Related
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
undulus said:
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
Click to expand...
Click to collapse
Hi, open ur phone again and check the display connector, try fully disconnecting it and reconnecting it and check if all other connectors in range are also properly connected. Then reassemble ur phone.
Next time, do not open your phone unless you really have to. I don't see why you have opened to reset it. You can press power for very long then after maybe 30 seconds or so, your phone will fully turn off. No need to open it for that.
Next time if you have a question, use the Q&A section, not this one. You'll get answers quicker there too.
Bricked or screen is broken
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
undulus said:
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
Click to expand...
Click to collapse
if that worked, i'd be curious to know
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
bpodnar said:
You have to put the device to qualcomm download mode. You need to tear down usb cable and connect green and black wire then connect the cable to pc and to the phone which should be turned off (hold power button for 20 seconds) and keep connected for 10 seconds and then disconnect green and black wire. Now look under device manager and find under ports qualcomm 9008 com xy. Now you can flash original Mi A1 ROM through Mi flash tool. Rom has to be extracted to C:
Click to expand...
Click to collapse
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
mokahabashy said:
i tried this did not work
the PC can not recognise my phone
i just got my device vibration once evey 2 second
and no thing occur
Click to expand...
Click to collapse
Did you use usb 2.0 or 3.0? 3.0 is not good for this
bpodnar said:
Did you use usb 2.0 or 3.0? 3.0 is not good for this
Click to expand...
Click to collapse
i used usb 2
man my phone is fully dead boot
can not enter EDL mod or qualcom download mod
i tried make deep flash cable , it did not work
when i connect any usb to my mobile , even the charger i got my device vibrated every 2 second
i have to force it to EDL mod without using any cable
i have a question : i rooted the phone , so when i send it to warranty center would they know that i rooted my phone ?
what should i tell them ?
I think the service cannot detect that your phone is rooted because they cant turn it on. If they flash it from scratch the root will be gone.
Bro your phone opening case and Google search testpoint
---------- Post added at 01:34 AM ---------- Previous post was at 01:33 AM ----------
---------- Post added at 01:35 AM ---------- Previous post was at 01:34 AM ----------
My devices is not flashing and not edl cable test point is working only miphone 64 download and flashing 7.8.23 rom and devices is back bro
mokahabashy said:
I flashed mi 5x rom on mi A1 with edl cable
now i got my A1 bricked
No fast boot , no recovery , no edl
when i connect it with charger or with pc i got vibration with blinking of LED notification but the screen never turn on
when i connect it to PC . it show no thing
Please help !!!
Click to expand...
Click to collapse
Same happened with me....
Shubham2509 said:
Same happened with me....
Click to expand...
Click to collapse
Same did you get any solution?
Haseeb Ahmed Khan said:
Same did you get any solution?
Click to expand...
Click to collapse
I gave my phone to service center
Shubham2509 said:
I gave my phone to service center
Click to expand...
Click to collapse
did they fix it? or gave you a new one?
Haseeb Ahmed Khan said:
did they fix it? or gave you a new one?
Click to expand...
Click to collapse
Fix
Shubham2509 said:
Fix
Click to expand...
Click to collapse
There is another way directly on Miforum app. Basically you need to open back housing and short 2 cantacs. More you can read at Miforum when you search for Unbrick MI A1
Nice story, important lesson, note to self:
"Google more" (so you don't have to pay the service center so they do it for you and charge you a lot of moneyz)
I got stuck in TWRP bootloop so was using the MSM tool and I didn't think it was reading my phone because it said waiting for device for maybe 5 seconds. I decide to stop it and check the connection but a split second before I clicked stop it started to run. I didn't think it was a big deal so I started the process but it returned an error. So I disconnected the phone from my PC and reconnected but now my PC doesn't recognize my phone. It shows it in device manager but says "Unknown USB Device(Device Descriptor Request Failed)". Did I hard brick my phone or is there a solution?
Also, the phone does nothing now. Won't turn on at all.
Can't you reboot on fastboot mode in twrp?
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
ivanrom said:
Can't you reboot on fastboot mode in twrp?
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
Click to expand...
Click to collapse
No. It won't do anything :/
When I plugged it into my PC it doesn't know what it is. I tried reinstalling the drive but that doesn't work.
imucarmen said:
No. It won't do anything :/
When I plugged it into my PC it doesn't know what it is. I tried reinstalling the drive but that doesn't work.
Click to expand...
Click to collapse
You also tried Powerbutton and volume up so you can come into Fastboot?
sakerhetz said:
You also tried Powerbutton and volume up so you can come into Fastboot?
Click to expand...
Click to collapse
OH wow! It just worked. I tried before but guess I didn't hold it long enough. Just saw your reply and decided to try again but this time held it for like 20 seconds and it came on. It's in TWRP now. Maybe now that it booted up to TWRP if I cut it off it might run the MSM tool. Although it would be great to get my Havoc backup restored.
Fixed.
I'm an idiot who didn't hold the buttons long enough. Getting it to boot to TWRP by using volume+ and power (held for over 20 seconds) I turned the phone back off and ran the MSM tool.
imucarmen said:
Fixed.
I'm an idiot who didn't hold the buttons long enough. Getting it to boot to TWRP by using volume+ and power (held for over 20 seconds) I turned the phone back off and ran the MSM tool.
Click to expand...
Click to collapse
Nice to read this good luck
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
imucarmen said:
I decide to stop it and check the connection but a split second before I clicked stop it started to run. I didn't think it was a big deal so I started the process but it returned an error. So I disconnected the phone from my PC and reconnected but now my PC doesn't recognize my phone. It shows it in device manager but says "Unknown USB Device(Device Descriptor Request Failed)". Did I hard brick my phone or is there a solution?
Click to expand...
Click to collapse
Ha, I just did the same thing a few days ago!
Glad you got yours going again!
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Cat8191 said:
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Click to expand...
Click to collapse
did you able to fix it
Cat8191 said:
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Click to expand...
Click to collapse
i have same problem, no support for this
omg thank god it worked -.-
"Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again." - https://forum.xda-developers.com/t/...ecovery-no-fastboot-no-signs-of-life.3534512/
please good tutorial how to do that without this mediatek bypass and sp flash tool...
My M3 was working perfectly. I put it to restart and then it didn't turn on anymore. It is now only recognized as "Qualcomm HS-USB QDLoader 9008" on Windows. I opened the phone and with some magical combination (remove/connect flat cables from the battery and display, connect the USB cable, press volume keys and short the test points) it started in fastboot. So I was able to flash the "fastboot ROM". Unfortunately, on the next boot it still does not turn on normally. Has anyone succeeded in repairing the Poco M3? In Mi Flash is requested an authenticated account to flash through it, is it worth paying someone to provide the account? Does anyone have the contact of someone who makes cheap? Any help is welcome, thank you!
me too
waiting, someone pls
LeandroFarias said:
waiting, someone pls
Click to expand...
Click to collapse
I kind of managed to get my Poco M3 to start on Android (but it's not fully fixed).
That is the points
vinod3362 said:
That is the points
Click to expand...
Click to collapse
What?
me too. after i reboot my poco m3. it came to black and wont boot up. i google everything, the only need to flash is to modified the firehose. badly needed.
KaMyKaSii said:
My M3 was working perfectly. I put it to restart and then it didn't turn on anymore. It is now only recognized as "Qualcomm HS-USB QDLoader 9008" on Windows. I opened the phone and with some magical combination (remove/connect flat cables from the battery and display, connect the USB cable, press volume keys and short the test points) it started in fastboot. So I was able to flash the "fastboot ROM". Unfortunately, on the next boot it still does not turn on normally. Has anyone succeeded in repairing the Poco M3? In Mi Flash is requested an authenticated account to flash through it, is it worth paying someone to provide the account? Does anyone have the contact of someone who makes cheap? Any help is welcome, thank you!
Click to expand...
Click to collapse
how do you get into fastboot?? i tried mine but it wont boot in fastboot. i'm stuck in QDLoader.
did someone successfully recover their bricked poco m3 ?
gasleak08 said:
did someone successfully recover their bricked poco m3 ?
Click to expand...
Click to collapse
nothing yet. we need firehose to bypass miflash authentication. or drain the battery then press vol down + power for 10secs.
KaMyKaSii said:
I kind of managed to get my Poco M3 to start on Android (but it's not fully fixed). Are you Brazilian too? Call me on telegram
Matheus
You can contact @MatheusCoelho1998 right away.
t.me
Click to expand...
Click to collapse
can u tell me how?mine too?
my phone has bricked with UBL condition and i flash whole partition with twrp and magisk to solve the heating problem now its alive again
I just wait till the battery totally discharge and then plug in the charger,sofar been through this problem for 2x,the first one for 2 days and 5 days for later because the battery was full.
This happens when Im restarting the device and now even there is a new update,Im still scare to update my device to the latest firmware incase it wont boot again.
Should I try to update or nah,guys?
Minoda86 said:
I just wait till the battery totally discharge and then plug in the charger,sofar been through this problem for 2x,the first one for 2 days and 5 days for later because the battery was full.
This happens when Im restarting the device and now even there is a new update,Im still scare to update my device to the latest firmware incase it wont boot again.
Should I try to update or nah,guys?
Click to expand...
Click to collapse
do not try to update it... i tried 3 times their own ota update broke the phone os which makes it unable to go to recovery or fastboot. i will try and see if i can update firmware and fix itself
yankee77 said:
do not try to update it... i tried 3 times their own ota update broke the phone os which makes it unable to go to recovery or fastboot. i will try and see if i can update firmware and fix itself
Click to expand...
Click to collapse
I did update it and now my phone wont boot at all,after the battery hits 1%,it just wont do anything and its been 2 weeks,pc does detect it as qualcom loader but flashing without auth wont work,Im just waiting for firehose file for this stupid phone.People with auth asking for $30 for fixing it but without guarantee that it will work,what a joke.
So did you fix your phone?
yankee77 said:
do not try to update it... i tried 3 times their own ota update broke the phone os which makes it unable to go to recovery or fastboot. i will try and see if i can update firmware and fix itself
Click to expand...
Click to collapse
Yeahhh,my phone finally boot up!
But sadly the latest update failed to install.Guess I should just wait until someone patch the firehose file and try not to update until then.Fingercross!
i fixed the deadboot issue. but it wont fix the restart deadboot. try to flash every region and version firmware both recovery and fastboot. the problem still there.
vinzikidz said:
i fixed the deadboot issue. but it wont fix the restart deadboot. try to flash every region and version firmware both recovery and fastboot. the problem still there.
Click to expand...
Click to collapse
how did u fix deadboot can you elaborate? how did you flash from edl ?
gasleak08 said:
how did u fix deadboot can you elaborate? how did you flash from edl ?
Click to expand...
Click to collapse
sorry, there's is no tutorial for this and it has a quite process. you just need to throttle the proc temperature of your phone board using hot blower or any device you have. while your phone is in high temp. both pin board and battery is in unplug hold vol down then put back the board pin and battery pin at the same time. it will vibrate and fastboot will be fine.
Guys this is my procedure to turn on the phone:
I can make it turn on Android after messing with the battery and sub-board cables but this is just a workahound, trying to turn it on normally through the power button always makes it turn on in edl mode
But opening the device voids the warranty, so anyone who has access to a repair center is better off asking for the warranty
What to do:
1. Disconnect the battery cable and the secondary board cable.
2. Connect charger.
3. Hold the power button.
4. Connect the secondary board cable and quickly connect the battery cable.
5. Release the power button when the device vibrates.
It doesn't always work the first time, you may need several tries to get it
VID_20210514_152510.mp4
drive.google.com
So earlier, I unlocked my Redmi 9T phone using the Xiaomi Official Tool, then flashed TWRP using XiaoMiTool V2, I opened cmd and entered fastboot reboot recovery, it's still in fastboot mode, I tried Power button + volume buttons and still stuck on fastboot and before it boots into fastboot again, it shows a charging battery icon. I plugged in my phone to my pc and selected "My phone is bricked" in XiaoMiTool V2 and waited for 1 hour to finish the download, it tries to install but when it gave me an error, I closed it and tried to reboot my phone, NOW IT'S SHOWING A CHARGING BATTERY ICON AND CAN'T DO ANYTHING! I keep turning on my phone but it only shows the battery and turns itself off quick. PC/ADB can't detect any, can't boot into fastboot, can't boot into system, can't boot into recovery. Please help me, I'm gonna get in BIG trouble. Please help me... Thanks!
Schon Villamor said:
So earlier, I unlocked my Redmi 9T phone using the Xiaomi Official Tool, then flashed TWRP using XiaoMiTool V2, I opened cmd and entered fastboot reboot recovery, it's still in fastboot mode, I tried Power button + volume buttons and still stuck on fastboot and before it boots into fastboot again, it shows a charging battery icon. I plugged in my phone to my pc and selected "My phone is bricked" in XiaoMiTool V2 and waited for 1 hour to finish the download, it tries to install but when it gave me an error, I closed it and tried to reboot my phone, NOW IT'S SHOWING A CHARGING BATTERY ICON AND CAN'T DO ANYTHING! I keep turning on my phone but it only shows the battery and turns itself off quick. PC/ADB can't detect any, can't boot into fastboot, can't boot into system, can't boot into recovery. Please help me, I'm gonna get in BIG trouble. Please help me... Thanks!
Click to expand...
Click to collapse
You have missed the subforum:
This is here for Mi 9T /Redmi K20
You are asking about Redmi 9T
That's totally different name, phone model, hardware, Android version.
After all, your phone model is about two years newer than our Mi 9T here
Specially you made a big mistake if you maybe downloaded and flashed the TWRP for Mi 9T/Redmi K20 to your Redmi 9T, and bricked your phone
One needs to be careful about the phone models!!!
zgfg said:
You have missed the subforum:
This is here for Mi 9T /Redmi K20
You are asking about Redmi 9T
That's totally different name, phone model, hardware, Android version.
After all, your phone model is about two years newer than our Mi 9T here
Specially you made a big mistake if you maybe downloaded and flashed the TWRP for Mi 9T/Redmi K20 to your Redmi 9T, and bricked your phone
One needs to be careful about the phone models!!!
Click to expand...
Click to collapse
I apologize, I did not know that they're different, but how can I fix this?
Schon Villamor said:
I apologize, I did not know that they're different, but how can I fix this?
Click to expand...
Click to collapse
Generally, you should be able to fix by flashing the stock firmware via MiFlash again
But if you also locked your Bootloader by using the MiFlash last time, you will not be able to flash anything and you will need to seek around for the paid EDL support
Better ask on the XDA (sub)forum for your Redmi 9T:
Redmi 9 Power / 9T
The Redmi 9 Power is a 6.53" phone with a 1080x2340p resolution display. The Qualcomm SM6115 Snapdragon 662 chipset is paired with 4GB of RAM and 65/128GB of storage. The main camera is 48+8+2+2MP and the selfie camera is 8MP. The battery has a 6000mAh capacity.
forum.xda-developers.com
zgfg said:
zgfg said:
Generally, you should be able to fix by flashing the stock firmware via m
zgfg said:
Generally, you should be able to fix by flashing the stock firmware via MiFlash again
But if you also locked your Bootloader by using the MiFlash last time, you will not be able to flash anything and you will need to seek around for the paid EDL support
Better ask on the XDA (sub)forum for your Redmi 9T:
Redmi 9 Power / 9T
The Redmi 9 Power is a 6.53" phone with a 1080x2340p resolution display. The Qualcomm SM6115 Snapdragon 662 chipset is paired with 4GB of RAM and 65/128GB of storage. The main camera is 48+8+2+2MP and the selfie camera is 8MP. The battery has a 6000mAh capacity.
forum.xda-developers.com
Click to expand...
Click to collapse
How can I flash when my phone can't boot into fastboot? Can't boot into anything, it just shows the battery charge screen when I turn it on (even without plugging it in a charger). I have my bootloader unlocked
Click to expand...
Click to collapse
Click to expand...
Click to collapse
But you can ask in the right XDA subforum for your phone - where somebody familiar with your device could help you, or you cannot (or you don't want)?!
If you hard bricked your phone then you will need to find somebody to help you with the paid EDL account - usually they cannot advertise on XDA since advertising the paid support is forbidden. You should seek around on TG channels and so
That was the last my answer for you. Cannot help you better for your different phone. Good luck