Related
I notices a few users have mentioned that they're dealing with trying to restore or unbrick their Continuum after flashing incompatible kernels and other problems.
I made this backup immediately after I got root, before I did anything else, to make absolutely sure I wouldn't be SOL if anything went awry. I've made absolutely certain this works, by unzipping and flashing on my own Continuum prior to uploading. It contains the system, recovery, and kernel partitions.
This file is also helpful if you need to get back to stock for warranty purposes, in which case you can manually un-root by using your favorite file explorer (I happen to prefer ES File Explorer), grant root permissions, mount system as rw, then manually delete SuperUser from /system/apps, su from /system/bin, and busybox from /systen/xbin. I hope this helps some of you who have been stuck.
You don't need to be rooted to flash this. Simply unzip, flash the .tar.md5, and you're golden. If you end up in restore mode after flashing, you probably need to do a hard reset, but this is unlikely as I tested it by flashing this a few times after installing various programs from the Market and never had to do a hard reset.
Don't forget to put your phone in Download mode by removing the battery, then holding the vol down button while inserting the usb cable. Good luck!
http://www.mediafire.com/?a897dbakz4j7k4f
Thanks for this. I had been messing around with the phone. I was able to get it back to stock.
Kay I try to flash this and it's telling me it's an invalid image type
Never mind, I got it. Thanks
Not a problem, glad I could help!
My phone was soft-bricked. This worked like a charm. Thank you so much!
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
kingtuk1 said:
I ran this and everything passed then when i boot up the phone with animations and sound after the animated verizonwireless logo is up for a while; everything goes black.
any suggestions? never mind I had to do a wipe then it worked
Click to expand...
Click to collapse
Yup, gotta wipe! At first it's so easy to forget this step. When you get to customizing your installation, you'll get to used to having to wipe it'll become second nature!
I'm so glad to hear this is coming in handy for you all! Now that you got this done, get yourself froyo, courtesy of imnuts: http://forum.xda-developers.com/showthread.php?t=1197415
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Native89 said:
Ok after having installed EC03 Froyo via imnuts's thread. Everything was going fine except for some bugs here and there. Fast forward a couple weeks later and I try to fix those bugs by installing a stock odin rom via torque's thread (seems so foolish now that I look back on it). Which brings me to today and my bricked Continuum.
Well to explain further I tried to install the odin Rom only to receive a FAIL in the end (Selected the md5 file through the PDA option and proceeded to flash). Disconnected afterwards only to find out I can't even get the Samsung logo to show up or the phone to charge, but the phone will still go into download mode.
And this leads me to this thread with the same outcome. I've tried flashing this eclair? image only to end up with the fail message again. After the recovery.bin stage it just says "Complete(write) operation failed." Any help with this matter would be appreciated.
Edit: After some searching, gonna try it with imnuts' DL17 image. Will post results.
Edit2: No luck with that either. Guess I'll just wait until the Bionic gets released, but for now I'll have to dig up my dumbphone.
Click to expand...
Click to collapse
Read the OP from pastorbennett here: http://forum.xda-developers.com/showthread.php?t=1203597 and try the unbrick process. You can do a search for pastorbennett and trailblazer. Both have posted "recovery processes", or at least links to others that have posted recovery processes. They've saved my butt a couple of times... Except on my first phone that wouldn't go into DL or Recovery Mode. It would just flash the Samsung logo, over, and over, and over again... That happened before pastorbennett posted the unbrick info. Oh well, Verizon replaced it under the hardware warranty. Thankfully.
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Native89 said:
Looks like I didn't search hard enough.
Thanks for the link Moon. I will be trying this ASAP.
Hit a little bit of a snag trying to get it to work. It told me to install drivers for my device, however my Phone does not show up in the dropbox and the only related thing I can find is "Gadget Serial".
I've tried uninstalling the drivers, but Win7 is being a fool and automatically installing drivers for me.
Click to expand...
Click to collapse
Okay, if you can, grab a different computer (either Windows XP or Windows 7) and install the samsung drivers from this post: http://forum.xda-developers.com/show....php?t=1203597. The hint here with ANY Windows computer is to install the device drivers FIRST! (I've been a system administrator for about 20 years.) Then plug in the hardware. It usually makes the installations go MUCH smoother.
If you have to use your computer, try installing the Samsung drivers first, then plug the phone in.
zzir said:
Does anyone know why i get a 'FAILED' after trying to flash this with Odin? My phone is soft-bricked btw.
Click to expand...
Click to collapse
The key to odin seems to be this:
1. Start odin.
2. Click the PDA button and select the odin TAR or MD5 file. (You can only do one. Not both.)
3. Make sure the phone is not plugged into the computer.
4. Make doubly sure the phone is not plugged into the computer.
5. Put your phone into download mode. (With the phone off, hold the Volume Down button and turn the phone on.)
6. Then plug the phone into the computer.
7. Start the odin flash and you should be good to go. Also, before unplugging the phone, make sure it says either success or failed. If it doesn't say anything, or says loading (or something like that), WALK AWAY! Go get yourself a cup of coffee, a soda, a nice cup of tea... Something. I recommend waiting at least 10 minutes. If the progress bar has not moved, in that time, okay, then pull the cable and the battery and start again.
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Tarheel487 said:
I tried to do this, but when it boots into recovery mode, it says update.zip is gone. Any ideas why this might be happening? Also if it's like this, will Verizon take it back within the 14 day return policy without charging me anything?
Click to expand...
Click to collapse
Did you flash the CWM Recovery in Odin? (cwm_recovery_test4_adryn.tar) Can be found here if not http://forum.xda-developers.com/showthread.php?t=1230072
is it possible to flash this with heimdall or only odin?
ntien said:
is it possible to flash this with heimdall or only odin?
Click to expand...
Click to collapse
I don't know, however, pastorbennett posted this http://forum.xda-developers.com/showpost.php?p=16600453&postcount=29. It might help? I use Linux at home to build most of this stuff, then use my wife's Windoze machine to flash. It just seemed easier.
Yes, you can use heimdall, you just need to extract this .tar and put the extracted files in the corresponding location in heimdall xD
Sent from my SCH-I400 using xda premium
yeah i saw that but in heimdall 1.3 the UI is different. i don't know where to put any of the stuff. i have the .tar but i dont know where to put the other stuff. here's a screenshot
So here's the deal; I had my phone rooted with ForceROM before the recent OTA update. When the update came out, I couldn't install it because of the root. The constant notification to update was annoying me so I unrooted and installed the update (which may have been my downfall). Today, I tried to re-root using CWM (this method) and install TriForceROM, but my phone will not boot into recovery mode to finish the job. It goes to the Samsung screen with the "Recovery Booting..." in the top left corner, goes blank, and reboots as normal. I tried going completely bare-bones stock (unrooted then did a factory reset) and doing it from there but same results.
Is this something to do with the new update? Did I miss a step? Any help is appreciated. I'm just glad the phone isn't totally bricked.
Caffeinatrix said:
So here's the deal; I had my phone rooted with ForceROM before the recent OTA update. When the update came out, I couldn't install it because of the root. The constant notification to update was annoying me so I unrooted and installed the update (which may have been my downfall). Today, I tried to re-root using CWM (this method) and install TriForceROM, but my phone will not boot into recovery mode to finish the job. It goes to the Samsung screen with the "Recovery Booting..." in the top left corner, goes blank, and reboots as normal. I tried going completely bare-bones stock (unrooted then did a factory reset) and doing it from there but same results.
Is this something to do with the new update? Did I miss a step? Any help is appreciated. I'm just glad the phone isn't totally bricked.
Click to expand...
Click to collapse
So you are on MF9 then?
If so, go to the 'how to root video' thread, follow the instructions there on how to use CF Autoroot. Then Download goomanger and use it to install custom recovery.
Then you will have a recovery that you can use to flash what ever it is you are looking for.
However I really suggest you spend some time here, at xda, reading throug the stickies and how tos. Then go through the ROM threads and read some more before you turn you nice pretty phone into a paperweight.
Good luck.
leaderbuilder said:
So you are on MF9 then?
If so, go to the 'how to root video' thread, follow the instructions there on how to use CF Autoroot. Then Download goomanger and use it to install custom recovery.
Then you will have a recovery that you can use to flash what ever it is you are looking for.
However I really suggest you spend some time here, at xda, reading throug the stickies and how tos. Then go through the ROM threads and read some more before you turn you nice pretty phone into a paperweight.
Good luck.
Click to expand...
Click to collapse
Yes, I'm on MF9 xP I'll try that! Thanks
And I've done rooting and flashing ROM stuff since I've had a smartphone, I just couldn't figure this one out with the update and it being tricky enough to get root on this phone to begin with x_x
Here's some more info
leaderbuilder said:
Here's some more info
Click to expand...
Click to collapse
Yup, everything works perfectly now Thanks again ^_^
How to you mark a thread as solved? Or does a mod do that?
Caffeinatrix said:
Yup, everything works perfectly now Thanks again ^_^
How to you mark a thread as solved? Or does a mod do that?
Click to expand...
Click to collapse
Just go to first/original post and eidt/modify title should do it.
Greetings everyone,
So will not try to type out a book here, but want to try to include all the info/everything I have done do this point. I recently purchased a Galaxy S4 ( SGH-I337) ATT model. My end goal was to have it rooted with CM 11 installed on it. This is only the second phone I have attempted to root ( First was Atrix HD which went overall fine). I'm basing my end goal off of it, in that I am wanting to have it rooted with CM 11 installed. I started off by downloading Odin and used towel and was able to get the phone rooted. That seemed to have gone without too many problems. I tried to do as much reading as I could, but I'm sure I either misread or overlooked where I went wrong next. I then installed TWRP in the hopes of getting CM 11 installed. This is where the problems start. After installing TWRP ( later reading I saw I probably should have used Philz soft touch??) and restarting my phone it would only go into " Download Mode" and would forever just sit there. I did some searching and saw how to get past this simply by just restarting and holding the volume up and selecting now that I did not want to enter into Download mode. At this point I decided to go download the stock ROM and start over. I downloaded and followed the instructions from
Greetings everyone,
So will not try to type out a book here, but want to try to include all the info/everything I have done do this point. I recently purchased a Galaxy S4 ( SGH-I337) ATT model. My end goal was to have it rooted with CM 11 installed on it. This is only the second phone I have attempted to root ( First was Atrix HD which went overall fine). I'm basing my end goal off of it, in that I am wanting to have it rooted with CM 11 installed. I started off by downloading Odin and used towel and was able to get the phone rooted. That seemed to have gone without too many problems. I tried to do as much reading as I could, but I'm sure I either misread or overlooked where I went wrong next. I then installed TWRP in the hopes of getting CM 11 installed. This is where the problems start. After installing TWRP ( later reading I saw I probably should have used Philz soft touch??) and restarting my phone it would only go into " Download Mode" and would forever just sit there. I did some searching and saw how to get past this simply by just restarting and holding the volume up and selecting now that I did not want to enter into Download mode. At this point I decided to go download the stock ROM and start over. I downloaded and followed the instructions from
androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html . From that point is where things went to hell in a hand-basket. My phone will load but whenever I try to turn on Wifi to try to re-root I get a Security Information message saying that it has blocked Wifi from turning on. Quick Google search says this is built in security "Knox"? that is causing this. Posts say that I have the wrong firmware for this phone? The bigger problem seems to be that now when I try to boot into recovery, I get a background that says "No Command" and red lettering at the top that says " Android system recovery <3e>. I have options to reboot system now, update from ADB and others. At the bottom it says #Manual Mode# Successfully applied multi-CSC. So somehow I think i have corrupted the boot loader. Of course Odin will not recognize the phone in this state to try to push any kind of firmware or boot-loader to it. At this point I truley am clueless and lost. Not at all above saying I'm above my head and need some guidence or help from someone who knows a lot more about this then I do. I really thought I had read and done plenty of research before I tried this, but non the less I have a phone I can't get into recovery and once booted, I can't get wifi to work. Thanks for your time and insight. From that point is where things went to hell in a hand-basket. My phone will load but whenever I try to turn on Wifi to try to re-root I get a Security Information message saying that it has blocked Wifi from turning on. Quick Google search says this is built in security "Knox"? that is causing this. Posts say that I have the wrong firmware for this phone? The bigger problem seems to be that now when I try to boot into recovery, I get a background that says "No Command" and red lettering at the top that says " Android system recovery <3e>. I have options to reboot system now, update from ADB and others. At the bottom it says #Manual Mode# Successfully applied multi-CSC. So somehow I think i have corrupted the boot loader. Of course Odin will not recognize the phone in this state to try to push any kind of firmware or boot-loader to it. At this point I truley am clueless and lost. Not at all above saying I'm above my head and need some guidence or help from someone who knows a lot more about this then I do. I really thought I had read and done plenty of research before I tried this, but non the less I have a phone I can't get into recovery and once booted, I can't get wifi to work. Thanks for your time and insight.
Tl,dr sure looks like a book to me. If you just got an s4 I'm sure the bootloader can't be exploited and you can't use cm. Look through this http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Tl,dr sure looks like a book to me. If you just got an s4 I'm sure the bootloader can't be exploited and you can't use cm. Look through this http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the link. Very helpful info. Problem I can't seem to get around is that since any ROM i download will not pass the signature inside the recovery mode, I don't know how to get to where I can flash any kind of ROM to it. Yes sorry for the book, I just see too often people don't ever post enough info on what they have or what they have done. In essence how do i use Odin if i can't get into download mode and recovery mode will not accept any file cause it says it fails the md5 signature? Thanks for the help
bryantjb said:
Thanks for the link. Very helpful info. Problem I can't seem to get around is that since any ROM i download will not pass the signature inside the recovery mode, I don't know how to get to where I can flash any kind of ROM to it. Yes sorry for the book, I just see too often people don't ever post enough info on what they have or what they have done. In essence how do i use Odin if i can't get into download mode and recovery mode will not accept any file cause it says it fails the md5 signature? Thanks for the help
Click to expand...
Click to collapse
I don't want to give you useless information, but make sure you're using the right steps to get into download mode.
1) Power off your device
2) Remove battery for 10 seconds
3) Replace battery
4) Hold POWER + HOME + VOLUME DOWN until you see the "Warning" Screen
5) Quickly hit the VOLUME UP button.
Then you can connect to ODIN, and go from there.
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie
Hello,
I followed the guide for the Working Root Method For 5.0 Lollipop ROms and I was on BOK3 and everything actually worked and the phone was rooted, good to go. I was able to start the phone, installed busybox and safestrap, everything mentioned on the page, phone was good and working. However, I made a mistake. When I went to wipe the data so I could install a ROM I somehow managed to format, or wipe something I was not supposed to. Now, everytime I turn the power on it sticks on the Samsung Galaxy S5 page with the "Custom" wording and the open lock. I have been able to get to the download mode and when I tried to Odin to G900VVRU2BOK3_G900VVZW2BOK3_G900VVRU2BOK3_HOME.tar it says it passes, but still freezes on the "Custom" power on page. I honestly don't know what else I can do to try to get the device to power on/restore it, I've tried the N2 Kernal from the same page as the the tar and it doesn't get me anywhere, though it also says it passes. I'll be up for work in a few hours and if you have anything for me to try or requests for additional information I'll see what I can.
I have attempted to run the root bat file, just to see if it works, but that will not even list the phone.
Thank you,
Dale.
If you flash NK2 kernel and try to boot into lollipop, you're definitely going to freeze on boot because lollipop can't boot with a kitkat kernel.
Flash BOK3 stock image in Odin again. That image has the kernel in it also, so you don't need to flash anything else. Then boot into stock recovery (hold vol+UP and power), clear cache, then reboot.
If that doesn't work, boot back into stock recovery, clear cache and factory reset, then reboot.
That may work.
Thanks for the help. I don't know what I was thinking last night/this morning. All set now! For some reason now it didn't root when I went back through the procedures, but that is a problem to solve at a different time. I appreciate your calm response to my panic.
dhessjr2291 said:
Thanks for the help. I don't know what I was thinking last night/this morning. All set now! For some reason now it didn't root when I went back through the procedures, but that is a problem to solve at a different time. I appreciate your calm response to my panic.
Click to expand...
Click to collapse
You're welcome