Related
First time posting. As I was attempting to use odin to put the phone features on a us galaxy tab, I think I may have bricked it. I have tried looking at various threads for fixes. At this point I can still get into download mode, but now when I run odin it recognizes the tab but it fails when it attemps to write a file to it. At this point I feel like I'm spinning my wheels, but it doesn't appear to be totally gone if I can get into download mode.
Any help is greatly apprieciated
kunphuzed said:
First time posting. As I was attempting to use odin to put the phone features on a us galaxy tab, I think I may have bricked it. I have tried looking at various threads for fixes. At this point I can still get into download mode, but now when I run odin it recognizes the tab but it fails when it attemps to write a file to it. At this point I feel like I'm spinning my wheels, but it doesn't appear to be totally gone if I can get into download mode.
Any help is greatly apprieciated
Click to expand...
Click to collapse
First thing to do is not to panic . If you're in download mode then there's an excellent chance that you can flash the device. Odin can be a bit temperamental I've found on the few times I've used it. You could try using Heimdall. This has always worked for me (though I'm on OSX, not Windows). I think there are some guides on this forum for flashing using Heimdall. Give it a go if you can't get Odin to work.
I tried hemidall. Istalled drivers but when I try to run it it says it can't missing msvcd100.dll
kunphuzed said:
I tried hemidall. Istalled drivers but when I try to run it it says it can't missing msvcd100.dll
Click to expand...
Click to collapse
You're missing some Visual C runtime components. Install this. This is explained on the link I posted previously.
Im in download mode, charged the tab, but now when I plug in the cpu its not recognizing it anymore
I got the drivers back on my cpu. Odin can recognize it again, but it still won't write anything to the tab. I have also installed heimdall, but when I try to use a pit. the start button is grayed out and I also have flash failures from heimdall too. Any more suggestions?
I installed 10k rooted on my P705 and was about to install a custom recovery, when the phone came on it was in emergency mode but the computer could no longer detect it, I have tried all the usb ports on about 4 computers and changed the cable trice, So I'm a little bit sure it's nothing to do with the pc. I have tried putting it on holding volume + and -. Any help will be really appreciated because I am stuck right now.
I have gone through the forum for like 6 hours, I couldn't find anything , I apologize before hand if this was treated elsewhere.
Did you try flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher) while in emergency mode?
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
yes I did try to flash it but the computer doesn't detect it in the first place. So I get a " no phone found"
kevios12 said:
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
Click to expand...
Click to collapse
thank you but that didn't work either
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the LG MOBILE SUPPORT TOOL.
I'm not familiar with it, but I read here that it's an alternative to Software update.
need4steer said:
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the ...
I'm not familiar with it, but I read here that it's an alternative to Software update.
Click to expand...
Click to collapse
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL.
use another computer, maybe a problem with your OS (windows)
need4steer said:
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL[/URL].
Click to expand...
Click to collapse
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
d-hammer said:
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
Click to expand...
Click to collapse
Okay, I got it.
Did you install the latest drivers?
If not, you can do so by downloading and installing them from your support site or by downloading and installing LG PC SUITE.
After that please open device manager and see if there's anything there with an exclamation or a question mark. If there is, please don't continue and post back what it is.
Only when you see that everything is okay, disconnect your phone, turn it off, enter into emergency mode (by clicking volume up + volume down + power button), make sure that you're in emergency mode (the yellow screen), connect your phone, run Software update [KDZ] (KDZ-Flasher), make sure to set the right type (CDMA / 3GQCT), make sure to leave the PhoneMode in DIAG, browse your kdz stock firmware file, and then click on "Lunch software update".
I'll be looking forward for your comment.
Please don't give up!
luthfi_11 said:
use another computer, maybe a problem with your OS (windows)
Click to expand...
Click to collapse
thanks but I actually tried it on linux, it didn't detect it either.
d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
i have no problem with windows 7 & windows 8, just try another computer bro
d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
Try what I suggested above.
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
d-hammer said:
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
Click to expand...
Click to collapse
u fixed your phone or not. plz help. I'm also stuck in same problem.
diwaker0 said:
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
u fixed your phone or not. plz help. I'm also stuck in same problem.
Click to expand...
Click to collapse
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
I think he did not check usb debugging so cant find phone
Not sure if it will work but no harm trying at this stage:
take out batteries,
wait for 30s,
put it back,
hold power and volume down
when keys light up, touch menu button (not the home button)
feel vibrate?
LOL!
pwhitpod3 said:
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
Click to expand...
Click to collapse
K. A couple weeks later- for those of you with l45c:
You will get to the point where you find that LGNPST is the only thing that will flash. Having troubles registering the .dll? That cost me
over a week. Move the dll to your system/lg electronics/lgnpst folder and open the cmd window (terminal screen) as administrator.
Edit: Use the command> regsvr32 "name of dll".dll
You should google the regsvr command, as it is different for 64 bit machines, and there is a different system file to put the dll in..
Trouble is, we have no proper dll for the 45c. I tried the ms690 dll with an ms690 bin. Unfortunately, it flashed all the way through- and
now I have a perma-black screen... so don't try that.
I DO have an LGL45C-CT2 binary.... just no dll for the 45c, as usual. Not that it would matter- LGNPST cant see phone any more than
ADB could- there is no more 'emergency download'. I will check the battery, etc...
Morale of story- once again, there is evidence that the l45c is not supported. It is not an MS690, and probably not a P690... Use
LGNPST at your own risk, but quit pounding your head over other methods! Time wasted...
Until next time... keep hacking....
<del>
hi, I tried rooting my phone but it failed halfway through, now it's in firmware recovery mode, when i run kies it just constantly says connecting, have i bricked my phone
PAULRYAN52 said:
hi, I tried rooting my phone but it failed halfway through, now it's in firmware recovery mode, when i run kies it just constantly says connecting, have i bricked my phone
Click to expand...
Click to collapse
Download Odin if you don't already have it and the matching firmware for your model put phone in download mode and flash with firmware should bring you back
Don't panic!
Firstly, make sure you have the correct drivers so that Windows can see your phone (search on here).
Secondly, if Kies won't work, Odin probably will. Odin (again, search on here for it) allows you to flash any Samsung firmware to your phone (Search sammobile.com for firmwares, but MAKE SURE you get firmware for the correct version of Note 4).
Hope this helps.
ive downloaded the correct firmware for my phone now what do i do in odin
I'm at work at the moment, so I can't spend too much time on here, but this should help you out:
http://forum.xda-developers.com/note-4/general/note-4-n910f-original-firmwares-t3189968
my phone keeps disconnecting then connecting while i connected to odin
Try setting everything up in Odin, and then connecting your phone (in Download mode). Wait for the connection to be recognised by Odin, then click the button to start the flashing. Always works for me.
PAULRYAN52 said:
my phone keeps disconnecting then connecting while i connected to odin
Click to expand...
Click to collapse
If you used an extra back cover remove it and connect the cable again.Check if there is any lose connection.
kakkooran said:
If you used an extra back cover remove it and connect the cable again.Check if there is any lose connection.
Click to expand...
Click to collapse
sorted it just didn't like my laptop, I'm going to try and root it again
Glad you got it sorted out, and good luck with rooting your phone.
ive rooted but it starts up ok but it keeps restarting itself, when it starts up it has yellow writing at the top saying "getting Warranty bit : kernel" it vibrates once then vibrates again as it normally does when booting up. it's working ok now
Hi guys,i was looking for guide how to unlock Axon 7 with latest update 1.2.0B05 but can't find anything. Can someone please help? I want to flash resurrection remix rom and not to brick phone...or is there better roms?
I cannot believe you're asking this question.
YOU HAVEN'T READ ANYTHING.
This board is full with uncountable guides.
https://forum.xda-developers.com/showthread.php?t=3573108
Not working....error: Length cannot be less than zero. Parameter name: length
salle25 said:
Not working....error: Length cannot be less than zero. Parameter name: length
Click to expand...
Click to collapse
Really, the last thing this forum needs is people unable to find guides on their own...
Ask @bkores about the error
WTF is wrong with you ppl?? I came to ask for help and you told me i'm retarded and stupid in nice way! If you don't wan't to help anyone then don't post reply or help and don't QQ about that! Thanx a lot!
salle25 said:
WTF is wrong with you ppl?? I came to ask for help and you told me i'm retarded and stupid in nice way! If you don't wan't to help anyone then don't post reply or help and don't QQ about that! Thanx a lot!
Click to expand...
Click to collapse
I'm sry but there's nobody here who will tell you're stupid,
People here are willing to help, but if you are too lazy to search for the guides (yes more then one is available) people will tell you that you are lazy.
Now I link a working guide for you
https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
If you want it easier, search for the toolkit, it will make the most work for you.
Nope....not working. axon7tool.exe keeps crashing: "This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information."
Toolkit is useless too,MiFlash doesn't see phone when in EDL mode,reinstaled every possible driver i found and not even Zadig helped. I had custom roms on every singe phone i had,but this one is pain in the ...
Got it sorted....renaming to .bin was problem,thanx
question
me too
salle25 said:
Got it sorted....renaming to .bin was problem,thanx
Click to expand...
Click to collapse
Yes it's a bit harder to unlock and flash, good you managed that, I forgot to tell you that there are two toolkits win32 and win64.
Help cant repair my Axon 7 G latest B05
coremania said:
Yes it's a bit harder to unlock and flash, good you managed that, I forgot to tell you that there are two toolkits win32 and win64.
Click to expand...
Click to collapse
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Bizon86 said:
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Click to expand...
Click to collapse
So what don't you understand on this message? It tells you that your bootloader is already unlocked [emoji779] [emoji779]
marcus.linkenbach said:
So what don't you understand on this message? It tells you that your bootloader is already unlocked [emoji779] [emoji779]
Click to expand...
Click to collapse
No is not unlocked Axontooolkit says something oposit. I try both guides from this topic and:
- twrp dosent instal
- cant allow oem unllock
- when use UNLOCK BOOTLOADER Miflash dosent see my devices
Bizon86 said:
I try to use both method and still withaut succes also have message before run my phone "Your device software can't be checked for corruption, Please lock the bootloader"
I try almost evrything and nothing.
Click to expand...
Click to collapse
Your bootloader is unlocked, you only got to managed the rest, read this thread here, you will see it's familiar to your situation, read to the end.
https://forum.xda-developers.com/axon-7/help/to-date-guide-rooting-a2017g-b04-t3666808
I try this and still. nothing
Bizon86 said:
I try this and still. nothing
Click to expand...
Click to collapse
This is a bit thin.
A bit more details, you don't manage to go to edl mode ?
Did you try zadig to to get the right drivers working ?
What do see in device manager ?
Can you boot to stock recovery?
Did you tried to start from scratch with the guide, not the toolkit ?
No detail, no help
Edit: if you use only the toolkit, may ask in the toolkit thread for help ???
coremania said:
This is a bit thin.
A bit more details, you don't manage to go to edl mode ?
Did you try zadig to to get the right drivers working ?
What do see in device manager ?
Can you boot to stock recovery?
Did you tried to start from scratch with the guide, not the toolkit ?
No detail, no help
Edit: if you use only the toolkit, may ask in the toolkit thread for help ???
Click to expand...
Click to collapse
Zadig works for axon7tool only, MiFlash uses COM while axon7tool uses usb protocol
- The edl is dont working because phone go blank after use command and computer dosent see it.
- i try zading and try another driver effect is the same.
- in device menager i see android device but only when smartfon is running
- i start from the scratch the effect is the same
- i cant turn allow oem
the problem is with phone if i use adb reboot computer dont see phone
Bizon86 said:
Then what i must do any idea?
Click to expand...
Click to collapse
First of all, understand what you just did. If you don't explain it in an understandable way, we won't get any of it...
So:
-You unlocked the bootloader.
-axon7toolkit failed somewhere, and you didn't tell us exactly where
-you didn't try to use any guide to retake from where it ended up failing
-you didn't try to enter any mode
So just try to get to recovery or fastboot, using the 5 sec screen. After that we'll see
Bizon86 said:
- The edl is dont working because phone go blank after use command and computer dosent see it.
- i try zading and try another driver effect is the same.
- in device menager i see android device but only when smartfon is running
- i start from the scratch the effect is the same
- i cant turn allow oem
the problem is with phone if i use adb reboot computer dont see phone
Click to expand...
Click to collapse
If you go to edl, by adb command or by pressing both volume buttons while connecting usb the screen goes blank, that's ok, it has to be this way.
Why you want to turn on allow oem, you are already unlocked.
Your issue seems to be the driver, I guess.
Edit: try this maybe, from the toolkit FAQ
The toolkit says my device is connected through ADB but adb commands don't work?
Your device may be unauthorized. Unlock your device, open a cmd window, type in "adb devices" and then accept the "Allow USB debugging" prompt on your phone. Make sure to check the "Always allow from this computer" box as well. If you don't get the prompt, try retoggling USB debugging, replugging your device in, and revoking all USB debugging authorizations in developer options.
Soo i accidentally disabled the dev options on my samsung galaxy s7 edge and then decided to restart my phoe because i didnt notice and now im stuck with an error that says "custom binary blocked by FAP lock" now i looked around the internet on ways to fix this but the thing is that i cant really connect my phone to my computer, yes i did the volume down+power+home button thing and i connected it to my pc but nothing happened, odin didnt recognize my phone and my computer reads it as "gadget serial" i tried installing the usb drivers and all but i keep getting errors, its like my phone doesnt realy wants to cooperate.
Anyways i was wondering if any of you could help me with this please, i beg of you if anyone has an answer im willing to try, also if you need more info just ask, ill be glad to provide, thanks!
Anyone?...
Well i managed to fixed it so heres the solution for all of you that may come across this,
Soo basically make sure youre pc is fully updated, it must have all window drivers installed (i used windows 10) all window updates, make sure all the pieces of your pc are updated and then connect your phone and for the love of god be patient
I take it this is you're first time encountering something like this... at any rate, welcome to the forums.