In my car I've the Pioneer 9880BT (with bluetooth support). I can connect with the radio without any problem, but I saw a lot of limitations. I can't transfer my contacts to the radio. It freezes in the receiving contacts screen and then the bluetooth disconnects. Another thing is that after connecting, the only thing in the display that appears is that the hermes is connected. It don't display signal strength, battery power and other things that I saw after connecting a friend's basic cellphone from Nokia or Motorola.
Is there a way to solve these problems?
Thanks
Try installing Jetwaremobile on the phone, that extends the bluetooth capabilities.
http://www.jetwaremobile.com/
Thanks, I'll try it
It worked, thanks a lot
I have only one problem now, i still can't send my contacts.
Sending contacts have now worked, but there is another problem. I can't send more than 7 contacts a time. Hermes displays that has sent all the contacts (it sends very fast), but in the radio it freezes after sending 6/7 contacts. Closing the sending window in hermes, the radio displays contacts sent. Maybe the sending is too fast?
Thanks.
I was wondering iif you were able to get the pioneer to automatically detect the phone? I have a tytn and the P980BT and everything works great except for the contacts and the fact that I have to manually establish a connection with the phone.
Now it's eveything ok, I've installed Jetware 1.2 beta version. Now I've transfered all the contacts (273) without any problem.
The connection is automatic only when the bluetooth is active. If you turn the radio off (and in your car the radio is turned off after turning the car off) then you need to connect manually after turning the radio on.
If you can turn the radio on even with the car off, then the bluetooth will stay active even turning the radio off (you will see the bt light on), and after returning to the car, the bt will connect automatically. It won't connect only if you turn off and take the face off. Then you need to connect manually again.
interresting
So you work around is to keep the deck powered at all times and manually shutoff when you leave the car. Can you remove the faceplate and still have it work?
SparkS666 said:
Now it's eveything ok, I've installed Jetware 1.2 beta version. Now I've transfered all the contacts (273) without any problem.
The connection is automatic only when the bluetooth is active. If you turn the radio off (and in your car the radio is turned off after turning the car off) then you need to connect manually after turning the radio on.
If you can turn the radio on even with the car off, then the bluetooth will stay active even turning the radio off (you will see the bt light on), and after returning to the car, the bt will connect automatically. It won't connect only if you turn off and take the face off. Then you need to connect manually again.
Click to expand...
Click to collapse
Does anyone have an issue with their bluetooth when it's connected with the screen off, when you try to turn the screen on, you lose the bluetooth connection?
Does anyone know if there is a way to keep the bluetooth connection going and being able to turn your screen on?
How can you set the HD2 bluetooth to automatically reconnect to the last connected audio device if a disconnect happens ?
For instance if you move away from the bluetooth device too far and it disconnects, and then you come back close - automatic reconnect does not happen.
The iPhone automatically reconnects when you are back in proximity.
This is important for the car kit.
Thanks
Using H710 bluetooth headset and the same question. I set the phone down, get 10 feet away, come back and have to do the sync all over again. I should be able to just come back into range and have it reconnect. Also, if I've sync'd it once, all I should have to do is turn on the headset and have it reconnect.
you should be able to press the call button and or play button and it should automatically connect, failing that turn off and then back on your headset should connect to the last device.is your phone swithed to always discoverable.
I have the At&t Xperia Play, still completely stock, haven't had bootloader unlocked or installed any custom roms. Not sure if anyone else has been having these issues, I'm trying to figure out if my phone is defective or if the xperia plays have crappy bluetooth or maybe just the stock bluetooth is crap.
Anyways, I use my bluetooth to connect to the car stereo and stream music. The bluetooth on this phone never connects automatically. Sometimes it will connect for phone audio but not for media audio, I always have to go in and adjust it, or turn off bluetooth and turn it back on to get it to connect. Sometimes it just refuses to connect for anything until I turn bluetooth off and back on. My old Samsung Vibrant worked perfect, connected instantly no issues at all, even the Iphone 3gs had no issues and connected instantly. Another thing if/when the phone does connect, it takes awhile to connect, usually at least 30sec to a min before it connects.
Anyone have any suggestions or think the bluetooth radio on the phone may just be defective?
Hi all
I'm hoping for some help with a niggling issue with connection on my HD2. I am trying to connect it to my Pioneer head unit in my car. I am able to get it to connect in 'Open Connection' but I have to turn blue-tooth on after I turn on the head-unit. I have tried to register the handset which is sees but doesn't pair....I know I am using the correct pair pin as I have had it paired in the past. :S
Obviously it is an inconvenience in having an open connection and having to turn on and off all the time but i'd rather it connected as soon as I turn on the headunit without messing about with the phone each time.
Can anyone shed any light onto this problem?