Grand Prime - Power when plugged in. - Galaxy Grand Prime Q&A, Help & Troubleshooting

Hey,i want to know if there's an app or something that can solve my problem. I let my phone charging ovrnight but when i plug it in it automatically boots,and i don't want that. I know that's a TWRP safe thingy where this should be the last solution when you screwed your physicals buttons..but how can i disable it? Thanks in advance.

Related

[Q] Samsung galaxy A5 (2017) not booting or charging

So I have Galaxy A5 2017 (SM-A520F) and it's not booting at all or charging. (is it fully hard bricked?)
I can't even boot it in safe mode and when connected PC isn't finding it so I can't flush factory ROM.
I really don't know how to fix it, and I tried almost everything.
Is there something to do?
P.S. Opening the phone is NOT the option
Thank you guys in advance
Hi. This sounds like a hard brick. No response to buttons, pc can't detect it. Unless it's not a faulty battery or some other internal component.
Take it to a samsung service center if you're still under warranty. Otherwise I would open it to measure voltage on battery if it's not possible from usb port.
May I ask how it got to this state in the first place?
Hey! Having the same problem. Does anyone know the solution?
P.S. Opening the phone is NOT the option
[SOLVED]

Possible brick. Fail with flashing TWRP.

Hello,
Today I flash TWRP for Oxynos devices on Snaprdagon S8. Yes, I know know that it was stupid. After that, there was a bootloop. After i recognize my fail, I force powered off the phone and wanted to flash correct TWRP, but my phone don't look bo alive anymore. It doesn't react on power + any other button configuratiom. Computer doesn't see the phone and LED is off all the time. Possible brick, I think.
Did anyone have this or similiar problem and have any sollution to this?
kajtek612 said:
Hello,
Today I flash TWRP for Oxynos devices on Snaprdagon S8+. Yes, I know know that it was stupid. After that, there was a bootloop. After i recognize my fail, I force powered off the phone and wanted to flash correct TWRP, but my phone don't look bo alive anymore. It doesn't react on power + any other button configuratiom. Computer doesn't see the phone and LED is off all the time. Possible brick, I think.
Did anyone have this or similiar problem and have any sollution to this?
Click to expand...
Click to collapse
I doubt anyone tried flashing exynos twrp on the snapdragon model.....why would you do that?
Can you get into download mode?
adj998 said:
I doubt anyone tried flashing exynos twrp on the snapdragon model.....why would you do that?
Can you get into download mode?
Click to expand...
Click to collapse
It was my mistake. My mind went off for a while. I knew that I have Snap version so I download Exynos TWRP
No, download mode doesn't work, computer doesn't recognize the phone, phone doesn't vibrate after pluging usb charger. Simply dead, brick.
As I read, the only thing that MIGHT help me is JTAG. Am I right?
kajtek612 said:
It was my mistake. My mind went off for a while. I knew that I have Snap version so I download Exynos TWRP
No, download mode doesn't work, computer doesn't recognize the phone, phone doesn't vibrate after pluging usb charger. Simply dead, brick.
As I read, the only thing that MIGHT help me is JTAG. Am I right?
Click to expand...
Click to collapse
I honestly don't know about that I'm sorry, what happens when you plug in the charger?
Come here and people will help you with your issue
https://discord.gg/VH4W435
adj998 said:
I honestly don't know about that I'm sorry, what happens when you plug in the charger?
Come here and people will help you with your issue
Click to expand...
Click to collapse
Unfortunately nothing happens. Any vibration. Any LED light. Only wireless charger change its color when I put the phone on it but phone doesnt react.

black screen after charging

hello all.
im using G950F, original everything, not rooted no tweaks..
I put it to charge at night and woke up to black screen.
tried volDn+pwr, volUp+bixby+pwr, volDn+bixby+pwr, volUp+pwr.. didnt help
when i connect usb to my computer i see no change at device manager :/
any idea if is there is possible action for me to do?
HellDad said:
hello all.
im using G950F, original everything, not rooted no tweaks..
I put it to charge at night and woke up to black screen.
tried volDn+pwr, volUp+bixby+pwr, volDn+bixby+pwr, volUp+pwr.. didnt help
when i connect usb to my computer i see no change at device manager :/
any idea if is there is possible action for me to do?
Click to expand...
Click to collapse
could you do something? Im on the same situations

No sense of life Grand Prime

badly need your help guys.
im flashing my phone back to stock rom using odin then i accidentally hooked up with the usb cable and it disconnects.
it stops from flashing and fail then phone shutsdown.
after that there's no any sense of life.
not charging, Can't access download mode and Factory mode.
What should i do?
is there any solution for this?
Thank you in advance.
rimarax said:
badly need your help guys.
im flashing my phone back to stock rom using odin then i accidentally hooked up with the usb cable and it disconnects.
it stops from flashing and fail then phone shutsdown.
after that there's no any sense of life.
not charging, Can't access download mode and Factory mode.
What should i do?
is there any solution for this?
Thank you in advance.
Click to expand...
Click to collapse
this is might be hardware problem seem like my old problem with ic power

My tablet Galaxy tab 2 10.1" doesn't start after fail to root

Hi all
Recently I had tried to root my Galaxy tab 2 GT-P5100, but I turned off in the middle of rooting process. So, after this my tablet doesn't start anymore, without show any logo of inicialization and is not possible to enter in the recovery process.
I think that the incomplet process of rooting broked the firmwares or something like that.
Are there solutions to fix this problem?
I was thinking on re-instalation of firmwares, but I'm not shure if it's possible.
Thanks, Willian
willian.pacheco said:
Hi all
Recently I had tried to root my Galaxy tab 2 GT-P5100, but I turned off in the middle of rooting process. So, after this my tablet doesn't start anymore, without show any logo of inicialization and is not possible to enter in the recovery process.
I think that the incomplet process of rooting broked the firmwares or something like that.
Are there solutions to fix this problem?
I was thinking on re-instalation of firmwares, but I'm not shure if it's possible.
Thanks, Willian
Click to expand...
Click to collapse
Can you get it to boot into download mode? Power and volume up??? Or is it volume down.... anyways, if you can get in download mode, odin can flash firmware.
champ1919 said:
Can you get it to boot into download mode? Power and volume up??? Or is it volume down.... anyways, if you can get in download mode, odin can flash firmware.
Click to expand...
Click to collapse
Hi champ191
I tried it several times without success
Thanks, Willian
So u cannot do anything with your tab?
Can't even boot it/can't go to any recovery?
Mithil17 said:
So u cannot do anything with your tab?
Can't even boot it/can't go to any recovery?
Click to expand...
Click to collapse
Hi Mithil17
I can't see or do anything on the screen.
The battery is full charged, and also I can't see the logo of battery charging.
Thanks, Willian
willian.pacheco said:
Hi Mithil17
I can't see or do anything on the screen.
The battery is full charged, and also I can't see the logo of battery charging.
Thanks, Willian
Click to expand...
Click to collapse
If u cannot see any charging signs or stuff how do u know its fully charged?
Mithil17 said:
If u cannot see any charging signs or stuff how do u know its fully charged?
Click to expand...
Click to collapse
Hi Mithil17
Because before the system corruption the battery was fully charged.
willian.pacheco said:
Hi all
Recently I had tried to root my Galaxy tab 2 GT-P5100, but I turned off in the middle of rooting process. So, after this my tablet doesn't start anymore, without show any logo of inicialization and is not possible to enter in the recovery process.
I think that the incomplet process of rooting broked the firmwares or something like that.
Are there solutions to fix this problem?
I was thinking on re-instalation of firmwares, but I'm not shure if it's possible.
Thanks, Willian
Click to expand...
Click to collapse
Which tool did you use to root the device?
willian.pacheco said:
Hi Mithil17
Because before the system corruption the battery was fully charged.
Click to expand...
Click to collapse
Oh no this dosent seem good
Can your pc detect the tab when connected?
can u enter any mode(like download/recovery)
aat596 said:
Which tool did you use to root the device?
Click to expand...
Click to collapse
Hi aat596
I tried with Odin.
Mithil17 said:
Oh no this dosent seem good
Can your pc detect the tab when connected?
can u enter any mode(like download/recovery)
Click to expand...
Click to collapse
Hi Mithil17
I had tried to do hard reset (disconnect battery for a time to empty the system), but with the same result.
Yeah, my PC recognize the tablet, but I don't know if is possible to mount it in my PC.
Note, I tried it on Windows and I'm a itermmediate Linux user.
One thing that I don't know if it's possible: change the usb port permission of my computer and try the firmwares/ROM reinstallation. So, just something in my head.
Best regards, Willian
willian.pacheco said:
Hi aat596
I tried with Odin.
Click to expand...
Click to collapse
Oops I think I malformed the question: what I meant is what were you flashing to root your device? Magisk?
---------- Post added at 01:43 AM ---------- Previous post was at 01:35 AM ----------
willian.pacheco said:
Hi Mithil17
I had tried to do hard reset (disconnect battery for a time to empty the system), but with the same result.
Yeah, my PC recognize the tablet, but I don't know if is possible to mount it in my PC.
Note, I tried it on Windows and I'm a itermmediate Linux user.
One thing that I don't know if it's possible: change the usb port permission of my computer and try the firmwares/ROM reinstallation. So, just something in my head.
Best regards, Willian
Click to expand...
Click to collapse
Have you tried to drain ** completely ** your battery (a few days can pass) and then charging it to full 100%?
willian.pacheco said:
Hi Mithil17
I had tried to do hard reset (disconnect battery for a time to empty the system), but with the same result.
Yeah, my PC recognize the tablet, but I don't know if is possible to mount it in my PC.
Note, I tried it on Windows and I'm a itermmediate Linux user.
One thing that I don't know if it's possible: change the usb port permission of my computer and try the firmwares/ROM reinstallation. So, just something in my head.
Best regards, Willian
Click to expand...
Click to collapse
U can use adb commands ig just google it if it helps

Categories

Resources