hi
Sorry for my English
I wanted to root my phone but made a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader
nobody knows how to help me?
It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?
same problem
i have the same problem and the same brick. Can anyone help us?:crying:
+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!
St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.
ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?
One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.
I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's
First, Sorry abut my English
so this it my sad story:crying:…
after i rooted my device and tried to flash twrp recovery via (flashify.apk)
i got soft brick then i tried to fix it by this guide:
http://forum.xda-developers.com/showthread.php?t=2582142
maybe I did something wrong
so then the light screen device shutdown
now my phone not start and no screen light
but When I Plug it into windows 7 .It first time detect to qhsusb_bulk
and this download driver qualcomm hs-usb diagnostics 9008
so someone can plz help me to fix it ???
I buy it just one week ago :crying::crying:
k860i said:
First, Sorry abut my English
so this it my sad story:crying:…
after i rooted my device and tried to flash twrp recovery via (flashify.apk)
i got soft brick then i tried to fix it by this guide:
http://forum.xda-developers.com/showthread.php?t=2582142
maybe I did something wrong
so then the light screen device shutdown
now my phone not start and no screen light
but When I Plug it into windows 7 .It first time detect to qhsusb_bulk
and this download driver qualcomm hs-usb diagnostics 9008
so someone can plz help me to fix it ???
I buy it just one week ago :crying::crying:
Click to expand...
Click to collapse
Get on IRC on the Freenode network and join #lg-g2 If you don't have an IRC client, http://webchat.freenode.net/ will work.
Someone there can help you, but you'll have to be patient, not everyone is around all of the time.
Someone can help me please ??
Friend did it solve?
First I want to greet all the members of the forum. Congratulations.
My problem is the following:
While writing a text message with my cellullare I9505 is off and you are no longer on again, looking at the battery, I realized that it was slightly swollen and I replaced it.
But unfortunately the phone does not start and is recognized by the PC as Qualcomm HS-USB QDLoader 9008 even without the battery.
Doing a bit of research and THANKS to your forum I found that unfortunately the phone went HARDBRICK.
Reading I discovered that something could be done without equipment with QPST tools. The problem that I can not find the files for my phone model. In order:
- sahara.xml
-MPRG ... mbn
-xxx_msimage.mbn
I found the file but when I put them inside the device is not recognized.
Please give me a hand?
En I'd really appreciate it.
Best regards
hello. please send me the files at [email protected]
my gt i9505 is hard bricked,detected as dload 9008
Guyz i have LG G2 PRO D838 which i hard bricked during flashing wrong twrp D802_AutoRec.apk after that my phone bricked i tried so many thing searching online but nothing helps i think i miss little things during process,
My lg g2 pro is only detected as ANDROID ADB INTERFACE in device manager i tried so many drivers qualcomm drivers lg drivers PdaNetA4183.exe but nothing helps i saw threads saying shorting some chips in motherboard to force the phone to go in QHSUSB BULK MODE IN DEVICE MANAGER but i really dont know which and how so did nothing please guys some help will be appricated.
lg g2 d802 hard bricked black screen only display no logo or download mode
raoul-zain said:
Guyz i have LG G2 PRO D838 which i hard bricked during flashing wrong twrp D802_AutoRec.apk after that my phone bricked i tried so many thing searching online but nothing helps i think i miss little things during process,
My lg g2 pro is only detected as ANDROID ADB INTERFACE in device manager i tried so many drivers qualcomm drivers lg drivers PdaNetA4183.exe but nothing helps i saw threads saying shorting some chips in motherboard to force the phone to go in QHSUSB BULK MODE IN DEVICE MANAGER but i really dont know which and how so did nothing please guys some help will be appricated.
Click to expand...
Click to collapse
i have the same problem after installing the same apk autorec.apk
i cant access download mode and screen stays dark after switching onn. no logo display only balck screen
Hi everyone, i have a G2(D802) which i have used for 5 years. Yesterday, when i turn off the screen then try to turn on it didn't. I tried to reset with holding power button like 20-25 seconds. It stucked at LG logo. After many reset nothing happened. Then this morning i could was able to open my phone, so i thought it was a problem about software things, so i backuped everything and change my rom(i was using Lineage 14.1 ) to Resurrection Remix. But same thing happened, when i turn off the screen it has gone again. So i decided to install stock rom back. But this time when i used Flash Tool 2014 and appropriate KDZ, it stacked at 4%, after trying different cables, ports,windows 7/xp and programs (like LG Mobile Support Tool, LG Up) in Device Manager it seemed as : "qualcomm hs-usb qdloader 9006" and no recovery mode no download mode, when i google this problem i found it named with "qhsusb_bulk" and i found this article and successfully recover download mode. Now in Device Manager it seems as "LGE AndroidNet USB Serial Port".
TLDR: I can only open download mode, no recovery, it stacked LG logo, when i use Flash Tool 2014 or LG Mobile Support Tool with different KDZ/TOT it stacked at 4%. What should i do? What's wrong with my phone? I need your help urgently because i have no other phone. Thank you for reading.
metobayrak said:
Hi everyone, i have a G2(D802) which i have used for 5 years. Yesterday, when i turn off the screen then try to turn on it didn't. I tried to reset with holding power button like 20-25 seconds. It stucked at LG logo. After many reset nothing happened. Then this morning i could was able to open my phone, so i thought it was a problem about software things, so i backuped everything and change my rom(i was using Lineage 14.1 ) to Resurrection Remix. But same thing happened, when i turn off the screen it has gone again. So i decided to install stock rom back. But this time when i used Flash Tool 2014 and appropriate KDZ, it stacked at 4%, after trying different cables, ports,windows 7/xp and programs (like LG Mobile Support Tool, LG Up) in Device Manager it seemed as : "qualcomm hs-usb qdloader 9006" and no recovery mode no download mode, when i google this problem i found it named with "qhsusb_bulk" and i found this article and successfully recover download mode. Now in Device Manager it seems as "LGE AndroidNet USB Serial Port".
TLDR: I can only open download mode, no recovery, it stacked LG logo, when i use Flash Tool 2014 or LG Mobile Support Tool with different KDZ/TOT it stacked at 4%. What should i do? What's wrong with my phone? I need your help urgently because i have no other phone. Thank you for reading.
Click to expand...
Click to collapse
hi there.. unfortunately LG did a mess in my opinion! After buying G2 and G Pad I will never buy LG again because of this..
anyway, assuming you're doing everything as described into the guides (like port COM 41, copy the right DLL file etc) there is one thing I would try in your situation: trying with a different PC, in particular a Windows 7 / XP one..
also I read that sometimes this issues was randomly gone after trying and trying and trying and trying and trying..! If available I would also try different KDZ firmware (but be sure it's for your model.. as long as it is it doesn't matter if it's JB, KK or LP)
brainvision said:
hi there.. unfortunately LG did a mess in my opinion! After buying G2 and G Pad I will never buy LG again because of this..
anyway, assuming you're doing everything as described into the guides (like port COM 41, copy the right DLL file etc) there is one thing I would try in your situation: trying with a different PC, in particular a Windows 7 / XP one..
also I read that sometimes this issues was randomly gone after trying and trying and trying and trying and trying..! If available I would also try different KDZ firmware (but be sure it's for your model.. as long as it is it doesn't matter if it's JB, KK or LP)
Click to expand...
Click to collapse
Thank you for your suggestion, after several hundred attempts i successfully go back to stock rom(an Indian stock rom which i found it in storagecow link), but the problem is; when i turn off the screen, i can not open again, and it restarts and stuck at lg logo. After hundred times reset, phone started normally, then i flash a twrp recovery (with autorec) and go recovery. This time twrp said Unable to Mount System,Storage etc. so twrp shows internal storage: 0mb and all folders(data,sdcard,system etc.) empty. I mean define this problem is very hard and i think it is very rare problem. I'm not sure which part of the phone is the problem. I don't know is this a hardware problem or a software(like wrong partition or something like that) problem.
metobayrak said:
Thank you for your suggestion, after several hundred attempts i successfully go back to stock rom(an Indian stock rom which i found it in storagecow link), but the problem is; when i turn off the screen, i can not open again, and it restarts and stuck at lg logo. After hundred times reset, phone started normally, then i flash a twrp recovery (with autorec) and go recovery. This time twrp said Unable to Mount System,Storage etc. so twrp shows internal storage: 0mb and all folders(data,sdcard,system etc.) empty. I mean define this problem is very hard and i think it is very rare problem. I'm not sure which part of the phone is the problem. I don't know is this a hardware problem or a software(like wrong partition or something like that) problem.
Click to expand...
Click to collapse
so ROM is flashed but no files are anywhere? Did the same happens when you browse the device with the windows command Prompt / Linux Terminal?
Yea anyway weird, maybe you can see if this tool has original partitions for your model: https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 - please pay attention if you do it and backup the partitions you have atm before
brainvision said:
so ROM is flashed but no files are anywhere? Did the same happens when you browse the device with the windows command Prompt / Linux Terminal?
Yea anyway weird, maybe you can see if this tool has original partitions for your model: https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 - please pay attention if you do it and backup the partitions you have atm before
Click to expand...
Click to collapse
I used this tool when my phone showed in Device Manager as : "qualcomm hs-usb qdloader 9006" and it worked, today when i opened my phone(after install stock rom again) i kept the screen always open. After 5 minutes, suddenly screen gone and stuck at lg logo. Now I think that the problem is definitely hardware. Because i did nothing and phone was connected with a cable to my pc. If the solution is to change a part(like the processor) inside the phone, I will write here what the problem part is. Thank you again.
metobayrak said:
I use this tool when my phone showed in Device Manager as : "qualcomm hs-usb qdloader 9006" and it worked, today when i open my phone(after install stock rom again) i kept the screen always open. After 5 minutes, suddenly screen gone and stuck at lg logo. Now I think that the problem is definitely hardware. Because i did nothing and phone was connected with a cable to my pc. If the solution is to change a part(like the processor) inside the phone, I will write here what the problem part is. Thank you again.
Click to expand...
Click to collapse
pretty sure it's the mainboard, I saw it's the first part of the G2 that gives problem after a while
brainvision said:
pretty sure it's the mainboard, I saw it's the first part of the G2 that gives problem after a while
Click to expand...
Click to collapse
I found the problem part. It's the eMMC chip. I disassemblied the phone and heat the relevant chip (on my motherboard the chip named as Toshiba) with hot air gun. My phone worked properly for 1 minute, then gone again.
metobayrak said:
I found the problem part. It's the eMMC chip. I disassemblied the phone and heat the relevant chip (on my motherboard the chip named as Toshiba) with hot air gun. My phone worked properly for 1 minute, then gone again.
Click to expand...
Click to collapse
you know what: I think my device has the same issue, eMMC is damaged.. I'm not using the G2 as primary or secondary device anymore but from time to time I like to flash something and using it.. but it's almost one year that when stuff I have no error but when I boot the device and start using it I have random reboots.. but they are totally random and almost happen when installing one app, using a system app or something like that. it happens with both stock firmware both with custom ROMs.. basically I have to flash and using the device for a day and if I have less then two reboots in that period I go on..
I'm not an expert about hardware matters, do you mind linking me a video on YouTube about what have you done with the airgun? Also I tried to search for spare eMMC but I wasn't able to find any (some time ago) so the option would be to change the motherboard.. did you find something instead?
brainvision said:
you know what: I think my device has the same issue, eMMC is damaged.. I'm not using the G2 as primary or secondary device anymore but from time to time I like to flash something and using it.. but it's almost one year that when stuff I have no error but when I boot the device and start using it I have random reboots.. but they are totally random and almost happen when installing one app, using a system app or something like that. it happens with both stock firmware both with custom ROMs.. basically I have to flash and using the device for a day and if I have less then two reboots in that period I go on..
I'm not an expert about hardware matters, do you mind linking me a video on YouTube about what have you done with the airgun? Also I tried to search for spare eMMC but I wasn't able to find any (some time ago) so the option would be to change the motherboard.. did you find something instead?
Click to expand...
Click to collapse
This is the video I get help with: https://www.youtube.com/watch?v=ft8V5yrQFic
this guy did this for g3 but doing for g2 also works. This is definitely a temporary solution. It works maybe just 1 minute (like me) or 1 hour if you are lucky maybe 1 month. Changing motherboard is primary solution but it is expensive and worthless. I think that is chronic problem for LG G series. There is no proper heat dissipation on the motherboard. They have just put thin metal plates. Maybe you can try after the heating process, just put a thermal pads the relevant chipsets. You can see from this video: https://www.youtube.com/watch?v=HMdvG6w7etU
metobayrak said:
This is the video I get help with: https://www.youtube.com/watch?v=ft8V5yrQFic
this guy did this for g3 but doing for g2 also works. This is definitely a temporary solution. It works maybe just 1 minute (like me) or 1 hour if you are lucky maybe 1 month. Changing motherboard is primary solution but it is expensive and worthless. I think that is chronic problem for LG G series. There is no proper heat dissipation on the motherboard. They have just put thin metal plates. Maybe you can try after the heating process, just put a thermal pads the relevant chipsets. You can see from this video: https://www.youtube.com/watch?v=HMdvG6w7etU
Click to expand...
Click to collapse
I thought about applying something (couldn't imagine what however) on the internal back of the cover but not because of the issues I have but simply because the device get hot very soon! I'
But basically you are saying that this issue related to the eMMC is not because the chip is damaged but only for the temperature it reaches?
brainvision said:
I thought about applying something (couldn't imagine what however) on the internal back of the cover but not because of the issues I have but simply because the device get hot very soon! I'
But basically you are saying that this issue related to the eMMC is not because the chip is damaged but only for the temperature it reaches?
Click to expand...
Click to collapse
Yes, because of the eMMC chip is damaged. But the crux of the problem is processor heats and cause of no proper heat dissipation this damages other chipsets. Thermal pad solution must be done after chip replacement.