did anyone come across any solutions for the PIN being max size of 4 Digits? Like having it at 6 digits?
Related
I just noticed the s pen tip and floating pointer on screen are always off by 2mm. This occurred on both my ATT and T-mobile note 3 so it is not an isolated case. Anyone else experienced this issue? What is your fix?
Sent from my SM-N900T using Tapatalk 4
Same problem here, no fix yet
onyxogen said:
Same problem here, no fix yet
Click to expand...
Click to collapse
Thank you for confirming this. I wonder why they don't have a digitizer calibration feature in setting like Windows?
From a technology point of view, due to the way the S Pen works, it should not require calibration
In laymen's terms, think of capacitive touchscreens, which do not require calibration, the first reason is because capacitive touch sensors always have auto calibration, the second reason is that your screen is divided into multiple rows and columns, so even if a measurement is wrong by 10%, that 10% over a small area is not really noticeable
With the old resistive touchscreen technology, calibration is required, because the screen is one gigantic resistor and 10% error in measurement means a error that is as big as 10% of your screen size. Also resistive touchscreens are constructed with two layers and these layers get bent, and wear out over time.
The S Pen technology is elecromagnetic, and it also sort of uses multiple rows and columns ("Under the tablet's surface (or LCD in the case of the Cintiq) is a printed circuit board with a grid of multiple send/receive coils and a magnetic reflector attached behind the grid array."), thus, it is similar to capacitive touchscreens in the sense that measurement errors are usually unnoticeable by the user.
Thus why nobody implemented calibration
If I were you, I'd exchange the phone for a new one if possible.
I have the feeling this is an issue with newer builds of touchwiz. On the note 8 once it was updated to 4.2.2 the pen was accuracy became offset. The only fix to it as of now is running a custom kernel that fixed the accuracy. Hopefully we get a similar fix soon from xda and of course an official fix from Samsung.
Sent from my GT-N5110 using Tapatalk 4
I think this is a design feature. If you change it to left handed operation the pointer will be 2mm off to the right instead of the left. I recall this being so you can see the dot instead of being obscured by your own hand and pen. This was the same on my Note 2.
This should only apply to the pointer though, not to an actual touch.
EDIT: THIS WAS SO ON MY NOTE 2, but upon checking it is not so on my NOTE 3. My pen dot lines up perfectly.
I know this is an old thread, but there are always new owners to an old device.
If you have an SGH-I467 (AT&T) version with 4.4.2, the right/left hand dominant switch is not available. The workaround would be turning your tablet upside down with the auto rotate enabled so that your app would be right side up again. What you achieve here is moving the pointer from under your nib, if you are right handed, to the other side where you can see it so that you know where to drop down your pen to start drawing.
>I know this is an old thread, but there are always new owners to an old device.
If you have an SGH-I467 (AT&T).
But this is not the forum for that model .
I've just received the update to give me knock code and I'm loving it but I do have an issue.
My knock code is set in the lower two quadrants of the screen... However, if I knock the code in the correct pattern in the top two quadrants then it also unlocks my phone.
Similar problem if I set a code that only uses the left hand quadrants... I can unlock my phone knocking my code in the right hand quadrants.
Anyone else experiencing this??
Hi guys,
I went through some reviews and my own experience too, and observed that the fingerprint scanner gets slower ans you increase the number of fingerprints towards 5.
More the fingers, more the time and more slower the scanner!!
So here is what i figured out -
Our OnePlus 2 scanner is not like touchID in the sense that it DOES NOT make us scan all parts of the finger. It does ask for the print multiple times, but it does not compel you to do it with all parts of the finger.
so here is what i did -
start scanning for 1 finger - do around 60-70% of scanning with your major finger ( eg thumb ) and then do the remaining 30 - 40% with another finger ( like index finger )
This way , I have 4 fingers configured in 2 prints. One for left thumb and index and one for left thumb and index. I did major part thumb and minor part index finger.
Also, make sure when you aree scanning any finger, you hold the device in various ways you generally do in daily usage and scan your fingers at all those angles. :good:
This hack has let me have around 96-98% accuracy and its really quick!!
Try it and cast your votes above!!
Cheers! :highfive:
will bear this in mind when i get mine today
So how much slower does it get per added profile? I've got my doubts about accuracy too..
Waterdroid said:
So how much slower does it get per added profile? I've got my doubts about accuracy too..
Click to expand...
Click to collapse
3 fingers was quite slow for me...
2 fingers is fast... Idk how, but there was a huge difference in 2 & 3... Didn't try more than that...
Accuracy, i have around 95-98% accuracy...
As ive said, if you make sure while scanning itself, that you hols your phone in all the possible positions that you normal hold your phone in and then do the scans, it increases the accuracy rate a lot... Since youve made sure to scan the "most probably used parts" of your finger...
hey i buy this used note 4 (used for 3 weeks max ) and today i see that one pin on the back is damged ,the phone is working fine but i want to know what yhis pins are for?.
derSA7 said:
hey i buy this used note 4 (used for 3 weeks max ) and today i see that one pin on the back is damged ,the phone is working fine but i want to know what yhis pins are for?.
Click to expand...
Click to collapse
Can you share a pic of it
Reporting Via N910G.
i will after i find a a camera to take a pic
Hi,
Yesterday I bought a Lumia 950xl freshly out of warranty for around 170 USD off local classifieds ad.
I didn't get time to check the calling since my Sim 1 is VoLTE only and other sim wasn't a nano sim.
And Camera I thought was proper.
But later on I saw that camera just couldn't focus at all and then when i tried calling, the other person couldn't hear me at all.
I managed to get my hands on Lumia Test tool. Which confirmed something wrong with Camera OIS and Primary Mic.
Here's the whole report...
DOWNLOAD PDF
Lumia Phone Test Application - report
Name: Lumia 950 XL Dual SIM
IMEI: 351832070532628
Type: RM-1116
Product code: 059X4T3
Software version: 01078.00053.16236.35013 (OS: 15063.15063) (Up to date)
Date: 16-07-2017 15:50:23
Warranty: Out of warranty (in this country)
VID: Not checked (Invalid credentials for NOL server)
Passed: 12/15
1 Memory card detection
test
Passed
2 Charger test Passed
3 Wireless charger test Not executed
4 Self test Failed Digital microphone selftest (117 - Digital microphone selftest)
Result: MinorError
Details: Min variance:
Data: 0 Chnls:
Data: 0 9451631 25203 119130 Min diff:
Data: 4441240 Pairs:
Data: 19424283 4441240
Camera optical image stabilizer test (139 - Camera optical image stabilizer
test)
Result: MinorError
Details: Error limit, extreme positions used, reached center, lower left,
upper right, upper left, lower right, status, max error X, max error Y, high
freq X[2], high freq Y[2], high freq 12bit X[2], high freq 12bit Y[2], serial
number[4], OIS current[20], gm_reached, gm_stdx, gm_stdy, gm_ptpx,
gm_ptpy
Data: 6 80 176 250 252 170 172 90 87 158 94 92 168 1 18 14 0 143 0 113 0
0 0 0 0 0 0 0 255 242 255 225 255 228 255 217 255 253 255 239 255 232
255 234 255 255 255 218 0 79 47 23 13
5 SIM card test Passed
6 Audio test Passed
7 Proximity sensor test Passed
8 Accelerometer test Passed Object synchronization method was called from an unsynchronized block
of code.
9 Touch test Passed
10 Buttons test Passed
11 Vibra test Passed
12 Ambient light sensor test Passed
Page 1/2
13 Microphone test Failed Primary microphone failed to record.
14 Camera flash test Passed
15 Display test Passed
Summary: Camera OIS minor error.
Primary microphone Failed to record audio.
Page 2/
Click to expand...
Click to collapse
I found following replacement items for sale..
1) Replacement back cam module
https://www.maxbhi.com/back-camera-...oGUDnDuwLVnvpbPFDMGf3_6CmRjpUeSxoCpvoQAvD_BwE
2) Replacement Mic Module
https://www.maxbhi.com/microphone-m...zPFXAYUiN5yFo81FKMzQbP23hQW_8_i-cAaAkEs8P8HAQ
I think I can personally replace the cam module and get the mic soldered from a repair shop.
But what I want to know is...
WILL IT FIX IT?
Or is there something else that might be wrong as well?
Any other tips or suggestions welcome. THANKS.