Database Users

For All sdcard issues

09/01/2012:
this tutorial may work for those who are having encryption issues on ics or jb roms (the error is related to mmcblk0p2(data))
well, after some months of work, here´s an tutorial about how to fix the mostly common sdcard issues.
1º Of all :***Be sure of what you´re doing,or else you can corrupt the partition table of you sdcard/brick your phone,and I´ll not be responsible of it***
2º-Do Not send me PMs, post here so everyone that have the same problem can now how to fix it.
3º-If you are an starter, you can post here your questions,but be sure that you haven´t found answers on Google or other threads.
and 4º-Read ALL topic before start and try one solution than the other,they´re in order of difficulty and risk of get an "permanent" brick.
0 - Always backup your EFS folder, maybe its not related to this thread but it´s also very important to remember.
I -If you have a folder called "voodoo" in your sdcard, you may have voodoo enabled on your ROM, so be sure of disabling it before trying a new rom or a stock rom.
if you´re on another rom already and having problems in mounting partitions, try to flash you last rom or a kernel that supports voodoo and it´s compatible with your new rom.
II-If you´re getting problems in mounting DBDATA,Download a full rom that contains DBDATA to flash with odin(or only flash dbdata,but you´ll have to do a full wipe later). To see if it haves dbdata.rfs by opening your .tar file in 7zip or others.
III-If you´re getting Can´t mount data (dev/block/mmcblkl0p2) File exists, try to flash an kernel with voodoo suport,if it still the same, format data in the menu of your recovery.
IV-If you´re getting can´t mount sdcard (/dev/block/mmcblk0p1)File exists, try to access it via ADB and send pull file command to recover your files(must have root),if you could do that, so try to format it via recovery.If not work,Download gparted, burn it on cd (it´s an CD with a tool of linux) and go to ADB shell to run this command:
su
echo /dev/block/mmcblk0 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
now
reboot your PC in gparted and format mmcblk0p1(it´s the first partition) in FAT32.
Done
V-If you´re getting cant mount sdcard (/dev/block/mmcblk0p1) with (invalid argument) You can try the fix IV and see if it works,if not, proceed to VI.
VI-If you´re getting cant mount data(dev/block/mmcblk0p2) or can´t mount sdcard (/dev/block/mmcblk0p1) with (invalid argument) or (no such file or directory) you may have to do this:
***search on google for 'fdisk' commands first***
You MUST*¹ remake your partition table manually,so the phone have the /data partition back to boot.
*¹
In some cases you can use gparted to do this, without doing it manually,
you shoud only mount mmcblk0 before.
you can run this command line on adb shell to mount it:
echo /dev/block/mmcblk0 > /sys/devices/platform/s3c-usbgadget/gadget/lun1/file
You Will have to format it and it MUST have the partitions as said below.
YOU SDCARD MUST HAVE THE FOLLOWING PARTITION TO BOOT ON AND RECOGNIZE INTERNAL SDCARD:
/dev/block/mmcblk0p1
AND
/dev/block/mmcblk0p2
Start:
Open ADB,comnect your phone and proceed.
run adb shell
su
fdisk /dev/block/mmcblk0
p (you should see your partition table,POST HERE BEFORE CONTINUING)
YOU ARE NOW ABOUT TO REMAKE YOUR PARTITIONS:
partition 1 will correspond to mmcblk0p1(SDcard) and partition 2 will correspond to mmcblk0p2 (DATA)
**DO ONLY AS I SAY HERE, UNLESS YOU MAY GOT I/O ERROR ON YOUR SDCARD AND ITS ALL OVER. I say because it happened to me and i had to dissolder the internal sdcard an use only the external.**
**********IF YOU DONT HAVE ANY IDEA OF LINUX COMANDS: DO NOT PROCEED !!!!!!!!!*************
tap on adb:
n (will create a new partition)
1 (partition number)
press enter on keyboard so it selects the first block
get a calculator and estimate the size of the partition 1.IT MUST HAVE around 2GB left.
write the block number you got in calculator(BE SURE OF WHAT YOU TAPE HERE)
t
b (partition 1 is done and formatted as fat 32)
Now again:
n
2
enter on keyboard
enter again so it select the last block
(DO NOT TYPE COMMAND "T" FOR PARTITION 2, IT BY DEFAULT SET TO LINUX EXT FORMAT)
p (you will see you new partition table)
****IT MUST HAVE 2 partitions, partition 1 is in fat 32 format and partition 2 is in linux format(AND MUST HAVE AROUND 2GB)****
w (IT WILL WRITE YOU NEW PARTITION TABLE ON YOU SDCARD,SO BE SURE IT's ALL CORRECT)
Done,
now tap:
q
fdisk /dev/block/mmcblk0
p (you should see your new partition table, if ok reboot your phone, flash an stock rom for vibrant (I sugest an T959UVJFD ROM only to correctly format your partitions),root it,backup it,and enjoy,You can put a custom rom if you want so.)
If You have an error That does not appear here and you think it may me related to you sdcard just ask. In one or two days I or others developers may post here a possible solution.
Thanks For Google and some XDA users who indirectly helped me doing this.
You can try Paragon Hard Disk Manager in place of gparted
but remember: mmcblk0p1 is FAT32 and mmcblk0p2 in EXT2 (in truth it´s not EXT2, its in rfs, but the stock rom T959UVJFD is the only that I have absolute sure that will do the conversion).
Sorry for my bad english, it´s not my native language.

Great post doiiido!
Hay doiiido, you have been thanked and this post has been added to the [REF][KERNEL] ✰ The Official Vibrant Kernel ßible Thread ✰ → 07/05/12.
Great post!

News
Original pos by: ferhanmm
link to it:
http://forum.xda-developers.com/showthread.php?t=1665123
[FIX] Data wipe error or Can't mount /dev/block/mmcblk0p1
Data wipe error, Can't mount /dev/block/mmcblk0p1, or Vibrant screen boot loop even after flashing stock odin JFD phone will not boot. Phone will only boot Eugenes JK2 but internal and external storage will still list as corrupted and Lists 0.00 MB in storage.
Internal storage has been destroyed, I’ve been able to fix a phone using this technique to be mostly working. The external SD card will always have to be in the phone for this to work.
1. Partitioning the MicroSD Card
Get an 8gb(or larger) micro sd card. Class 10 would be better here. Put it into a Card Reader, then run Gparted.
Gparted (usb method is easiest) - http://gparted.sourceforge.net/liveusb.php
Using Gparted, delete everything else and create 2 partitions and :
6000mb FAT32 as PRIMARY
1607mb(remainder) Reiser as PRIMARY
2. Flash to Stock
Open up Odin flash stock JFD with pit file and repartition checked.
After phone boots completely, power off.
3. Flashing CM9
Take MicroSD out of phone an put it in pc, then copy update.zip, GAPPS, Cyanogenmod Rom all to the FAT32 partition that we created earlier. In Windows it should show up where all of your drives are listed in.
update.zip (https://www.dropbox.com/s/ju5eg5ernxcaqpt/update.zip),
GAPPS (http://www.goo-inside.me/gapps/gapps...317-signed.zip)
CyanogenMod Rom Zip(http://download.cyanogenmod.com/get/...mtd-signed.zip)
Enter recovery mode with volume buttons and power.
Reinstall packages twice.
Install zip from sd card select update-cm-9-20120520-nightly-vibrantmtd-signed.zip phone will boot loop on vibrant screen so take out the battery then enter recovery a second time installing the cm9 update again.
Then flash Gapps zip the same way.
When phone boots up camera, and gallery will not work until the next step.
4. Edit Vold.Stab file
Downlad ES File Explorer from play store.
Hit Menu button, settings, Check box for Root Explorer, Check box for mount file system, check box for Up to Root
Press Up once, you should now be at "/"
Open system directory, open etc directory, scroll to bottom and select Vol.fstab, select Text, Select ES Note Editor, update text to the following:
#internal sdcard dev_mount emmc /mnt/sdcard 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
#external sdcard dev_mount sdcard /mnt/emmc auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
After edits, click back and click yes to save changes. Exit out of es file explorer and restart phone. Post results:
Should work with any version of CM9, newer nightlies would obviously be preferred. Will make more detailed guide soon.
Credit to these guys for providing the solution -
http://www.youtube.com/watch?v=zdMhYYdMB08
http://forum.xda-developers.com/show....php?t=1447303
Samsung Vibrant

News
Original post by:
draikz
Link to original post:
http://forum.xda-developers.com/showthread.php?t=848737
** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly **
Fixing so-called "Bricks"/Odin Errors
This guide is open to contribution/editing/correcting
I DO REALIZE THAT MOST OF THESE LINKS ARE BROKEN, PLEASE SCAN THE THREAD TO FIND UPDATED LINK. I'M NOT VERY ACTIVE ANYMORE, SORRY!
-----------------------------------------------------------------------------------------------------
BOOT CYCLE
This is where you get the annoying Samsung Screen/Galaxy S screen.
DOWNLOAD REQUIRED (CREDITS TO JUSTANOTHERCROWD):
Quote:
Originally Posted by justanothercrowd
JFD ODIN Images from Samsung (PDA)
www.justanotherdev.slackdev.com/T959UVJFD.tar
MD5:632730f6b637f53e5b10e5cbc8b966a7
512 PIT File (PIT Extract first!)
www.justanotherdev.slackdev.com/s1_odin_20100512.rar
MD5:b5628c8e183fdd8f4c703321ca40e33a
ODIN
www.justanotherdev.slackdev.com/Odin3.rar
ALL 3 Files plues the root update.zip
http://tinyurl.com/2bc5b6r
thx to KopyKatKiller
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
-----------------------------------------------------------------------------------------------------
NO-BOOT PHONES
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, except for the downloading parts, obviously.
-Phone not responsive?
*Try "NO-BOOT PHONES"section of this guide
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
-Cannot get into download mode using the method I listed? Use the method(s) below:
Soldering Method
More methods coming soon
-----------------------------------------------------------------------------------------------------
I know how much of a pain posting in the Q/A section can be and the wait time is pretty bad, so if you need help regarding UNBRICKING and ONLY UNBRICKING feel free to post in here.
Hope you enjoy, this is my first guide, please don't flame. Any comments or suggestion is suggest, or if you have your own method I'll also post it
POST YOUR RESULTS!
-Steven
The only forums this guide should be posted on is XDA, DZ, and PHANDROID under the username DRAIKZ and EXPLOSIVE. If it helped you, feel free to donate a coke or two!

[HOW-TO] Convert to F2FS on Nexus 6 (Any Rom)

I didn't see anything about how to convert to f2fs for the nexus 6 so I thought i'd write something up as somebody requested me to do this.
What are the benefits of using f2fs over ext4?
I could list pros and cons, but I strongly encourage you to do your own research on the matter.
Should I do this
If you want to at your own risk
Pre-requisites
You need a recovery that supports f2fs in kernel and has the f2fs tools. Dhacker20 has provided one (TWRP 2.8.5.0) here: https://twitter.com/dhacker29/status/568070387306766336
You will need a kernel that supports f2fs for /cache and /data (Obviously I recommend Zen Kernel, but there are some others. Zen has the newest f2fs from upstream, while others may not)
ONLY YOU ARE RESPONSIBLE FOR YOUR DATA. IT IS YOUR RESPONSIBILITY TO UNDERSTAND THE RISKS AND YOUR RESPONSIBILITY TO BACKUP YOUR DATA
How-To
1.) Back up everything you care about to your PC (everything will be erased, including sdcard)
2.) Install a kernel that supports f2fs. Get the boot.img and do "fastboot flash boot boot.img" in bootloader (Like Zen)
3.) Install the recovery with f2fs support (fastboot flash recovery twrp-recvery-f2fs.img)
4.) In TWRP, go to Wipe
5.) Do a full wipe by swiping right
6.) Go to Wipe -> Advanced Wipe
7.) Choose /cache
8.) Choose "Change Filesystem"
9.) Pick f2fs, proceed
10.) Do the same thing for /data
11.) While still in recovery, plug phone into PC and do this:
Code:
# adb shell
# mount -o rw /system
# cp /sbin/fsck.f2fs /system/bin/
# cp /sbin/mkfs.f2fs /system/bin/
# chmod a+x /system/bin/*f2fs*
12.) Reboot and you are done.

Reserved

Is adb shell in terminal app

jiv101 said:
Is adb shell in terminal app
Click to expand...
Click to collapse
No adb is part of the android SDK platform-tools

I did this a while ago (except for step 12), and I remember something happening, which caused my data partition to become corrupted. I tried to format the partition again using ext3 or whatever the default is and that ended up giving me a soft brick. I had to restore the factory software. I have read things of where it does improve R/W speeds but I don't know if it's worth the hassle of possibly losing everything at the drop of a hat if you flash ROMs often.

RSVP..
Thanks for the information on F2FS well needed..!

brando56894 said:
I did this a while ago (except for step 12), and I remember something happening, which caused my data partition to become corrupted. I tried to format the partition again using ext3 or whatever the default is and that ended up giving me a soft brick. I had to restore the factory software. I have read things of where it does improve R/W speeds but I don't know if it's worth the hassle of possibly losing everything at the drop of a hat if you flash ROMs often.
Click to expand...
Click to collapse
The last step is a huge component of the whole process. If the rom doesn't have f2fs-tools in by default (most don't have fsck.f2fs/mkfs.f2fs) you will not have standard integrity checking every time you boot like you do on ext4. If you do the last step you will get integrity checking every time you bootup.
Also, since f2fs is a relatively young file system it can do harm to revert to older versions of the file system. For example, zen kernel has the newest f2fs which was updated last about 2 days ago. If you go on stock kernel you will find an f2fs that is 1+ year old. There may be a compatibility issue between these two where if you flash different roms (which almost always bundle a kernel)/kernels you will almost certainly have an issue.
But that's all part of the risk with using a relatively young file system. I do not understate the risks of data corruption in doing something like this - but anybody who is doing this and has significant worry should take precautions is backing up all their important files.

bbedward said:
The last step is a huge component of the whole process. If the rom doesn't have f2fs-tools in by default (most don't have fsck.f2fs/mkfs.f2fs) you will not have standard integrity checking every time you boot like you do on ext4. If you do the last step you will get integrity checking every time you bootup.
Also, since f2fs is a relatively young file system it can do harm to revert to older versions of the file system. For example, zen kernel has the newest f2fs which was updated last about 2 days ago. If you go on stock kernel you will find an f2fs that is 1+ year old. There may be a compatibility issue between these two where if you flash different roms (which almost always bundle a kernel)/kernels you will almost certainly have an issue.
But that's all part of the risk with using a relatively young file system. I do not understate the risks of data corruption in doing something like this - but anybody who is doing this and has significant worry should take precautions is backing up all their important files.
Click to expand...
Click to collapse
Is there any sort of confirmations when you are doing the last steps? I see this when I do them and I'm not sure if it has actually done the last steps.
C:\Development\platform-tools>adb shell
~ # ←[6nmount -o rw /system
mount -o rw /system
~ # ←[6ncp /sbin/fsck.f2fs /system/bin/
cp /sbin/fsck.f2fs /system/bin/
~ # ←[6ncp /sbin/mkfs.f2fs /system/bin/
cp /sbin/mkfs.f2fs /system/bin/
~ # ←[6nchmod a+x /system/bin/*f2fs*
chmod a+x /system/bin/*f2fs*
~ # ←[6n
C:\Development\platform-tools>

lobrau said:
Is there any sort of confirmations when you are doing the last steps? I see this when I do them and I'm not sure if it has actually done the last steps.
C:\Development\platform-tools>adb shell
~ # ←[6nmount -o rw /system
mount -o rw /system
~ # ←[6ncp /sbin/fsck.f2fs /system/bin/
cp /sbin/fsck.f2fs /system/bin/
~ # ←[6ncp /sbin/mkfs.f2fs /system/bin/
cp /sbin/mkfs.f2fs /system/bin/
~ # ←[6nchmod a+x /system/bin/*f2fs*
chmod a+x /system/bin/*f2fs*
~ # ←[6n
C:\Development\platform-tools>
Click to expand...
Click to collapse
That's about it, you can type exit to get out of adb shell or just close it.
On your device you can make sure f2fs took by simply typing "mount" in terminal emulator. You should see you data and cache reads f2fs now.

lobrau said:
Is there any sort of confirmations when you are doing the last steps? I see this when I do them and I'm not sure if it has actually done the last steps.
C:\Development\platform-tools>adb shell
~ # ←[6nmount -o rw /system
mount -o rw /system
~ # ←[6ncp /sbin/fsck.f2fs /system/bin/
cp /sbin/fsck.f2fs /system/bin/
~ # ←[6ncp /sbin/mkfs.f2fs /system/bin/
cp /sbin/mkfs.f2fs /system/bin/
~ # ←[6nchmod a+x /system/bin/*f2fs*
chmod a+x /system/bin/*f2fs*
~ # ←[6n
C:\Development\platform-tools>
Click to expand...
Click to collapse
Nope, it will only inform you if something went wrong (like file not found) of it all went through with no error it worked.
After you bootup you can verify it worked by typing "mount" in adb shell or terminal emulator. It should say f2fs on /data and /cache. Also in something like root Explorer if you navigate to /system/bin you should see the files you copied (fsck.f2fs and mkfs.f2fs)

bbedward said:
Nope, it will only inform you if something went wrong (like file not found) of it all went through with no error it worked.
After you bootup you can verify it worked by typing "mount" in adb shell or terminal emulator. It should say f2fs on /data and /cache. Also in something like root Explorer if you navigate to /system/bin you should see the files you copied (fsck.f2fs and mkfs.f2fs)
Click to expand...
Click to collapse
Perfect thanks for the quick response looked like it worked. Just out of curiosity is there any reason to format system to f2fs or does it end up causing issues, or just no changes in use?

lobrau said:
Perfect thanks for the quick response looked like it worked. Just out of curiosity is there any reason to format system to f2fs or does it end up causing issues, or just no changes in use?
Click to expand...
Click to collapse
I've tested it partly in testing the newest f2fs Zen merges as well as just general f2fs testing before.
It seems like writes are a bit faster, especially sql stuff. I've seen some grossly huge benchmark differences on other devices - on the n6 I've seen improvements but nothing astronomical like those benchmarks portrayed (I presume the 200% increase in write performance they showed is not accurate regardless) .

Recovery
So currently I'm on a 5.1 stock based rom (sinless) and TWRP 2.8.6
HAve Downloaded the latest Zen Kernel, and am downloading the latest 5.1 Benzo Rom.
Am I going to have issues rolling back to a 2.8.5 recovery - does 2.8.5 support 5.1 based roms?

shaitan667 said:
So currently I'm on a 5.1 stock based rom (sinless) and TWRP 2.8.6
HAve Downloaded the latest Zen Kernel, and am downloading the latest 5.1 Benzo Rom.
Am I going to have issues rolling back to a 2.8.5 recovery - does 2.8.5 support 5.1 based roms?
Click to expand...
Click to collapse
Yea it's compatible. There isn't a 2.8.6 with f2fs support yet that I know if and I haven't had the time to make one myself, but the 2.8.5 one works just fine.

@bbedward
I didn’t know any about the part 11 (I mean I convert mine to F2FS before I read this) so I’m wondering I’m gonna face any problem or not?
And also if have to do it, can I do it now or I have to wipe everything and then do it (cause changing partition to F2FS will clean everything)
Also I’m on your kernel.

dany20mh said:
@bbedward
I didn’t know any about the part 11 (I mean I convert mine to F2FS before I read this) so I’m wondering I’m gonna face any problem or not?
And also if have to do it, can I do it now or I have to wipe everything and then do it (cause changing partition to F2FS will clean everything)
Also I’m on your kernel.
Click to expand...
Click to collapse
Every time you boot your phone, it automatically runs fsck (for ext4 on stock). Essentially it's an automatic integrity check and repair.
So if it finds issues at boot up in the file system, it will tend to fix them automatically. If you look at boot up logs currently you will probably see something like "/system/bin/fsck.f2fs not found skipping integrity check"
You don't have to wipe everything though, you can just install the tools now.
I'm almost happy I posted this now hopefully it saves a few filesystems for folks who didn't do it completely.
---
When you see a kernel say f2fs compatible it means:
- f2fs is built into the kernel or a module is provided
- It's ramdisk's fstab allows for mounting of partitions as f2fs. On zen - it supports /data and /cache
When you see a rom say f2fs compatible it means:
- They have an f2fs-compatible kernel included
- They have the f2fs tools in the rom (As step 11 does)
This is why I say in the title this is "Any Rom" compatible as it will work on any rom, while on other devices you may see "Rom x, rom y, and rom z are the only known roms to be fully compatible." If you just do it this way it doesn't matter because it'll make any rom compatible with f2fs.

@bbedward this worked perfectly! But I just want to confirm that it switches back to ext4 after flashing a new ROM? After wiping and doing a clean flash it seems I'm not booting in f2fs anymore.
Am I doing something wrong or will I have to do this every time I clean flash?
Thanks again for the tutorial!

philsfan said:
@bbedward this worked perfectly! But I just want to confirm that it switches back to ext4 after flashing a new ROM? After wiping and doing a clean flash it seems I'm not booting in f2fs anymore.
Am I doing something wrong or will I have to do this every time I clean flash?
Thanks again for the tutorial!
Click to expand...
Click to collapse
I think most likely when you flashed a rom it overwrote your f2fs kernel, which caused it to reformat to ext4 when you booted it up.
Whenever you flash a rom you will need to flash f2fs-kernel right afterwards, and re-copy the tools (step 11) if the rom doesnt have them already in order to keep f2fs.

bbedward said:
I think most likely when you flashed a rom it overwrote your f2fs kernel, which caused it to reformat to ext4 when you booted it up.
Whenever you flash a rom you will need to flash f2fs-kernel right afterwards, and re-copy the tools (step 11) if the rom doesnt have them already in order to keep f2fs.
Click to expand...
Click to collapse
Thanks for responding so soon!
So I did flash zen9 (so good BTW) immediately after but I didn't repeat step 11 again. So that means Chroma doesn't have the necessary files for f2fs, good to know!
Edit: @bbedward does that mean I don't have to reformat again? Just do step 11?
Edit 2: entered step 11 in recovery and now i'm back to f2fs thanks again!

bbedward said:
The last step is a huge component of the whole process. If the rom doesn't have f2fs-tools in by default (most don't have fsck.f2fs/mkfs.f2fs) you will not have standard integrity checking every time you boot like you do on ext4. If you do the last step you will get integrity checking every time you bootup.
Also, since f2fs is a relatively young file system it can do harm to revert to older versions of the file system. For example, zen kernel has the newest f2fs which was updated last about 2 days ago. If you go on stock kernel you will find an f2fs that is 1+ year old. There may be a compatibility issue between these two where if you flash different roms (which almost always bundle a kernel)/kernels you will almost certainly have an issue.
But that's all part of the risk with using a relatively young file system. I do not understate the risks of data corruption in doing something like this - but anybody who is doing this and has significant worry should take precautions is backing up all their important files.
Click to expand...
Click to collapse
That was probably it! It was just a pain because this is the first phone that I've had in a while that doesn't have an SD card, I had a nandroid, but it doesn't do any good if you can't access your data partition Hahaha I have now taken to uploading my nandroids to Google Drive or putting them on my pc just in case that happens.

[Tutorial] LG Gpad v410 5.1 to 4.4 downgrade, root, & internal storage fix.

EDIT: If you are coming here for the first time, this guide should still work, but @PorygonZRocks has created a flashable zip that should deal with a lot of these issues automatically. You can check out his post here:
https://forum.xda-developers.com/showpost.php?p=75787067&postcount=699
This method will indirectly allow you to root the LG Gpad v410 after it has been upgraded to Lollipop 5.1.1. Yes. Rooting LG v410 Lollipop. It's through a downgrade, but it works.
It took a while to get working, but here's how I did it. The process is straightforward, but the details matter greatly. You will brick your device if you mess up. Please read everything *first* before you do anything. Be sure you understand the process. I'll try to explain what's going on along the way.
An external SD card is extremely helpful for this process. You *could* adb push everything, but that will tedious.
First, you need some files.
The 4.4.2 KDZ which is a TEST OS, but it can be rooted and it downgrades to a Bump'able bootlaoder:
http://forum.xda-developers.com/g-pad-10/general/kdz-lg-g-pad-7-0-v410-t3224867
The LG 2014 Flash Tool:
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
Android LG Drivers:
https://www.androidfilehost.com/?fid=24052804347802528
Parted for Android. You can probably find it other places, but I found this file:https://dl.dropboxusercontent.com/u/84115590/LG%20G2%2016GB%20Solution/sdparted-recovery-all-files.zip
EDIT: There seems to be a lot of confusion here. My bad. All you need is the file named "parted" from this zip file - nothing else. Just put that one file in the root of your external SD card.
https://dl.dropboxusercontent.com/u/84115590/LG G2 16GB Solution/sdparted-recovery-all-files.zip linked from here: http://www.**********.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/
EDIT2: The dropbox link is down. I've attached the file directly.
The Candy5 ROM (This will potentially save you some manual steps. Somewhat optional, but highly recommended):
http://forum.xda-developers.com/g-pad-10/development/rom-candy5-g-pad-v410-lollipop-5-1-1-v2-t3111987
Flashify APK:
http://www.apkmirror.com/apk/christian-gollner/flashify/flashify-1-9-1-android-apk-download/
TWRP for the v410:
http://forum.xda-developers.com/g-pad-10/development/recovery-twrp2-8-5-0lgv400-410-t3049568
LG One Click Root:
http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
(You may use Purple Drake or whatever else you want. They all use the same root script as this does and the GUI is helpful for novices.)
Android SDK (specifically adb.exe. After installing go to SDK Manager and ensure that Android SDK Platform Tools is checked):
http://developer.android.com/sdk/index.html
For clarification below, when I have commands in "quotes" they are Windows commands. When they are in `backticks` they are commands that you run inside of ADB which actually run on your device....as root. Root can screw things up. Please be extra cautious. If you blame me for messing up your device I will laugh at you. But that's not gonna happen, right? Good. Let's go.
Now that you have everything, put it all into a folder where you can access it easily.
Install the LG Drivers.
Install Android SDK (or otherwise get adb.exe).
Extract all of the archives.
Move the KDZ to the LG Flash Tool 2014 folder.
Put the tablet into Download Mode by powering it off, holding VolUp, and plugging in the USB cable. Press VolUP when instructed. You must be in Download mode before continuing.
Run LGFlashTool2014.exe. Select the KDZ file. Click "CSE Flash". Click "Start". Select "English" and click OK. Do not change anything else.
WAIT for the flash to continue. If you really want to brick your device, here's a good opportunity.
The device will reboot into Android 4.4.2. You will only have 4GB of internal storage at this point. DON'T PANIC! We are fixing it.
Enable USB debugging.
Connect the device.
Install and run LG One Click Root. Wait for the device to be rooted before proceeding.
Copy the Flashify apk, TWRP image, and Candy5 ROM to your external SD card.
Install Flashify and flash TWRP to the recovery partition.
Use the Flashify menu to reboot in to recovery.
DON'T PANIC! You will get white vertical lines on the boot screen from now on. They only show up during boot animations. A small price to pay. This may be fixed at a later date. for the time being! Thanks to marcsoup's first post ever, we have a fix! Details below. PLEASE click this link and thank him!
Things get tricky here. Copy parted to your external SD card and then run "adb shell" from Windows to get a shell in TWRP.
In TWRP, unmount /data by tapping Mount > uncheck Data.
`cp /sdcard/parted /sbin/` This copies the parted binary to /sbin so it can be executed in the path. I had trouble running `/sdcard/parted`, but YMMV.
`chmod +x /sbin/parted` Make it executable.
`parted /dev/block/mmcblk0` Run parted against the internal mmc
`p` Prints the partition table.
`rm 34` Deletes partition 34 labeled "grow". This is the root of our problem. The KDZ apparently only creates a 4GB partition, I assume so the test build has maximum compatibility with all sized devices.
`rm 33` Deletes partition 33 "userdata"
`p` Print to verify
`mkpartfs` Create a partition and put a filesystem on it. If we only expand the partition it won't help us because the filesystem is still only 4 GB.
a) name: userdata
b) type: ext2 (the tool only supports ext2. This is ok for now.)
c) start: 3439MB (the end of part 32. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the MB part otherwise the offset will overwrite another critical partition.
d) end: 15.8GB (where "grow" ended above. IT MAY BE DIFFERENT FOR YOU!) Be sure you do not omit the GB part otherwise the offset will overwrite another critical partition.
`p` Verify. For me it did not name the partition properly. Gotta fix that.
(if necessary) `name 33 userdata` This is critical for mount to find it in /dev/block/platform/msm.sdcc.1/by-name/ on some/all ROMS.
`p`. Verify one last time. Compare it to my partition table in the attachments. If you want to brick, delete some random partitions here.
Flash Candy5 with TWRP. It's only 239 MB, so it will flash quickly. I do this because Candy5 will reformat mmcblk0p33 from ext2 to ext4 for you. It does this as part of it's system boot, apparently. If you install a different ROM that does not do this, you can reformat it by running `make_ext4fs /dev/block/mmcblk0p33`. If your ROM does not have make_ext4, it likely has some differnt method to make an EXT4 filesystem. `/system/bin/mke2fs -t ext4 /dev/block/mmcblk0p33` may work better. Just flash Candy5 and be done with it.
Tap Wipe > Swipe to Factory Reset.
Tap Reboot > System.
WAIT!!! It will take a minute for the ROM to start the first time. You will have white lines and and possibly a white screen. WAIT. It's moving the DEX files to cache, formatting a partition, creating default folders on the internal storage, and several other things. WAIT! When the screen goes dim or turns off then it's ready.
Cycle the display or turn it on. You should be at the Candy5 lock screen.
USB debugging is on by default. Run "adb shell".
`mount | grep userdata` Make sure mmcblk0p33 is mounted.
`df` Make sure /data is 11.3 GB (or whatever size it is on non-16GB devices).
HELL YEAH, you downgraded, rooted, and fixed the partition problem. Enjoy your tablet!
Thanks to dopekid313 for finding the KDZ.
Thanks to timmytim for Candy5.
Thanks to the creators of the root script, flashify, TWRP, and XDA for being so awesome.
Thanks to marcsoup for fixing a fix to the white lines.
Thanks to navin56 for the partition dumps. PLEASE thank his post!
White lines fix.
What we are going to do is flash the aboot partition with the stock image provided by navin56. I've removed the extra files from the dump, so simply download aboot.img.7z below. Unzip it using 7zip.
These commands are to be run in TWRP. Reboot to TWRP recovery and connect with "adb shell". All of the following commands will be run in ADB under TWRP. If you cannot figure out how to get here, please post in the thread and someone will help you. Onward:
If you do everything correctly then you don't have to reflash your ROM and you won't lose data. This process can be done any time after flashing the KDZ, even before you follow the steps above to resize the userdata partition. It's a completely separate process.
Unzip aboot.img.7z so you have the file named aboot.img. You should also make sure that aboot.img's MD5 sum is e97431a14d1cee3e9edba513be8e2b52. Do not flash the 7z file. Please.
Copy aboot.img to your external SD card. It should live at /sdcard/aboot.img
Boot to TWRP and run "adb shell"
`ls -al /dev/block/platform/msm_sdcc.1/by-name/` Let's make sure we are flashing the right partition. On my device "aboot" is /dev/block/mmcblk0p6. You should verify this on your device or you WILL brick your tablet.
`dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot-fukt.img` Let's back up our current aboot partition before we go flashing things just in case there are unintended consequences later. Be sure you have the same partition that "aboot" referred to in the 4th step or you have just backed up the wrong partition.
`dd if=/sdcard/aboot.img of=/dev/block/mmcblk0p6` Be sure the file exists, is the correct aboot.img, and you are flashing the right partition. You have been warned!!
Reboot TWRP and enjoy your boot animations again.
If I missed anything, please let me know. As far as I know this is the very first tutorial that details what is necessary to accomplish this. Please hit the Thanks button on every thread that you visit to download files!
FAQ:
Q: Why do I only have 11.3 GB of space when my device is 16GB?
A: The entire internal SD card (eMMC) is 16 GB. Gotta have someplace to install the bootloader, recovery, android, the modem OS, the secondary bootloader, the cache, the resource and power manager, and all of the other partitions necessary for the table to operate. Please look at the second screenshot in the OP. All of those 33 partitions take up room on the internal card. Fortunately ALL of those partitions ONLY take up about 4.4 GB. Hence the 'userdata' partition is ~11.3 GB.

If anyone wants to use my work to create a flashable zip to make it easier for novices, please do so. My problem is solved and I don't have the time to create the zip. Please post any questions and I'll gladly answer them! I'm so stoked that we have a usable downgrade method now!

Thank You, Worked Great

Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you

grandamle91 said:
Thank You, Worked Great
Click to expand...
Click to collapse
Glad to be of help!
dopekid313 said:
Thanks for making this I was gonna do it but was to lazy lol and thanks for linking my thread and giving cred instead of just linking straight to the kdz thank you
Click to expand...
Click to collapse
Of course! If you hadn't obtained the firmware then we'd all still be looking for a solution. It pisses me off to no end when people try to take credit for other people's work. We all just need to realize and acknowledge that we are simply standing on the shoulders of those who did the work necessary for each of us to do our work.

I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted

grandamle91 said:
I just noticed since we formatted the userdata it screws up TWRP. It won't mount Data and it says the settings are corrupted
Click to expand...
Click to collapse
Is this after you've rebooted into Candy5 and the partition is reformatted as ext4 (or you've done so manually)? TWRP may not be able to mount an ext2 partition.
EDIT: I just tested this. Following my instructions and flashing to Candy5, TWRP sees mmcblk0p33 (userdata) as the full size and mounts it at /emmc.
For clarification, after you run the parted commands, it will mess with the partition table and TWRP will most likely not be able to see it to remount it - at least not until after a reboot. This is why you need an external SD card from which to install ROMs.

/data not mounted
Edit: nevermind. The partition 33 was still ext2. I had to run make_ext4fs /dev/block/mmcblk0p33 and now I am able to mount /data. Thanks.
Thanks for taking the time to help us.
I followed the steps and till 33 I am good. But once I am in Candy5, I am not able to adb shell (adb not recognizing device eventhough usb debugging is on). I rebooted to recovery and adb works there. But my /data partition is not enabled in TWRP. I am not able to check it either under Mount in TWRP.
Code:
mount | grep userdata
is empty
Code:
df
does not show data

I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.

gridironbear said:
I tried this and my tablet bootlooped. I was able to get into fastboot and restore. I would GREATLY appreciate it if someone who has the time, would kindly donate their valuable time to into making an exe zip or something.
Click to expand...
Click to collapse
At what point did it bootloop? What was the last step that you took before rebooting?

Zip
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.

drumm3rb0y said:
I would really appreciate a zip file as I have never been savvy with adb and for whatever reason it doesn't want to work on Windows 10.
Click to expand...
Click to collapse
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.

fatbas202 said:
A zip file for what part? The only part that requires ADB directly is to fix the internal storage. You absolutely have to flash the KDZ and then root before you can do anything. If you are on 5.x then you have no possible way to root, much less flash a zip file.
If you tell me what exactly you are having issues with I will try to help.
Click to expand...
Click to collapse
The adb part is the part im having issue with. Everything else is flashed already. I was wondering if you could make a zip for the adb part so I can just flash it through twrp.

thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards

shahidmianoor said:
thanks for the great help. it did work perfectly to regain the lost space.
what about white lines ? is there any solution for that problem ?
I have tried flashing back stock recovery extracted from kdz, dd' but didn't help.
Now i am thinking of flashing back the aboot.bin extracted from original kdz or i can dump ".img" from another working device. (i have 4 similar devices)
what is your opinion i m not a developer and i need your advise. should i go ahead and which partition should i dd ? aboot or abootb or boot ?
regards
Click to expand...
Click to collapse
I have no solid evidence of this, but I suspect that the white lines are caused by a display driver issue where when the bootloader hands over control of the display to the kernel it doesn't get reinitialized properly. I have no ideas as to how to get rid of that at the moment but if I stumble across something I'll be sure to post here.
While I'm not an Android developer, I've been a Linux admin for 10+ years and have a lot of experience with Android devices. I'd be really hesitant to go flashing things ad hoc. While Download Mode may save you if you flash the wrong thing, I'm not entirely sure what the limitations that you may run in to with a locked bootloader are.
After having this device for months on 5.x and FINALLY being able to downgrade and run custom ROMs with root, not seeing a boot animation is a pittance to pay. But I'll keep looking.

i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10

Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?

Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.

I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?

iphone5sf said:
Do I need to Re-mount Data ? I press format data button at TWRP and mount data. It looks work great.
After all process, it shows 16Gb total at storage, 11.04GB available. it works perfectly.
I need the stock V41010d, so I reflash the stock rom rooted at [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2 | Rooted + Busybox
Now, my Gpad is at stock V41010d, but I have a question about the boot screen, is it still with white lines and white screen? Any method to fix it?
Click to expand...
Click to collapse
You shouldn't need to remount or format data. The parted command nukes the filesystem and creates a new one formatted as ext2. At this point the running kernel has the old partition table loaded and won't know that the partition has been extended. Simply flash Candy5 and reboot at this point and it will reformat the userdata partition.
See above for the white lines during the boot animation. Known issue, no fix in sight, doesn't really matter.
nmnm4alll said:
Hello,
Thanks for the great work. unfortunately I am facing some difficulty, starting from step# 16 "Things get tricky here", how to run"adb shell in TWRP?
also can I use minimal_adb_fastboot_v1.1.3_setup.exe as mentioned in the link in the OP http://www.droidviews.com/your-32gb-lg-g2-shows-only-16gb-storage-space-heres-the-fix/ ?
also I noticed the path have been used includes 'parted' folder, but the folder I have after unzipping the parted zip called 'sdparted-recovery-all-files', do I rename the folder to 'parted' instead?
please help and excuse my broken English.
Click to expand...
Click to collapse
You only need the sdparted-recover-all-files.zip from that site. "parted" is not a folder, but the binary (without a file extension) inside of that zip file. Copy that file to /sbin and you are in business.
zmali1 said:
i have same problem entered in TWRP but when ADB sheel thorough DP tools it didn't connect to my device. i m also using windows 10
Click to expand...
Click to collapse
summonholmes said:
I'm also having trouble with the adb shell step. When my device is powered on normally, adb commands work. However, in TWRP mode my computer can't recognize the tablet, mount properly, and copy over parted. All the steps have been identical to this point. Any ideas?
Click to expand...
Click to collapse
I'd recommend installing the SDK and pulling the drivers from that. Alternatively, you can try the drivers here: https://github.com/koush/UniversalAdbDriver.
Technically, when I ran the "parted" commands I was actually booted in to rooted 4.4.2 from the KDZ; I wasn't actually in TWRP. It's just not a very recommended way of going about it. I explained how to run all of this from TWRP, but there's no technical reason that you *can't* run this from Android. You just *shouldn't* because you can't cleanly unmount the filesystem and it theoretically could cause filesystem corruption. I just figured that I don't care about that partition getting corrupted since it's getting wiped out.

[Flashable][GT-I9070] EMMC repartition

Hello, am new here so if I did something wrong please correct me OK
-presentation:
we all love running latest android versions and install big a** games like asphalt 8 and have all the Google apps that we love
But in Janice it's some kind of impossible to do all of that ( come on its only 4 years old!!)
As they say no impossible under the sun now you can easily increase system or data or what ever partition your want just by flashing a Lil file and without losing a single file
-Warning:
Me and XDA are not responsible for any soft hard leaks or what ever you are doing this by your self!!!
Make a full backup(system data boot) before starting..
DO NOT USE THIS FILE WITH ROMS THAT USE CACHE (CM10.2)
-Requirements:
1. Janice or Janice-p(not tested)
2. TWRP Recovery (Any Version)
3. The attached file
Instruction:
1. Download the repartition file
-rename the file with your favorite partition sizes like "lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice.zip" which means 1gb system 2gb sdcard and the rest will go to data partition so you will be able to install more apps
2. Boot into TWRP and make a backup
3. Flash the repartition file of your desire
4. Take a nap or watch big bang theory just waste some time
5. When the script finish restore your backup and reboot
6. Enjoy your games or what ever
-Credit:
1. @Lanchon
2. @madkita
If you want a file with your own sizes just write or in comments and i'll do my best to offer it to you

hi,
thanks for the guide! a couple of comments:
1) i suggest people get REPIT from its main site:
https://github.com/Lanchon/REPIT
the files posted here are already very old, i've updated REPIT several times.
also, i only provide support for the latest version. older versions are unsupported.
2) if you download the files from here, they will not work.
(XDA messes with the filenames changing = for -)
3) you don't need to backup anything unless you want to revert the flashing of the kernel.
4) you don't need to flash any particular kernel to run REPIT, you just need a recent TWRP build.
5) TWRP with gparted is not needed anymore: REPIT now bundles gparted and other tools.
6) the configurations proposed here are incorrect. you should use:
a) if you want 3GB data and rest as internal sdcard:
-system=1.0-data=3.0-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max.zip
b) if you have an external sdcard, and want 6GB data and a very small internal sdcard:
-system=1.0-data=max-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=0.0625+wipe.zip
then your internal sdcard will be useless. so you need to swap internal and external sdcards as detailed here:
http://forum.xda-developers.com/gal...ment/mod-internal-memory-repartition-t2863629
these configurations will keep contents of system and data. if you don't care about their contents, configure wiping (add '+wipe') for those partitions and REPIT will repartition much faster then.
7) read REPIT manual before using!
https://github.com/Lanchon/REPIT

Lanchon said:
hi,
thanks for the guide! a couple of comments:
1) i suggest people get REPIT from its main site:
https://github.com/Lanchon/REPIT
the files posted here are already very old, i've updated REPIT several times.
also, i only provide support for the latest version. older versions are unsupported.
2) if you download the files from here, they will not work.
(XDA messes with the filenames changing = for -)
3) you don't need to backup anything unless you want to revert the flashing of the kernel.
4) you don't need to flash any particular kernel to run REPIT, you just need a recent TWRP build.
5) TWRP with gparted is not needed anymore: REPIT now bundles gparted and other tools.
6) the configurations proposed here are incorrect. you should use:
a) if you want 3GB data and rest as internal sdcard:
-system=1.0-data=3.0-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=max.zip
b) if you have an external sdcard, and want 6GB data and a very small internal sdcard:
-system=1.0-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=0.0625 wipe.zip
then your internal sdcard will be useless. so you need to swap internal and external sdcards as detailed here:
http://forum.xda-developers.com/gal...ment/mod-internal-memory-repartition-t2863629
these configurations will keep contents of system and data. if you don't care about their contents, configure wiping (add ' wipe') for those partitions and REPIT will repartition much faster then.
7) read REPIT manual before using!
https://github.com/Lanchon/REPIT
Click to expand...
Click to collapse
Thus settings are right this is the same file I used and it worked perfectly and I told you I created this threat for noobs who can't understand github and there download section is not working for me it says "try again in 30 minutes" that's why I use old files

madkita said:
Thus settings are right this is the same file I used and it worked perfectly and I told you I created this threat for noobs who can't understand github and there download section is not working for me it says "try again in 30 minutes" that's why I use old files
Click to expand...
Click to collapse
lol no, without the '-sdcard=...' specifier those files won't work, trust me.

Lanchon said:
lol no, without the '-sdcard=...' specifier those files won't work, trust me.
Click to expand...
Click to collapse
Yeah thank you updated OP

first of all thank you both
just to be sure, i have a couple of questions:
- how much space does a full backup take?
- what is the limit to the repartition? right now i'd like to add one gigabyte to system for apps, which numbers do i need to write in the zip name?
- what does the "wipe preload" and "wipe fota" strings do?

TheSteve87 said:
first of all thank you both
just to be sure, i have a couple of questions:
- how much space does a full backup take?
- what is the limit to the repartition? right now i'd like to add one gigabyte to system for apps, which numbers do i need to write in the zip name?
- what does the "wipe preload" and "wipe fota" strings do?
Click to expand...
Click to collapse
In TWRP it will be around 500-600mb with compression
lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice.zip
Just rename the file to this and your will have 1gb system 2gb SD card and the rest well go to data if you want to edit a partition size for example the number 1 after system means the system will be 1gb and the number 2 in front of SD card means the SD card will be 2gb and max in front of data means the rest well go to data partition
Preload and fota are partition used in only stock ROMs and stock based ROMs so if you are running a custom ROM this will give you more space in the partition your set to max

thanks to both devs, i have one question is it compatible with cm13 ?
will i be able to re-size F2fs or i need a EXT4 to use this tool .

i just did everything but i'm not sure it worked
i used this name for the flashable zip
lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice
but in system info it still says that data is 3.91GB, and i have 1.84GB for SDcard
maybe i should have gone further and give 3GB to SDcard?

TheSteve87 said:
i just did everything but i'm not sure it worked
i used this name for the flashable zip
lanchon-repit-20160317-system=1-data=max-cache=0.03125 wipe-preload=min wipe-fota=min wipe ext4-sdcard=2-janice
but in system info it still says that data is 3.91GB, and i have 1.84GB for SDcard
maybe i should have gone further and give 3GB to SDcard?
Click to expand...
Click to collapse
Yup it works if your wanna check system download a small app called disk info
If you want 3gb on sdcard change the 2 number in front of it this will give you 2gb on data

DaksAnkit said:
thanks to both devs, i have one question is it compatible with cm13 ?
will i be able to re-size F2fs or i need a EXT4 to use this tool .
Click to expand...
Click to collapse
Yup 100%
Make a backup first and when resizing all partitions will be formated to ext4 then restore your backup it will automatically format them to f2fs

ayt man thanks , trying it right away !!
edit : getting error 1 in twrp 3.0.0 on cm13 rom I THOUGHT IT WAS compatible with repit , as said on the GITHUB
also i tried flashing zip from github page of lanchon , that zip also did not worked it said something like couldn`t find meta-inf lanchon REPIT.
??? where did i went wrong i just flashed the zip from twrp it did nt worked i moved the file to /tmp then tried there also same error .

DaksAnkit said:
ayt man thanks , trying it right away !!
edit : getting error 1 in twrp 3.0.0 on cm13 rom I THOUGHT IT WAS compatible with repit , as said on the GITHUB
also i tried flashing zip from github page of lanchon , that zip also did not worked it said something like couldn`t find meta-inf lanchon REPIT.
??? where did i went wrong i just flashed the zip from twrp it did nt worked i moved the file to /tmp then tried there also same error .
Click to expand...
Click to collapse
Cm13 recovery doesn't have parted script you have to use the recovery I provided in first post just follow it

madkita said:
Cm13 recovery doesn't have parted script you have to use the recovery I provided in first post just follow it
Click to expand...
Click to collapse
nope , it says error 1
invalid partition configuration ,.. sdcard : sdcard=max.zip
i flashed the kernel then renamed the file attached to ..
-system=1.0-data=3.0-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max.zip
something is not right can you please help , i would like to have 1 gb system n 2 or 3gb in data partitions correct me if i am wrong if the size configuration is wrong ?? what should i do.
also so i have to now restore my backup to get back to cm13 coz i am stuck at recovery ? any shortcut,like(flashing cm13 kernel) to go back to system as it was before or i have to restore the backup ?

DaksAnkit said:
nope , it says error 1
invalid partition configuration ,.. sdcard : sdcard=max.zip
i flashed the kernel then renamed the file attached to ..
-system=1.0-data=3.0-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max.zip
something is not right can you please help , i would like to have 1 gb system n 2 or 3gb in data partitions correct me if i am wrong if the size configuration is wrong ?? what should i do.
Click to expand...
Click to collapse
Use this and don't miss with it
lanchon-repit-20160317-system=1-data=2-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max-janice.zip

madkita said:
Use this and don't miss with it
lanchon-repit-20160317-system=1-data=2-cache=0.03125+wipe-preload=min+wipe-fota=min+wipe+ext4-sdcard=max-janice.zip
Click to expand...
Click to collapse
Thanks man , i sorted it out the problem was silly , i had checked option in windows to
HIDE EXTENSION NAMES OF KNOWN FILE TYPES , so i was just copying and the .zip kepton adding twice
.zip.zip and that is what was happening anyhow the device has started reparting , so one last question after when this process is over , i just install my backup and that is it ? right !!

DaksAnkit said:
Thanks man , i sorted it out the problem was silly , i had checked option in windows to
HIDE EXTENSION NAMES OF KNOWN FILE TYPES , so i was just copying and the .zip kepton adding twice
.zip.zip and that is what was happening anyhow the device has started reparting , so one last question after when this process is over , i ust install my backup and that is it ? right !!
Click to expand...
Click to collapse
Yup just restore your backup and you're done ?

madkita said:
yup just restore your backup and you're done
Click to expand...
Click to collapse
alrighty then !!
:good:
I`ll post how did it go later in the thread .
you have a good day bro enjoy sunday .. cheers

Can someone here confirm that the kernel cm12.1 (OP) can be installed in the latest CM11 ROM by epirex? And if repit could work after 12.1 Kernel installed in CM11 ROM? Thanks in advance.

TPD-21 said:
Can someone here confirm that the kernel cm12.1 (OP) can be installed in the latest CM11 ROM by epirex? And if repit could work after 12.1 Kernel installed in CM11 ROM? Thanks in advance.
Click to expand...
Click to collapse
First make a backup with your cm11's kernel then flash cm12.1 kernel then flash the script and the kernel doesn't t care about your current rom so it should work every where

[TOOL][UNOFFICIAL][PORT] REPIT: for Nexus 7 (2013) [deb][flo]

This is a port of Lanchon REPIT.
- Nexus 7 (2013) Deb (LTE) and Flo (WiFi) -​
Disclaimer:
I am not responsible for your actions or consequences, directly or indirectly, related to the files and/or advice offered.
It is your choice to proceed.
What is REPIT?
REPIT is a simple, safe, device-only, data-sparing, and easily portable repartitioning tool for Android devices.
See the GitHub README for more on What REPIT is. GitHub - Link
Limitations:
Requires TWRP (or TWRP based) recovery.
Does not support encrypted devices.
Will cause data loss if the repartitioning process is externally interrupted.
See the GitHub README for more on Limitations. GitHub - Link
---
Notes:
A few years ago (September 2018), I made a port of REPIT for deb,flo and manta that was spread out between multiple threads.
Some comments and instructions were lost in thread chatter or just in a different thread altogether.
The file name actually configures the repit script.
Noted that you may have to toggle MTP Disable, Enable, Disable.
Noted that you may have to reboot into TWRP after disabling MTP.
Remember /tmp is wiped after a reboot. Copy repit to /sdcard and after rebooting back into TWRP, copy it from /sdcard to /tmp using TWRP File manager.
Noted that you may have to unmount cache and data.
Do NOT flash repit from USB/OTG.
This is designed for a stock partition layout. If your device has been modified and a vendor partition was created, REPIT will not work.
Side note:
Lanchon added Nexus 7 (2013) to the official list. (November 2019)
Lanchon REPIT GitHub - Port Request - Commit
---
Be Careful.
There are always risks involved when you start messing around with a device.
If something goes wrong, you may end up with a non-working "bricked" device.
This is especially true when you start modifying partitions.
Backup what you want to save and store it off device.
Copy it to your computer, cloud storage, USB, ...
Instructions:
This operation might take a long time and must not be interrupted.
- Depending on the device and REPIT configuration, this might take a few hours.
Make sure your battery is fully charged or mostly charged.
- You can connect to a charger while the REPIT script is running. May or may not charge depending on the recovery.
How To:
If you already have a ROM installed, repit will backup, change the partition, restore and resize.
- You can just reboot once the script finishes.
Boot into TWRP
Swipe to Allow Modifications
Copy the repit zip to /tmp
Disconnect from computer
Disable MTP
Disable MTP TWRP -> Mount
Install repit
TWRP -> Install -> navigate to /tmp and flash the repit zip
Reboot to system
If you are doing a clean install, add the +wipe option to system in the zip file name. This will speed up the partitioning since system will not be backed up and restored.
lanchon-repit-20210220-system=max+wipe-cache=16M+wipe-flo.zip
- Reboot back into TWRP after the script finishes.
- Then follow the instructions from the rom thread to install the rom you are going to use.
Boot into TWRP
Swipe to Allow Modifications
Copy the repit zip to /tmp
Disconnect from computer
Disable MTP
Disable MTP TWRP -> Mount
Install repit
TWRP -> Install -> navigate to /tmp and flash the repit zip
Reboot to recovery
Follow the instructions from the rom thread to install the rom you are going to use.
---
Changes:
Nexus 7 (2013) [Deb][Flo]
Pushed a bit pass the safe zone and claimed a bit more unallocated space.
Updated to the current REPIT scripts.
Separate zip files for deb and flo.
Nexus 7 (2013) GitHub - Commit
Download Links:
MediaFire - Link
SourceForge - Link
GoogleDrive - Link
Direct Download from MediaFire:
lanchon-repit-20210221-system=max-cache=16M+wipe-deb.zip MediaFire - Download
lanchon-repit-20210221-system=max-cache=16M+wipe-flo.zip MediaFire - Download
REPIT Links:
Lanchon REPIT GitHub - Link
- My fork GitHub - Link
Credits:
Lanchon for his excellent REPIT project.
The Android Community and everyone who has helped me learn through the years.
Cheers all.

Note about configuration.
The user configuration is done by renaming the zip file before flashing it.
Not much room to change on deb/flo.
The modifiable partitions are only system and cache (22 and 23).
The actual partitioning is done by a sector range. This is declared inside the script along with a default configuration.
Code:
# the set of partitions that can be modified by REPIT:
# <gpt-number> <gpt-name> <friendly-name> <conf-defaults> <crypto-footer>
initPartition 22 system system "same keep ext4" 0
initPartition 23 cache cache "same keep ext4" 0
initPartition 24 misc misc "same keep raw" 0
# the set of modifiable partitions that can be configured by the user (overriding <conf-defaults>):
configurablePartitions="$(seq 22 23)"
...
# the set of contiguous partitions that form this heap, in order of ascending partition start address:
heapPartitions="$(seq 22 24)"
# the disk area (as a sector range) to use for the heap partitions:
heapStart=$(parOldEnd 21) # one sector past the end of tzb.
heapEnd=$(parOldStart 25) # the start of recovery.
By default, REPIT will back up, restore, compress and/or expand a partition.
The +wipe option will wipe the partition.
The max option is an easy way to allocate the remaining space for a partition.
The misc partition is not part of the user-config but, it is in the sector range.
It will be moved to the the end of the sector range without alteration.
The default zip name lanchon-repit-20210221-system=max-cache=16M+wipe-flo.zip
Creates a 16M clean cache partition. (Wiped)
Uses the rest of the unallocated space in the range for system.
System is backed up and restored since the +wipe option was NOT added to system.
Since only system and cache can be configured, this only allows a few options for deb and flo.
Default zip name. -system=max-cache=16M+wipe-
Include wipe system. -system=max+wipe-cache=16M+wipe-
See the GitHub README for more on how to configure. GitHub - Link
Cheers all.

<RESERVE>

<RESERVE>

I think this deserves a bump, because, this is some great work right here for those wanting to stick with a stock-like partition layout!

Hi, I want to go back stock partition size. So i have to rename the zip.
What zip name?

ipdev said:
This is a port of Lanchon REPIT.
- Nexus 7 (2013) Deb (LTE) and Flo (WiFi) -​
Disclaimer:
I am not responsible for your actions or consequences, directly or indirectly, related to the files and/or advice offered.
It is your choice to proceed.
What is REPIT?
REPIT is a simple, safe, device-only, data-sparing, and easily portable repartitioning tool for Android devices.
See the GitHub README for more on What REPIT is. GitHub - Link
Limitations:
Requires TWRP (or TWRP based) recovery.
Does not support encrypted devices.
Will cause data loss if the repartitioning process is externally interrupted.
See the GitHub README for more on Limitations. GitHub - Link
---
Notes:
A few years ago (September 2018), I made a port of REPIT for deb,flo and manta that was spread out between multiple threads.
Some comments and instructions were lost in thread chatter or just in a different thread altogether.
The file name actually configures the repit script.
Noted that you may have to toggle MTP Disable, Enable, Disable.
Noted that you may have to reboot into TWRP after disabling MTP.
Remember /tmp is wiped after a reboot. Copy repit to /sdcard and after rebooting back into TWRP, copy it from /sdcard to /tmp using TWRP File manager.
Noted that you may have to unmount cache and data.
Do NOT flash repit from USB/OTG.
This is designed for a stock partition layout. If your device has been modified and a vendor partition was created, REPIT will not work.
Side note:
Lanchon added Nexus 7 (2013) to the official list. (November 2019)
Lanchon REPIT GitHub - Port Request - Commit
---
Be Careful.
There are always risks involved when you start messing around with a device.
If something goes wrong, you may end up with a non-working "bricked" device.
This is especially true when you start modifying partitions.
Backup what you want to save and store it off device.
Copy it to your computer, cloud storage, USB, ...
Instructions:
This operation might take a long time and must not be interrupted.
- Depending on the device and REPIT configuration, this might take a few hours.
Make sure your battery is fully charged or mostly charged.
- You can connect to a charger while the REPIT script is running. May or may not charge depending on the recovery.
How To:
If you already have a ROM installed, repit will backup, change the partition, restore and resize.
- You can just reboot once the script finishes.
Boot into TWRP
Swipe to Allow Modifications
Copy the repit zip to /tmp
Disconnect from computer
Disable MTP
Disable MTP TWRP -> Mount
Install repit
TWRP -> Install -> navigate to /tmp and flash the repit zip
Reboot to system
If you are doing a clean install, add the +wipe option to system in the zip file name. This will speed up the partitioning since system will not be backed up and restored.
lanchon-repit-20210220-system=max+wipe-cache=16M+wipe-flo.zip
- Reboot back into TWRP after the script finishes.
- Then follow the instructions from the rom thread to install the rom you are going to use.
Boot into TWRP
Swipe to Allow Modifications
Copy the repit zip to /tmp
Disconnect from computer
Disable MTP
Disable MTP TWRP -> Mount
Install repit
TWRP -> Install -> navigate to /tmp and flash the repit zip
Reboot to recovery
Follow the instructions from the rom thread to install the rom you are going to use.
---
Changes:
Nexus 7 (2013) [Deb][Flo]
Pushed a bit pass the safe zone and claimed a bit more unallocated space.
Updated to the current REPIT scripts.
Separate zip files for deb and flo.
Nexus 7 (2013) GitHub - Commit
Download Links:
MediaFire - Link
SourceForge - Link
GoogleDrive - Link
Direct Download from MediaFire:
lanchon-repit-20210221-system=max-cache=16M+wipe-deb.zip MediaFire - Download
lanchon-repit-20210221-system=max-cache=16M+wipe-flo.zip MediaFire - Download
REPIT Links:
Lanchon REPIT GitHub - Link
- My fork GitHub - Link
Credits:
Lanchon for his excellent REPIT project.
The Android Community and everyone who has helped me learn through the years.
Cheers all.
Click to expand...
Click to collapse
I have been trying to repartition Nexus flo 2013 following the steps outlined above with lanchon-repit-20210221-system=max+wipe-cache=16M+wipe-deb.zip for 19.1 version but keep getting Error 1, see photo. Any help will be much appreciated. Thank you

greenleaves said:
I have been trying to repartition Nexus flo 2013 following the steps outlined above with lanchon-repit-20210221-system=max+wipe-cache=16M+wipe-deb.zip for 19.1 version but keep getting Error 1, see photo. Any help will be much appreciated. Thank you
Click to expand...
Click to collapse
Problem fixed. Now 19.1, pico gapps and Magisk 25.0 were flashed in success. The problem was that I didn't follow through the steps carefully described on the OP to increase the partition sizes as follows:
The file name actually configures the repit script.
Noted that you may have to toggle MTP Disable, Enable, Disable.
Noted that you may have to reboot into TWRP after disabling MTP.
Remember /tmp is wiped after a reboot. Copy repit to /sdcard and after rebooting back into TWRP, copy it from /sdcard to /tmp using TWRP File manager.
Noted that you may have to unmount cache and data.
Do NOT flash repit from USB/OTG.
This is designed for a stock partition layout. If your device has been modified and a vendor partition was created, REPIT will not work.

greenleaves said:
Problem fixed. Now 19.1, pico gapps and Magisk 25.0 were flashed in success. The problem was that I didn't follow through the steps carefully described on the OP to increase the partition sizes as follows:
The file name actually configures the repit script.
Noted that you may have to toggle MTP Disable, Enable, Disable.
Noted that you may have to reboot into TWRP after disabling MTP.
Remember /tmp is wiped after a reboot. Copy repit to /sdcard and after rebooting back into TWRP, copy it from /sdcard to /tmp using TWRP File manager.
Noted that you may have to unmount cache and data.
Do NOT flash repit from USB/OTG.
This is designed for a stock partition layout. If your device has been modified and a vendor partition was created, REPIT will not work.
Click to expand...
Click to collapse
Edit: NVM, i used restock to start fresh, and it all went fine. I've had this table kicking around long enough that I'm sure something was done that sysrepartundo couldn;'t undo.
How did you actually fix it? I ran sysrepartundo, am running it from the tmp folder with mtp disabled and nothing mounted, and still getting error 1. I've double check, all my partition sizes are stock.. I've been at this a few hours now and am getting frustrated.

theistus said:
I ran sysrepartundo, am running it from the tmp folder with mtp disabled and nothing mounted, and still getting error 1. I've double check, all my partition sizes are stock.. I've been at this a few hours now and am getting frustrated.
Click to expand...
Click to collapse
sysrepartundo is ancient and useless nowadays, try sysrepart-stock instead

Thank you for the script. I was able to repartion my flo and make it compatible with android 12L. Everything went smooth after realising (and correcting this mistake) that i"ve been putting the .zip inside /sdcard/tmp instead of /tmp (I was getting error 1 in TWRP).
During instalation process i"ve connected flo to charger and it indeed charged during repartition process
Things i"ve noticed
- TWRP appeared to be very laggy during repit process and took several seconds to reconginse the charger (to show to + sign next to the battery % to be precise)
- after device rebooted to stock 6.0.1, MTP didn"t work correctly. It appeared in my computer as "Nexus 7", but was completely empty. One more reboot (this time got short loading toast of "android is updating") and internal memory was visible from computer again

THANKS! It worked great for me also. I have mentioned it in the [GUIDE/TUTORIAL/HOWTO] Google Nexus 7 2013 Stock to Android 12 Tutorial.

Hi,
I had used @followmsi's sysrepart_1280_120.zip some time ago.
Now I'm interested in @followmsi's lineage 19.1 and want to use your lanchon-repit-20210221 script for increasing the system partition again.
Would you still consider the partition layout as stock, so I could use your script ? (See attachments)
And do I need a PC as the USB port is inoperative, so no way to connect to a PC?
Thank you very much in advance!

curiousde2002 said:
Hi,
I had used @followmsi's sysrepart_1280_120.zip some time ago.
Now I'm interested in @followmsi's lineage 19.1 and want to use your lanchon-repit-20210221 script for increasing the system partition again.
Would you still consider the partition layout as stock, so I could use your script ? (See attachments)
And do I need a PC as the USB port is inoperative, so no way to connect to a PC?
Thank you very much in advance!
Click to expand...
Click to collapse
You should be good to go.
Using one of the older (re)partitioning methods did not affect the partition table too much.
The note about a stock partition layout is mainly for users who used a (re)partition script that adds a separate vendor partition.
Cheers.

ipdev said:
You should be good to go.
Using one of the older (re)partitioning methods did not affect the partition table too much.
The note about a stock partition layout is mainly for users who used a (re)partition script that adds a separate vendor partition.
Cheers.
Click to expand...
Click to collapse
Would you recommend any precautions like putting files like restock on my device before running your script as I cannot connect to PC?
Thanks a lot for your help!

hi, i need some help, after using this script i can't seem to install any rom, i just can't format or mount any of my partitions, and sideload stops at some random %, anything i can do to restore? i backed up all files advised.

Hello, i'm having trouble installing Android 12L on my Nexus 7. I simply cannot get lanchon-repit to flash. It wont work, no matter how often I follow the steps and how thorougly I follow the guide. I tried everything. Already restored to "fabric-partitions" so on and so forth.
I'm constantly getting Error 1. I'm slowly losing my mind here.
Kind regards hoping for an answer
septchy
edit: also constantly says partition #30 not found.

I'm getting the following errors on flo:
Code:
FATAL: partition #31 unexpected
[ERROR 1]
Any ideas? Thanks