Database Users

[REF][SCRIPTS] Android Optimization Tips - Captivate(UPDATED 10/19/2011)

Introduction
I've made a Definite Guide on Android thread for i9000 that focuses on a few optimizations/scripts I've picked up over the months I've spent on XDA. I truly enjoyed sharing my knowledge with the i9000 community and since the tips/guide/scripts can also be applied here (save some exceptions that I would list down below),I would like to share this with the Captivate community too.
Exceptions
Take note that the guide is primarily for i9000 units. There are a few differences I can note here that you should be aware of:
1. The guide points out some kernels/ROMs that are for i9000. Hence the phones you are using may have different ROMs/kernels that may or may not correlate with the one in the guide.
2. The guide also mentions some apps/tweaks that are particularly alien to your unit and you may have never encountered it in your use of your phone or in XDA. Please ignore them for now, I'll make an effort to make the guide compatible in the future (with feedback from you guys of course )
3. Journaling scripts that are attached like the JournalingOn.zip and Acid Tweaks - Removed Useless Stuff and 00remount may not work well with your unit or it may completely brick it. I don't know this, but if you can post your mount partition configuration, I am willing to make the scripts work for you. You only have to type "mount" on your Terminal Emulator and provide the output to me, and I'll provide the rest. Zach's script however, have high compatibility towards a lot of phones, and thus can be used for your unit. Take note that there is a slight risk that it won't work well. If it doesn't, please post your problems here, and I'll try to fix it. Hence, it's best that you make a nandroid backup before attempting to use any tweaks here.
3. I've compiled a guide on a few notable tweaks in XDA here: LINK. If you would like me to evaluate scripts/tweaks/anything that you do not understand due to their terms being alien to you, I'll be glad to explain it here
Guide
You can refer to the guide here:
LINK

pikachu01 said:
Introduction
I've made an Android Optimization Tips thread for i9000 that focuses on a few optimizations/scripts I've picked up over the months I've spent on XDA. I truly enjoyed sharing my knowledge with the i9000 community and since the tips/guide/scripts can also be applied here (save some exceptions that I would list down below),I would like to share this with the Captivate community too.
Exceptions
Take note that the guide is primarily for i9000 units. There are a few differences I can note here that you should be aware of:
1. The guide points out some kernels/ROMs that are for i9000. Hence the phones you are using may have different ROMs/kernels that may or may not correlate with the one in the guide.
2. The guide also mentions some apps/tweaks that are particularly alien to your unit and you may have never encountered it in your use of your phone or in XDA. Please ignore them for now, I'll make an effort to make the guide compatible in the future (with feedback from you guys of course )
3. Journaling scripts that are attached like the JournalingOn.zip and Acid Tweaks - Removed Useless Stuff and 00remount may not work well with your unit or it may completely brick it. I don't know this, but if you can post your mount partition configuration, I am willing to make the scripts work for you. You only have to type "mount" on your Terminal Emulator and provide the output to me, and I'll provide the rest. Zach's script however, have high compatibility towards a lot of phones, and thus can be used for your unit. Take note that there is a slight risk that it won't work well. If it doesn't, please post your problems here, and I'll try to fix it. Hence, it's best that you make a nandroid backup before attempting to use any tweaks here.
3. I've compiled a guide on a few notable tweaks in XDA here: LINK. If you would like me to evaluate scripts/tweaks/anything that you do not understand due to their terms being alien to you, I'll be glad to explain it here
Guide
You can refer to the guide here:
LINK
Click to expand...
Click to collapse
can this work on stock rom？

q659503934 said:
can this work on stock rom？
Click to expand...
Click to collapse
Which tweak are you particularly interested in? Yes, they will work on stock ROM, but you could tell me which you are particularly interested in, and I can tell you how it would work

pikachu01 said:
Which tweak are you particularly interested in? Yes, they will work on stock ROM, but you could tell me which you are particularly interested in, and I can tell you how it would work
Click to expand...
Click to collapse
the Script tweaks，i think it's most usefull

q659503934 said:
the Script tweaks，i think it's most usefull
Click to expand...
Click to collapse
The script tweaks can be used in a stock ROM, but you would need a custom kernel that supports init.d.

pikachu01 said:
The script tweaks can be used in a stock ROM, but you would need a custom kernel that supports init.d.
Click to expand...
Click to collapse
the post you published is helpful，ths

Well I sport your thread in my sig now, but nice to see you've made a thread for Capy users to get more exposure and discuss it.

Kyuta Syuko said:
Well I sport your thread in my sig now, but nice to see you've made a thread for Capy users to get more exposure and discuss it.
Click to expand...
Click to collapse
Thanks for the sig up
Yes, I would want to share this knowledge with as many people as possible. Thank you for helping my effort!

Great guide, just one problem, I've deleted the system apps you've written, and the notification bar is gone lol :S Do you have any clue which app is it?

Elad92 said:
Great guide, just one problem, I've deleted the system apps you've written, and the notification bar is gone lol :S Do you have any clue which app is it?
Click to expand...
Click to collapse
The only one I'm not confident at is Perso. That's why it's better to freeze it rather than delete it. Deleting it makes it harder to restore.
You can freeze it with System Tuner (free app) or Titanium Backup Pro (Paid)

Of course I was freezing, but a quick reboot solve the problem.. Thanks again for this great guide!
As for the memory leaks problem, can you explain more? Will I have to write those commands every time the phone is being laggy?

Elad92 said:
Of course I was freezing, but a quick reboot solve the problem.. Thanks again for this great guide!
As for the memory leaks problem, can you explain more? Will I have to write those commands every time the phone is being laggy?
Click to expand...
Click to collapse
Great
There's a script called drop in the 3rd post. You can use it with Script Manager once you feel the lag coming in. However, to get rid of the lag entirely, you have to tweak the LMK so that free memory doesn't drop below a certain threshold. You can use Auto Memory Manager or Supercharger for that.

Thanks, used this first way, created a nice widget that will do the script

pikachu, just wanted to let you know. Your scripts are incredible. The difference in battery life after adding the 2 scripts to init.d is incredible. I was going through the one. I'm on Apex 10.1 w/ TalonDev 0.5.1.3 was wondering if there would be any added benefit of changing the awake_governor to OnDemandX instead of Ondemand and if you could recommend any other fun things I can try that would be great also.
EDIT: Also still in my init.d is the s70_darky_zipalign scripted would it be recommended to remove that or keep it.

nh5 said:
pikachu, just wanted to let you know. Your scripts are incredible. The difference in battery life after adding the 2 scripts to init.d is incredible. I was going through the one. I'm on Apex 10.1 w/ TalonDev 0.5.1.3 was wondering if there would be any added benefit of changing the awake_governor to OnDemandX instead of Ondemand and if you could recommend any other fun things I can try that would be great also.
EDIT: Also still in my init.d is the s70_darky_zipalign scripted would it be recommended to remove that or keep it.
Click to expand...
Click to collapse
Yes, the VM settings actually save more battery as the number of I/O transactions are kept at the minimum.
You can change it to OndemandX, but OndemandX's main difference with Ondemand is the sleep code as well as the high threshold (95 opposed to 80 in Ondemand). This would result in a generally more powersaving but slower scaling method.
Since conservative is already used when sleeping, using OndemandX is counterproductive IMHO.
The darky zipalign script doesn't work as Darky rom doesn't come with the zipalign binary. You can zipalign with Rom Toolbox (in the market). Also 99.9% of APKs that are used are already zipaligned from the start(you can check this with Rom Toolbox). Don't need to zipalign again.

pikachu01 said:
Yes, the VM settings actually save more battery as the number of I/O transactions are kept at the minimum.
You can change it to OndemandX, but OndemandX's main difference with Ondemand is the sleep code as well as the high threshold (95 opposed to 80 in Ondemand). This would result in a generally more powersaving but slower scaling method.
Since conservative is already used when sleeping, using OndemandX is counterproductive IMHO.
The darky zipalign script doesn't work as Darky rom doesn't come with the zipalign binary. You can zipalign with Rom Toolbox (in the market). Also 99.9% of APKs that are used are already zipaligned from the start(you can check this with Rom Toolbox). Don't need to zipalign again.
Click to expand...
Click to collapse
I made a mistake here. Rom Toolbox doesn't zipalign your APKs well. It failed to detect an unzipaligned APK in my ROM. I will publish a guide to zipalign, but it's pretty much manually done.

Made some pretty big changes to the guide.
Please refer to it when you have the time!

Tell me what all governors are compatible with galaxy y?

basicly you don't need to build your own gov inside your kernel unless you want to modify the script. savie have make it for us. its save, quick, and easy for anyone. btw, the list is on repencis and savies kernel.

kurotsugi said:
basicly you don't need to build your own gov inside your kernel unless you want to modify the script. savie have make it for us. its save, quick, and easy for anyone. btw, the list is on repencis and savies kernel.
Click to expand...
Click to collapse
Thanks.. hotplug works on our phone!!??
Sent from my GT-S5360 using XDA

thats depend on the source. some govs like sakuractive basicly only work on cpu with hotplug feature. some other govs like lulzactive won't work without proper modification. you don't know untill you tried. btw, some tips. you don't need to copy the files then edit your kconfig and makefile anytime. in kconfig, set the gov name "gov1, gov2, gov3, etc". you'll also have to rename the source to cpufreq_gov1.c, cpufreq_gov2.c etc. do the same thing in makefile. when you want to test a source code, you'll only need to replace the script inside cpufreq_gov1.c (and friends) with the scritpt from the gov you want to test. in this way, you don't need to edit kconfig and makefile anytime you want to test a gov. when you've finished, you can edit the gov description on kconfig.

So far 22gov.. Not try from ur info kuro-kun..

savie said:
So far 22gov.. Not try from ur info kuro-kun..
Click to expand...
Click to collapse
22 gov but only a few useful
BTW Savie Rev 65 is so far so good:good:

@savie: only wheatley works on that github. sakuractive doesn't work. i've found some another "alien" govs but I'm just too lazy to test them. we only have 4 freq (3 really working) so no matter govs we us it won't show a significance performance differences.

Till now I have loaded 11 kernel in my kernel... I am free for testing any governor.
Sent from my GT-S5360 using XDA

kurotsugi said:
@savie: only wheatley works on that github. sakuractive doesn't work. i've found some another "alien" govs but I'm just too lazy to test them. we only have 4 freq (3 really working) so no matter govs we us it won't show a significance performance differences.
Click to expand...
Click to collapse
Dont know since when 468 working on 2freq 312-468 use interactive governor modified by irfan.. but i see when use that freq more than 30minuit.. at begining only show 468..

savie said:
Dont know since when 468 working on 2freq 312-468 use interactive governor modified by irfan.. but i see when use that freq more than 30minuit.. at begining only show 468..
Click to expand...
Click to collapse
i wish we know what is the 2/4 value so we can have 4 working freq....

our kernel partition size is limited. 11 is too much since basicly we only need three govs. 1 batt saving, 1 balanced, and 1 for performance stuff. we'd better to make use the space for different stuff like the driver or stuffs. I've found that our device is actually support v3d sync and framebuffer for better graphic quality. however, our kernel source is incomplete thus we can't use them properly (framebuffer is working but make the UI a lil bit slower-v3d sync couldn't compiled). we also have multimedia support for better video encode-decode and better sound quality. some of the wifi stuff isn't working but se still can use VLAN driver on it. the good news, all of them is working. you'll only need to add them to your kernel. the bad news, it takes more spaces. 1. it will be a burden for the ram if its too big. 2. we need more spacious room if we want to put cwm. thus, we must be wise with our kernel. for the additional govs I prefer to use modules since its is a good idea to make it easier and could give me more spaces.

kurotsugi said:
our kernel partition size is limited. 11 is too much since basicly we only need three govs. 1 batt saving, 1 balanced, and 1 for performance stuff. we'd better to make use the space for different stuff like the driver or stuffs. I've found that our device is actually support v3d sync and framebuffer for better graphic quality. however, our kernel source is incomplete thus we can't use them properly (framebuffer is working but make the UI a lil bit slower-v3d sync couldn't compiled). we also have multimedia support for better video encode-decode and better sound quality. some of the wifi stuff isn't working but se still can use VLAN driver on it. the good news, all of them is working. you'll only need to add them to your kernel. the bad news, it takes more spaces. 1. it will be a burden for the ram if its too big. 2. we need more spacious room if we want to put cwm. thus, we must be wise with our kernel. for the additional govs I prefer to use modules since its is a good idea to make it easier and could give me more spaces.
Click to expand...
Click to collapse
Where can I get modules of governor from??
Sent from my GT-S5360 using XDA

savie's thread. about gov and iosched modules

what about LionHeart?? How is it?

iPanther said:
what about LionHeart?? How is it?
Click to expand...
Click to collapse
Read this to clarify your doubts on governoers,ios and schedulers.

[KERNEL][08/03/2016][KK/LL][Shaky156-V1.1][OC - UV - GPUOC - 4K HDMI - FIOPS - XZ ]

This is the first custom kernel compiled for TegraNote 7 device. Alot of hard work has been put into this to make this possible.
DISCLAIMER
I am not responsible of your device gets damaged from flashing this kernel​
Features:​​
4 Main cores:
UV
OC - 2.1Ghz
Lp1 core:
Low Volt support
GPU 2D, 3D - 708Mhz
SDcard read and write speed increased
HDMI - 4k output
Thermal throttling tweaked
CPU boost upon touch disabled
Setting min and max of 1 core sets all cores min and max frequency
RAM Voltage lowered
Default schedular - FIOPS
Compiled with -mtune flag
Compatible with stock ROM
XZ (LZMA) compression
Much more
Change-log:
Installation:
1 - Download ZIP file
2. Reboot into TWRP recovery - (adb shell reboot recovery)
3. Install ZIP file, locate file and select to flash.
(Stock Kernel has been provided incase anyone would like to revert
Downloads:
Custom Kernel - KitKat: http://d-h.st/hr2
Custom Kernel - Lollipop: http://d-h.st/C7u2
Stock Kernel-4.4: http://d-h.st/68M
Stock Kernel-5.1:
Source-Code:
Nvidia - http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
GITHUB: https://github.com/Shaky156/Tegra-Note-7
​

Thank you Shaky for providing this kernel and for the hard work, I'll try to test this ASAP !

mouhii said:
Thank you Shaky for providing this kernel and for the hard work, I'll try to test this ASAP !
Click to expand...
Click to collapse
OP Updated with download link
Edit: will upload soon an updated kernel

OP Updated with new release! enjoy

Shaky156 said:
OP Updated with new release! enjoy
Click to expand...
Click to collapse
It's running..! Looking good so far
Sent from my TegraNote-P1640 using Tapatalk

pr0ners said:
It's running..! Looking good so far
Sent from my TegraNote-P1640 using Tapatalk
Click to expand...
Click to collapse
Yes updated OP last time with a newer download link:
Fixes Wi-Fi randomly disconnecting issue
Tested with 3dmark, 2000+ increase in score, >10% fps increase with gaming

Maybe just my end as i have xposed framework & gravity box, but auto rotate doesn't work so well, stays fixed on initial orientation.
Sent from my TegraNote-P1640 using Tapatalk

pr0ners said:
Maybe just my end as i have xposed framework & gravity box, but auto rotate doesn't work so well, stays fixed on initial orientation.
Sent from my TegraNote-P1640 using Tapatalk
Click to expand...
Click to collapse
Tested you are correct. Away from computer so shall check it out tomorrow, nvidias made it difficult

Appreciate that and all the work you've put in. Have a good night.
Sent from my TegraNote-P1640 using Tapatalk

pr0ners said:
Appreciate that and all the work you've put in. Have a good night.
Sent from my TegraNote-P1640 using Tapatalk
Click to expand...
Click to collapse
OP Updated, fixed sensors that everything working now
also restored CPU touchboost as it uses low power core and it makes it smoother compared to without it.

Confirmed as working. Definitely running cooler as well now.
Sent from my TegraNote-P1640 using Tapatalk

Hello.Is this for 4.4 only or can be used with 4.3?.

subzero82 said:
Hello.Is this for 4.4 only or can be used with 4.3?.
Click to expand...
Click to collapse
For android 4.4 but it should work with 4.3 (untested)

Loving the latest Kernel mate, nice work.
I can quite agree with Nvidia making modding this tablet hardwork with their sources being like they are.
Whats even better with this Kernel is we can now have Custom bootanimations without it hitting the dam /lbh partition for it. So now i have a Android L Bootanimation lol

What's the best Kernel tweaker to use with this ?

neontigers said:
What's the best Kernel tweaker to use with this ?
Click to expand...
Click to collapse
Set CPU is good, haven't tested antutu master etc etc, setting one core will set all cores so all applications should be compatible

Shaky156 said:
Set CPU is good, haven't tested antutu master etc etc, setting one core will set all cores so all applications should be compatible
Click to expand...
Click to collapse
Well I've tried both trickster mod and antutu and whenever I set the cpu speed and governer, press apply, then exit the app when I open the app again it reverts to the original CPU speed and governer that the kernal came with. Any fix for this ?

neontigers said:
Well I've tried both trickster mod and antutu and whenever I set the cpu speed and governer, press apply, then exit the app when I open the app again it reverts to the original CPU speed and governer that the kernal came with. Any fix for this ?
Click to expand...
Click to collapse
I haven't not had that issue, if you can provide a log maybe I can look into it. Make sure you have root, I have left userspace control so everyone can still control it within the setting menu choosing Max power or power saving. Oh I have 2 incoming updates tonight

Shaky156 said:
I haven't not had that issue, if you can provide a log maybe I can look into it. Make sure you have root, I have left userspace control so everyone can still control it within the setting menu choosing Max power or power saving. Oh I have 2 incoming updates tonight
Click to expand...
Click to collapse
Here ya go,hopefully its helpful, this is me setting the frequency,closing the app and opening again

neontigers said:
Here ya go,hopefully its helpful, this is me setting the frequency,closing the app and opening again
Click to expand...
Click to collapse
its not 1kb, and you've provided wrong log. I'm all for helping but dont wasting my time

{GUIDE} ONEPLUS 3T Insane Battery Life and Perfomance Screen On Time (SOT) 7-8 Hou

I'm about to tell you how to get buttery smooth, lag-free performance with insanely good battery life.
EX KERNEL MANAGER:
FEATURES
Easy installation and setup with Aroma installer
Optimized for performance and battery life
Advanced color control
Sound control
Overclock or underclock CPU
Notification light control
Sweep2sleep
Backlight dimmer option
Wake Gestures (Sweep2Wake and DoubleTap2Wake)
NTFS r/w support
Option to disable fsync
Adjust or disable vibration
Dash charge
Does not force encryption
Compatible with systemless root
DOWNLOADS:
EX Kernel Manager
Quick and easy updates and full control
https://play.google.com/store/apps/...er-global-all-co-prtnr-py-PartBadge-Mar2515-1
Kernel for OxygenOS (Android 7.0)
https://www.androidfilehost.com/?fid=385035244224414818
PROJECT ZHANA:
https://mega.nz/#!nx10maSS!4SQb5zZvwGOmN_vaDtNigsc15COSyWmGPlRANhJmSsk
Explanation for each variant:
Project Zhana Balanced (Default): The Project Zhana that you know and love.
Project Zhana Battery: Same as above, but with lower Input boost values and some tweak on target_loads, above_hispeed_delay and GPU
Project X.A.N.A Battery (Default): This is default version of X.A.N.A
Project X.A.N.A Balanced: The same as above but with higher Input boost and some tweaks for I/O and GPU, for a better performance.
Project X.A.N.A Extrem Battery: If you are using this profile and you suffer lag don't even think on complaining since I won't listen. This is made for really light usage. No Input Boost, Battery saving I/O and GPU ...
Source:
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
Video:
https://youtu.be/gnHFPZyE2Xg

ashokmor007 said:
I'm about to tell you how to get buttery smooth, lag-free performance with insanely good battery life.
EX KERNEL MANAGER:
FEATURES
Easy installation and setup with Aroma installer
Optimized for performance and battery life
Advanced color control
Sound control
Overclock or underclock CPU
Notification light control
Sweep2sleep
Backlight dimmer option
Wake Gestures (Sweep2Wake and DoubleTap2Wake)
NTFS r/w support
Option to disable fsync
Adjust or disable vibration
Dash charge
Does not force encryption
Compatible with systemless root
DOWNLOADS:
EX Kernel Manager
Quick and easy updates and full control
https://play.google.com/store/apps/...er-global-all-co-prtnr-py-PartBadge-Mar2515-1
Kernel for OxygenOS (Android 7.0)
https://www.androidfilehost.com/?fid=385035244224414818
PROJECT ZHANA:
https://mega.nz/#!nx10maSS!4SQb5zZvwGOmN_vaDtNigsc15COSyWmGPlRANhJmSsk
Explanation for each variant:
Project Zhana Balanced (Default): The Project Zhana that you know and love.
Project Zhana Battery: Same as above, but with lower Input boost values and some tweak on target_loads, above_hispeed_delay and GPU
Project X.A.N.A Battery (Default): This is default version of X.A.N.A
Project X.A.N.A Balanced: The same as above but with higher Input boost and some tweaks for I/O and GPU, for a better performance.
Project X.A.N.A Extrem Battery: If you are using this profile and you suffer lag don't even think on complaining since I won't listen. This is made for really light usage. No Input Boost, Battery saving I/O and GPU ...
Source:
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
Video:
https://youtu.be/gnHFPZyE2Xg
Click to expand...
Click to collapse
If I'm not wrong, these profiles are for the 3 (820). Have you made any changes to the values to make it work perfectly with the T?

horizon_KJ said:
If I'm not wrong, these profiles are for the 3 (820). Have you made any changes to the values to make it work perfectly with the T?
Click to expand...
Click to collapse
M using only 3t profile so xda source is just given to understand.

ashokmor007 said:
M using only 3t profile so xda source is just given to understand.
Click to expand...
Click to collapse
??

ashokmor007 said:
M using only 3t profile so xda source is just given to understand.
Click to expand...
Click to collapse
Could you be more clear?
Those profiles are for the OP3.
The OP3T is not supported,yet!

Any screenshots with battery stats?

I'm trying it. Flashed the file 2 hours ago and no errors, bootloops, crashes, force closing app etc. for now. Will report battery stats tomorrow because I have to fully charge my phone first. Just to mention : AFK (that for now is only for op3) is coming soon for op3t too

MaxFTW said:
Any screenshots with battery stats?
Click to expand...
Click to collapse
Inbetween the video ull fine screen shot

Midomad said:
Could you be more clear?
Those profiles are for the OP3.
The OP3T is not supported,yet!
Click to expand...
Click to collapse
The method i used is for op3t

ashokmor007 said:
The method i used is for op3t
Click to expand...
Click to collapse
Method?
What about the actual files and the values for the 821?

omair2005 said:
Method?
What about the actual files and the values for the 821?
Click to expand...
Click to collapse
Zhana s file was actually for onplus3t which i have flashed.

ashokmor007 said:
Zhana s file was actually for onplus3t which i have flashed.
Click to expand...
Click to collapse
I didn't know that.. Source?

Have no idea after reading how and what to do

omair2005 said:
I didn't know that.. Source?
Click to expand...
Click to collapse
Check rhis thread ...
N i personally i have tested so if u want give it a try ..its your call by the way
https://forum.xda-developers.com/oneplus-3t/development/kernel-elementalx-op3-1-00-t3521298

rockmaster said:
Have no idea after reading how and what to do
Click to expand...
Click to collapse
Lol the phone used in video is op3t

Please someone revert back if they are getting insane battery life as shown in video. I'm unsure to flash it as of now.

90% of what has been said in this thread is indecipherable gibberish

If somebody is interested you can use this app to run the profiles ... Don't need to flash anything...

cultofluna said:
If somebody is interested you can use this app to run the profiles ... Don't need to flash anything...
Click to expand...
Click to collapse
What's dis.? And how to use this

Vaibhunk786 said:
What's dis.? And how to use this
Click to expand...
Click to collapse
Just install the app and choose the desired profile ....

Project Zhana kernel?

On the OnePlus 3 forum, apparently Project Zhana is a great kernel profile?
I went ahead and flashed it, and activated it. There are a few permissions denied lines, I assume because not every setting well be the same as the Axon 7.
Anybody else try this yet?

kaivorth said:
On the OnePlus 3 forum, apparently Project Zhana is a great kernel profile?
I went ahead and flashed it, and activated it. There are a few permissions denied lines, I assume because not every setting well be the same as the Axon 7.
Anybody else try this yet?
Click to expand...
Click to collapse
Yes, and most AKT profiles are downright crap on the axon7. They are made specifically for the voltage tables of the 3/3T.
Just use jojoc

Choose an username... said:
Yes, and most AKT profiles are downright crap on the axon7. They are made specifically for the voltage tables of the 3/3T.
Just use jojoc
Click to expand...
Click to collapse
Well I have used AKT profiles before and they was working really good. I could see a major difference when it came to battery life . But I think it also depends on wich kernel u running.

Choose an username... said:
Yes, and most AKT profiles are downright crap on the axon7. They are made specifically for the voltage tables of the 3/3T.
Just use jojoc
Click to expand...
Click to collapse
I'll def try that out soon. Using the Project Ghana one so far and it's great! I'll give it a couple days and try the jojoc

kaivorth said:
I'll def try that out soon. Using the Project Ghana one so far and it's great! I'll give it a couple days and try the jojoc
Click to expand...
Click to collapse
Wich rom and kernel are u running?

Choose an username... said:
Yes, and most AKT profiles are downright crap on the axon7. They are made specifically for the voltage tables of the 3/3T.
Just use jojoc
Click to expand...
Click to collapse
jw1985 said:
Wich rom and kernel are u running?
Click to expand...
Click to collapse
Stock everything, just the Project Zhana profile.
Now I'm not sure if it really did much. Going to try some more