Hi you all,
this is probably not the right forum for this request (I don't have a Shield TV, but a Sony 4K TV with built in Android TV).
But I didn't find a better suitable Forum than this one.
I'm new here and generally relatively new with Android. I only got two Android devices at home:
- an Amazon Fire TV in my office and
- a Sony KD 55x8505c 4K Android TV in the living room.
My Smartphones and Tablets all run on iOS - but I realize more and more that it might be helpful to get a small Android Tablet in the near future to benefit from all possibilities Android offers.
Now to my problem:
I wanna use the German Sky Go App on my Android TV. The current version 1.4.3 is installed an it works. However, it's far from perfect because the menus are out of alignments, you can't see episode numbers and if you click anywhere else than the PLAY button, the app crashes.
I had exactly the same issue on the Amazon Fire TV - but there I found a solution. You simply needed to change the display density by typing "am display-density 280" before starting the app and it works perfect. You can automate that by using the app Tasker. So on Fire TV in the office - everything's perfect.
Now I wanted to achieve the same on my Android TV - and therefore I need your help. The command "am display-density 280" doesn't work an the Android TV. I tried entering it directly through a Shell / Terminal. When I started the Tasker App I couldn't get past the Disclaimer. There was no Accept button to be found. In a different forum I found a possible way for tasker by extracting an already activated tasker version from a different Android Device and installing this version on the Android TV. However, I only got the Fire TV as a different device and I have no idea how to extract the app from the Fire TV including the necessary data. But without knowing the right command to actually change the display-density, Tasker wouldn't help me anyway.
So the most important thing is to find a way to change the display-density to 280 first. Afterwards I need to find a way to automate that when the App is launched. Can you please help me?
Greets
z0dac
Hi,
I'm trying to do the same as you. I also read the Fire TV thread and tried Tasker on my Shield TV, which didn't work.
So i guess i'll set up tasker on my phone to change density to 280 when starting SkyGo and back to standard when leaving the app.
Then i have to backup the app+data - either with Helium (no root) or if that fails (which is likely) with Titanium (root, my Shield TV isn't rooted... yet ).
If i succeed, i could share the Tasker backup with you, if you're interested. I'm busy this week, but i might give it a try next week / weekend.
so here´s what i did:
i changed the display density with the adb command "adb shell wm density 280 %% adb reboot"
i could watch a trailer in sky go, but no luck with live streams or movies. so for now no solution from my side
Thank you!
I finally did it!
I installed Android Studio on my Mac including all SDKs. Then I turned Developer Mode on on my Android TV and connected through adb. With your command I was able to switch the display density to 280 and now finally Sky Go looks and works as it should.
However - now the whole Android TV OS is in density 280. I already noticed that the screen keyboard looks a bit odd.
Now the only thing I miss is the possibility to switch the density only for the Sky Go App. On Fire TV I can do that with Tasker, but on Android TV Tasked doesn't work. If anybody could help me with that...?
Thanks again and
Greets
z0dac
has anyone figured out why the Xfinity TV app closes or how to fix this I have the newest version installed on my nvidia shield and the app closes after about 10 minutes of watching a live or on demand show and goes back to the Home screen? On my fire stick the app doesn't close but I get other playback error on live channels. The TV to Go app works 100% on my correctly it never closes but it lacks a channel guide and DVR abilities so I would rather use the X1 TV app instead. any suggestions on how to get the app to stop closing back to the home screen?
I can't even get it to authorize my device. I put in my info and it just gives me a retry error.
davidreyes13 said:
I can't even get it to authorize my device. I put in my info and it just gives me a retry error.
Click to expand...
Click to collapse
I think it did that for me too at first I had to call Comcast and tell them I to activate my account to use the X1 TV app they did something on their end and I was able to login and add my device to the system. . I wasn't able to use the app on any device though so that may have been something different
jlennonfan said:
has anyone figured out why the Xfinity TV app closes or how to fix this I have the newest version installed on my nvidia shield and the app closes after about 10 minutes of watching a live or on demand show and goes back to the Home screen? On my fire stick the app doesn't close but I get other playback error on live channels. The TV to Go app works 100% on my correctly it never closes but it lacks a channel guide and DVR abilities so I would rather use the X1 TV app instead. any suggestions on how to get the app to stop closing back to the home screen?
Click to expand...
Click to collapse
Same issue, want to get it working on the Shield. any fixes?
Have you tried this modded apk? It's been floating around and hasn't given me any issues. It even opens right to the live tv channel selection. I also created a banner so it shows up in the Android TV leanback launcher.
http://www.filedropper.com/xfinitytvgopackage
disregard, i just realized your post said not TV GO...
The reason xfinity tv app was closing was due to the blue tooth keyboard turning off after not being used got a WiFi one solved the problem or now just using the game pad right control stick. New issue is the newest version won't play content I have to use the old version of the app. Anyone have any ideas?
BUMP, we really need to figure this out! I was really enjoying the TV GO app working on Shield, now that it is retired we really need to focus on getting the replacement Xfinity TV app working!
Yes, mine does the same and won't work. Now it looks like it is dead and they have stopped the server. I have tried all different solutions. Is there a modded apk or a fix yet? I used to use the Xfinity TV Go and now it won't work. Xfinity TV won't even open.
I can confirm that the Xfinity GO app no longer works on the Shield TV and that the current Xfinity TV app crashes/closes after launch. My guess is that the app checks the type of device that the app is installed on and if it detects that it's an Android TV OS it automatically closes. I wonder if there's a way to modify the APK to either trick the device into thinking it is running on stock Android or remove the check altogether?
Homestar9 said:
I can confirm that the Xfinity GO app no longer works on the Shield TV and that the current Xfinity TV app crashes/closes after launch. My guess is that the app checks the type of device that the app is installed on and if it detects that it's an Android TV OS it automatically closes. I wonder if there's a way to modify the APK to either trick the device into thinking it is running on stock Android or remove the check altogether?
Click to expand...
Click to collapse
I rooted one of my shields so it is running full android OS 6.0 and in about devices it declares it's self as a Tablet thinking the same line of thought you are presenting. No dice. Downloaded the Tvgo app and it did just about the same thing. The app loaded and I got all excited then I selected some content I had recorded and live tv and both times it came up with something to the effect that your carrier does not support releasing DRM content to this device crap.. Ultimately they want you to rent one of their POS boxes. The silly thing is if that is what they are so worried about, losing that revenue stream, then why allow anything but their devices to run their content? Can still run on laptop or pc no problem. Apparently they are not aware of casting? It's all the same big corporation trying to hold onto market share by force instead of placing that energy into developing things people want along with the evolving tech. They will have to evolve or go the way of Block Buster video. LOL.
Hi Guys,
Been looking at this for a while. I have a Nexbox A95x Aml based Android box. The latest version of the Xfinity TV App (3.10.0.016) refuses to work . But... I have managed to find a earlier version that does. I can only presume after this version (3.2.1.028) they added the DRM type check , to check for either root or a "non approved" device.
I have tested this quite a bit and it does live TV and also you can even download (the holy grail lol) and watch shows offline. To do this,the app MUST be left on internal storage and not moved to the SD card.
The bad news is that at some point I bet Xfinity will force a update ie make this older version non working. But hopefully , someone here will be able to turn that off.
Dont forget to go to the Google apps store and disable Auto updates on this app ,otherwise your device wil just Auto install the newer version.
Hopefully , someone (much more skilled than me lol) may be able to compare this older version with the new one and disable DRM check for a newer version.
I have uploaded the version that works for me here:
h t t p://bit.ly/2gQn3eR
Sorry for the funny url , but XDA will not let me post urls until I have ten posts..
Any updates on making the official XFinity TV app work now that XFinity TV Go has been shut down?
I am also looking for someone who can mod the new Xfinity app (remove the HDMI check.......I think) to get it to work on the fire stick. The new version loads but will not open. The screen automatically goes blank and closes down.
I just wanted to let everyone here know that if you upgrade your shield to Nougat the Xfinity TV even older versions of the software that would work on prior to the new 7.0 firmware release now won't work at all so if this is something you want I would hold off on doing the 7.0 Nougat update to your shield I plan on reverting back my shield to regain the ability to use the Xfinity TV app.
jlennonfan said:
I just wanted to let everyone here know that if you upgrade your shield to Nougat the Xfinity TV even older versions of the software that would work on prior to the new 7.0 firmware release now won't work at all so if this is something you want I would hold off on doing the 7.0 Nougat update to your shield I plan on reverting back my shield to regain the ability to use the Xfinity TV app.
Click to expand...
Click to collapse
Thanks for that information. Sucks for us Nougat upgraders though.
hey guys
I've got some pretty good news for those with the new Nvidia shield or have updated the old one to Nougat already and lost the ability to load the Xfinity TV app. I have found an alternative way to watch Xfinity on the shield Tv it is not an ideal way to watch and may not work for everyone's needs. I found that if I launch a game stream game on the Shield and Minimize the Game window before the game starts up or goes full screen, you will get a remote desktop like session which can be controlled with the the joystick on the gamepad. open a web browser and go to Xfinity and it works there is no lag or out of sync audio, it works pretty good, the Quality is better than casting a chrome browser tab from the PC, I also found controlling youtube from this remote desktop method is a far better interface than the Android TV app since you get the full website version of youtube instead of the slimmed down tv app. I should point out this nvidia Gamestream Remote environment is different than using a typical remote desktop client like the Microsoft Remote desktop client, most remote desktop clients don't offer the refresh rates needed to stream HD video without lags or audio syncing issues however the Nvidia Gamestream app does. I am sure there are other apps that can deliver a RDP session with the high refresh rates needed for viewing 1080p video over and RDP connection, I just haven't found one that works that will do this job. If anyone is aware of another app than can do this let me know I'd like to try it out.
https://www.dropbox.com/sh/hc652xc2bq8yrfa/AAAkahHih0lzdxbJN4uPL8Rla?dl=0&lst=
usmcnyc said:
https://www.dropbox.com/sh/hc652xc2bq8yrfa/AAAkahHih0lzdxbJN4uPL8Rla?dl=0&lst=
Click to expand...
Click to collapse
Are these files modified?
OM619 said:
Are these files modified?
Click to expand...
Click to collapse
We confirm these work
I am trying to get all4 on my shield, I've tried many things but failing to do it lol.
OK so I've tried installing the apk I got from someone who backed it up for me from a fire tv but it seems like the apk was just a wrapper so it didnt work.
I have the amazon appstore installed but it recognises my device is not a fire TV device and won't let me install.
Is there a way we could spoof the amazon appstore to see the device as a fire tv or maybe spoof the device so apps think its a fire TV (if that makes sense).
So spoofing the amazon appstore I have an idea -
Using "app cloner" it has a build prop option to where you can modify the apk to see the device as what you wish by filling in the right build prop details for the device you want to spoof to.
Only thing is - I don't have a fire TV device to get the details so I can't try this yet. (If anyone had the details please let me know so I can try - just need to install app cloner and it will show you the info)
Can anyone help with this?
I also have a second problem I've been trying to deal with for years now lol.
There is an app called "notifications for android TV", what it does, is it send notifications from apps on your phone and displays them on the TV in a way where when you install the app on android TV the app auto installs as a server, when you install the same app on phone it asks you if you want to set up this phone as a server or client.
I used to run full android custom ROM on my shield TV, when I did I used app cloner to install 2 versions of this app and installed one as server and one as client so all the notifications were handled by my shield TV and I did not need a phone connected to send notifications - this is ideal. I'm love look ing to try do the same thing on stock nvidia firmware but every time it detects the app as android TV and doesn't you the option to install as a client.
I just need a way to spoof/mod the app to think its installing on a phone instead of android TV.
Can anyone help with this stuff, been bugging me for soo long now lol.
I just side loaded the mobile all4 application from apkpure.
Sure, you need to use a mouse to navigate it, but it works fine for me.
I should have mentioned I am looking for the fire TV version specifically as it is remote friendly. I have the version you are using already.
My son has a Fire HD 8 tablet that thanks to you all, I have installed LineageOS 7.1.2 on. It runs great now, but we'd like to install an application that is only available in the Amazon App store and designed to run only on stock FireOS. I think the app would run perfectly fine on the tablet with Lineage installed, but unfortunately the Amazon App store no longer recognizes the tablet as a Fire tablet and therefore blocks our ability to download the app.
Is there some sort of workaround that could be tried here? I've read about people modifying build.prop to spoof the device type and run "unsupported" apps, so perhaps that is the route we'd take here? I'm just sort of stumped here and really don't want to go buy another fire tablet just so we can run stock fire os for his game.
The apps in question are the Osmo kids learning series. Any help would be very much appreciated.
*edit - i have searched for .apks of the app online that would allow me to manually install, but i have been unable to turn any up.
ChrisULM said:
My son has a Fire HD 8 tablet that thanks to you all, I have installed LineageOS 7.1.2 on. It runs great now, but we'd like to install an application that is only available in the Amazon App store and designed to run only on stock FireOS. I think the app would run perfectly fine on the tablet with Lineage installed, but unfortunately the Amazon App store no longer recognizes the tablet as a Fire tablet and therefore blocks our ability to download the app.
Is there some sort of workaround that could be tried here? I've read about people modifying build.prop to spoof the device type and run "unsupported" apps, so perhaps that is the route we'd take here? I'm just sort of stumped here and really don't want to go buy another fire tablet just so we can run stock fire os for his game.
The apps in question are the Osmo kids learning series. Any help would be very much appreciated.
*edit - i have searched for .apks of the app online that would allow me to manually install, but i have been unable to turn any up.
Click to expand...
Click to collapse
Get Amazon Appstore for Android on Amazon:
https://www.amazon.com/gp/mas/get/amazonapp
Hi all, wondering if anyone has attempted messing with this unit - found nothing on Google/duckduckgo.
Had it 2ish years, been a glitchy little monster and apps like Hulu show incompatibility (though they are 'preloaded' and on the menu). So far as I can tell the system OS has never been updated and am curious what might be done to refresh it?
TheDrake2k said:
Hi all, wondering if anyone has attempted messing with this unit - found nothing on Google/duckduckgo.
Had it 2ish years, been a glitchy little monster and apps like Hulu show incompatibility (though they are 'preloaded' and on the menu). So far as I can tell the system OS has never been updated and am curious what might be done to refresh it?
Click to expand...
Click to collapse
Unfortunately most android TV's don't get updates because the manufacturer doesn't take the time or resources to make an update and push it to the TV's.
As for glitches and apps I would try expanding it's memory using a flash drive and moving apps to it and letting the device use it as internal storage. And I'd use a PC or laptop and download the free program called "adb app control" and use the debloat option and clean some stuff off it. I'd also suggest getting a lighter launcher than the default one. There's a few options here -> Link but I like one called dashboard from the playstore. Also install a launcher manager and/or button mapper (both are free). Hopefully some or all of this helps make your tv a little snappier. I have a fairly new Hisense android tv and I did all this and it feels a lot better than stock.