Related
Hi, folks i tryed updating my rom yesterday with twrp recovery 2.8 and when i wiped cache etc... i wiped my system and now it say's i don't have a OS and when i try and flash with odin downgrading it says " EXT4 " error near the ned in odin. Any help would be appreciated. Thanks alot
asuncion66_66 said:
Hi, folks i tryed updating my rom yesterday with twrp recovery 2.8 and when i wiped cache etc... i wiped my system and now it say's i don't have a OS and when i try and flash with odin downgrading it says " EXT4 " error near the ned in odin. Any help would be appreciated. Thanks alot
Click to expand...
Click to collapse
((( When i start the phone normally i get ( Firmware upgrade encountered an issue ) i don't know what to do :/
Either flash a custom ROM from TWRP, or flash a stock ROM with ODIN & flash the PIT file with it
*Detection* said:
Either flash a custom ROM from TWRP, or flash a stock ROM with ODIN & flash the PIT file with it
Click to expand...
Click to collapse
Thanks for your reply! i have tryed flashing 2 or 3 roms with odin and all i get is ( EXT4 FAIL ) and on me phone screen not enough room or something! i can't get into twrp now all i get this the ( firmware upgrade encountered a issue :/ not sure what to do...
Did you flash the PIT file with the stock ROM in ODIN?
*Detection* said:
Did you flash the PIT file with the stock ROM in ODIN?
Click to expand...
Click to collapse
Yes i tryed do i need a certain pit file ? i'm based in the UK on network 02 please can you post me a link to a pit file and original stock rom for this phone thanks again.
The twrp say this because you clean system folder. To fix it, you need just download The official samsung rom.zip, put it in your sd card, and install normally with twrp.
PIT
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Get the stock ROM from sammobile . com
Go to the firmware section and search for G900F
Get the BTU version
---------- Post added at 14:01 ---------- Previous post was at 14:00 ----------
necromisty said:
The twrp say this because you clean system folder. To fix it, you need just download The official samsung rom.zip, put it in your sd card, and install normally with twrp.
Click to expand...
Click to collapse
No you don't, you can't flash stock ROMs with TWRP, you have to use ODIN
*Detection* said:
PIT
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Get the stock ROM from sammobile . com
Go to the firmware section and search for G900F
Get the BTU version
---------- Post added at 14:01 ---------- Previous post was at 14:00 ----------
No you don't, you can't flash stock ROMs with TWRP, you have to use ODIN
Click to expand...
Click to collapse
Thanks alot to the above users for helping e i will try this out and report back. You are so very kind.
Flash the PIT file and the stock ROM at the same time from ODIN
***SOLVED***
Thanks alot folks for your help i am now back on 4.4.2 kitkat but i lost everything. I can't thank you enough peeps on here.
Good stuff
Good idea to make a backup in TWRP before flashing anything custom next time, then you can always restore if you break it again
*Detection* said:
Good stuff
Good idea to make a backup in TWRP before flashing anything custom next time, then you can always restore if you break it again
Click to expand...
Click to collapse
Yeah i sure will this time around. Thanks for taking the time to help me.
No probs
hi i have the same problem but which stock rom do i use for my phone
Also in Odin do I put the pit file in the pit tab it warned me to not to
Hello, i have a samsung galaxy A5 that turns on goes to logo then restarts and goes to logo again continuously, also i cant get into recovery mode to format the phone. But i can go to download mode, can someone tell me how to fix this phone?
Thanks...
Can someone give me a recovery file for Galaxy a5 (model A500H) that I can flash with Odin to go into recovery mode?
Thanksgiving
Download and flash stock firmware from sammobile.com
I flashed with stock firmware version 5.1..1 from sammobile still same problem, I want to hard reset but can't go into recovery mode, any ideas?
Can anyone tell me how to enable the device to boot into recovery mode so I can factory set the phone?
andrew21 said:
I flashed with stock firmware version 5.1..1 from sammobile still same problem, I want to hard reset but can't go into recovery mode, any ideas?
Click to expand...
Click to collapse
The most recent version for the A500H is 5.0.2. Are you sute you flashed the correct firmware?
You can try to flash TWRP (the odin version) via odin.
---------- Post added at 09:09 AM ---------- Previous post was at 09:08 AM ----------
http://www.sammobile.com/firmwares/database/SM-A500H/
Sorry my mistake I flashed with 5.0.2, flashed with recovery file via Odin still cannot boot into recovery mode, maybe I'm doing something wrong. I have the file "TWRP_2.8.7.0_LL_ODIN.tar.md5.gz". Should i flash this with odin or should i extract this file and flash with "recovery.tar.md5"?
Thanks
andrew21 said:
Sorry my mistake I flashed with 5.0.2, flashed with recovery file via Odin still cannot boot into recovery mode, maybe I'm doing something wrong. I have the file "TWRP_2.8.7.0_LL_ODIN.tar.md5.gz". Should i flash this with odin or should i extract this file and flash with "recovery.tar.md5"?
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24269982086992212
Do you have the correct samsung drivers on your pc? Does odin say added when you plug in your phone?
Did you extract the zip file you downloaded from sammobile? You should flash the tar. Md5 file.
jnvdh06 said:
https://www.androidfilehost.com/?fid=24269982086992212
Do you have the correct samsung drivers on your pc? Does odin say added when you plug in your phone?
Did you extract the zip file you downloaded from sammobile? You should flash the tar. Md5 file.
Click to expand...
Click to collapse
Odin says added when i connect the phone and i extracted the file i downloaded from sammobile....i flashed the recovery you gave me but still cannot boot into recovery mode, when i try i get red message ontop of the screen "recovery is not seandroid enforcing" and "Set warranty bit: recovery.. Any ideas?
I'm using ODIN v3.10.7 on Windows 10, could that be the problem?
Thats very odd. Usually if you flash new firmware everything would work fine.
---------- Post added at 07:28 PM ---------- Previous post was at 07:25 PM ----------
Did you load the firmware file in the AP/PDA option and only ticked auto reboot and f. Reset time
Yes I did as you said still getting problems, should I download another stock rom from sammobile, and can u suggest any specific ROM? Or should i flash a custom ROM from recovery? Please suggest
andrew21 said:
Yes I did as you said still getting problems, should I download another stock rom from sammobile, and can u suggest any specific ROM? Or should i flash a custom ROM from recovery? Please suggest
Click to expand...
Click to collapse
You can try firmware from another region. You wont be able to flash a rom of you don have recovery
jnvdh06 said:
You can try firmware from another region. You wont be able to flash a rom of you don have recovery
Click to expand...
Click to collapse
Well, i have rooted the phone and have recovery....do u suggest Stock ROM or custom ROM? If custom ROM can you suggest any one? Thanks.
Oh. I thought you said you dont have custom recovery. You can try and make stock based rom with Superr kitchen and flash that. http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296
jnvdh06 said:
Oh. I thought you said you dont have custom recovery. You can try and make stock based rom with Superr kitchen and flash that. http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296
Click to expand...
Click to collapse
Well, i flashed custom ROM but still same problem...phone just keeps on restarting????
andrew21 said:
Well, i flashed custom ROM but still same problem...phone just keeps on restarting????
Click to expand...
Click to collapse
Did you do a clean flash? Wipe system, data, cache, dalvik cache?
jnvdh06 said:
Did you do a clean flash? Wipe system, data, cache, dalvik cache?
Click to expand...
Click to collapse
Yes everything I did, I'm downloading files on wifi, could that be the problem?
andrew21 said:
Yes everything I did, I'm downloading files on wifi, could that be the problem?
Click to expand...
Click to collapse
What rom did you flash?
Downloading over wifi shouldnt be a problem. You can alway double check the md5 to see if it matches.
I flashed custom rom: CM-12.1-20151004-UNOFFICIAL-a53gxx
Help! I am still on stock kitkat and I have reactivation lock (yep I know thats the problem) on. Then I decided to install a custom recovery (twrp) via flashify and then I booted into recovery, now it says "custom binary blocked by reactivation lock" and "secure fail: recovery". If I try to reboot my phone it keeps booting into recovery mode.
My question is do I have to install the firmware all again or can I also install only the stock recovery with odin and make the phone work all again? If it is the second one... Can someone PLEASE upload a file of the kitkat recovery? Thx in regards!
dude install stock kitkat firmware for ur device and extract recovery.img inside the tar file then convert recovery.img to tar hope u understood
shahram Ali said:
dude install stock kitkat firmware for ur device and extract recovery.img inside the tar file then convert recovery.img to tar hope u understood
Click to expand...
Click to collapse
Thank you for your answer
However I did it another way lol, just flashed the whole rom all again with odin and it works flawlessly. There's no need to wipe anything.
tm60405 said:
Thank you for your answer
However I did it another way lol, just flashed the whole rom all again with odin and it works flawlessly. There's no need to wipe anything.
Click to expand...
Click to collapse
Yes cause it is reflashed stock recovery xD and phone status to offical anyway congratulations:victory:
hey guys,
first of all: S5 was not rooted and I did never flash a custom rom on this phone
a few days ago my S5 hang up and then rebooted.. it then stucks at the bootloader ("Set Warranty Bit : kernel").. I tried entering the recovery, but it doesn't work..
I tried to flash the recent stock rom (6.0.1) using download mode and Odin 3.12 and managed somehow to get to the recovery (couldn't boot android).. I wiped data and cache but that doesn't help either..
I tried flashing
- 6.0.1 (stock)
- 5.0 (stock)
- CWM recovery
- Bootloader and Modem
after flashing the rom it stucks at "Set Warranty Bit : recovery", after flashing bootloader and modem at "Set Warranty Bit : kernel" again..
thanks for your help..
stefan9310 said:
hey guys,
first of all: S5 was not rooted and I did never flash a custom rom on this phone
a few days ago my S5 hang up and then rebooted.. it then stucks at the bootloader ("Set Warranty Bit : kernel").. I tried entering the recovery, but it doesn't work..
I tried to flash the recent stock rom (6.0.1) using download mode and Odin 3.12 and managed somehow to get to the recovery (couldn't boot android).. I wiped data and cache but that doesn't help either..
I tried flashing
- 6.0.1 (stock)
- 5.0 (stock)
- CWM recovery
- Bootloader and Modem
after flashing the rom it stucks at "Set Warranty Bit : recovery", after flashing bootloader and modem at "Set Warranty Bit : kernel" again..
thanks for your help..
Click to expand...
Click to collapse
Try to reinstall the firmware using samsung smart switch
KillersEnergy said:
Try to reinstall the firmware using samsung smart switch
Click to expand...
Click to collapse
that doesn't work for me still getting "Set Warranty Bit : recovery"..
stefan9310 said:
that doesn't work for me still getting "Set Warranty Bit : recovery"..
Click to expand...
Click to collapse
Download the firmware from fw.updato.com(IMHO is better than sammobile because you can download firmware without speed cap) then extract boot.img and recovery.img from the firmware archive (tar.md5) that you have downloaded and using 7zip make a .tar archive with those file and flash the tar with odin
KillersEnergy said:
Download the firmware from fw.updato.com(IMHO is better than sammobile because you can download firmware without speed cap) then extract boot.img and recovery.img from the firmware archive (tar.md5) that you have downloaded and using 7zip make a .tar archive with those file and flash the tar with odin
Click to expand...
Click to collapse
doesn't work too still getting the same messages.. S5 tries now to boot rom on startup ("...kernel") again and when I try to boot the recovery, I still get "...recovery"..
stefan9310 said:
doesn't work too still getting the same messages.. S5 tries now to boot rom on startup ("...kernel") again and when I try to boot the recovery, I still get "...recovery"..
Click to expand...
Click to collapse
Are you sure that you are downloading the right firmware? What model do you have?
KillersEnergy said:
Are you sure that you are downloading the right firmware? What model do you have?
Click to expand...
Click to collapse
yes, pretty sure.. SM-G900F, as it was written in the title.. I used this one from here..
stefan9310 said:
yes, pretty sure.. SM-G900F, as it was written in the title.. I used this one from here..
Click to expand...
Click to collapse
So smart switch and firmware restore didn't work...the last thing you could try is that method but IT WILL ERASE ALL YOUR DATA exept external-sdcard but pull it out of the phone to be sure,if you have one...
So the method is:
1)Download samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
2)Config it like that: Region= DBT,Model=SM-G900F,check this option: auto,binary nature,check CRC32 and decrypt automatically
3)extract the firmware from the zip in a folder and you should have 4 tar.md5 archives: BL,AP,CP,CSC (with their infos)
4)Download the latest version of odin (3.12.3 as of now) from here http://forum.xda-developers.com/showthread.php?t=2711451,open it and control that Auto-Reboot and F. Reset Time are checked and be sure that Re-Partition is NOT checked put the archives in their right place and flash the phone
5)If the phone doesn't boot,pull the battery for 20 sec and reboot in recovery then wipe data and cache
KillersEnergy said:
So smart switch and firmware restore didn't work...the last thing you could try is that method but IT WILL ERASE ALL YOUR DATA exept external-sdcard but pull it out of the phone to be sure,if you have one...
So the method is:
1)Download samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
2)Config it like that: Region= DBT,Model=SM-G900F,check this option: auto,binary nature,check CRC32 and decrypt automatically
3)extract the firmware from the zip in a folder and you should have 4 tar.md5 archives: BL,AP,CP,CSC (with their infos)
4)Download the latest version of odin (3.12.3 as of now) from here http://forum.xda-developers.com/showthread.php?t=2711451,open it and control that Auto-Reboot and F. Reset Time are checked and be sure that Re-Partition is NOT checked put the archives in their right place and flash the phone
5)If the phone doesn't boot,pull the battery for 20 sec and reboot in recovery then wipe data and cache
Click to expand...
Click to collapse
doesn't work again phone tries to boot to recovery instantly with the same error message ("Set Warranty Bit : recovery").. so I didn't manage to wipe data and cache (again)..
stefan9310 said:
doesn't work again phone tries to boot to recovery instantly with the same error message ("Set Warranty Bit : recovery").. so I didn't manage to wipe data and cache (again)..
Click to expand...
Click to collapse
Does it boot in stock recovery?
Go to download mode and check for:
Current Binary
System Status
Knox Warranty Void
KillersEnergy said:
Does it boot in stock recovery?
Go to download mode and check for:
Current Binary
System Status
Knox Warranty Void
Click to expand...
Click to collapse
No, stock recovery was flashed nearly the whole time.. CWM recovery only 5min to check whether it would help..
Current Binary: Custom
System Status: Custom
Knox Warranty Void: 0x1 (2)
stefan9310 said:
No, stock recovery was flashed nearly the whole time.. CWM recovery only 5min to check whether it would help..
Current Binary: Custom
System Status: Custom
Knox Warranty Void: 0x1 (2)
Click to expand...
Click to collapse
Are you really sure that you have a G900F lol,the possibility are 2
1)the bootloader keys are corrupted so every recovery get recognized as custom(that's quite impossible)
2)you have a different phone number
I think that's the 2 because a stock recovery signed by samsung can't get recognized as custom and after a complete firmware reinstallaton custom binary status should be "Samsung Official"...
Try to pull the battery and read the info at "Model"
KillersEnergy said:
Are you really sure that you have a G900F lol,the possibility are 2
1)the bootloader keys are corrupted so every recovery get recognized as custom(that's quite impossible)
2)you have a different phone number
I think that's the 2 because a stock recovery signed by samsung can't get recognized as custom and after a complete firmware reinstallaton custom binary status should be "Samsung Official"...
Try to pull the battery and read the info at "Model"
Click to expand...
Click to collapse
yeah I know.. I'm also a "bit" confused..
that's where I get the Model from.. SM-G900F.. 100% sure..
stefan9310 said:
yeah I know.. I'm also a "bit" confused..
that's where I get the Model from.. SM-G900F.. 100% sure..
Click to expand...
Click to collapse
Do your phone boot now?
If it doesn't then probably the eMMc is broken...
KillersEnergy said:
Does your phone boot now?
Click to expand...
Click to collapse
nope.. tries to boot recovery instantly on startup but fails.. looks like this.. stuck at this message
stefan9310 said:
nope.. tries to boot recovery instantly on startup but fails.. looks like this.. stuck at this message
Click to expand...
Click to collapse
It happen when you flash wrong boot.img(kernel) or/and system.img or a complete different firmware...try to download a casual custom kernel (for G900F) and flash it
---------- Post added at 05:11 PM ---------- Previous post was at 05:02 PM ----------
stefan9310 said:
yeah I know.. I'm also a "bit" confused..
that's where I get the Model from.. SM-G900F.. 100% sure..
Click to expand...
Click to collapse
The last things i could think will solve the problem is try to downgrade to lollipop or kitkat or try another marshmallow firmware...if that doesn't work your phone is broken and you have to take it to a samsung service center and hope they doe sn't refuse your warranty due to knox 0x1...if they notice that you could try to say that the recovery error tripped knox even if it's stock
P.s.: Is your phone refurbished?
KillersEnergy said:
It happen when you flash wrong boot.img(kernel) or/and system.img or a complete different firmware...try to download a casual custom kernel (for G900F) and flash it
---------- Post added at 05:11 PM ---------- Previous post was at 05:02 PM ----------
The last things i could think will solve the problem is try to downgrade to lollipop or kitkat or try another marshmallow firmware...if that doesn't work your phone is broken and you have to take it to a samsung service center and hope they doe sn't refuse your warranty due to knox 0x1...if they notice that you could try to say that the recovery error tripped knox even if it's stock
P.s.: Is your phone refurbished?
Click to expand...
Click to collapse
I just flashed this kernel but same result..
I tried to downgrade yesterday but it also doesn't fix the problem.. well warranty is over since august..
nope.. was a new one
stefan9310 said:
I just flashed this kernel but same result..
I tried to downgrade yesterday but it also doesn't fix the problem.. well warranty is over since august..
nope.. was a new one
Click to expand...
Click to collapse
1)flash twrp boot it and place a boot.img on sdcard then go to advanced->terminal and exec:
dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/boot
If it doesn't work
2)go to the folder where you have extracted samfirm firmware open the csc archive with 7zip and extract the .pit file in the same folder,then open odin place all the 4 file in the right place go to pit and place there the pit file you have extracted and this time CHECK the repartition flag if is not checked check it by yourself or the pit will not have any effect
KillersEnergy said:
1)flash twrp boot it and place a boot.img on sdcard then go to advanced->terminal and exec:
dd if=/sdcard/boot.img of=/dev/block/platform/msm_sdcc.1/by-name/boot
If it doesn't work
2)go to the folder where you have extracted samfirm firmware open the csc archive with 7zip and extract the .pit file in the same folder,then open odin place all the 4 file in the right place go to pit and place there the pit file you have extracted and this time CHECK the repartition flag if is not checked check it by yourself or the pit will not have any effect
Click to expand...
Click to collapse
1) can not boot to recovery again..
2) failed to boot to recovery after reboot.. removed battery and started again.. show up "Installing system update" and after that "Erasing" but still failed to boot (rom / recovery).. Still the same information in download mode (Custom, Custom, 0x1 (2))
stefan9310 said:
1) can not boot to recovery again..
2) failed to boot to recovery after reboot.. removed battery and started again.. show up "Installing system update" and after that "Erasing" but still failed to boot (rom / recovery).. Still the same information in download mode (Custom, Custom, 0x1 (2))
Click to expand...
Click to collapse
I'm sorry but if even the repartition doesn't work your phone is probably dead ,i think something in the motherboard(that would mean it's a hardware failure and not software problem and i think is unsolvable even with a jtag) like an eMMc partially broken and/or some printed circuit "burned" and/or other hardware part necessary to boot the recovery,kernel stopped working and that would explain:
1)why only download mode work(download mode is in sbl(secondary bootloader) partition that it's a part of the bootloader )
2)the bootloader behaviour("Set Warranty bit" even on stock partition)
3)and why none of the solutions worked
You could try to change the battery but i don't know if it will work...at least we tried
SORRY ABOUT MY BAD ENGLISH
I am writing this tread because i recently unlocked the frp lock on my bricked ROOTED samsung galaxy note 5 (SM-N920C). I faced problem in flashing stock firmware as my phone lost drk. And hence i do research and it took about a month to find a solution. I am sharing it here.
Tools i used.
1. Samsung tool pro( cracked version)
2. SM-N920C Combination file:
http://shell.boxwares.com/default.aspx?DeviceModel=SM-N920C&Type=All#fh5co-table
Because i am on nougat firmware the Samsung tool pro doesn't work and at the same time i am not able to down grade the firmware due to frp lock.
3. TWRP RECOVERY
https://twrp.me/samsung/samsunggalaxynote5.html
PROCEDURE:
1. Flash the combination file in download mode. And wait for the phone to boot. In my case the phone doesn't boot.
Then go to download mode agian and remove frp lock with samsung tool.
2. Flash TWRP.
3. Flash any custome rom from TWRP. :good:
simply go to download mode and flash official firmware
after phone starts go to settings>>developer mode>>enable oem unlock toggle
that's all no frp lock anymore. i wonder why it took you 1 month to figure this out.
tucking fypo said:
simply go to download mode and flash official firmware
after phone starts go to settings>>developer mode>>enable oem unlock toggle
that's all no frp lock anymore. i wonder why it took you 1 month to figure this out.
Click to expand...
Click to collapse
Actually, when the phone is under the frp lock. Flashing stock firmware under odin will not work. At least it happened to my n920g. I used the emergency restore through the samsung smart switch app.
Sent from my SM-N920G using XDA-Developers Legacy app
loppv said:
Actually, when the phone is under the frp lock. Flashing stock firmware under odin will not work. At least it happened to my n920g. I used the emergency restore through the samsung smart switch app.
Sent from my SM-N920G using XDA-Developers Legacy app
Click to expand...
Click to collapse
but i could easily go to download mode even with frp lock on. only i could not restart my phone and not enter twrp. but download mode worked fine forme
Since i lost Drk i can't able to boot after repair with smart switch. And thats why i tried this method.
rahulkr0507 said:
Since i lost Drk i can't able to boot after repair with smart switch. And thats why i tried this method.
Click to expand...
Click to collapse
It's simple flash twrp with odin and flash magisk or supersu with twrp and voila...the phone is booted with stock rooted kernel
ebusuhejbi said:
It's simple flash twrp with odin and flash magisk or supersu with twrp and voila...the phone is booted with stock rooted kernel
Click to expand...
Click to collapse
We can't able to flash custom recovery in this case. The phone will not allow it.
ebusuhejbi said:
It's simple flash twrp with odin and flash magisk or supersu with twrp and voila...the phone is booted with stock rooted kernel
Click to expand...
Click to collapse
flashing any custom recovery wont work on frp locked. it will fail in odin.
If flash stock boot the phone and check oem unlock
Drk matters
ebusuhejbi said:
If flash stock boot the phone and check oem unlock
Click to expand...
Click to collapse
If there is no drk in the phone it won't boot. I lost drk and not able to flash the stock rom.
rahulkr0507 said:
If there is no drk in the phone it won't boot. I lost drk and not able to flash the stock rom.
Click to expand...
Click to collapse
And I lost drk but seems i checked the oem unlock on when rooted the phone and when I flash stock firmware the phone is booted without drk but I can flash twrp with odin and reroot the phone again
ebusuhejbi said:
And I lost drk but seems i checked the oem unlock on when rooted the phone and when I flash stock firmware the phone is booted without drk but I can flash twrp with odin and reroot the phone again
Click to expand...
Click to collapse
Yes its possible but in my case the oem unlock git disabled i dont know how its happened. After that i can't do anything other than the above procedures to make the device working.
Could you change the destination of SM-N920C Combination file, because I can`t download it from your link. Thank you.
Try to rename firmware .tar.md5 to .tar (remove.md5).and flash it via odin .it work
lawong said:
flashing any custom recovery wont work on frp locked. it will fail in odin.
Click to expand...
Click to collapse
try rename firmware original samsung from .tar.md5 to .tar only(remove.md5).and flash it via odin again.it work for me
tassotti said:
Could you change the destination of SM-N920C Combination file, because I can`t download it from your link. Thank you.
Click to expand...
Click to collapse
Its not my link i just given the link from i downloaded the files.
I just checked the link and its working.
rahulkr0507 said:
Its not my link i just given the link from i downloaded the files.
I just checked the link and its working.
Click to expand...
Click to collapse
I found this file on another place. Thank you.
Sent from my SM-N920C using Tapatalk
Help with FRP Locked
I need help with this. I have tried several methods, 2 different ODIN versions, several different firmwares...I cannot get out of FRP lock. Please, Please help me.
Please explain the problem in detail. Whats shown in phone about the failure?
lonewolf5557 said:
I need help with this. I have tried several methods, 2 different ODIN versions, several different firmwares...I cannot get out of FRP lock. Please, Please help me.
Click to expand...
Click to collapse
Flashing firmwares will not undo FRP. No matter how many you flash. Solving the FRP problem lies elsewhere. And to another comment some FRp locked sammys will flash in odin under lock,Others will not. FRP lock is contained in a Partition in the device that is not touched by odin. If flashing orig stock firmware does not boot due to DRK problem then that has to be addressed first. I have not had a Note 5 in a while but This much I do know.
TheMadScientist said:
Flashing firmwares will not undo FRP. No matter how many you flash. Solving the FRP problem lies elsewhere. And to another comment some FRp locked sammys will flash in odin under lock,Others will not. FRP lock is contained in a Partition in the device that is not touched by odin. If flashing orig stock firmware does not boot due to DRK problem then that has to be addressed first. I have not had a Note 5 in a while but This much I do know.
Click to expand...
Click to collapse
Where do I start then, please. Thank you.