I can see my phone when I go into system report under USB but when I click to open Android File Transfer it doesn't see my phone. Updated driver and doesn't matter if debugging is on or off. ADB doesn't show it either. Never had problems. Unplugged my V20 and plugged my Nexus 6 and it found it right away. Any ideas?
Related
Okay, any ideas on why when i plug my Evo into any computer USB it charges, but it doesn't give me the menu to connect to it, it use to.
USB Debugging mode enabled, no there are no alerts in the notification menu. I have even tried changing the default preference on what to do.
Handheld is 100% charged. I have tried powering off and on, pulling the battery, went into fastboot and can get there....but i can't connect from pc...so SDK and access evo-recovery for nandroid options are a no go.
I am realitively new to this, and am hoping the experts and the community will be able to pull through for me.
Thanks
rooted and running 3.1.2 RvU with radio fix patch applied.
oh, and just to make it further clear, the handheld is working great aside from that...
(i also tried different cables)
Anybody??
Anybody else ever see this before?
Identical problem. It started after the phone crashed while on a call. Don't know how to fix it, but I'll let you know if I find out.
So, the problem appears to have fixed itself (since I can now select my connection type again). I read on another thread that removing the battery for about a minute could be a potential fix. For me, trying again after more than 24 hours of up time seemed to be enough.
Hope this helps you out...
Hey guys...so maybe I'm not doing it right.I've purchased the 32 GB device and everytime I connect it to PC no matter if USB debbuging is selecyed ot anything else I cannot for the life of me create new files or transfer files into device. I usually get an error message saying..the device has either stopped responding or has been disconnected.?? What gives? I've decided to download wifi file transfer but what should i do? Ive just rooted the device and problem existed even before then.
Playdoe said:
Hey guys...so maybe I'm not doing it right.I've purchased the 32 GB device and everytime I connect it to PC no matter if USB debbuging is selecyed ot anything else I cannot for the life of me create new files or transfer files into device. I usually get an error message saying..the device has either stopped responding or has been disconnected.?? What gives? I've decided to download wifi file transfer but what should i do? Ive just rooted the device and problem existed even before then.
Click to expand...
Click to collapse
AirDroid tends to work better than that MTP c**p, especially for larger files.
Also I noticed MTP tends to be a bit buggish if the device goes to sleep (ie: screen turns off) especially if you use a lock (pattern lock etc).
kbeezie said:
AirDroid tends to work better than that MTP c**p, especially for larger files.
Also I noticed MTP tends to be a bit buggish if the device goes to sleep (ie: screen turns off) especially if you use a lock (pattern lock etc).
Click to expand...
Click to collapse
Yeah buddy but the problem is i can't copy anything wether on MTP or the other. It won't let me. So it seems my only option is these over wifi transfers? System always gives me an error message everytime I try to make a new file or copy and paste one. Only way I see the drive is if the system in under camera mode (can't remember which one that is right now) but yeah...the other mode won't show the drive and in "camera mode " there is nothing I can do.
The title says basically all. After full unlocking my Ativ-S, and in that process naturally installing the sdk, I have random problems on connecting to my laptop. I have to boot the phone to get connected. Before the root I never had any problems.
Oh and when I get connected, the green disconnect device safely icon appears and dissapears after connection, so I cant disconnect that way anymore... Could this actually be the cause, as the device has been dicsonnected wrong?
Help is appreciated as this is annoying!
It's been a little quirky for me too; the trick is that the phone has to be locked (pin-locked, not just lock screen) when you connect it to the PC, and then you need to unlock it; that *should* work. Did you apply the full-FS-access hack yet? That one seems to make it even harder.
By the way, you don't need to do the "safely disconnect" thing as long as there's no data being transferred. It's not USB Mass Storage, where you can actually corrupt the filesystem by unplugging the device in the middle of an operation, either; if you disconnect mid-transfer, all that will happen is the transfer will fail.
I didnt know that about disconnecting the phone safely. Though this disapearing on the disconnect icon also started happening at the same time, so it could be raleted somehow? Also I have applied full unlock to the phone, if thats what you meant?
Connecting with pin-code on does not seem to help. It is even possible that I need to reboot every other time to get connection, I havent investigated enough. I will look in to this over the weekend to get full picture whats going on here. I have a possibility test with other laptop, that does not have anything extra in it, just running W8.1 with regular drivers, so I will also test with that to get the SDK out of the picture.
I will report back.
Im glad this isnt such a big deal anymore, back in the WM days this would hve been a major pita.
It is not every other time. After I booted now I have connected/disconnected many times in a row. Same behaviour on the other system. Also on that laptop the disconnect device icon disapears. Whatever is causing this, its all on the phone side.
Loco5150 said:
It is not every other time. After I booted now I have connected/disconnected many times in a row. Same behaviour on the other system. Also on that laptop the disconnect device icon disapears. Whatever is causing this, its all on the phone side.
Click to expand...
Click to collapse
Do you have Full FS Access turned on?
-W_O_L_F- said:
Do you have Full FS Access turned on?
Click to expand...
Click to collapse
Yes, I did all unlocks possible.
Loco5150 said:
Yes, I did all unlocks possible.
Click to expand...
Click to collapse
Try to turn it off. It's unstable.
-W_O_L_F- said:
Try to turn it off. It's unstable.
Click to expand...
Click to collapse
It happened to me,too. I have a computer using Intel Core i3 and another powered by an old intel CPU.
on the i3 one, the phone appears as soon as i plug it in but on the old one, it takes a long time for the phone to appear..
AND on my Surface RT, it didn't appear even after 5 hours...
I didnt know what I was talking about, I didnt have FS access.. I did all interop unlocks only, I didnt have FS turned on. After turning it on, the phone is recognized by the computer and the disconnect icon appears, but its not seen by file explorer.
Im still experiencing these problems.
Seems that every morning I have to boot the device to get connected. After that I can connect the device as many times as I want.
few days ago during phone calls the screen started to black out - after 1 hoursof first blackout, screen started to show weird behavior, screen was being touched on random areas - i turned on show touches from dev mode and it showed random multi touches on top right corner of scree. after few minutes the screen turned black and since then i havent seen any sort of display on my note 3. i tried.
1. removed battery - let it rest for 15 minutes - connected back - phone turned on fine i could hear all sounds and notifications even receive calls if i swiped at correct screen area, However no display
2. tried to access the phone in adb but it wont show in devices even though usb debugging is enabled and all samsung drivers are correctly configured.
3. made backup of all the files on phone using kies.
4. Rooted the phone and tried to access recovery mode but vol up + home + power just turns on the phone.
5. currently the phone connects to pc as a media device with usb debugging enabled.
i think if i am able to flash firmware again it might resolve the issue, but so far i haven't been able to find latest stock builds that i can flash using odin since i cannot do anything in recovery mode (no display)
Can someone guide me on how i can get the display back ? is there any way to access the screen using a standalone pc app without the need to install any app on the phone ? can it be hardware related issue ? the phone never dropped, im a very careful user. screen is scratchless and phone is in perfect condition physically. Any help or guidance will be appreciated.
PS. Its my first time posting a thread on a forum, i hope i didnt break any rules. I searched alot on forums for someone having similar situation.
samdada47 said:
few days ago during phone calls the screen started to black out - after 1 hoursof first blackout, screen started to show weird behavior, screen was being touched on random areas - i turned on show touches from dev mode and it showed random multi touches on top right corner of scree. after few minutes the screen turned black and since then i havent seen any sort of display on my note 3. i tried.
1. removed battery - let it rest for 15 minutes - connected back - phone turned on fine i could hear all sounds and notifications even receive calls if i swiped at correct screen area, However no display
2. tried to access the phone in adb but it wont show in devices even though usb debugging is enabled and all samsung drivers are correctly configured.
3. made backup of all the files on phone using kies.
4. Rooted the phone and tried to access recovery mode but vol up + home + power just turns on the phone.
5. currently the phone connects to pc as a media device with usb debugging enabled.
i think if i am able to flash firmware again it might resolve the issue, but so far i haven't been able to find latest stock builds that i can flash using odin since i cannot do anything in recovery mode (no display)
Can someone guide me on how i can get the display back ? is there any way to access the screen using a standalone pc app without the need to install any app on the phone ? can it be hardware related issue ? the phone never dropped, im a very careful user. screen is scratchless and phone is in perfect condition physically. Any help or guidance will be appreciated.
PS. Its my first time posting a thread on a forum, i hope i didnt break any rules. I searched alot on forums for someone having similar situation.
Click to expand...
Click to collapse
2. To access via adb you have to grant the permission, once you connect phone in adb with developer mode (usb debugging) enabled, a pop-up will come asking for granting permission., once you grant then only you can acces it in adb mode.
*Sorry buddy, i don'y know about any app that can "access the screen using a standalone pc". (Google for it, You may found)
I guess it must be hardware issues,
But you can try out this:
Download the latest firmware from SamMobile or from SamsungUpdates website, and flash using ODIN.
Before downloading firmware make sure you download the correct firmware for your region (CSC)
If didn't worked, it must be a hardware issue.
Sorry.
Phone was in usb debugging mode before screen disappeared, now i cannot see the device in adb mode maybe because i need to change the connection mode to mtp, i cant do that , theres no display :S
Not sure what changed either on my phone or on my windows computer... I have it set to MTP and can see files but when i go to the pictures/dcim folder none of my photos are showing up.
Anyone have a fix for this? thanks