So i have Lenovo K3 (K30 W) and there is a problem!
The smartphone is restarting with logo. When i press the Volume + and Power button i go to a menu.
It shows that Volume+ is for choosing between the options (Recovery; Fastboot; Normal) while Volume- is for OKAY.
But when i press Volume- to select fastboot it does nothing. But the key should be working!
When i put the usb cable on the phone attached to the pc it shows the battery without to charge it.
I have installed drivers for the phone, but cant connect the phone with the pc and cant flash it.
I tried SPflashtool with rom for A6000 cuz i cant find rom for K3 with scatter file.
The main problem is that i cant reach fastboot because of the Volume- button.
Any ideas will be appreciated.
Also if somebody have rom with scatter file i'll be glad.
I hope that's a right place for the topic because i saw that the chipset and the CPU are the same as A600
Use qfil method
-Sourav_8434
Related
Hi,
Can anybody reply the steps to hard reset Idea ZTE Blade. My mobile is struck at start up screen android logo.
Tried multiple ways to unlock .... home + vol up + power... but no use.
Tried to connect system, but system is not recognized as a usb device.
Please reply imm...if anybody have the solution.
Thanks
sri
Assuming you have cwm installed, did u try volume- and power?
QuantumFoam said:
Assuming you have cwm installed, did u try volume- and power?
Click to expand...
Click to collapse
Actually i have installed z4root and rom manager, then tried to install new custom ROM using CWM. It is started and and rebooted once and showed some command line agruments and then again tried to reboot. But it got struck at green andriod logo white background screen.
Tried all possibilities to reboot recovery mode (home + vol + power, vol - + power, vol + + power, ...) But no use.
And also tried one more also, installed sdk in fastboot. but my mobile is not recognizing. showing waiting for devices for hours when i run "fastboot reboot".
If do you have any other solution please let me know immm..
Thanks
sri
h**p://wwwen.zte.com.cn/endata/mobile/India/
h**p://wwwen.zte.com.cn/endata/mobile/India/India_SoftWare/201205/P020120521626244417125.zip
This is the original bin file for idea blade. Download this file and put image.bin file in image folder of sd card. and then power on holding the vol+ and menu buttons.
Kindly check this
h**p://www.modaco.com/topic/356286-official-imagebin-for-idea-blade-stock-rom-tpt-from-zte/
Thanks it worked menu +vol+ +power.
But struck at 75% error.
any other image file.
I have a Lenovo S860 was hard bricked because of flashing a wrong ROM.
The condition now is:
- It is dead. When Plug in USB the indication in the phone showing Red LED (like charging status). No Android logo display (only blank screen)
- Plug in to PC. The PC is able to detect the USB as "MediaTek PreLoader USB VCOM Port (COM7)
What I have tried:
- Flash tool ver.5.1348.0.100 and ver. to flash Factory ROM Failed with error: "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)"
- Press Vol+ button then connect USB --> No response
- Press Vol+ and power button --> No Response
- Press Vol+, Vol- and Power Button --> No Reponse
- Press Vol-, Power button --> No Response
Please kindly help me to solve the problem.
Thank you very much.
rusdijanto said:
I have a Lenovo S860 was hard bricked because of flashing a wrong ROM.
The condition now is:
- It is dead. When Plug in USB the indication in the phone showing Red LED (like charging status). No Android logo display (only blank screen)
- Plug in to PC. The PC is able to detect the USB as "MediaTek PreLoader USB VCOM Port (COM7)
What I have tried:
- Flash tool ver.5.1348.0.100 and ver. to flash Factory ROM Failed with error: "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)"
- Press Vol+ button then connect USB --> No response
- Press Vol+ and power button --> No Response
- Press Vol+, Vol- and Power Button --> No Reponse
- Press Vol-, Power button --> No Response
Please kindly help me to solve the problem.
Thank you very much.
Click to expand...
Click to collapse
You can maybe try the ROM and steps available at this link
http://www.needrom.com/mobile/lenovo-s860/
and let me know if it worked. I also have the same phone and it may help if I mess up in the future.
I have the same problem with my S860 also. Please hep me to save my phone, it just was bought on 1-jun.
try
tigerss said:
I have the same problem with my S860 also. Please hep me to save my phone, it just was bought on 1-jun.
Click to expand...
Click to collapse
SP_Flash_Tool_v3.1328.0.183
+
S860_S122_140405
Lenovo S860 hard bricked
rusdijanto said:
I have a Lenovo S860 was hard bricked because of flashing a wrong ROM.
The condition now is:
- It is dead. When Plug in USB the indication in the phone showing Red LED (like charging status). No Android logo display (only blank screen)
- Plug in to PC. The PC is able to detect the USB as "MediaTek PreLoader USB VCOM Port (COM7)
What I have tried:
- Flash tool ver.5.1348.0.100 and ver. to flash Factory ROM Failed with error: "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)"
- Press Vol+ button then connect USB --> No response
- Press Vol+ and power button --> No Response
- Press Vol+, Vol- and Power Button --> No Reponse
- Press Vol-, Power button --> No Response
Please kindly help me to solve the problem.
Thank you very much.
Click to expand...
Click to collapse
I have the same problem. Did somebody fix it?
Borneo
Africaans said:
I have the same problem. Did somebody fix it?
Click to expand...
Click to collapse
did you already fix it???
Repair Hard Bricked Lenovo s860
alazharr said:
did you already fix it???
Click to expand...
Click to collapse
Hi!
I don't know if you've already fixed this issue, but last night I managed to resolve this!. My lenovo s860 had the same symptoms as described above. My PC didn't recognise the device when it was connected with an USB cable. This is what I did:
1.) I bought an JIG. The revival didn't work like the Samsung phones, but it does make the battery unloaded.
2.) Unload the battery by placing the Jigg about 8 hours
3.) Install the MTK drivers (when not already installed)
4.) Download the original Lenovo s860 Rom and Flash tool by clicking this link (It took a while to download the whole file... ):
forum . etbuying . com / viewtopic . php ?f=18&t=4017&sid=6e8f4a06df858bf1f2f27b7c02be56e5
5.) Password = "et"
6.) Open Flash tool and try to set the standard language to English (Hint: use the Chinese .pdf file to locate the language settings)
7.) Open scatter file in the Lenovo Rom map
8.) Choose "Firmware Upgrade" in the pull down menu
9.) The row with "user data" has no path filled. Choose the same path as the other files (select the "user data.bin" file).
10.) Click Download/Start
11.) Connect your unloaded phone to your PC with the USB cable. and the download+installation of the firmware will start
The same problem
My Lenovo S860 is detected by the computer, but SP Flash Tool does not start transfering the files to my phone. It does nothing when pressing power button or power + volume up + volume down. It is a shame that Lenovo did not instal a reset button on this phone.
als1 said:
My Lenovo S860 is detected by the computer, but SP Flash Tool does not start transfering the files to my phone. It does nothing when pressing power button or power + volume up + volume down. It is a shame that Lenovo did not instal a reset button on this phone.
Click to expand...
Click to collapse
Have you tried the Flashtool and Rom from my link (remove spaces) ?
I saved my S860
Africaans said:
I have the same problem. Did somebody fix it?
Click to expand...
Click to collapse
Watch this video man... If you backup your system before brick, then you are very very lucky... Just like me
Search this on youtube "How to Push Files to Recovery Using ADB!" by Mark Sohan and you will solve the problem
Hi,
I'm not sure what happened but phone now can't boot, can't enter recovery, can't flash any ROM.
Just red light when connected to usb power.
None of the propositions worked. Does anyone has better suggestion?
_HEnRY_ said:
Hi,
I'm not sure what happened but phone now can't boot, can't enter recovery, can't flash any ROM.
Just red light when connected to usb power.
None of the propositions worked. Does anyone has better suggestion?
Click to expand...
Click to collapse
Just hold power button until it reboot again
Just wait for 1-2 days until it ran out of battery power then you can start flashing back the original firmware. Just follow exactly the instruction of flashing a firmware using SPTools.
s860..
i`ll had same problem.. cant turn on .. only red light when usb connected.. go to phone shop they keep say IC problem.. no logo lenovo show juz blank screen and pc dont detect my hp..
Solved This Problen (Unbrick S860 Deadboot)
I've found a way to solve this period. It turned out very easy. It turns out if you experience your S860 deadboot (hh dead condition, and just out the red glowing led) just remove your casing and just pull the battery connector and flash again using flash tool. Then say it is done. Hope this helps you all
Hi, I tried everything but my s860 is freezing at 26-30% while flashing stock rom, tried several links, with or without battery, several different versions ot SP Flash tools, every time around 330mb freezes. Can u give me some rom which is smaller 300mb so I can try flash it?
Whicj screw/screwdriver do i need?
Hello all, please help me !!!
i have problem, my zenfone 5 stuck on "intel inside" logo. i already test with xFSTK application, but the result still same (Back to intel inside logo).
Sorry my english is bad. Thank's before
Hey buddy,
Download the stock firmware 2.22.40.44. Extract recovery.img from the file. Also download other firmwares after this update. Now turn off your phone. Now turn on by pressing vol+ button and power button at the same time. Now flash the recovery.img. Now turn off the mobile and enter recovery mode by pressing vol - and power button at the same time. Wait till recovery mode comes up. Now if you see no command screen or just an exclamatory mark press vol - and + at the same time amd hold for 5 seconds. Now factory reset once.Now you'll see few options. Now in your pc place all the rom zip files in the fastboot folder. Now select update via adbsideload option. Now first sideload 2.22.40.44 using the command (sideload ROMNAME.zip). As soon as it completes turn off the phone return to recovery mode and sideload other firmwares till 2.22.40.54. Now turn on the phone. Wait till it loads up. Now if you want to update to lollipop, copy the lollipop rom files into internal sd card. Now disconnect data cable. It'll ask for update. That's it. Think this'll help you.
Diharja said:
Hello all, please help me !!!
i have problem, my zenfone 5 stuck on "intel inside" logo. i already test with xFSTK application, but the result still same (Back to intel inside logo).
Sorry my english is bad. Thank's before
Click to expand...
Click to collapse
Try to use debrick tool
Sent from my ASUS_T00F using XDA-Developers mobile app
i just wanted my zuk phone to get back to the stock rom ,...i tried http://forum.xda-developers.com/zuk-...ofrio-t3332563 Tool to flash stock rom ,.. the rom installed succesfully but when i tried to reboot my phone ,..i ended up with zuk boot logo ,..even i cant access fastboot by vol + pwer .....any solutions !
If there is no access to fastboot, the QPST rom files and QFIL tools is the only go for you now. Search the forums, there is a lot of information on this tool.
siva prakash said:
i just wanted my zuk phone to get back to the stock rom ,...i tried http://forum.xda-developers.com/zuk-...ofrio-t3332563 Tool to flash stock rom ,.. the rom installed succesfully but when i tried to reboot my phone ,..i ended up with zuk boot logo ,..even i cant access fastboot by vol + pwer .....any solutions !
Click to expand...
Click to collapse
I brick my zuk the first day . wait to battery out and screen off now press vol+ vol - and connect to the wallcharger any seconds disconect and use QFil see tutorials on the web , vol+ and connect and you can enter to fastbot and flash stock rom .
xdddd23 said:
I brick my zuk the first day . wait to battery out and screen off now press vol+ vol - and connect to the wallcharger any seconds disconect and use QFil see tutorials on the web , vol+ and connect and you can enter to fastbot and flash stock rom .
Click to expand...
Click to collapse
Hey mate no need , i managd to power off my mobile some how ,..now i can force my phone into fast boot directly by pressing vol up +down at same ,..now my mobile is completely stock and i can receive and update OTA
siva prakash said:
Hey mate no need , i managd to power off my mobile some how ,..now i can force my phone into fast boot directly by pressing vol up +down at same ,..now my mobile is completely stock and i can receive and update OTA
Click to expand...
Click to collapse
Hey,
I used a tool to get my phone back to stock, as i had bricked it in the past.
now i get the zuk logo when i turn the phone on and its stuck at that. nothing happens when i press vol up or down or anything.
any help please?
Hello dear forum users. Help me to repair Samsung gt-i9500 phone. The phone turns on but it does not boot beyond the logo. It is impossible to turn off the phone either. I have to remove the battery to turn it off. I wanted to do a hard reset, but it didn't work either. I went into factory mode, but the on / off button just does not work there to select menu items. There are 6 items in factory mode menu: 1)Full test 2) Item test 3)Test report 4)clear eMMC 5)version 6)reboot. I read on the Internet that clear eMMC is a hard reset, but I can’t choose. The phone does not respond to pressing the on/off button to select. The phone does not respond when trying to select other items too. I have googled that i need to flash the phone in this case. I connected the phone to the computer using a usb cable. Installed the driver.I entered factory mode on the phone.Phone is successfully recognised by Windows. I downloaded sb flash tool and downloaded one of GT-i95** MT6575 roms also.I have launched sp flash tool and choosed scatter file from rom folder that i have downloaded and pressed download button. But process didnot started and nothing happened. Sp flash tool didnot started process.I have attached screenshot of device info from Skipsoft Android Toolkit. I dont know why it have strange serial number . Maybe someone tried to repair it but unsuccessfully or i dont know.I can run adb on this device and can view files on this device with adb. I dont know how to get root on this device with only adb option to interact with device.I cannot get to download mode also . It shows me red triangle with exclamation mark. In this screen i pressed on/off button + vol.up button to enter . No response to this from device.Also Windows didnot recognise device when i pressed vol.down + home+on/off .It shows unrecognised device in device manager.But in Factory Mode this device was recognised by Windows.So i stucked in repairing this device. So guys what to do next to repair this device ? thanks for answers.