Hello i wanted to install android 6.0 update(beta) to my p8 lite and now its stuck at huawei logo (one you get when you turn on your phone)
i was looking and trying different update.app files to restore it in recovery mode but none worked all gave me an error any ideas how i can sort it out i wanted to try emui website and hisuite but none have firmware for my p8 lite
I have a single sim uk p8 lite
How did you tried to install ?
VladHD said:
How did you tried to install ?
Click to expand...
Click to collapse
i download a update.app file aka firmware i put it in dload folder on my sd card (not internal memory of the phone ) i hold power button and both +- volume buttons and hold till it starts restoring it goes to 5% and fails
VladHD said:
How did you tried to install ?
Click to expand...
Click to collapse
with some UPDATE.app files it didn't even reach 5% it reached 0% and said version check fail
Reflash the system partition. If you lose your imei just upgrade over ota. So take the first rom that was oit for your device (i have dual sim so i don't know your firmware) you probaly took the dual sim software
Lordbannakaffalatta said:
Reflash the system partition. If you lose your imei just upgrade over ota. So take the first rom that was oit for your device (i have dual sim so i don't know your firmware) you probaly took the dual sim software
Click to expand...
Click to collapse
How am i supposed to do that ?
wolfaas12345 said:
How am i supposed to do that ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977/page1
Here you go. Follow this one and welcome in dual sim land :laugh:
Lordbannakaffalatta said:
http://forum.xda-developers.com/p8lite/general/guide-debranding-converting-single-sim-t3305977/page1
Here you go. Follow this one and welcome in dual sim land :laugh:
Click to expand...
Click to collapse
C:\adb>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
OKAY [ 15.264s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 15.269s
wolfaas12345 said:
C:\adb>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
OKAY [ 15.264s]
writing 'system'...
FAILED (remote: Command not allowed)
finished. total time: 15.269s
Click to expand...
Click to collapse
Is your bootloader unlocked?
Lordbannakaffalatta said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
no
wolfaas12345 said:
no
Click to expand...
Click to collapse
http://forum.xda-developers.com/p8l...unlock-code-huawei-immediately-t3242539/page1
Here you go follow this before you do anything.
Remember, first unlock bootloader than you can flash Roms and get root.
---------- Post added at 01:35 AM ---------- Previous post was at 01:33 AM ----------
wolfaas12345 said:
no
Click to expand...
Click to collapse
Btw are you Sure you're phone is An ALE-L21?
Lordbannakaffalatta said:
http://forum.xda-developers.com/p8l...unlock-code-huawei-immediately-t3242539/page1
Here you go follow this before you do anything.
Remember, first unlock bootloader than you can flash Roms and get root.
---------- Post added at 01:35 AM ---------- Previous post was at 01:33 AM ----------
Btw are you Sure you're phone is An ALE-L21?
Click to expand...
Click to collapse
just lol i tried to unlock it using this method few hours ago but i failed and i just found out why in model number instead of typing in HUAWEI Y300-0000 i was typing in Y300-0000 now its solved
wolfaas12345 said:
just lol i tried to unlock it using this method few hours ago but i failed and i just found out why in model number instead of typing in HUAWEI Y300-0000 i was typing in Y300-0000 now its solved
Click to expand...
Click to collapse
I actually laughed so haard that i waked up the Gf. That's the same thing that would happen to me ????
Lordbannakaffalatta said:
I actually laughed so haard that i waked up the Gf. That's the same thing that would happen to me ????
Click to expand...
Click to collapse
just lol how simple mistakes make such difference im trying to fix it now il keep ya updated
wolfaas12345 said:
just lol how simple mistakes make such difference im trying to fix it now il keep ya updated
Click to expand...
Click to collapse
Good luck.
Lordbannakaffalatta said:
Good luck.
Click to expand...
Click to collapse
ok now i have null imei numbers any ideas on that one ?
wolfaas12345 said:
ok now i have null imei numbers any ideas on that one ?
Click to expand...
Click to collapse
Perfect just update trough ota (settings -> updater)
Lordbannakaffalatta said:
Perfect just update trough ota (settings -> updater)
Click to expand...
Click to collapse
no updates
wolfaas12345 said:
no updates
Click to expand...
Click to collapse
Wich version are you on?
lordbannakaffalatta said:
wich version are you on?
Click to expand...
Click to collapse
ale-l21c432b132
Related
NONE OF THESE DEVELOPMENTS WERE DONE BY ME, YET I WONT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE
0. Download the attachment. unpack. get driver installed. turn debug on. connect phone to your pc. Copy SuperSU-Pro-*.zip to phone memory.
1. Get Unlock Code for your phone @ http://www.emui.com/plugin.php?id=unlock&mod=detail
Use google translate if needed.
2. Unlock your Recovery
Code:
#adb reboot-bootlader
#fastboot oem unlock [your unlock code]
3. run recovery.bat
Code:
**-1. Flash CWM Recovery-**
**2. Flash stock Recovery-**
##-3. Reboot to Recovery-##
Choose 1, and 3
4. In CWM flash the SuperSU
5. enjoy
the recovery and root package: http://goo.gl/NFbsWo
P.S. im selling my Mate 7 pm me
Thanks for posting this
Seems pretty straight forward.
I'm guessing we ll lose root once we update again?
No product model
Thanks for the tips. But I can't find Ascend Mate 7 product model on the list. What is the model of yours?
I'm thinking to buy AM7, but I want to make sure that I can root and install custom rom later, before buying it.
gn0s1s said:
Thanks for posting this
Seems pretty straight forward.
I'm guessing we ll lose root once we update again?
Click to expand...
Click to collapse
Yes, you have to flash back to the factory recovery and then update. After this, re-root it again.
---------- Post added at 10:52 AM ---------- Previous post was at 10:51 AM ----------
slaia said:
Thanks for the tips. But I can't find Ascend Mate 7 product model on the list. What is the model of yours?
I'm thinking to buy AM7, but I want to make sure that I can root and install custom rom later, before buying it.
Click to expand...
Click to collapse
You can root AM7. The root instruction applies to all AM7 models.
Can't find the AM7 product model on unlock website
getmobilephone said:
---------- Post added at 10:52 AM ---------- Previous post was at 10:51 AM ----------
You can root AM7. The root instruction applies to all AM7 models.
Click to expand...
Click to collapse
Actually what I meant is how to get the unlock code. Don't you need to unlock the device before rooting it? I checked on the Huawei website (http://www.emui.com/plugin.php?id=unlock&mod=detail) and I can't find the AM7 product model.
slaia said:
Actually what I meant is how to get the unlock code. Don't you need to unlock the device before rooting it? I checked on the Huawei website (http://www.emui.com/plugin.php?id=unlock&mod=detail) and I can't find the AM7 product model.
Click to expand...
Click to collapse
Can you send us your iemi? We can help you get the unlock code. no charge for you.
P.S. some of our customers reported that the unlock code cannot be issued on the website and require to contact huawei directly.
1 step I think is ok...
https://www.dropbox.com/s/thz1l3cltnwi7rz/20140102_173838.jpg?dl=0
now little problem with installation of recovery, when I launch recovery.bat I have this panel
https://www.dropbox.com/s/pt5r1xb7vh0ulmy/IMG_20141103_114349.jpg?dl=0
I have put the string **-1. Flash CWM Recovery-** but nothing I have only the stock emui recovery
Did you have a Recovery.bat or a Recovery.img?
... send from hell ... hahahaaaa ...
please...
Can you please write the steps out a little more.... this is my first Huawei phone.... used to samsung note's
I am a noob ?
bvt-1 said:
Did you have a Recovery.bat or a Recovery.img?
... send from hell ... hahahaaaa ...
Click to expand...
Click to collapse
I have unzip the file: Recovery_b119 and put the 2 files (recovery.bat and tool folder) in the C:\Program Files\Minimal ADB and Fastboot
ps inside tool folder is present file image named recovery_h60
Can find my model. I have HUAWEI MT7-L09.
olivgeig said:
Can find my model. I have HUAWEI MT7-L09.
Click to expand...
Click to collapse
Me too !! Please can you provide us with an unlock code:fingers-crossed:
zenn66 said:
Me too !! Please can you provide us with an unlock code:fingers-crossed:
Click to expand...
Click to collapse
LT09 seems to be European model.
I sent an email to Huawei to know fit it is still possible to get a code...
the link posted on a German forum posted previously seems to be fine but I do no read German that much and Google translate gives me akward results I do not trust...
So I think I'm going to wait for a while untill I find something I can trust (or understand )
http://www.emui.com/plugin.php?id=unlock&mod=detail
killernow said:
I have unzip the file: Recovery_b119 and put the 2 files (recovery.bat and tool folder) in the C:\Program Files\Minimal ADB and Fastboot
ps inside tool folder is present file image named recovery_h60
Click to expand...
Click to collapse
Which model did you have?
MT7-??
I used a Recovery.img, not a .bat...
... send from hell... hahahaaaa...
MT7-L09
Then try this... Its not a .bat, its an .img, like I used it
In cmd.exe wrote
Fastboot flash recovery recovery_h60.img not .bat
... send from hell... hahahaaaa...
Thx mate,
I followed your instructions for the UL-00 (the 2/16 Chines model in white. I couldn't stand the gold...) and it perfectly succeeded.
well done!
Now we're waiting for a custom ROM
I've unlocked my phone successfully this way and rooted it. But then i had to flash stock recovery again cause if not, OTA upgrades doesn't work at all. Worse : factory reset makes ur Emui rom look totally different after reboot (basic look, no theming, ugly...)
So when i put stock recovery back and factory reset, it looked like before.
But i didn't need to root again.
Sent from my HUAWEI MT7-TL10 using XDA Free mobile app
AxlMan said:
I've unlocked my phone successfully this way and rooted it. But then i had to flash stock recovery again cause if not, OTA upgrades doesn't work at all. Worse : factory reset makes ur Emui rom look totally different after reboot (basic look, no theming, ugly...)
So when i put stock recovery back and factory reset, it looked like before.
But i didn't need to root again.
Sent from my HUAWEI MT7-TL10 using XDA Free mobile app
Click to expand...
Click to collapse
permanent root ? that's fine !
Hi,
can anyone tell me clearly how to unlock the bootloader of my Zenfone 5 A500CG on Lollipop (WW 3.24.40.78) ?
Thanks
Managed to unlock via this : http://forum.xda-developers.com/devdb/project/dl/?id=15721
have you experienced no camera problem before this ?
I unlock bootloader but my phone is freeze issue
i was test another phone but have too ?
Do you how to fix it ???
i use TOOF-16GB-2GB and TOOJ-8GB-1GB
thanks
Angristan said:
Managed to unlock via this : http://forum.xda-developers.com/devdb/project/dl/?id=15721
Click to expand...
Click to collapse
Can you upload that file? The original has been deleted or removed.
TabascoTX said:
Can you upload that file? The original has been deleted or removed.
Click to expand...
Click to collapse
You're very lucky that I kept the file http://www.mediafire.com/download/487lp7b09jvg7xa/Bootloader_Unlock_Tool.zip
Angristan said:
You're very lucky that I kept the file http://www.mediafire.com/download/487lp7b09jvg7xa/Bootloader_Unlock_Tool.zip
Click to expand...
Click to collapse
Thanks a bunch. I cant get anything to work to unlock the bootloader. I'm trying to get TWRP flashed so I can check out CM12
still getting the error "FAILED (remote: partition table doesn't exist) This is irritating. I cant figure out why im getting that error
I know I need to rollback my version to 10k, however I am stymied by antirollback problems using lgup! I could really use some assistance on getting this to rollback to 10k. I have been reading the forums for 2 days now, hundreds of posts, and nothing works. I cant use the dirty cow method of installing twrp as it was patched and my phone auto downloaded the stupid update... Any help would be much appreciated.
Thanks Zernon916
You can't. You're stuck on P. You said it yourself it is anti roll back.
Gytole said:
You can't. You're stuck on P. You said it yourself it is anti roll back.
Click to expand...
Click to collapse
So no one has rooted it yet?
No
Hopefully it comes soon.
I might have a solution. If you are willing to try.. Let me know.
Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
Lets hear it ehhe
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Walter.White said:
I might have a solution. If you are willing to try.. Let me know.
Click to expand...
Click to collapse
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
popwar said:
We chatted via hangout and his process went through easily . but when i flashed twrp through lg up . it just did a factory reset rather than booting to twrp
Click to expand...
Click to collapse
let me know what you guys did as I could try looking into it
dudeawsome said:
let me knoe I'm down to test it out for you
---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------
let me know what you guys did as I could try looking into it
Click to expand...
Click to collapse
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
popwar said:
Basically just verified my bootloader was unlocked. And used the patched LG UP to Partition flash twrp recovery . got the 2 screens selecting Yes on both as normal with twrp but it just rebooted to android with a fdr
Click to expand...
Click to collapse
so essentially it never actually flashed twrp
dudeawsome said:
so essentially it never actually flashed twrp
Click to expand...
Click to collapse
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
popwar said:
Right. Upon reboot after hitting start in LGUP, it went to the stock android firmware upgrade screen, said 100% and rebooted . Did a battery pull when the LG logo came up. Put it back in and used recovery button combo (Volume - and Power). Said yes 2 times and it booted to android instead of twrp.
Click to expand...
Click to collapse
I tried this method out but when i press start the lgup just crashes
dudeawsome said:
I tried this method out but when i press start the lgup just crashes
Click to expand...
Click to collapse
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
yeah send it over
popwar said:
Did you select the Partition DL option? Might need the common dll to be patched as well. I can send you the 2 files i replaced in the lgup directory
Click to expand...
Click to collapse
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
popwar said:
Credit goes to Walter.White from this forum . I am just relaying the info that he provided me . here is the link to the files i used . ge.tt/3aI5xDm2 . just copy n paste in address bar . i renamed my original files .bak in case .
Click to expand...
Click to collapse
didnt work sadly
dudeawsome said:
didnt work sadly
Click to expand...
Click to collapse
The link?
popwar said:
The link?
Click to expand...
Click to collapse
no link worked but it didnt flash
dudeawsome said:
no link worked but it didnt flash
Click to expand...
Click to collapse
What does it do/say
After using the manual Oreo update 2 weeks, Flashing several treble roms. Most with little to no trouble. I ended up with no more 4g or LTE signals on my L24 USA model Honor 7X.
So I took the plunge and tried to roll-back from beta oreo back to EMUI 5.
It worked. It took only few minutes to complete. I wrote down the steps, it was 22 steps.
If you do attempt this too, be advised I do not know what possible things could go wrong, and you do so at your own risk.
I will likely refine the document if after reading it many times I find it too confusing.
You will need backed up images of your original firmware. AND the original /data/hw_init folder
If / when huawei finally release a "full-ota" for your device/ region . this will not be needed, but until then here is a method to return.
Thanks are needed here:
pro-team-mt for firmware
@Askuccio_DROID no-check recovery
@Sudeep Duhoon twrp recovery , and backup instructions
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
Merged into twrp flash file in new thread.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
*********************************************************************************************
*********************************************************************************************
Nice
I bet many users will follow this tutorial in the next days....
I was worried cause of the partition changes on Oreo that the downgrade would be very trick... But you got'it right
Still, wont work for me... (Stuck on FRP)
On About the Phone, is the model correct? Isn't it BND-AL10? (Since you used that model's image)
Great work.
Any tips for me:
- Boot phone
Using the SD card, is there any trick to prevent the phone to reboot? Any app? Any other trick?
- UPDATE.APP
All the files that i tried, NON make it passed the 5%...
This is the only way in that i have to the device...
-Relock Bootloader (?)
Just can't do it via Fastboot... Is there any other way?
Keep the good work
RSGI said:
Nice
I bet many users will follow this tutorial in the next days....
I was worried cause of the partition changes on Oreo that the downgrade would be very trick... But you got'it right
Still, wont work for me... (Stuck on FRP)
On About the Phone, is the model correct? Isn't it BND-AL10? (Since you used that model's image)
Click to expand...
Click to collapse
I have BND-L24.
I used AL-10 , basically at random. Firmware finder showed they had a roll-back fukk-ota.
My about phone screen shows correct . Even when I booted the China firmware.
Great work.
Any tips for me:
- Boot phone
Using the SD card, is there any trick to prevent the phone to reboot? Any app? Any other trick?
- UPDATE.APP
All the files that i tried, NON make it passed the 5%...
This is the only way in that i have to the device...
Click to expand...
Click to collapse
I'm pretty sure the reading till 5% screen it just the default screen while it is searching for the update file.
-Relock Bootloader (?)
Just can't do it via Fastboot... Is there any other way?
Keep the good work
Click to expand...
Click to collapse
Still do not of other method to release frp lock.
Pls give me link for BND-AL10 downgrade to nougat I tried fullota zip files , twrp stopped after no check recovery and throws error unable to find hw , but all files in the hwota8folder
ganeshram456 said:
Pls give me link for BND-AL10 downgrade to nougat I tried fullota zip files , twrp stopped after no check recovery and throws error unable to find hw , but all files in the hwota8folder
Click to expand...
Click to collapse
The file is already linked on the directions.
These directions do not tell you to use the hwota-auto-update.zip. if you are following those direction, kindly ask in that thread
Big thanks for the hint to use "adb reboot recovery" instead of TWRP's reboot button - I've been pondering for hours over what I've done wrong, and turns out this was it.
mrmazak said:
After using the manual Oreo update 2 weeks, Flashing several treble roms. Most with little to no trouble. I ended up with no more 4g or LTE signals on my L24 USA model Honor 7X.
So I took the plunge and tried to roll-back from beta oreo back to EMUI 5.
It worked. It took only few minutes to complete. I wrote down the steps, it was 22 steps.
If you do attempt this too, be advised I do not know what possible things could go wrong, and you do so at your own risk.
I will likely refine the document if after reading it many times I find it too confusing.
You will need backed up images of your original firmware. AND the original /data/hw_init folder
If / when huawei finally release a "full-ota" for your device/ region . this will not be needed, but until then here is a method to return.
Thanks are needed here:
pro-team-mt for firmware
@Askuccio_DROID no-check recovery
@Sudeep Duhoon twrp recovery , and backup instructions
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
*********************************************************************************************
Merged into twrp flash file in new thread.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
*********************************************************************************************
*********************************************************************************************
Click to expand...
Click to collapse
Can I try this on locked bootloader... Oreo??
Heartstoler1991 said:
Can I try this on locked bootloader... Oreo??
Click to expand...
Click to collapse
No, it is based on using a modified stock-ish recovery, which needs unlocked bootloader to flash.
And besides, this was a hackish method to get me by before there was a full OTA file for roll back.
I think your best bet on locked bootloader will be the host file mod and python server method hackintosh has talked about. He calls it erecovery. And it is intended to be done with the stock erecovery.
mrmazak said:
No, it is based on using a modified stock-ish recovery, which needs unlocked bootloader to flash.
And besides, this was a hackish method to get me by before there was a full OTA file for roll back.
I think your best bet on locked bootloader will be the host file mod and python server method hackintosh has talked about. He calls it erecovery. And it is intended to be done with the stock erecovery.
Click to expand...
Click to collapse
Can u give me the link plz... Tnx in advance
Heartstoler1991 said:
Can u give me the link plz... Tnx in advance
Click to expand...
Click to collapse
Oh yeah. Here
https://github.com/penn5/erecoverer
mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
Bro. I read that one.. It looks little beat critical ... And I don't have Internet connection on my pc...
Can u suggest me any other method to downgrade ..?? I tried Hisuite also.. But it won't work for me.. There is no option "switch to other version"
---------- Post added at 04:59 AM ---------- Previous post was at 04:57 AM ----------
mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
Bro. I read that one.. It looks little beat critical ... And I don't have Internet connection on my pc...
Can u suggest me any other method to downgrade ..?? I tried Hisuite also.. But it won't work for me.. There is no option "switch to other version"
mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
Bro. I read that one.. It looks little beat critical ... And I don't have Internet connection on my pc...
Can u suggest me any other method to downgrade ..?? I tried Hisuite also.. But it won't work for me.. There is no option "switch to other version"
Heartstoler1991 said:
Can u give me the link plz... Tnx in advance
Click to expand...
Click to collapse
Hey I've posted a few posts around on one of these I got the SE on the latest firmware. I'd there a way to downgrade to earlier Oreo or nougat service rom without bootloader unlock. I bought the credits then found I was to high of firm Ware. I can't find straight answers any where I've spent all day downloading, and trying to update, flash whatever I can all ending in error. All bnd l34 I've got 344 it's files which fail at 5% I've never used one of the fancy heuweis before. Used to lg and Samsung. I'm no noob on flashing . Hisuite does not show rollback options... Like I said just can't find any straight answers. I'm stuck with this one either way but root would be nice
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
mrmazak said:
Oh yeah. Here
https://github.com/penn5/erecoverer
Click to expand...
Click to collapse
My post was actually meant for you sorry
my device is showing failed to find device partition on my nokia 6 (ta-1021)
Emmykay223 said:
my device is showing failed to find device partition on my nokia 6 (ta-1021)
Click to expand...
Click to collapse
I'm having the same issue on TA-1000.
tvi_vladutz said:
I'm having the same issue on TA-1000.
Click to expand...
Click to collapse
That's why twrp is not booting on some devices cuz it can't find partitions
Emmykay223 said:
That's why twrp is not booting on some devices cuz it can't find partitions
Click to expand...
Click to collapse
And what we should do to rezolve that?
tvi_vladutz said:
And what we should do to rezolve that?
Click to expand...
Click to collapse
Is your bootloader unlocked?
I don't know... ?
tvi_vladutz said:
I don't know... ?
Click to expand...
Click to collapse
Check it in developer options if you have enabled it
Emmykay223 said:
Check it in developer options if you have enabled it
Click to expand...
Click to collapse
Is not and it's greyed out, I can't enable.
tvi_vladutz said:
Is not and it's greyed out, I can't enable.
Click to expand...
Click to collapse
Can u upload screenshot here?
Sure
tvi_vladutz said:
Sure
Click to expand...
Click to collapse
I think they will fix it on new update hope soo
But what I can do about that error in the recovery?
tvi_vladutz said:
But what I can do about that error in the recovery?
Click to expand...
Click to collapse
I was talking about recovery error. Or else you should downgrade to oreo again.
Need the solution --- failed to find device partition on my Nokia 6 TA-1000
Kishor008 said:
Need the solution --- failed to find device partition on my Nokia 6 TA-1000
Click to expand...
Click to collapse
Backup your data and flash nb0 firmware via ost with check on erase data option.
sir my nokia 6 with TA-1021 is not opening or starting stucks on nokia logo and while opening hard reset option by volume buttons there a line written ( failed to find device for partion )