Related
Hi,
i tried to install the [ROM] PopWiz Edge Plus 5.1.1 for the Galaxy S5 SM-G900X Snapdragon [Xposed] [Stable] on my Samsung G900F,
everything was good, but i had no network connection. IEMI was correct and the phone tried to connect.
I flashed the rom with TWRP twice. One time with a normal wipe, the second time with formating the internal storage (so it was a extremely clean install). I restored the EFS folder from an old (working) backup und the modem, without success.
After that i restored my old rom from a nandroid backup. IMEI is still the same but i do have network connection.
Does anybody had the same problem?
I am from Italy, i dont know if this count or not.
Do you have Bootloader and modem from the latest lollipop Rom? If not, download from Sammobile and install it with Odin. Then install an advanced recovery, I recommend you PhilzTouch and then root.
Finally flash Popwiz Rom, in aroma select your model and the lite version. Enjoy your new S6 Edge+ ?
Hope I help you,
Regards
Shaavoo said:
Do you have Bootloader and modem from the latest lollipop Rom? If not, download from Sammobile and install it with Odin. Then install an advanced recovery, I recommend you PhilzTouch and then root.
Finally flash Popwiz Rom, in aroma select your model and the lite version. Enjoy your new S6 Edge+
Hope I help you,
Regards
Click to expand...
Click to collapse
Bootloader and modem are from latest lollipop.
now its working, i reinstalled the rom again with a FULL WIPE first and after that i installed the CSC MODS, like i did before, but this time it worked, dont know why, but for now its ok for me,
thanks for the help.
Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.
Download Stock firmware from sammobile for your phone and flash it with ODIN.
dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.
dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?
Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom
Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>
Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?
So I have a Note 4 SM-N910G Variant Currently running 5.1.1 Lollipop and I'm looking forward to root it since my warranty is over. (Snapdragon) I want to flash dr.ketan's rom ( http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568 ) but obviously I need to root my phone first.
I have researched through many youtube videos and website for Rooting and to my understanding, I need to download a kernel and flash a recovery called TWRP, flash SuperSU and then flash the ROM itself.
But so far, All I could find were kernels for other variants except N910G, some of them said that I can use the kernel for N910F ( http://forum.xda-developers.com/note-4/orig-development/tw-kernel-emotroid-team-t2990557 )
Can someone help me? And correct me if my understanding of the root procedure is wrong.
Really really really appreciated If you can help me
I tried to flash a kernal for SM-N910F 5.1.1 on my SM-N910G and it stopped my phone from booting (soft brick, got stuck on the first Samsung splash screen). I'm fairly certain that I did it correctly but I am new to Android so it might have been my mistake. I did get my phone working again by downloading the vanilla 5.1.1 SM-N910G firmware using SamFirm and installing it via Odin.
EDIT: I have successfully rooted my device using Noname Kernal http://forum.xda-developers.com/showpost.php?p=63217526
I just bought a Samsung Note 4 SM-N910S. I thought is with Snapdragon, but CPU-Z says it's with Exynos5433. Which custom ROM should I use and what recovery mode?
I've searched for Samsung drivers, but couldn't find any that work.
Android version is 6.01.
Help?
Well, I found my own answer regarding Samsung Android drivers. The only version that works is 1.5.30.
Now I'll install TWRP 3.0.2.0 and then I'll try MIUI 7.
SOCRATE_MMXII said:
Well, I found my own answer regarding Samsung Android drivers. The only version that works is 1.5.30.
Now I'll install TWRP 3.0.2.0 and then I'll try MIUI 7.
Click to expand...
Click to collapse
TWRP 3.0.2.0 failed to install, even though Odin said „PASS!”, so I installed PhilZ. Then I installed MIUI 7 and eRobot, but on start both gave the same error: Kernel not being SEenforced.
Now I'm searching for a kernel that is SEenforced.
I'm downloading Sweet ROM 17.1 with kernel SE enforced....
Well, my hopes that 910C ROMs will work with 910S Exynos variant were shattered. So, I'm back to stock ROM 6.0.1. I will root it and remove KNOX (I don't care about warranty anyway) and try to remove as much bloatware as possible. I wish I knew how to build a custom ROM...
I've installed 6.0.1 using Odin 3.x. Next comes root!
I wish there was a custom ROM for SM-N910S...
The ROM from SK Telekom sux!!! I've rooted the phone and tried to remove all the bloatware, but I was unsuccessful, resulting into unusable ROM.
I've found a tutorial to install a debloated stock ROM from SM-N910C based on android 5.1.1 which is a much better option than the original ROM. Not to mention the permission levels for 6.0.1 are messed up really bad, imho.
The ROM from SK Telekom sux!!! I've rooted the phone and tried to remove all the bloatware, but I was unsuccessful, resulting into unusable ROM.
I've found a tutorial to install a debloated stock ROM from SM-N910C based on android 5.1.1 which is a much better option than the original ROM. Not to mention the permission levels for 6.0.1 are messed up really bad, imho.
Just a friendly reminder : make a full backup before installing any ROM.
I think.....if you have modem file of 910S, you can try to flash custom ROM for 910C/H and the flashed your modem, and maybe it will work.
I'm on 910H, and that is the trick that we use to flash 910C ROM.
but please explore xda some more, maybe someone already tried it and succeed/failed.
@cacingbesar: I don't care about backups on phones, because I don't have any important data on them. The only thing I backup is the contact list.
Moving on with my saga...
I was thinking that maybe there's a way of converting my SM-N910S to SM-N910C, because at HW they are basically the same so I've started searching the net and found an interesting video on youtube on an indian guy who did just that on 5.1.1.
So, I followed his tutorial and installed his ROM which is debloated, de-knoxed and rooted which I very much prefer over the crappy SK ROM.
I've learned the trick of this is to use SM-N910C ROM, but flash the modem from SM-N910S. I wish I knew how to extract the modem from the stock SM-N910S and to inject it into custom ROMs.
Even though SM-N910S and SM-N910C are HW identical, a custom ROM made for SM-N910C doesn't work on SM-N910S. Why is that? I have no idea...
@cacingbesar: I don't care about backups on phones, because I don't have any important data on them. The only thing I backup is the contact list.
Moving on with my saga...
I was thinking that maybe there's a way of converting my SM-N910S to SM-N910C, because at HW they are basically the same so I've started searching the net and found an interesting video on youtube on an indian guy who did just that on 5.1.1.
So, I followed his tutorial and installed his ROM which is debloated, de-knoxed and rooted which I very much prefer over the crappy SK ROM.
I've learned the trick of this is to use SM-N910C ROM, but flash the modem from SM-N910S. I wish I knew how to extract the modem from the stock SM-N910S and to inject it into custom ROMs.
Even though SM-N910S and SM-N910C are HW identical, a custom ROM made for SM-N910C doesn't work on SM-N910S. Why is that? I have no idea...
SOCRATE_MMXII said:
@cacingbesar: I don't care about backups on phones, because I don't have any important data on them. The only thing I backup is the contact list.
Moving on with my saga...
I was thinking that maybe there's a way of converting my SM-N910S to SM-N910C, because at HW they are basically the same so I've started searching the net and found an interesting video on youtube on an indian guy who did just that on 5.1.1.
So, I followed his tutorial and installed his ROM which is debloated, de-knoxed and rooted which I very much prefer over the crappy SK ROM.
I've learned the trick of this is to use SM-N910C ROM, but flash the modem from SM-N910S. I wish I knew how to extract the modem from the stock SM-N910S and to inject it into custom ROMs.
Even though SM-N910S and SM-N910C are HW identical, a custom ROM made for SM-N910C doesn't work on SM-N910S. Why is that? I have no idea...
Click to expand...
Click to collapse
You can find some thread about how to extract modem from a stock rom. Or google it.
No....I'm not worrying your data, I worry that you lost your efs/imei, that would cost you dearly.
I'm using CWM as recovery and I don't think it's messing up with EFS/IMEI, nor does Odin3 as long as I don't tick the boxes I don't need.
Later Edit: this ROM is AMAZING!!!
SOCRATE_MMXII said:
I'm using CWM as recovery and I don't think it's messing up with EFS/IMEI, nor does Odin3 as long as I don't tick the boxes I don't need.
Later Edit: this ROM is AMAZING!!!
Click to expand...
Click to collapse
In „ODIN mode” says KNOX 1, but who cares...I like this ROM a lot.
I wish I'd be able to use eRobot ROM the same way...
SOCRATE_MMXII said:
I'm using CWM as recovery and I don't think it's messing up with EFS/IMEI, nor does Odin3 as long as I don't tick the boxes I don't need.
Later Edit: this ROM is AMAZING!!!
Click to expand...
Click to collapse
In „ODIN mode” says KNOX 1, but who cares...I like this ROM a lot.
I wish I'd be able to use eRobot ROM the same way...
Hello, what Custom ROM/Recovery did you later find for your N910s?
I have the same device!
I am also bought by mistake the korean version of Note 4 N910S ... the is no rom for it only the fermware in samsung web ..... its a dream for me to convert it to N910C .. and get rid of this headache
Fix
SOCRATE_MMXII said:
TWRP 3.0.2.0 failed to install, even though Odin said „PASS!”, so I installed PhilZ. Then I installed MIUI 7 and eRobot, but on start both gave the same error: Kernel not being SEenforced.
Now I'm searching for a kernel that is SEenforced.
Click to expand...
Click to collapse
I had same problem,so i reflashed CF-Auto root via Odin 10 ....FIXED
https://forum.xda-developers.com/note-4/general/tutorialhow-to-flash-n910c-rom-korean-t3663053
Hope this help
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)