear to have a different model than mine, but the process should be the same.
jco23 said:
you could be missing this line: mfastboot getvar max-download-size
I used the guide here: http://forum.xda-developers.com/moto-x/general/xt1060-lollipop-5-1-ota-fxz-thread-t3139519
granted, you appear to have a different model than mine, but the process should be the same.
Click to expand...
Click to collapse
Yes, I skipped that line and removed it from the .xml of the images I flashed because I found some guides that suggested it.
Now I'm really tempted to re-flash everything using that command first.
edmael said:
Yes, I skipped that line and removed it from the .xml of the images I flashed because I found some guides that suggested it.
Now I'm really tempted to re-flash everything using that command first.
Click to expand...
Click to collapse
All removing that line does is prevent the system partition from error-ing out during the flashing process, which is why it's suggested to remove the line if you are using RSD-Lite to flash an image
mastarifla said:
All removing that line does is prevent the system partition from error-ing out during the flashing process, which is why it's suggested to remove the line if you are using RSD-Lite to flash an image
Click to expand...
Click to collapse
I flashed it using the -P option so I guess it's just the same as using that line, right?
Also: the removal of that line was not only in your guide so I immediatly deleted it
edmael said:
I flashed it using the -P option so I guess it's just the same as using that line, right?
Also: the removal of that line was not only in your guide so I immediatly deleted it
Click to expand...
Click to collapse
Flashing with mfastboot with the -P option is the same, you can verify the option exists by just typing in mfastboot in the command line, it will show you all the commands and what they do
I didn't want to have people dependent on using RSD-Lite (or any particular program) to flash the System Image, as it then makes a Windows machine the only thing possible to flash this image plus it uses Internal Moto Only software (legal issues), so I tried to find a better way to make mfastboot work properly for all types of computers
another thing I have noticed is that my phone kept getting stuck on the boot image screen (failed to proceed to the boot animation screen). to resolve this, I made sure to flash SU via TWRP after flashing my ROM via TWRP (or restoring a nandroid).
mastarifla said:
Flashing with mfastboot with the -P option is the same, you can verify the option exists by just typing in mfastboot in the command line, it will show you all the commands and what they do
I didn't want to have people dependent on using RSD-Lite (or any particular program) to flash the System Image, as it then makes a Windows machine the only thing possible to flash this image plus it uses Internal Moto Only software (legal issues), so I tried to find a better way to make mfastboot work properly for all types of computers
Click to expand...
Click to collapse
I really appreciated that (proud Linux User here), I tried mfastboot on Linux and even RSD-Lite on my Windows machine, but both of them failed to get my phone working with the files you provided in the other thread.
Now I'm stuck with this problem: every boot I need to select BT Tools and wait some minutes for my phone to boot.
I still don't get why it only boot in TWRP and I still don't get how to fix this
edmael said:
I really appreciated that (proud Linux User here), I tried mfastboot on Linux and even RSD-Lite on my Windows machine, but both of them failed to get my phone working with the files you provided in the other thread.
Now I'm stuck with this problem: every boot I need to select BT Tools and wait some minutes for my phone to boot.
I still don't get why it only boot in TWRP and I still don't get how to fix this
Click to expand...
Click to collapse
you may need to wipe internal storage and mfastboot everything from scratch...
jco23 said:
you may need to wipe internal storage and mfastboot everything from scratch...
Click to expand...
Click to collapse
Already did that (the first time I didn't even tried booting with BT Tools, but the effects were the same), but nothing new happened.
edmael said:
I really appreciated that (proud Linux User here), I tried mfastboot on Linux and even RSD-Lite on my Windows machine, but both of them failed to get my phone working with the files you provided in the other thread.
Now I'm stuck with this problem: every boot I need to select BT Tools and wait some minutes for my phone to boot.
I still don't get why it only boot in TWRP and I still don't get how to fix this
Click to expand...
Click to collapse
Have you tried flashing the TWRP System Backup that I provided? It may fix the issue that you are seeing currently
mastarifla said:
Have you tried flashing the TWRP System Backup that I provided? It may fix the issue that you are seeing currently
Click to expand...
Click to collapse
Yes, tried, but nothing happens (except that it boots when I go into BT Tools).
I think there's something wrong with my partition scheme because it always go straight to TWRP.
If I were on a GNU/Linux distro I'd check the grub config because it seems it boot from the wrong partition, but on Android I don't know if/how that's possible.
does it boot up when you flash the stock recovery? perhaps you may need to let it boot up first before installing TWRP?
did you happend to type "mfastboot flash boot twrp.img"? that could be the issue, as the command should be "mfastboot flash recovery twrp.img, right?
sorry I can't be more helpful, as I'm sure this is frustrating for you. just trying to grasp at straws here....
jco23 said:
does it boot up when you flash the stock recovery? perhaps you may need to let it boot up first before installing TWRP?
sorry I can't be more helpful, as I'm sure this is frustrating for you. just trying to grasp at straws here....
Click to expand...
Click to collapse
Don't be sorry, you're helping me!
Also: I'm not much frustrated since I have a working phone right now, I just need do avoid rebooting it
I tried to flash the stock recovery (found here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628, used this: XT1052_GHOST_RETEU_5.1_LPA23.12-15_cid7_CFC.xml.zip) but if I'm not wrong (did that yesterday in the late night) it just booted to the Android with the red triangle on it (so, no booting for me).
EDIT:
No, I don't think I did that. But let's suppose I did, how can I revert it?
Also: is there a way to see my partition scheme so I'm sure everything's fine?
edmael said:
Don't be sorry, you're helping me!
EDIT:
No, I don't think I did that. But let's suppose I did, how can I revert it?
Also: is there a way to see my partition scheme so I'm sure everything's fine?
Click to expand...
Click to collapse
You can revert it by taking the boot.img from the 5.1 zip and flashing that using the command...
mfastboot flash boot boot.img
The partitioning you are mentioning is probably the gpt.bin, but that is typically done near the very beginning of the flashing process
here's what I would do:
boot into recovery
connect phone to PC, copy your nandroid and any other files from the SDcard to your PC
within recovery, wipe cache/dalvik/data/internal storage
reboot to bootloader
run the mfastboot commands as shown (but use the getvar-download....) in place of editing the xml zip file
after running the mfastboot commands, let the phone boot up to stock and establish itself
reboot to bootloader and flash TWRP
again, just a suggestion on what I would do - seems like @mastarifla is a great resource and is more knowledgeable than me, so maybe you'll get some confirmation.
good luck!
Ok, I still haven't solved this issue.
I tried with re-flashing everything, but I still get the problem.
I think it's a problem with the partition scheme because even by flashing just partition gpt.bin and motoboot.img when I launch reboot-bootloader it reboot the phone into TWRP.
I think the TWRP is in the wrong partition and/or I've got a wrong partition scheme, but I don't know how to check it or how to fix it.
edmael said:
Ok, I still haven't solved this issue.
I tried with re-flashing everything, but I still get the problem.
I think it's a problem with the partition scheme because even by flashing just partition gpt.bin and motoboot.img when I launch reboot-bootloader it reboot the phone into TWRP.
I think the TWRP is in the wrong partition and/or I've got a wrong partition scheme, but I don't know how to check it or how to fix it.
Click to expand...
Click to collapse
So your phone thinks that the bootloader is your recovery?
That is actually pretty strange, you could take a look at the Linux kernel on Motorola's GitHub and see if it has any info on the partitioning structure or what happens when a reboot-bootloader command is sent to the phone
It sounds as if the recovery and the bootloader swapped places, as the fastboot menu is considered a part of the bootloader, and if you are not seeing that on the hardware key bootup, then there is something definitely wrong, if you do reboot-recovery does it take you to the bootloader/fastboot menu?
Hi,
I made this post/thread because i couldn't find a solution to my problem through this forum and google.
Here is my trouble:
I was trying to install a twrp recovery and was following the instructions of a tutorial.
-So first i installed flashify and proceeded to a back up of the current kernel and current recovery
-Then downloaded a custom recovery image through TWRP release for my nexus 4
-After this i accidentally flashed the recovery image to boot instead of recovery
Now as you can guess the trouble is that my phone only boots to TWRP recovery instead of usual boot.
I tried to find aswers on this forum and google and yet i didn't find a solution.
I tried this post but without results:
http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
I would be grateful for any help and wish to recover this mistake without using a factory reset if possible.
Thank you, as you can see i am pretty new to this environment.
Can you get into fastboot mode? If yes, try flashing a stock Google rom and perform a factory wipe after installing the stock rom.
audit13 said:
Can you get into fastboot mode? If yes, try flashing a stock Google rom and perform a factory wipe after installing the stock rom.
Click to expand...
Click to collapse
Thank you for your answer, yes i can get into fastboost mode. As i am pretty new can you explain me how i can flash the stock Google rom (i guess it is the factory rom provided ?). Will this operation erase my data on the phone ?
Boot into fastboot and flash boot.img and recovery.img file from stock rom. Make sure you use the stock rom that matches the rom currently installed on your phone.
Ilovkos said:
Thank you for your answer, yes i can get into fastboost mode. As i am pretty new can you explain me how i can flash the stock Google rom (i guess it is the factory rom provided ?). Will this operation erase my data on the phone ?
Click to expand...
Click to collapse
Once in fastboot, extract the downloaded zip you got from Google. There you will find flash-all.bat Execute it as admin and wait. If it doesn't work, then extract the zip within the first zip and you should get loads of .img files. You will manually have to flash them. The commands are a bit different for each partition. They go like this:
Code:
fastboot flash system system.img
fastboot flash recovery recovery. img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash data userdata.img
Note that if your cmd/terminal isn't open from the directory where the files are you will have to input it's location, for example
Code:
fastboot flash recovery C:\Users\YOURUSER\Desktop\recovery.img
Also note that there must be no spaces neither in the file name or the directories where the file is located, otherwise it probably won't flash.
Also yes, doing this will completely revert you to stock, and you WILL loose all your data. You could try just reflashing recovery.img and then flashing TWRP over it. If you can get to TWRP after this, then connect the USB cable to your PC and transfer all the data you need, after which I recommend flashing to stock. You can root and/or flash custom ROMs after this.
However in your case I think you don't have to completely go back to stock. Just try flashing the proper boot and recovery images over fastboot like I explained above and try booting then.
nerotNS said:
Once in fastboot, extract the downloaded zip you got from Google. There you will find flash-all.bat Execute it as admin and wait. If it doesn't work, then extract the zip within the first zip and you should get loads of .img files. You will manually have to flash them. The commands are a bit different for each partition. They go like this:
Code:
fastboot flash system system.img
fastboot flash recovery recovery. img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash data userdata.img
Note that if your cmd/terminal isn't open from the directory where the files are you will have to input it's location, for example
Code:
fastboot flash recovery C:\Users\YOURUSER\Desktop\recovery.img
Also note that there must be no spaces neither in the file name or the directories where the file is located, otherwise it probably won't flash.
Also yes, doing this will completely revert you to stock, and you WILL loose all your data. You could try just reflashing recovery.img and then flashing TWRP over it. If you can get to TWRP after this, then connect the USB cable to your PC and transfer all the data you need, after which I recommend flashing to stock. You can root and/or flash custom ROMs after this.
However in your case I think you don't have to completely go back to stock. Just try flashing the proper boot and recovery images over fastboot like I explained above and try booting then.
Click to expand...
Click to collapse
Thanks to both of you I managed to fix this just by flashing the boot.img of the Google factory img. It didn't erase my data except my messages which is nice.
Hello guys,
I had my phone rooted with latest twrp. I flashed stock+ rom with Franco Kernel 25r and the A.R.I.S.E file for better sound. I've done the same set up minus the ARISE file and never had an issue.
well to my luck it kept bootlooping and I wasn't able to get back into my custom recovery. When I got home and got my hands on a pc I did a factory reset by manually flashing stock google img . I even used a couple tools since I ran out of ideas and still no luck.
I'm able to do anything through fastboot but I can't seem to get into my recovery at all.
Any ideas or tips of where I should go next?
Not a Hardbrick
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
leninmon said:
As long as you can get to the bootloader mode, you haven't hard bricked your device. Hardbricking is a point where you cant boot your device and in to bootloader so there is no way to flash your device to a useable state.
Now as you can boot to the bootloader, just fastboot boot twrp.img and if you have a factory image zip, copy it in your device internal storage and flash it. Its that simple, provided you are already using an unencrypted boot.img in your current setup. Or else the next step is to flash an decrypted boot.img(you will loose all your userdata and internal storage data.). There are ways to mount the the encrypted filesystem if you are using a pin or password combo with your fingerprint. But without it its a bit more trickier so just for ease and if you dont have any inseparable data in your device now just flash a decrypted boot.img and then you can easily mount your internal storage to your pc and copy the factory image and the rest you already know..
Click to expand...
Click to collapse
First of all thank you for the response.
I've tried flashing the most current twrp and it seems to go through fine on fast boot but when I actually try to get into recovery from the device it will boot loop and just keep doing that.
How can I get into the phones storage through fastboot?
Where can I get the factory zip?
it feels as if everything seems to go good through fastboot but when I actually try to boot the phone nothing seems to work.
Wiltron said:
At this point, I'd recommend a full reset.
Flash all the images in the latest Android M factory image (don't flash DP5 or similar N based ROMs): Recovery, Boot, System, Bootloader, Radio, everything.
Once you get stabilized and back into a working phone, then start rooting and messing around with kernels and what not.
To be completely honest, I've flashed nearly every ROM for the 6p, as well as my other Nexus devices, Galaxy phones, Sony phones, and no-name brands and none of those ultra modified kernels did any noticeable change. I tried the F2FS, NTFS, etc file system changes, tweaks to the governors and IO's, all of that, and found the stock kernel was the best. If a kernel with a different IO Scheduler worked even 10% better than the current implementation, and was just as stable, don't you think the Google/Android Engineers would've pushed that to live?
Currently running Pure Nexus July 23rd Update, everything stock that comes with it, Systemless Root/XPosed, and Viper4Android and have never had a performance or stability issue. I'd recommend you do the same.
Click to expand...
Click to collapse
Thanks for the reply.
I've done the manual flashing already and flashed everything single item the most current factory image. Everything seemed to have gone through okay but when I rebooted the phone it was back to 0.
I'm actually considering getting rid of the phone now since it is my daily =/
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
leninmon said:
Just get to bootloader mode and try booting the twrp.img
fastboot boot twrp.img
From the twrp ui, go to advanced wipe and format your storage.
To mount the internal storage on your PC, enable mtp from twrp screen.
If U are using a decrypted boot.img, it will easily mount ur internal storage. Or try flashing a decrypted boot.img
fastboot flash boot boot.img
Then try the above again..
Click to expand...
Click to collapse
I flashed the twrp.img and it went through successfully at least on the computer it did but when the phone actually tries to get into recovery (twrp) it will start to boot loop and keep on doing that. I tried both an encrypted and decrypted boot img but it still made no difference.
I'm really going crazy over this
Wiltron said:
Format each partition before flashing.
fastboot format <partition>
wait until it's done, then
fastboot flash <partition> <image>
Some partitions can't be formatted, which there are ways around, but try this first.
Click to expand...
Click to collapse
I just tried this and had no luck =/....the phone wont get past the google boot screen
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
leninmon said:
You need to explain more on what you actually tried here.
Just download the latest factory image and try to flash the latest bootloader using fastboot.
Then boot to the bootloader and try formating the device. Not wiping
Then you have to
fastboot boot twrp.img
I believe you have only tried wiping not formating. I faced similar issue before. But once I flashed a decrypted boot.img, it cleared the user data and then I was able to get to twrp.
Maybe your twrp img is corrupted if this didn't work.
Click to expand...
Click to collapse
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
edgarted said:
i just flashed the latest bootloader from the most recent factory image and i did the command format user data and then tried the fastboot boot twrp and the phone will then try to get into recovery, the google logo comes up lasts a couple seconds and boot loops all over to where is says my phone cant be check for corruption
By now i should have been able to get into recovery and it wont go through
Click to expand...
Click to collapse
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
i42o said:
download a factory image and run the flash all file...... it should reboot your phone after 5 minutes and the issue should be resolved.. a hard brick would be a device that does nothing.... in this case i believe that you just didnt do something right.
Click to expand...
Click to collapse
I was really really hoping this would help. I erase/formated everything before flashing anything. I then ran the flash-all file and it took a couple of minutes and it said finished on the command box and my phone restarted and went into the white google logo and rebooted again with a bootloop. I waited around 15 minutes hoping it would start but it didn't.
It honestly feels as if the phone is not processing the full commands but on the pc it seems to go through successfully
is there a way to force an install of a rom and see if maybe a dirty flash over the stock one will allow it to start up?
leninmon said:
Then download the latest factory image and extract it
fastboot flash radio.img
fastboot flash bootloader.img
& do a fastboot update the rest archive file as it is
This will flash the rom via fastboot& U don't have to rely on TWRP or CWM
Click to expand...
Click to collapse
i know how to flash the radio and bootloader but how do i do a fastboot update?
edgarted said:
i know how to flash the radio and bootloader but how do i do a fastboot update?
Click to expand...
Click to collapse
Just unzip the factory image and there U can see the flash shell script files too. Open them in a text editor & U could see the exact command. In a factory img, they also do the same thing via script files. Flashing the radio & bootloader & updating the rest archive
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
edgarted said:
so this is what I've done
I've manually flashed every file needed for the factory image from google.
I also tried wugfresh tool kit which is great but didn't help me much. I flashed stock recovery and treid to boot into to and nothing. I flashed a customer recovery and nothing.
It always does the same thing
the screen that says my phone can't be checked for corruption and then the google sign comes up stays on for a couple seconds and then it bootloops to the can't be checked for corruption.
I try to get into recovery using fastboot commands and the phone does the same exact thing.
I was even able to lock and relock the bootloader and I was able to successfully flash everything at least that is what it showed on the computer
so ive read almost every thread that had to do with bricking and I feel like an expert now but im starting to think it is done =/
Click to expand...
Click to collapse
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
blitzkriegger said:
Hey there. First off make sure to unlock again your bootloader. Then you may follow post # 10 of @Heisenberg 's flashing guide for our device.
First images to flash would be bootloader and radio. First flash bootloader, then make sure to issue the command adb reboot-bootloader. Then afterwards once the phone has rebooted back to bootloader, flash radio, then again do the adb reboot-bootloader again.
Once the phone is again back to bootloader flash the rest of the images except userdata. For the boot.img and recovery.img, flash the stock ones-don't use the decrypted boot.img and don't flash the twrp.img yet. Once all necessary images have been flashed issue the reboot-booloater command one more time, then on the bootloader screen choose the reboot option. Wait anywhere from 3-10 minutes for the phone to load. Let us know how it goes for you.
Click to expand...
Click to collapse
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
edgarted said:
Hello and thank you for helping.
I tried this method a couple of minutes ago. I flashed them this same way
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
It does the same exact thing it will try and restart the phone, the message that says it can't be checked for corruption the google logo comes up and it repeats it self non stop.
This is what doesn't make sense to me.
This is the file that I had flashed through twrp when it was working fine
Leviticus 1.3 - http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click to expand...
Click to collapse
This is weird. What version of the stock factory images did you flash? I've been using leviticus 1.3 since it came out and when i was still on stock rom. I switched over to cm builds and have been flashing every nightly since the 7/24th build, and in the process repeatesly reflashing the aound mod along, and i've had zero issues with the phone booting afterwards.
Hi,
Does a thorough guide exist on how to flash custom ROM on this phone?
I have done quite a lot of flashing in my life but can't a ROM flashed for the love of God.
Got TWRP installed, ADB works, cables are good.
Thanks!
After quite some hours I finally managed to get Havoc Pie running (GSI ARM64 AB, downloaded here).
My first problem was the fact that you need to be on stock Oreo before starting, this took me a while to figure out.
I used the most recent 'back to stock' Oreo from this page.
After installing this, I booted up, and went straight for enabling USB-debugging in Developer options.
Then do ADB REBOOT BOOTLOADER to enter fastboot mode.
There I erased system on both A and B partitions by using FASTBOOT ERASE SYSTEM command, then FASTBOOT SET_ACTIVE OTHER to switch to the other partition, and then once more FASTBOOT ERASE SYSTEM to also erase the system on this partition.
After that I ran FASTBOOT FLASH SYSTEM Havoc-OS-v2.0-20181027-GSI-ARM64-AB-Official.img, on the one partition, then FASTBOOT SET_ACTIVE OTHER and after that FASTBOOT FLASH SYSTEM Havoc-OS-v2.0-20181027-GSI-ARM64-AB-Official.img to flash it on the other partition.
After that I installed TWRP by running FASTBOOT FLASH BOOT twrp-3.2.3-0-mata.img (downloadable here).
After that, I rebooted into TWRP recovery by running ADB REBOOT RECOVERY.
There, I put twrp-installer-mata-3.2.3-0.zip (downloadable at the previously mentioned TWRP website) on internal memory and flashed it.
This automatically flashes both A and B partitions (switching between A and B at the reboot screen).
After doing that, I wiped /DATA on both A and B.
Then I put the Havoc-OS-v2.0-20181027-GSI-ARM64-AB-Official.img on internal memory and flashed it on /SYSTEM for both A and B.
Then it is time for GAPPS.
As I prefer Stock GAPPS with my own GAPPS-CONFIG.TXT, I ran into the Error 70: because of the large size of Havoc, there is not enough room for large GAPPS.
So because of that I needed to do the Resize /SYSTEM partition for both A and B (in the Advanced wipe menu section).
After that I was able to flash my Stock GAPPS on both A and B.
Now I need some rest to regain my sanity before I tackle rooting the ROM.
I probably did too much double stuff, but it is not easy to know when only A or B needs to be done.
Comments and tips are welcome.
Waancho said:
After quite some hours I finally managed to get Havoc Pie running (GSI ARM64 AB, downloaded here).
My first problem was the fact that you need to be on stock Oreo before starting, this took me a while to figure out.
I used the most recent 'back to stock' Oreo from this page.
After installing this, I booted up, and went straight for enabling USB-debugging in Developer options.
Then do ADB REBOOT BOOTLOADER to enter fastboot mode.
There I erased system on both A and B partitions by using FASTBOOT ERASE SYSTEM command, then FASTBOOT SET_ACTIVE OTHER to switch to the other partition, and then once more FASTBOOT ERASE SYSTEM to also erase the system on this partition.
After that I ran FASTBOOT FLASH SYSTEM Havoc-OS-v2.0-20181027-GSI-ARM64-AB-Official.img, on the one partition, then FASTBOOT SET_ACTIVE OTHER and after that FASTBOOT FLASH SYSTEM Havoc-OS-v2.0-20181027-GSI-ARM64-AB-Official.img to flash it on the other partition.
After that I installed TWRP by running FASTBOOT FLASH BOOT twrp-3.2.3-0-mata.img (downloadable here).
After that, I rebooted into TWRP recovery by running ADB REBOOT RECOVERY.
There, I put twrp-installer-mata-3.2.3-0.zip (downloadable at the previously mentioned TWRP website) on internal memory and flashed it.
This automatically flashes both A and B partitions (switching between A and B at the reboot screen).
After doing that, I wiped /DATA on both A and B.
Then I put the Havoc-OS-v2.0-20181027-GSI-ARM64-AB-Official.img on internal memory and flashed it on /SYSTEM for both A and B.
Then it is time for GAPPS.
As I prefer Stock GAPPS with my own GAPPS-CONFIG.TXT, I ran into the Error 70: because of the large size of Havoc, there is not enough room for large GAPPS.
So because of that I needed to do the Resize /SYSTEM partition for both A and B (in the Advanced wipe menu section).
After that I was able to flash my Stock GAPPS on both A and B.
Now I need some rest to regain my sanity before I tackle rooting the ROM.
I probably did too much double stuff, but it is not easy to know when only A or B needs to be done.
Comments and tips are welcome.
Click to expand...
Click to collapse
Wow, here's all i did :
Flashing ProjectTreble GSIs on the Essential using TWRP
1) either boot or fastboot into TWRP
2) Wipe Cache, System, and Data (1 GSI required internal to be wiped, i forget which)
3) From Main Menu, select Install and Flash UN-ZIPPED A/B system.img
4) Reboot Recovery (It's going to say there's no OS, act like you didnt see it.)
5) Reboot System and Enjoy!
6) Most of the later GSIs from October to Present I have flashed and am happy to say
they all contain pre-installed Magisk and ALL but 1 contains Gapps.
AndroidDevices said:
Wow, here's all i did :
Flashing ProjectTreble GSIs on the Essential using TWRP
1) either boot or fastboot into TWRP
2) Wipe Cache, System, and Data (1 GSI required internal to be wiped, i forget which)
3) From Main Menu, select Install and Flash UN-ZIPPED A/B system.img
4) Reboot Recovery (It's going to say there's no OS, act like you didnt see it.)
5) Reboot System and Enjoy!
6) Most of the later GSIs from October to Present I have flashed and am happy to say
they all contain pre-installed Magisk and ALL but 1 contains Gapps.
Click to expand...
Click to collapse
Thanks!
Next time i will try your method.
For some reason, if i did anything different, the phone would just keep rebooting into recovery.
And of course, the ROM that i chose (Havoc) did not have Magisk pre-installed.
I am now back to stock and liking it, which says a lot about the PH-1 software!
Waancho said:
Thanks!
Next time i will try your method.
For some reason, if i did anything different, the phone would just keep rebooting into recovery.
And of course, the ROM that i chose (Havoc) did not have Magisk pre-installed.
I am now back to stock and liking it, which says a lot about the PH-1 software!
Click to expand...
Click to collapse
It does have Magisk installed, it should if its one of the newer builds and all you need to do is install Magisk Manager which in turn activates Magisk
Installing Magisk manager was one of the first things I did, but unfortunately, the latest version A/B Havoc at the aforementioned link did not have Magisk.
There's about 6 or 7 and probably a bunch of YouTube's
Sent from my PH-1 using XDA Labs
Hello guys,
after testing around for days i thought it might be helpfull to post the honestly pretty easy procedure to install stock Oreo, root it and remove encryption if needed.
Disclaimer:
I am not responsible for bricked devices, dead SD-cards, lost data, etc.
Back up your data, app settings, be sure you remember your passwords, your device will be empty!
Edit: It seems, theres a bug that, if you read this post on XDA labs, won't show you everything, it seems like it randomly skips some parts.
What you need:
Unlocked Bootloader
Motorola USB drivers
15 sec adb and fastboot uploaded by myself since the original links aren't working anymore https://multifilemirror.com/hgxxyrfyd7rx.
I originally got them from here (you may have to go into your device manager and select the adb drivers for your phone f.e. when you want to use adb push in recovery, see original xda site).
This will also install the google drivers.
TWRP 32bit (v.3.2.3-0)
TWRP 64bit (v.3.2.1-0)
Disable Dm-Verity & ForceEncrypt from here
Magisk and MagiskManager. Newest should probably work, i used Magisk-18.0 and MagiskManager-6.1.0
Most recent Oreo firmware (edit 08.19)
(I used this Oreo firmware found in this post)
Steps:
Be sure you backed up your data and app settings, your pictures, downloads, etc. It will all be lost!
Please read all steps before you begin.
Extract the firmware into your adb folder (where you installed adb, should contain 4 files), copy both twrp (32 & 64 bit) in there, too.
Boot into bootloader (hold power+vol down) and open a terminal inside your adb folder (shift+rightclick) and type in
Code:
fastboot flash recovery name_of_twrp64bit_file.img
Boot into recovery (select recovery with vol buttons, then press power) and make a backup of EFS partition and persist folder (use file manager under advanced) and make another backup of system, boot and data and save both backups and persist to your SD-card or better your computer, too.
reboot into bootloader and check if your bootloader version is B.8.31 or above.
If it is B.8.31 or above DON'T FLASH BOOTLOADER!!! Because if you flash bootloader of the same version or below, it would hardbrick your device!
That also means if you f.e. want to downgrade to Nougat, just ignore following lines:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Also, unless youre sure your persist is absolutly ok (check here), please also omit the following lines:
Code:
fastboot erase modemst1
fastboot erase modemst2
They would reset your IMEI and usually it gets restored from your persist, but only if its not buggy.
Even if your persist is fine, as far as i know theres no harm in not using this commands (my persist is fine and i didnt use them).
Now paste following commands in your command promt in adb, in case you are BELOW B.8.31, add the bootloader commands from above between the first and second line:
Code:
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Please make sure that it really flashed all sparsechunk 0-8.
Let your phone reboot itself after installation is done, then return to bootloader and flash twrp 64bit:
Code:
fastboot flash recovery name_of_twrp64bit_file.img
Boot into recovery, since your device is encrypted it will ask for a password, click cancel, then go to WIPE and click on FORMAT DATA and confirm with yes.
This will remove the encryption of your data partition.
Go back to twrp main page and click on REBOOT then RECOVERY.
Once back in twrp, either copy Disable Disable_Dm-Verity_ForceEncrypt.zip and Magisk-18.zip and MagiskManager-6.1.apk to your SD-card or use
Code:
adb push name_of_file /external_sd
or
adb push name_of_file /sdcard
to copy the files to your SD-card (external_sd) or Internal-Storage (sdcard). For this you may have to manually configure your adb drivers in device manager, see here under Notes.
In twrp go now to INSTALL and flash "disable-dm-verity&encrypt" an then REBOOT and SYSTEM.
Return to recovery and flash "Magisk-18.0.zip", wipe Cache/Dalvik at the end and reboot System
Once System has rebooted, install MagiskManager-6.1.0.apk from your SD-card.
MagiskManager should say that Magisk is installed and in settings under security, your phone should be decrypted.
Note: MagiskManager will only show full information when it has internet access, all you see without is if Magisk is installed.
If you want to encrypt your device again, do it but flash twrp 32bit, too, if it asks for a password, it should be your usual password which you also have to enter on every boot.
Some explanation:
Why twrp 64bit?
Because twrp 32bit is able to bypass encryption, however, it causes some problems:
In fact, probably every twrp without the bypass encryption feature would work f.e. older 32bit version 3.1.0. but 64bit offers some features as EFS backup.
If you flash 32bit directly it can bypass the standard encryption but formatting data fails every time when you booted System previously.
When you reboot recovery and format data again it works, but it needs to fail first, just rebooting into recovery 2 times doesnt work.
I dont know what would happen if you (after using your phone normally) reboot recovery and f.e. want to do a backup from data, though im sure i testet it out, but i probably forgot.
You need it later when you want to encrypt your phone again, for me it didnt decrypt data after i reencrypted my phone using my password.
Why reboot System between flashing Disable-encryption and Magisk?
If you do not, you get heavy lags in the first 2 minutes after rebooting System, MagiskManager will say that Magisk isnt installed and then your phone will crash and reboot. But after that 2. reboot everything works fine again, Magisk is back, no lags.
I remembered this post from Johny Cipeli, between flashing no-verity and magisk he wrote to reboot, so i tried and it worked without lags and crash.
You don't need to remove encryption:
You can root your phone without flashing Disable_dm-verity_and_force-encrypt, use then twrp 32bit, dont format data, just flash magisk.
I can say that it should work, because that was one of my first attempts (and it worked for me), however i didnt write down what i was doing so i cant tell you step by step.
Additional:
In case you're searching Viper4Arise for Oreo, the Aroma installer won't work, use the Magisk module and install in MagiskManager. You can download it here from Zackptg5
If youre also annoyed by that One-Nav vibration, you can try using ExKernelManager app and activate the powersave mode. Although i think its officially not for G5, the app works, maybe that only refers to the Kernel and not to the app.
I tried Flyhigh Kernel, it didnt boot after flashing it, if you know a working Kernel for G5 which can disable One-Nav vibration, please write an answer.
My device:
Rooted Stock Oreo 8.1.0: OPP28.85-16
Bootloader: B.8.31
Model: XT1676 reteu
Stock Kernel
Thanks to:
Snoop05 for 15 sec adb and fastboot.
TheFixItMan for twrp.
Zackptg5 for "Universal DM-Verity, ForceEncrypt, Disk Quota Disablers".
topjohnwu for Magisk.
freeZbies for Official Oreo 8.1.0 OPP28.85-16 Fastboot Firmware.
Wolfcity, woozie.2007 and TheFixItMan for answering many of my questions!
- reserved -
ok friend, thank you for this. I think you dont need to flash twrp 64, i only flash official twrp 32, which indeed doesnt have the option for backup persist, but only efs. Maybe is someone else that will try your method to decrypt, I will try next time when I flash the stock, maybe to the next patch update. Good luck and A happy new year !!!
---------- Post added at 01:31 AM ---------- Previous post was at 01:26 AM ----------
LE: You cant root without format data partition, because flashing twrp, when twrp decrypt data you cant see anything on data partition, so you need to format it even if dont need to decrypt the phone
Nice guide @G5-User7080 .
For me everything seems to be correct, I can´t say anything device specific as I own a potter but there shouldn´t be big differences.
There´s one sentence I´m not sure about:
G5-User7080 said:
Because if you flash bootloader of the same version or below, it would hardbrick your device!
That also means if you f.e. want to downgrade to Nougat, just ignore following lines.....
Click to expand...
Click to collapse
It´s clear that downgrading the bootloader can hardbrick your device but why should there be any risk in flashing the same bootloader?
If I flash the fastboot firmware I´m on shouldn´t it be ok? Where did you get that information from?
I´m about to do that on a device of a friend of mine , he is rooted on 7.0 and wants to go the way to flash the firmware he´s on and after that take the OTA up to Oreo.
He could flash the Oreo firmware directly but he prefers to use the firmware from which he knows it´s working and is the correct one.
Very careful guy.
Edit: I just recognized that the part you called steps incl.the part I quoted isn't visible in XDA Labs, I'm only able to see it in mobile browser. Also some download links aren't there, on XDA Labs there is only the one for the 64bit recovery visible, not the one for 32bit. Maybe it's some kind of format problem, bb codes or else.
Some screenshots from XDA Labs and Chrome mobile to show the differences.
Wolfcity said:
It´s clear that downgrading the bootloader can hardbrick your device but why should there be any risk in flashing the same bootloader?
If I flash the fastboot firmware I´m on shouldn´t it be ok? Where did you get that information from?
Click to expand...
Click to collapse
I read this more then one time, although i could just find one source for now: "Flashing bootloader of equal or minor version will hardbrick your device" from Oreo Fastboot firmware.
I dont know why flashing bootloader of the same version would do lead to a hardbrick, but didnt want to try it out myself, also i see no problem in not flashing the bootloader when you already have the same version.
Wolfcity said:
Edit: I just recognized that the part you called steps incl.the part I quoted isn't visible in XDA Labs, I'm only able to see it in mobile browser. Also some download links aren't there, on XDA Labs there is only the one for the 64bit recovery visible, not the one for 32bit. Maybe it's some kind of format problem, bb codes or else.
Click to expand...
Click to collapse
Thats weird, i dont have XDA labs (thats the mobile app, right?), i wrote it on XDA desktop version and only used the size, code, color and list tags, hmm maybe it has problems with the sorted list, for every other part i used the unsorted ones with dots instead of numbers.
Quick test:
Test One:
this is made
in an unordered
list, using
list tags
Test Two:
this is now made
in an ordered list
counting from one to four
using list=1 tags
Can you read both lists with each four points?
And thanks for mentioning the bootloader thing,.. i realized i forgot to paste the lines in to flash bootloader in case you are below b8.31 ehee..
Wolfcity said:
Some screenshots from XDA Labs and Chrome mobile to show the differences.
Click to expand...
Click to collapse
wtf, it just skips random parts ?!!!
I have no idea what could cause this.. ill better add a note at the beginning of the post...wow
To flash the same vers of bootloader is not a problem, only the below one will hardbrick the phone
G5-User7080 said:
wtf, it just skips random parts ?!!!
I have no idea what could cause this.. ill better add a note at the beginning of the post...wow
Click to expand...
Click to collapse
Your lists are both readable.
I took a look at the BB codes as it's known that some of them are not working on XDA Labs like SIZE or HIGHLIGHT. In that case the BB codes are shown in the text but there's nothing missing.
Maybe it has something to do with the use of
[*] in your text?
Edit: Have you changed something in your text now? It seems to be complete on XDA Labs now too...
Wolfcity said:
Your lists are both readable.
I took a look at the BB codes as it's known that some of them are not working on XDA Labs like SIZE or HIGHLIGHT. In that case the BB codes are shown in the text but there's nothing missing.
Maybe it has something to do with the use of
[*] in your text?
Edit: Have you changed something in your text now? It seems to be complete on XDA Labs now too...
Click to expand...
Click to collapse
the [*] just create new lines for a list, and yes, i edited it two times, first, i added that one should use the bootloader commands in case of being below b831 and then i added the info about missing things on xda labs, but i didnt change anything on the lists itself,...