Couldn't find any other similar threads.
I previously owned a Asus Transformer and was able to use a Wii Remote + Classic Controller and never had any issues with it. I tried that on my Nexus 10 with a couple different apps to sync with but none of them could get the thing to connect.
I wasn't too dismayed, it's kind of a pain to have the Wii Remote with Classic Controller dangling off it. So I went out and bought a new Bluetooth controller (Nyko PlayPad), and I can't get that to connect either. Using the Nyko app it seems like it detects the controller but can't actually connect. I ran it through on my phone (Droid 4) and it worked immediately. I don't have any other Bluetooth devices I can test with, but are there any known issues with Bluetooth on the Nexus 10? Is this anything a new ROM or wipe could fix?
I too had a problem with the nyko play pad on my nexus 10. There app is garbage after using it it seemed to break Bluetooth connectivity on my device and I had to factory reset to get it back.
Sent from my SCH-I535 using xda premium
I think there was a change to the blue tooth stack in 4.2 which caused lots of different programs to have issues.
I failed to get a Wii remote to work and as far as I can tell it just isn't possible. A PS3 controller works no problem and in my opinion is much better since Android recognises it as a gamepad as opposed to an input method.
Is it possible to pair the Nexus Player ASUS controller with any Android device? I mean is it a general Bluetooth controller one could use for gaming on a tablet, phone, like any other Bluetooth gamepads out there?
IVBela said:
Is it possible to pair the Nexus Player ASUS controller with any Android device? I mean is it a general Bluetooth controller one could use for gaming on a tablet, phone, like any other Bluetooth gamepads out there?
Click to expand...
Click to collapse
You should be able to over Bluetooth which is how it connects tot he NP. I known that emulators support controllers so why not give it a try? If you don't have the NP I'll try it and let you know
My controller successfully gets connected with my phone and my laptop. Just press the home and back button together for a few seconds to get it to pairing mode and the simply pair it via bluetooth.
I don't have a NP, it doesn't seem to be good enough to order (have a Chromecast), with the limited memory and stuff. But the Gamepad looks so cool, I thought why not get it for my Android games? Wanted to have a Bluetooth gamepad anyways for some time...
iHarkunwar said:
My controller successfully gets connected with my phone and my laptop. Just press the home and back button together for a few seconds to get it to pairing mode and the simply pair it via bluetooth.
Click to expand...
Click to collapse
What kind of laptop were you using? Has anybody gotten it to pair with a Windows Laptop yet?
SoundMage said:
What kind of laptop were you using? Has anybody gotten it to pair with a Windows Laptop yet?
Click to expand...
Click to collapse
A normal windows laptop with Bluetooth
What edition of windows? I couldn't see available for pairing it on my MSI GT70 with Windows 8.1 64-bit. Other devices pair just fine.
I got it to pair on my laptop. But the buttons and pads aren't mapped correctly, e.g. it didn't work on Steam Big Picture or on any games. It's stuck going top-right. I assume they have the triggers mapped on the wrong axis. If anyone knows a way to remap the buttons, d-pad and sticks, I'd try it again. And it connected perfectly with my phone (Oneplus One.) I didn't test every button, wouldn't know how. Was able to remap some of them in MAME4Droid.
I paired the np remote with my nexus 6 and have an issue, when using it in Kodi, the select button ( the big center round one) does not do anything, any ideas?
I couldn't pair it with my G4, any tips?
From my understanding the DualShock4 PS4 Controller will work with the Shield TV when using USB/OTG cable. Has anyone tried pairing over Bluetooth?
I think the PS4 pad is the most balanced gamepad for thew type of gaming I do(mostly emu/retro gaming and occasional Android native games)and before I order one Id really like to hear from anyone who uses different types of gamepads
Yes, it works with the regular USB cable.
The PS4 controller can connect wirelessly to any android device using the closed source paid app Sixaxis Controller available on Google Play. This works quite well. If you adjust the settings and default mapping it can work just like a native Android gamepad and start the service on boot. Having tried it on my 16 GB model there are two caviats. Firstly it overrides the Bluetooth hardware to simulate a PS4, so you can't simultaneously connect any normal Bluetooth devices (such as the Shield remote). Luckily the Shield gamepad uses WiFi-direct. Secondly, for some reason the D-pad is unavailable during the gameplay of some games. This is no good for playing Half-Life 2. Also the non-default mapping doesn't play well with GTA San Andreas. Despite these issues I'm still glad I bought the Dualshock 4 (I don't have a PS4) because it's the nicest physical gamepad I've used, and the two issues I've listed are only software problems. My LG G3 running CM 12.1 nightlies can connect to the Dualshock 4 without the app but doesn't map well. Another cool thing about the Sixaxis Controller is that you can use the touchpad as a mousepad. Great for sideloaded apps. Oh and you need root to use Sixaxis Controller.
Got it. I was aware of sixaxxis for other android tablets/phones Ive used but for some reason I thought I had seen a youtube video of someone simply pairing a PS4 gamepad using the native Bluetooth pairing process. I may have been looking at a video of another device, not the ShieldTV
My Sony TV with built in Android TV has drivers for a PS4 Controllers to used via bluetooth, is there anyway I can extract the files to be used with the Shield TV?
Did you root the shield tv in order to use the sixaxis? Or did you change the master address and then pair as normal on the shield tv?
BenjiHansell said:
The PS4 controller can connect wirelessly to any android device using the closed source paid app Sixaxis Controller available on Google Play. This works quite well. If you adjust the settings and default mapping it can work just like a native Android gamepad and start the service on boot. Having tried it on my 16 GB model there are two caviats. Firstly it overrides the Bluetooth hardware to simulate a PS4, so you can't simultaneously connect any normal Bluetooth devices (such as the Shield remote). Luckily the Shield gamepad uses WiFi-direct. Secondly, for some reason the D-pad is unavailable during the gameplay of some games. This is no good for playing Half-Life 2. Also the non-default mapping doesn't play well with GTA San Andreas. Despite these issues I'm still glad I bought the Dualshock 4 (I don't have a PS4) because it's the nicest physical gamepad I've used, and the two issues I've listed are only software problems. My LG G3 running CM 12.1 nightlies can connect to the Dualshock 4 without the app but doesn't map well. Another cool thing about the Sixaxis Controller is that you can use the touchpad as a mousepad. Great for sideloaded apps. Oh and you need root to use Sixaxis Controller.
Click to expand...
Click to collapse
aggiemarine07 said:
Did you root the shield tv in order to use the sixaxis? Or did you change the master address and then pair as normal on the shield tv?
Click to expand...
Click to collapse
I rooted in order to use the Sixaxis Controller app. I never managed to pair it to the Shield TV via normal bluetooth (like I can with my phone). And the master address needs to be changed either way.
BenjiHansell said:
I rooted in order to use the Sixaxis Controller app. I never managed to pair it to the Shield TV via normal bluetooth (like I can with my phone). And the master address needs to be changed either way.
Click to expand...
Click to collapse
yeah I rooted my shield TV last night and using the Sixaxis appto run my Dualshock4 controller. Worked like a charm.
does the siaxais controller ps4 work with the nvidia shield for multiplayer?
The Sixaxis Controller app claims to be able to handle multiple PlayStation controllers but I haven't tested this. I can confirm that it works multiplayer using a DS4 and Shield Controller (which uses WiFi direct, so isn't affected by Sixaxis Controller overriding the Bluetooth hardware). Interestingly the DS4 now pairs with the Shield TV (via Bluetooth, without Sixaxis or root) and maps correctly as of firmware v2.1. Unfortunately it misses button presses and it's impossible to turn off the DS4 without unplugging the Shield or unpairing it (and it took about 20 attempts to pair). Sixaxis still works well but require root and disconnects all other Bluetooth devices. I'm fairly sure that you can pair DS4 controllers with Sony Android TVs out of the box.
will it work via a cable connected usb without a need for an app?
i want a second controller not sure which one to get
anyone using this with bluetooth be aware: if you leave the sixaxis app running for too long with dualshock bluetooth enabled, it may eventually disable bluetooth on your device when trying to go back.
ive been through 2 different nexus players, as well as a shield tv and all have ended up disabling OS bluetooth, even when turning off the sixaxis bluetooth, resulting in requring either a factory reset or android terminal installed and typing in some commands to get it to work again. What causes the issue seems to be random, as sometimes i can leave the app running and come back and it still works, other times it doesnt though. you can still use the nvidia controller since it runs via wifi, but the remote and any other bluetooth devices wont work. this issue is a random event and doesnt always occur, but it IS there, and its a pain to get it working again.
Perhaps someone can find a compatible app to sideload to enable/disable bluetooth in case this happens? would be much easier than typing in terminal commands.
does itwork fine wired ? and is it a better controler
unvaluablespace said:
anyone using this with bluetooth be aware: if you leave the sixaxis app running for too long with dualshock bluetooth enabled, it may eventually disable bluetooth on your device when trying to go back.
ive been through 2 different nexus players, as well as a shield tv and all have ended up disabling OS bluetooth, even when turning off the sixaxis bluetooth, resulting in requring either a factory reset or android terminal installed and typing in some commands to get it to work again. What causes the issue seems to be random, as sometimes i can leave the app running and come back and it still works, other times it doesnt though. you can still use the nvidia controller since it runs via wifi, but the remote and any other bluetooth devices wont work. this issue is a random event and doesnt always occur, but it IS there, and its a pain to get it working again.
Perhaps someone can find a compatible app to sideload to enable/disable bluetooth in case this happens? would be much easier than typing in terminal commands.
Click to expand...
Click to collapse
Yeah, I experienced the same issues in just my first time pairing a DS4 controller with the Sixaxis app... Also, like others mentioned on here, the default layout is a bit weird (Options=Select; Share=Back, etc) which means a lot of customizing in games, etc. Also, the service doesn't always auto-start that well so sometimes it takes some time to get it 'connected and ready to go' and I don't like how the app takes over Bluetooth while it's running. The only thing I did like is that the touchpad feature does work well (as long as the app supports 'Mouse input'), but overall I didn't think it's worth the hassle if I have to this every time I want to use the controller.
BTW, in case your Bluetooth becomes disabled while using this app, the command that worked for me (in adb shell) is:
Code:
su
service call bluetooth_manager 6
Has anyone successfully paired the shield with a DS4 without the sixaxis app? My shield can see the controller (listed as wireless controller) but they can't seem to pair.
finty said:
Has anyone successfully paired the shield with a DS4 without the sixaxis app? My shield can see the controller (listed as wireless controller) but they can't seem to pair.
Click to expand...
Click to collapse
Bump, Would also like to know!
d0ubl3_d1zzl3 said:
Yeah, I experienced the same issues in just my first time pairing a DS4 controller with the Sixaxis app... Also, like others mentioned on here, the default layout is a bit weird (Options=Select; Share=Back, etc) which means a lot of customizing in games, etc. Also, the service doesn't always auto-start that well so sometimes it takes some time to get it 'connected and ready to go' and I don't like how the app takes over Bluetooth while it's running. The only thing I did like is that the touchpad feature does work well (as long as the app supports 'Mouse input'), but overall I didn't think it's worth the hassle if I have to this every time I want to use the controller.
BTW, in case your Bluetooth becomes disabled while using this app, the command that worked for me (in adb shell) is:
Code:
su
service call bluetooth_manager 6
Click to expand...
Click to collapse
Same thing happened to me although I only had the app for about 2 hours before it disabled BT. I couldn't get it to work while installed, and i am rooted. I don't believe it works in the newest firmware 3.0.
What did you use to write those commands? Would adb minimalist work? Same app used to root the shield?
Sent from my Sammy S6 using Revolution 1.0
mattkilla420 said:
Same thing happened to me although I only had the app for about 2 hours before it disabled BT. I couldn't get it to work while installed, and i am rooted. I don't believe it works in the newest firmware 3.0.
What did you use to write those commands? Would adb minimalist work? Same app used to root the shield?
Click to expand...
Click to collapse
Well, I used the Nvidia Shield TV Utility App to get into an adb shell, but Minimal should work just as well. Just make sure to run the 'adb shell' command before you run the commands I listed on my post above..
I used terminal Emulator on the device and it worked great. Turned BT back on
Sent from my Sammy S6 using Revolution 1.0
Before rooting and buying the app I'd know if I can connect more than DS4 via bluetooth.. Anyone tried it?
thanks!
Hi,
So I've got android N running atm and wanted to pair up my ps4 with it but it keeps saying its unable to pair. I used 2 different controllers, same results. I was able to pair a pair of headphones with the device no problem. I was also able to pair both controller on another device. So I'm not sure where the problem is.
I'm also not rooted so I haven't used any other 3rd party apps. Also haven't tried it via cable.
Please help a brother out
thanks.
The game controller was working great until yesterday's 5.0.2 update. After my 2015 Shield TV updated and stabilized (and was restarted a few times for good measure,) I realized the controller was no longer working or paired. Now I can't pair it at all.
I fully charged it up just in case. I hold the Nvidia logo on both Shield TV and Controller until they both start blinking, set them within inches of one another, but they never pair. They just keep blinking forever, and I let them sit like this for 30 minutes. I tried countless times with same result - no matter what I do they just don't pair.
I did not yet try to pair the actual Shield TV remote because I use a Logitech Harmony Ultimate with Hub, and it's working fine via IR, so there's no BT interference there. I also have another BT game controller from my old Amazon Fire TV. It's listed as paired under "Other controllers" but I haven't tested it yet.
Has anyone encountered this problem? What workarounds can I try?
I upgraded yesterday and then did a factory reset, paired the controller fine but was a bit trickier than when i first setup with MM.
What i did was just hold the nvidia logo on the controller from my couch(no need to touch the SATV) and KEPT pressing it until the shield recognised and paired it, so do not remove your finger when it starts blinking. Took less than 20 seconds.
You could also "forget" the controller (removing any trace of it; like when you forget a wifi network) if you get bad behavior and then try pairing again as i did.
Enviado desde mi Moto X via Tapatalk!
lavero.burgos said:
I upgraded yesterday and then did a factory reset, paired the controller fine but was a bit trickier than when i first setup with MM.
What i did was just hold the nvidia logo on the controller from my couch(no need to touch the SATV) and KEPT pressing it until the shield recognised and paired it, so do not remove your finger when it starts blinking. Took less than 20 seconds.
You could also try "forgetting" the controller (removing any trace of it; like when you forget a wifi network) and then try pairing again as i did.
Click to expand...
Click to collapse
I'll try a factory reset when I get home today. I can't "forget" the controller because it's not paired yet.
For some reason my controller only pairs when the shield is connected via WiFi. It won't connect when it's using ethernet!? And it was the same on MM too. Any ideas guys?
Sent from my SM-G935F using XDA-Developers Legacy app
Largewoodenspoon said:
For some reason my controller only pairs when the shield is connected via WiFi. It won't connect when it's using ethernet!? And it was the same on MM too. Any ideas guys?
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I also paired it while connected to wifi but now i have plugged in ethernet cable and controller keeps working. Didnt have to repair. The only thing i notice is that the back button (left side of nvidia button) is not working properly. In MM 3.3 i remember worked fine.
Enviado desde mi Moto X via Tapatalk!
Same problem here. Been fine since new, and hasn’t used it for a month or two and charged it and nothing. Can’t re pair it at all it just flashes .
You have to to disable ipv6 in the network settings