Hi, i had stock ROM and everything was working perfectly. I flashed Custom ROM and my WiFi now doesn't turn on. If i flash back to stock it works, but i want to have a custom one. I tried Zapryanov ROM and just a deodoxed ROM, both have the same issue. I just need to fix this issue ASAP!
Phone - Galaxy Grand Prime - SM-G530FZ
I heard it could be because of the Modem / Baseband and i should flash a new one, but where could i find one.
I might be wrong^^
I just need to fix this!
THANKS, Aqua!
same problem
I have the same issue but with grand prime plus G532M
RBAquaa said:
Hi, i had stock ROM and everything was working perfectly. I flashed Custom ROM and my WiFi now doesn't turn on. If i flash back to stock it works, but i want to have a custom one. I tried Zapryanov ROM and just a deodoxed ROM, both have the same issue. I just need to fix this issue ASAP!
Phone - Galaxy Grand Prime - SM-G530FZ
I heard it could be because of the Modem / Baseband and i should flash a new one, but where could i find one.
I might be wrong^^
I just need to fix this!
THANKS, Aqua!
Click to expand...
Click to collapse
Replace your /system/lib/modules/pronto/pronto_wlan.ko with this one
https://drive.google.com/file/d/0B6H2MAe2jT53WDdwOG1XTU9VRkk/view?usp=drivesdk
Sent from my Samsung SM-G530FZ using XDA Labs
Related
Hi good day I flashed sixperience v7.0 with my samsung galaxy s5 g900f but unfortunately my sim card is detected but the signal is turning into "NO ENTRY SIGN" The circle with slash and mobile network error always when dialing to check for the network. Please help me I tried to read the thread of sixperience but I do not know how can I fix it. Thank you in advance.
try factory reset if not work flash stock rom via odin, if the problem will still occur, you will have to give it to repair.....
SOLVED!
Thank you. I solved the issue already. ~CLOSED~
how did you slove it ?
Moncef363 said:
how did you slove it ?
Click to expand...
Click to collapse
hi there buddy. My problem is the bootloader I am using kitkat version of S5 before I flashed the sixperience which is not a proper way on flashing this rom so then I flash may s5 to a stock and latest version of lolipop then flash the sixperience ROM and it pretty works on me. What is the issue on your unit I can help you with it.
ginofakes said:
hi there buddy. My problem is the bootloader I am using kitkat version of S5 before I flashed the sixperience which is not a proper way on flashing this rom so then I flash may s5 to a stock and latest version of lolipop then flash the sixperience ROM and it pretty works on me. What is the issue on your unit I can help you with it.
Click to expand...
Click to collapse
Hi there, could you give us the links for the bootloader please
because I tried to download them and everytime I flash them the problem doesn't fix
Moncef363 said:
how did you slove it ?
Click to expand...
Click to collapse
AdnanDJ said:
Hi there, could you give us the links for the bootloader please
because I tried to download them and everytime I flash them the problem doesn't fix
Click to expand...
Click to collapse
Hi I am sorry but I just flashed the whole firmware of BOH4 to get the bootloader for me. I found it on sammobile it's about 1.5gb I guess.
Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.
Download Stock firmware from sammobile for your phone and flash it with ODIN.
dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.
dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?
Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom
Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>
Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?
Hi All..
My friend is using S4 i9500 model..
Before We flashed a chinese Lolipop firmware to it including Pit..
And now we flashed official Firmware of my Country including pit file i found it on Internet..
Its Freezing and not running well on Official Rom and wifi is continuously Disconnecting and reconnecting to my modem..
I decided to flash another Rom
So i picked and flashed alot of roms based on 5.1.1 and 5.0.2 to s4..
I'm running Tyagi rom its quite fast but same wifi connect and disconnect issue..
I want help to solve this...
Please tell me what i do.?
Did the phone work properly before flashing? Is it possible to flash back to the phone's original ROM?
audit13 said:
Did the phone work properly before flashing? Is it possible to flash back to the phone's original ROM?
Click to expand...
Click to collapse
Its works perfectly before official Firmware i flashed..
Not there Is no way to go back
Any Solution.?
Hello,
I have recently replaced the motherboard on my N910C with N910F (because it was the only one that I could find at that moment). I had to replace the camera as well because they are not compatible. I got my motherboard from Aliexpress, and it seems to be working fine. It came with some preinstalled software that was running Android 5.0.1. on PHE CSC which seems to be Spanish software. I flashed the latest Marshmallow 6.0.1. from Sammobile and its working great. But I wanted to flash Astra Dream UX ROM v.40F so I rooted the device, flashed TWRP and put the ROM on SD card, wiped everyhting (I have flashed roms before on my S4) and after successful installation, what happens is that phone constantly reboots after Samsung splash screen. It managed to get to boot animation first time after flashing, but after that, any Custom ROM that I flash installs without issues, but doesn't go further than Splash screen logo. I have tried 3 or 4 TWRP versions, but none of them seems to fix the issue. So I reflashed stock ROM using Odin and now its working fine. Any suggestion what might be the issue?
Mirsaneli said:
Hello,
I have recently replaced the motherboard on my N910C with N910F (because it was the only one that I could find at that moment). I had to replace the camera as well because they are not compatible. I got my motherboard from Aliexpress, and it seems to be working fine. It came with some preinstalled software that was running Android 5.0.1. on PHE CSC which seems to be Spanish software. I flashed the latest Marshmallow 6.0.1. from Sammobile and its working great. But I wanted to flash Astra Dream UX ROM v.40F so I rooted the device, flashed TWRP and put the ROM on SD card, wiped everyhting (I have flashed roms before on my S4) and after successful installation, what happens is that phone constantly reboots after Samsung splash screen. It managed to get to boot animation first time after flashing, but after that, any Custom ROM that I flash installs without issues, but doesn't go further than Splash screen logo. I have tried 3 or 4 TWRP versions, but none of them seems to fix the issue. So I reflashed stock ROM using Odin and now its working fine. Any suggestion what might be the issue?
Click to expand...
Click to collapse
For some reason v4 of that rom won't boot for anyone without having to flash another kernel. Also, I've heard that dirty flashing over v3 works too, but I did the kernel change when I used it.
But I also flashed Nemesis N7 port v3.0 and Aurora Note 5 port v7.0, none of them booted. I used kernels provided with the ROMs.
As said previous, try to flash another kernel after flashing the ROM. You have ramkernel or flashpoint that I know of for custom ported roms.
Isaac_T said:
As said previous, try to flash another kernel after flashing the ROM. You have ramkernel or flashpoint that I know of for custom ported roms.
Click to expand...
Click to collapse
Thanks, I will try.
I have a galaxy note 4 exynos n910u (treltexx) with stock rom (6.0) everything works fine so i decided to install custom rom. First it was hard to find the rom for it after i found few i flashed one.
RR with twrp 3.3 after flashing phone was working like usual but when i interted the sim card it did not detect it so i tought it might be the rom what causing it then i flashed the stock with odin and sim was working fine so i flashed lineage same issue again evwn then i tought it was rom but no matter rom i try sim was not getting detected (exept stock) .
Thing i notice was there was no imei number after dialing *#06#*
So i found the new rom Note 7FE edition android 7 i gave it a try same thing no sim detected but this time i was getting IMEI number
Also my phone is N910U and showed Spark nz logo at boot and i'm in india but sim works fine on stock get 4g and everything and also when i install any rom it say N910C ony Note 7FE edition one said N910U
Is there any way to fix this issue
Any help will be appreciated
Thanks in advance
Honeys559 said:
I have a galaxy note 4 exynos n910u (treltexx) with stock rom (6.0) everything works fine so i decided to install custom rom. First it was hard to find the rom for it after i found few i flashed one.
RR with twrp 3.3 after flashing phone was working like usual but when i interted the sim card it did not detect it so i tought it might be the rom what causing it then i flashed the stock with odin and sim was working fine so i flashed lineage same issue again evwn then i tought it was rom but no matter rom i try sim was not getting detected (exept stock) .
Thing i notice was there was no imei number after dialing *#06#*
So i found the new rom Note 7FE edition android 7 i gave it a try same thing no sim detected but this time i was getting IMEI number
Also my phone is N910U and showed Spark nz logo at boot and i'm in india but sim works fine on stock get 4g and everything and also when i install any rom it say N910C ony Note 7FE edition one said N910U
Is there any way to fix this issue
Any help will be appreciated
Thanks in advance
Click to expand...
Click to collapse
I wrote to you on the telegram channel also - the 910U has a weird modem (Intel) which has issues with the RIL (radio layer interface).
Also the developer has no phone note 4 910U so that he can test it and get logs to see errors.
As for all the peeps with this model - "It is what it is" - deal with it.
Honeys559 said:
I have a galaxy note 4 exynos n910u (treltexx) with stock rom (6.0) everything works fine so i decided to install custom rom. First it was hard to find the rom for it after i found few i flashed one.
RR with twrp 3.3 after flashing phone was working like usual but when i interted the sim card it did not detect it so i tought it might be the rom what causing it then i flashed the stock with odin and sim was working fine so i flashed lineage same issue again evwn then i tought it was rom but no matter rom i try sim was not getting detected (exept stock) .
Thing i notice was there was no imei number after dialing *#06#*
So i found the new rom Note 7FE edition android 7 i gave it a try same thing no sim detected but this time i was getting IMEI number
Also my phone is N910U and showed Spark nz logo at boot and i'm in india but sim works fine on stock get 4g and everything and also when i install any rom it say N910C ony Note 7FE edition one said N910U
Is there any way to fix this issue
Any help will be appreciated
Thanks in advance
Click to expand...
Click to collapse
I'm not sure if this will work but you have a backup of your stock roms modem partition you could yry dirty flashing it to your custom rom. You could also use a root file manager and copy your stock roms csc files and place the in a flashable .zip and dirty flash that to your custom rom.
Mr. JAVI said:
I'm not sure if this will work but you have a backup of your stock roms modem partition you could yry dirty flashing it to your custom rom. You could also use a root file manager and copy your stock roms csc files and place the in a flashable .zip and dirty flash that to your custom rom.
Click to expand...
Click to collapse
I will try it and report back if it work.
GRX Touchwis V8 for stock roms.
https://www.google.com/amp/s/apkqui...chwiz-mod-v8-apk-for-any-samsung-android/amp/
Mr. JAVI said:
GRX Touchwis V8 for stock roms.
https://www.google.com/amp/s/apkqui...chwiz-mod-v8-apk-for-any-samsung-android/amp/
Click to expand...
Click to collapse
Wrong. Only custom rom with root access.
w41ru5 said:
Wrong. Only custom rom with root access.
Click to expand...
Click to collapse
Opps , I mean rooted stock roms. I've noticed conflicts with custom roms if the rom manager has the same settings as GRX.
n910u is trhplte
Mr. JAVI said:
I'm not sure if this will work but you have a backup of your stock roms modem partition you could yry dirty flashing it to your custom rom. You could also use a root file manager and copy your stock roms csc files and place the in a flashable .zip and dirty flash that to your custom rom.
Click to expand...
Click to collapse
I gave it a try it didn't work .
Thanks for the effort though..
Honeys559 said:
I gave it a try it didn't work .8
Thanks for the effort though..
Click to expand...
Click to collapse
Your welcome, I was hoping it would have worked
Did you try creating a .zip with your working csc's and flash that in twrp as well?
Mr. JAVI said:
Your welcome, I was hoping it would have worked
Did you try creating a .zip with your working csc's and flash that in twrp as well?
Click to expand...
Click to collapse
Yes i did that too. Didn't work as well.