Hello
I have rooted my box(16Gb) installed busybox and supersu.
Installed Viper4 Android and launched it. It asks to install the V4A driver then reboot. Did it yet everytime i open it it goes in a loop and keeps asking to install the driver as if it doesn't stick yo the previous install
Did anyone manage to get it running properly?
Thank you!
Related
If you have just updated to the official Lollipop and missing beloved DSP.... install the attached, this is taken from the anerik's CM12 build.
Intsall any recovery
boot into recovery and install the DSP Zip.. be sure to root your phone before this..
Open up the DSP manager and set up your settings.. go to play music and in settings dont worry if it shows up only the music fx settings.. DSP settings will work
Working fine
I need install to my phone viper4android
My phone is rooted an 5.0.1 gpe but i can't install viper drivers
is it possible install via this method
FM radio work?
Intall v4a
micoperia said:
I need install to my phone viper4android
My phone is rooted an 5.0.1 gpe but i can't install viper drivers
is it possible install via this method
Click to expand...
Click to collapse
Hi, i had the same situation, the problem is your moto g is not fully rooted, so that you can't install drivers in v4a or manually, to solve this you must install via recovery this file, http: //download.chainfire .eu/638/SuperSU/BETA-SuperSU-v2.39.zip
and thats all, you will have full root on your phone.
I hope you can understand my english xD
micoperia said:
I need install to my phone viper4android
My phone is rooted an 5.0.1 gpe but i can't install viper drivers
is it possible install via this method
Click to expand...
Click to collapse
if you are getting problem in viper saying to install driver again and again then download SeLinux Mode changer and open the app and then give root permission and then select permissive
if you are getting busybox error then install busybox app from playstore
the problem i had with v4a was that the system partition wad full, using gpe 5.0.1 here.
thanks for answer and you are right
supersu code has been updated yesterday and solved viper situation
I was installed correctly last night and works perfectly
I cant install v4a
I downloaded SeLinux Mode changer and set to permissive, I have busybox installed, root working and I'm using 5.0.1 GPE. But I still can't install v4a drivers. Can anyone help me?
Hi,
does anyone Viper4android full working on LineageOS 14.1 (20170221). I get everytime on start the force to install the driver.
I did these steps.
1. Rooting per SuperSu 2.79
2. Install BusyBox
3. Install SELinuxModechanger and set to permissive
4. Install Viper4android (with Nougat I/O Fix), grant access to root and install the drivers
5. Reboot
And it asks for driver installation again and no sound effects working.
Please let me know if you could help me!
ajx11 said:
Hi,
does anyone Viper4android full working on LineageOS 14.1 (20170221). I get everytime on start the force to install the driver.
I did these steps.
1. Rooting per SuperSu 2.79
2. Install BusyBox
3. Install SELinuxModechanger and set to permissive
4. Install Viper4android (with Nougat I/O Fix), grant access to root and install the drivers
5. Reboot
And it asks for driver installation again and no sound effects working.
Please let me know if you could help me!
Click to expand...
Click to collapse
When you rooted, did you either adb reboot disemmcwp or type "reboot disemmcwp" into a terminal emulator? It disables write protection to system, and allows the drivers to stick.
bluestudy said:
When you rooted, did you either adb reboot disemmcwp or type "reboot disemmcwp" into a terminal emulator? It disables write protection to system, and allows the drivers to stick.
Click to expand...
Click to collapse
That sounds like a solution and it worked directly. Love you brother!!!
ajx11 said:
That sounds like a solution and it worked directly. Love you brother!!!
Click to expand...
Click to collapse
I'm glad it worked for you, man.
Hi, I'm trying to install some Magisk Modules and I just can't do it, it says to me that isn't properly installed, I have Android Oreo 8.0
Click on install and choose direct install. Reboot, then try again.
I just recently installed LineageOS 14.1 and the su package on my Galaxy Note 3 (SM-N900P) and decided to install Viper4Android 2.5.0.5 via the ARISE package. I opened the app and it asked me to install the drivers, but then it immediately said that they couldn't install because it couldn't get root access. I made sure in the developer settings that root access was set to Apps and ADB. I tried uninstalling the drivers but I can't. Now it's stuck with abnormal drivers and I have no idea how to fix this.
YajuShinki said:
I just recently installed LineageOS 14.1 and the su package on my Galaxy Note 3 (SM-N900P) and decided to install Viper4Android 2.5.0.5 via the ARISE package. I opened the app and it asked me to install the drivers, but then it immediately said that they couldn't install because it couldn't get root access. I made sure in the developer settings that root access was set to Apps and ADB. I tried uninstalling the drivers but I can't. Now it's stuck with abnormal drivers and I have no idea how to fix this.
Click to expand...
Click to collapse
Make sure Busybox (preferably Stericson's build) is installed. V4A requires it to handle its driver.
zlazaar said:
Make sure Busybox (preferably Stericson's build) is installed. V4A requires it to handle its driver.
Click to expand...
Click to collapse
Busybox installed without any issues, and the uninstall seemed to work immediately after, but v4a still can't install the drivers because it still can't get root permissions. And when I try to uninstall, it doesn't prompt me to install the drivers and the driver status still reads "abnormal".
YajuShinki said:
Busybox installed without any issues, and the uninstall seemed to work immediately after, but v4a still can't install the drivers because it still can't get root permissions. And when I try to uninstall, it doesn't prompt me to install the drivers and the driver status still reads "abnormal".
Click to expand...
Click to collapse
We can spend days troubleshooting your problem since you didn't mention many important informations (SELinux status, used Arise edition, selected options in arise_customize.prop...)
so allow me to describe a fail-proof method :
1- Dirty flash you rom.
2- Flash Latest Magisk.
3- Remove AudioFX app from /system/priv-app/
4- Download and install V4A FX module (available in download section of magisk manager).
That's it... good luck :good:
Or the Thread APP All Route
Overload87 said:
I have same Problem, on Samsung S5, with AOSP,AEX Rom Android 9 ! But still drivers not Working!
How could i deinstall Viper4Andriod !
Click to expand...
Click to collapse
Wrong forum this is for Note 3 not S5.
Usual is to restore Nandroid or reinstall rom .
V4A thread
Hi guys!
First of all, please do not send me to somwhere on forum because I have tried dozen of ways do deal with problem. My phone is LG G6 running on android pie. TWRP installed, Magisk installed. Im trying to instal viper4droid. I have tried download module from Magisk itself, I have tried to download .apk file from different sources, I have tried to download .zip file, I have tried to installed as apk itself and grant root accesss, tried by TWRP, tried unify installers and **** knows what else. Trouble is, First few times it was installed but status was "not running", Today after many attempts to deal with that viper4droid installing drivers and.......after each reboot its doing it again. Moreover i have found that sometimes Magisk did not show up the newest version of v4a as a module to download. So......is somebody for the love of god know what the **** is wrong? thank you.
marcin3595p said:
Hi guys!
First of all, please do not send me to somwhere on forum because I have tried dozen of ways do deal with problem. My phone is LG G6 running on android pie. TWRP installed, Magisk installed. Im trying to instal viper4droid. I have tried download module from Magisk itself, I have tried to download .apk file from different sources, I have tried to download .zip file, I have tried to installed as apk itself and grant root accesss, tried by TWRP, tried unify installers and **** knows what else. Trouble is, First few times it was installed but status was "not running", Today after many attempts to deal with that viper4droid installing drivers and.......after each reboot its doing it again. Moreover i have found that sometimes Magisk did not show up the newest version of v4a as a module to download. So......is somebody for the love of god know what the **** is wrong? thank you.
Click to expand...
Click to collapse
Hi man, there are three versions of viper4ndroid on magisk, try the viper4android fx legacy materialized as normal app after disabling play protect on google playstore. hope this helps
I will try that in a minute mate.
didnt work.
I have the same problem. I switched to viper hifi and now after reboot it is working but after some time it stops till i reboot it again. I think it is because of the pie version, on oreo everything works fine. After every reboot every mofule in magisk reinstalls. For example youtube vanced instals like new and i have to set it up after the reboot.
IIRC it required me to install viperfx (the new version, not legacy or xhifi), audio modification library and audio compatibility patch, have you done that?
I have tried all three version of viper. I have isntalled it as a apk and modules in Magisk. All possible audio patches and compatibilies mods from magisk are intalled as well.
marcin3595p said:
I have tried all three version of viper. I have isntalled it as a apk and modules in Magisk. All possible audio patches and compatibilies mods from magisk are intalled as well.
Click to expand...
Click to collapse
if you still have this problem, try installing viper4android 2.7 as apk from xda lab, I was downgrading back to pie sometimes ago and couldn't get viper to work, besides the 2.7