Related
No notification pops up, my phone just doesnt seem to recognize the cable. Any reason? I was told the xoom camera kit cable would work for otg usb.
hello? can somebody help?
nobody? okay...coool
You'll need external power to power it
Sent from my GT-I9100 using XDA Premium App
its a pendrive, which should work unplugged. It just doesnt seem to even recognize that its there. Do you think the cable is defective?
In the usb otg tutorial video in the accessories section it shows that plugging in the cable without anything attached to it should trigger a notification. If it doesn't, it's probably the cable
Sent from my GT-I9100 using Tapatalk
okay, I guess the motorola xoom cable does not work for some stupid reason. Or its defective...well ****.
I guess, it's missing a resistor to trigger OTG mode.
Sent from my GT-I9100 using XDA App
in this thread (http://forum.xda-developers.com/showthread.php?t=1092493&highlight=usb+otg+resistor) you'll find detailed instructions on what makes one cable work and another one fail. apparently, you'd have to open the micro usb plug and connect pin 4 and 5. the connection between pin 4 and 5 determine, what kind of connection it is: charging, sync, usb otg, mhl, trigger download mode... and indeed, that is done by putting in different resistor strengths.
I got one of these, only £2.50 shipped and works perfectly, its great fun plugging in a mouse!
I have an otg cable, yet none of my accessories work with it and my RAZR MAXX. My question is whether or not I need a powered hub when using the OTG cable. I have seen set ups of other android models using a SIXAXIS controller and otg cable, yet no hub. In this case, it the powered hub not needed since the controller itself is supplying its own power?
Thanks,
Neverused
USB controllers don't work?? I'm interested in this as well
Sent from my Xoom using xda app-developers app
Download USB Device Info:
https://play.google.com/store/apps/details?id=aws.apps.usbDeviceEnumerator
When you open the app you should see 0 devices under Android and Linux tabs. Now connect just your OTG cable nothing plugged into it and hit refresh, something should show up, usually under the Linux tab that identifies the USB host. Even if the USB host doesn't supply power this will still work as I have tested it on my Touchpad which has no OTG power.
If you saw something appear when you connected the OTG cable, than OTG is in the Razr M. Now try connecting your gamepad and refresh the device list. If its not showing up then there is either something wrong with OTG or you need external power. This program will ID any USB device connected, even those which Android doesn't support since its just matching the device against a list it has. Try getting a USB keyboard/mouse working ad those are universally supported on Android and would confirm if USB host works.
Questions go in the question forum too...
Here's a dumb question. I just ordered a female USB to male micro USB. I wanted to be able to yank pics off my camera and drop them on my phone. Would I need an OTG adapter or does that plane adapter work?
Sent from my XT907 using xda premium
agent888 said:
Here's a dumb question. I just ordered a female USB to male micro USB. I wanted to be able to yank pics off my camera and drop them on my phone. Would I need an OTG adapter or does that plane adapter work?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
An OTG cable has a extra pin in it that is tied to ground in a OTG cable which tells the hardware to switch to OTG mode. A regular USB cable will leave this pin open.
If I'm able to peel open this adapter that I got, and jump pin 4 to 5 should it work as an OTG cable?
Sent from my XT907 using xda premium
agent888 said:
If I'm able to peel open this adapter that I got, and jump pin 4 to 5 should it work as an OTG cable?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Its possible, as shown here:
http://tech2.in.com/how-to/accessor...sb-otg-cable-for-an-android-smartphone/319982
For me I'd rather just buy an OTG cable, but if you have regular microUSB cables laying around, go for it.
Bought an OTG cable
Bought a simple OTG adapter from newegg. So far....plugged in a mouse and my camera. Both work flawlessly, my camera gives me the choice of either either MTP (?) that goes straight to gallery and image import, or Storage which prompts to a new usb mount. Have not tried a gamepad yet, I have 2 floating around somewhere but not sure what game to try.
I installed it in my dash and removing it is a pita it was working perfectly fine but for some reason it wasnt showings charge or turning off or on with the car it just stays on i tried restart nothing happens i tried unplugging usb from powergen and plugging back in no result
Also if i go to usb rom under fixed installation i am able to check box and uncheck also did nothing
I am using nexus 7, timurs usb rom, otg cable, original charging cable and powergen usb charger
Please help thanks
Anyone???
I'm also using Timur's kernel with USB ROM for my car installation. I know that it can be very picky on the order the USB plugs are added (data and power). It may seem simple but remove the the OTG cable from the tablet and remove both the data and power legs from the OTG as well. The follow the order listed by Timur on his website:
To activate charging, you must first connect your external power supply to your OTG Y-adapter - then plug the OTG adapter into your Nexus 7 - and then connect any slave devices.
Click to expand...
Click to collapse
Hopefully that should get you back up and working. I completely understand how frustrating it is to have everything plugged in and see that tablet isn't charging, especially when its difficult to get to the Nexus itself.
does anyone have a easy charging solution these car chargers dont work
and a good otg y cable
You could try using a power inverter which will give you a standard US plug from the cigarette lighter. From here, you could plug in a regular outlet adapter. I found this to work pretty well with my own set up and managed to get one pretty cheap at Walmart. As for a good OTG y cable, your best bet is probably to go on Amazon and find one with a lot of good reviews. They can vary in quality and some of the cheap ones I've gotten from China have flaked out after a short time and little use.
Sent from my Nexus 7 using xda app-developers app
Not seeing usb power
I had the same issue. I was using a 90 degree adapter into an OTG cable and my n7 wouldn't go into fixed install mode. Turns out my adapter cable was stopping the n7 from recognizing power. I removed the 90 degree adapter and plugged straight to otg and it worked as advertised. The issue was found during my bench testing on a 12v powersupply. I still have to find a 90 degree otg cable that will work.
So... try a different cable or if you have an adapter between the otg y cable, that may be the issue.
I have my NP coming next week! Now I need to know what I should order to go with it. Should I get a USB hub for it? Can I use the Logitech k400 if I wanted? Can I plug a 1TB HDD in somehow to play my movies? My computer recently died so my plex server is down :/
I'd like to change ROMs on the device too.. So please advise. Thank you!
Sent from my Nexus 7 using XDA Free mobile app
Get an adapter cable from micro USB to USB female. Then get a powered USB hub - the passive ones probably won't be able to drive your HDD.
With Kodi, you won't need the PC-based server!
Lots of choices for a Bluetooth keyboard/mouse. I use my Logitech diNovo Mini.
I would recommend the Inateck HB4003 Gigabit Ethernet & 3 Port USB 3.0 Hub. It has the micro usb adapter built into it as well as an ethernet port & a hub. If you want to use your TV remote instead of the nexus player, I would recommend getting a FLIRC usb adapter as well.
Thanks for the ideas! I'm really pumped lol.. Kodi sounds like a perfect fit for me. Are there any restrictions on hard drive size that can be connected?
Sent from my SCH-I535 using XDA Free mobile app
xaudiblex said:
I would recommend the Inateck HB4003 Gigabit Ethernet & 3 Port USB 3.0 Hub. It has the micro usb adapter built into it as well as an ethernet port & a hub. If you want to use your TV remote instead of the nexus player, I would recommend getting a FLIRC usb adapter as well.
Click to expand...
Click to collapse
One thing I noticed with the HB4003 it looks like a regular USB end not a micro and the cable doesn't detach. Where you saying get that and the micro USB to USB female adapter? Thanks!
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
One thing I noticed with the HB4003 it looks like a regular USB end not a micro and the cable doesn't detach. Where you saying get that and the micro USB to USB female adapter? Thanks!
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
My mistake, you are right. Its has been so long ago since I put together my setup. I forgot that I also have a HooToo (HT-CT01) Micro USB OTG + 4 port charging hub as part of my setup (used to charge my cell phone, tablet, & game controllers). You will need a micro usb OTG cable if you go with the HB4003.
Regardless of which OTG cable you go with, make sure that it is a straight cable for OTG. If the otg device is a right/left angle cable or a short adapter, it won't work because of how scrunched the cables are.
xaudiblex said:
My mistake, you are right. Its has been so long ago since I put together my setup. I forgot that I also have a HooToo (HT-CT01) Micro USB OTG + 4 port charging hub as part of my setup (used to charge my cell phone, tablet, & game controllers). You will need a micro usb OTG cable if you go with the HB4003.
Regardless of which OTG cable you go with, make sure that it is a straight cable for OTG. If the otg device is a right/left angle cable or a short adapter, it won't work because of how scrunched the cables are.
Click to expand...
Click to collapse
Thank you for replying! I'll order an OTG cable and the adapter you suggested. It not being powered isn't going to be an issue you think?
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
Thank you for replying! I'll order an OTG cable and the adapter you suggested. It not being powered isn't going to be an issue you think?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
I've been thinking about this, and in this case it's better to get a powered usb hub, and plug a usb-ethernet adapter into that hub.
talk2nate said:
It not being powered isn't going to be an issue you think?
Click to expand...
Click to collapse
For me, it hasn't been an issue that the HB4003 is not powered. Then again, all I have connected is a FLIRC adapter, mini usb receiver for my Lenovo N9502 keyboard/mouse, & a thumb drive.
kenkiller said:
I've been thinking about this, and in this case it's better to get a powered usb hub, and plug a usb-ethernet adapter into that hub.
Click to expand...
Click to collapse
I chose the adapter to reduce clutter & reduce my millions of wire behind my TV. The way I see it, having one less USB connected device is one less thing to diagnose (I am always flashing roms & plugging & unplugging devices to the USB hub.
Hmm is this a viable option?
https://www.amazon.com/dp/B00KRY4YJW/ref=cm_sw_r_awd_Bzuyvb0FJ38VS
Sent from my Nexus 7 using XDA Free mobile app
xaudiblex said:
For me, it hasn't been an issue that the HB4003 is not powered. Then again, all I have connected is a FLIRC adapter, mini usb receiver for my Lenovo N9502 keyboard/mouse, & a thumb drive.
I chose the adapter to reduce clutter & reduce my millions of wire behind my TV. The way I see it, having one less USB connected device is one less thing to diagnose (I am always flashing roms & plugging & unplugging devices to the USB hub.
Click to expand...
Click to collapse
Yeah, but now having a ssd to increase userdata space is a valid method, it changes a limitation of the NP. For me personally I'll just hide away the clutter.
---------- Post added at 12:20 PM ---------- Previous post was at 12:19 PM ----------
talk2nate said:
Hmm is this a viable option?
https://www.amazon.com/dp/B00KRY4YJW/ref=cm_sw_r_awd_Bzuyvb0FJ38VS
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Sadly, no one can tell you for sure unless they've tried it.
talk2nate said:
Hmm is this a viable option?
Click to expand...
Click to collapse
This is what I have. Click here for my review on XDA. However, there is only 1 USB port that is connected to the OTG. The remaining 4 ports are for charging purposes only. If you need more than 1 USB port fort OTG purposes & possibly an ethernet port, I would get the HooToo and the Inateck.
The way mine is wired is:
Nexus player ---> Micro USB Cable (provided) ---> USB extension cable (OTG cable is short and wanted to hide the hub) ---> HooToo Hub (back HooToo USB OTG port) ---> Inateck Hub (Front of HooToo Hub)
xaudiblex said:
This is what I have. Click here for my review on XDA. However, there is only 1 USB port that is connected to the OTG. The remaining 4 ports are for charging purposes only. If you need more than 1 USB port fort OTG purposes & possibly an ethernet port, I would get the HooToo and the Inateck.
The way mine is wired is:
Nexus player ---> Micro USB Cable (provided) ---> USB extension cable (OTG cable is short and wanted to hide the hub) ---> HooToo Hub (back HooToo USB OTG port) ---> Inateck Hub (Front of HooToo Hub)
Click to expand...
Click to collapse
Hehe...that's your setup? How is that reducing clutter?
If anything, removing the HooToo hub is reducing clutter, unless you need more than the OTG ports on the Inateck hub.
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.. Thats all I'd hook up to it.
Sent from my SCH-I535 using XDA Free mobile app
talk2nate said:
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.. Thats all I'd hook up to it.
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Most probably not as the 1TB hdd will require a powered usb hub.
Unless it's one of those that has it's own power source.
kenkiller said:
Hehe...that's your setup? How is that reducing clutter?
Click to expand...
Click to collapse
There is a method to my madness! It makes more sense when you see my setup.
My setup:
1x Harmony Smart Hub (USB Powered)
1x Winegard LNA-200 Boost XT Digital HDTV Preamplifier (USB Powered)
2x Micro USB Cables (Charging Tablet & Phone)
The Hootoo hub allows me to charge/power all 4 devices using 1 power brick instead of 4 individual power bricks. Having a functioning OTG was icing on the cake.
talk2nate said:
So micro to USB female > inateck hub with Ethernet is probably the best choice then.. I just wish I know it'd push a 1TB HDD and a Logitech K400.
Click to expand...
Click to collapse
Yes, that sounds right (make sure it says OTG). Is your 1TB HDD self-powered or is it powered through the USB port? If it is self-powered, it should work. I just plugged up my spare 1TB Fantom Self-Powered (power brick) HDD to see if it works and it seems to be okay. If it is not self-powered, it may be ymmv.
I have two HDDs actually. Both 1TB but one was in my desktop and I'd just order a powered enclosure for and the other is a western digital mobile drive without power.
So I'm pretty sure I'll go micro otg > inateck> powered HDD and Logitech K400.. That's really all I can see I'd use really. My TV is on the other side of the room. So not like I'll be walking over there much.
I'm stoked!
Sent from my Nexus 7 using XDA Free mobile app
talk2nate said:
I have two HDDs actually. Both 1TB but one was in my desktop and I'd just order a powered enclosure for and the other is a western digital mobile drive without power.
So I'm pretty sure I'll go micro otg > inateck> powered HDD and Logitech K400.. That's really all I can see I'd use really. My TV is on the other side of the room. So not like I'll be walking over there much.
I'm stoked!
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Why not plug the hdd into your router? It'll be accessible everywhere, easier to add/delete files on it.
My router is an older N 300 Cisco.. Sadly I've got no USB support for something like that atm. I'm looking into a router upgrade though. But the one I have has worked well for about 2 years now.
talk2nate said:
My router is an older N 300 Cisco.. Sadly I've got no USB support for something like that atm. I'm looking into a router upgrade though. But the one I have has worked well for about 2 years now.
Click to expand...
Click to collapse
Certainly something to consider.
But seriously, if all you're going to put on that hdd is media, plugging it into your PC and sharing it works the same as plugging it into a router (only bad point is that your PC needs to be switched on for the hdd to be accessible). If you're going to be plugging/unplugging your hdd from your Nexus Player just to add files, it gets old pretty fast.
My LG V20 has USB-C and so does my LG monitor. I plugged my phone into my monitor and it displayed the screen and charged the phone. Then I plugged a USB mouse and keyboard into the other USB ports on the monitor and they both connected to the V20. So when I'm home I can use my V20 just like a computer with one USB-C cable.
Is there any way I can route the audio out the USB-C port instead of the headphone jack? So the sound would go to my monitor. My speakers are hooked up to the audio jack on my monitor.
Sent from my LG-H910 using Tapatalk
Cool. What model monitor is it?
Sent from my VS995 using Tapatalk
SaintCrispin said:
My LG V20 has USB-C and so does my LG monitor. I plugged my phone into my monitor and it displayed the screen and charged the phone. Then I plugged a USB mouse and keyboard into the other USB ports on the monitor and they both connected to the V20. So when I'm home I can use my V20 just like a computer with one USB-C cable.
Is there any way I can route the audio out the USB-C port instead of the headphone jack? So the sound would go to my monitor. My speakers are hooked up to the audio jack on my monitor.
Sent from my LG-H910 using Tapatalk
Click to expand...
Click to collapse
in developer option there is an option to route all audio through usb...about half way down the developer menu
i use this when i connect my gaming headset with an otg adapter, hyper x clouds with full 7.1 emulation, it is amazing.
hopefully there are no issues using that setting with video out, usb type c (usb 3.1) should have the bandwidth
emtownsend said:
Cool. What model monitor is it?
Sent from my VS995 using Tapatalk
Click to expand...
Click to collapse
It's an LG 27UD88
Sent from my LG-H910 using Tapatalk
Rezin M. Khanz said:
in developer option there is an option to route all audio through usb...about half way down the developer menu
i use this when i connect my gaming headset with an otg adapter, hyper x clouds with full 7.1 emulation, it is amazing.
hopefully there are no issues using that setting with video out, usb type c (usb 3.1) should have the bandwidth
Click to expand...
Click to collapse
My bad for the late reply. My app didn't show that anyone responded. I went into the developer settings and changed Select USB Configuration to Audio Source. It didn't work. All the audio still routes through either the headphone jack or the internal speaker. There could be an issue with the simultaneous output of video and sound. I messed with my monitor and didn't see any USB-C audio settings.
Sent from my LG-H910 using Tapatalk
I can connect it to Sony HG1 speakers through USB.
mingkee said:
I can connect it to Sony HG1 speakers through USB.
Click to expand...
Click to collapse
I wonder if my USB-C cable only carries data and video but not sound.
Sent from my LG-H910 using Tapatalk
SaintCrispin said:
I wonder if my USB-C cable only carries data and video but not sound.
Sent from my LG-H910 using Tapatalk
Click to expand...
Click to collapse
V20 supports USB audio.