Related
Hi guys,
I'm providing a solution which was found by member kv123 to install and use D6603 Lollipop update on D6633
I seriously suggest you to wait for an official D6633 Lollipop update which we are not far away from it's release. I'm not responsible for any damage that may happen to your phone. You take the risk by yourself
At first step you need a rooted device and a recovery installed. For those who doesn't have any, use below link to find how you can root your D6633 phone:
http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
At next step you have to flash the zip file of pre-rooted D6603 Lollipop firmware in recovery, provided in the below link (Wipe your phone before flashing pre-rooted. Zip including dalvick and cache, and do not reboot your phone before flashing radio patch in next step) :
http://forum.xda-developers.com/z3/development/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Now you have to flash a zip which will patch radio to activate both Sims on your Xperia Z3 Dual phone (After flashing this radio patch do a factory reset directly from recovery before rebooting to system) :
http://d-h.st/MwgK
Not working:
-USSD code
-Settings->Calls force close
Thanks to: kv123
I saw the method yesterday by luck and it worked. Thank you for creating a thread for this to make it easier to find. And thank you kv123
minamfm said:
I saw the method yesterday by luck and it worked. Thank you for creating a thread for this to make it easier to find. And thank you kv123
Click to expand...
Click to collapse
i try many method but no luck in booting z3 dual in home menu.
this method my phone start normally and android is upgrading about 328 app,
to can enter to settings i can enter from the lock screen i swipe down the screen to notification and enter to the settings menu
the camera work from the shutter key, and the manual mode dosnt work i get errore camera not found.
when try to go to the home , or from booting to hme i get errore in home screen or home menu,
both sim working but with this errore i cant use my phone cz i cant go to any application.
Unfortunately, InitialBootSetup has stopped.
i try this method and it work.
i go to z3 d6603 firmware ftf .93 and i root it
it flash the patch to z3dual work , and both sim work.
after i preserve root of android 5 .690
my phone work perfectly now.
this is the safe method to z3 dual work in android 5 firmware of z3 d6603.
10x you
Great!!!!!!
Thaaaaanks alot.. It worked awesome update..
I have two problems :
- I can't use USSD services.. Can't see my credit
- I can't choose which sim will use when sending a message..
Is there a solution?
Sent from my D6603 using XDA Free mobile app
The only problem is the phone force closing when trying to enter the setting.
Other than that, everything works fine. Both sims work.
same problem
alfatih610 said:
Great!!!!!!
Thaaaaanks alot.. It worked awesome update..
I have two problems :
- I can't use USSD services.. Can't see my credit
- I can't choose which sim will use when sending a message..
Is there a solution?
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
same problem if you update to android 5 and flash the patch
Thank U
running almost one hundred percent
Error in call settings
error in the USSD code
message does not select which chip
sorry my bad English I'm from Brazil
alfatih610 said:
Great!!!!!!
Thaaaaanks alot.. It worked awesome update..
I have two problems :
- I can't use USSD services.. Can't see my credit
- I can't choose which sim will use when sending a message..
Is there a solution?
Sent from my D6603 using XDA Free mobile app
Click to expand...
Click to collapse
Solution, not yet. But i don't have any problem with choosing default Sim for sending sms, its just a restriction not an issue. About USSD its the only thing that is not working for me and i have left it till the release of D6633 Lollipop firmware
Wow it's great Everything is working fine 100% Awesome. In my country you had to wait more for an official update but it is doing everything :good:
persian_redhat said:
Hi guys,
I'm providing a solution which was found by member kv123 to install and use D6603 Lollipop update on D6633
I seriously suggest you to wait for an official D6633 Lollipop update which we are not far away from it's release. I'm not responsible for any damage that may happen to your phone. You take the risk by yourself
At first step you need a rooted device and a recovery installed. For those who doesn't have any, use below link to find how you can root your D6633 phone:
http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
At next step you have to flash the zip file of pre-rooted D6603 Lollipop firmware in recovery, provided in the below link (Wipe your phone before flashing pre-rooted. Zip including dalvick and cache, and do not reboot your phone before flashing radio patch in next step) :
http://forum.xda-developers.com/z3/development/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Now you have to flash a zip which will patch radio to activate both Sims on your Xperia Z3 Dual phone (After flashing this radio patch do a factory reset directly from recovery before rebooting to system) :
http://d-h.st/MwgK
Not working:
-USSD code
-Settings->Calls force close
Thanks to: kv123
Click to expand...
Click to collapse
Thanks a lot man! Your step by step manual is great and its working
Also i must say, that you are a great person, because you found a time, you added me on line and you were converse with me while i was doing this Without you, i think, i would be on 4.4.4 now
But here is 1 thing i dont like... On lock screen on the bottom here is an ugly inscription: Sim1, Sim2 etc... But its only a cosmetic defect I am not using USSD
Thank you very much again!
Hey buddy
Thanks a lot, just flashed the lollipop build and patch. All good.
Like you said only call settings not working.. Does any one have any idea on how to get it working? If possible.
And also any eta update on d6633 getting lollipop.. Checking the net and can't find any recent update or eta
I can use this patch whit official cm 12?
I have question
After syncing my contacts when a call comes in the call screen shows one solid color (for e.g. blue) and then the contact picture in small circle.
Is normal?? doesnt the call picture take half the screen instead of a small circle?? Is this happening for everyone on D6633 with this lollipop firmware?
jagdesh said:
I have question
After syncing my contacts when a call comes in the call screen shows one solid color (for e.g. blue) and then the contact picture in small circle.
Is normal?? doesnt the call picture take half the screen instead of a small circle?? Is this happening for everyone on D6633 with this lollipop firmware?
Click to expand...
Click to collapse
If i got what you said in a right way, yes its normal and one of the features of Lollipop. If you touch the blue screen message of incoming call, it will fill all the screen then, and you'll see full-screen contact picture
mercuriox85 said:
I can use this patch whit official cm 12?
Click to expand...
Click to collapse
I don't think so
persian_redhat said:
If i got what you said in a right way, yes its normal and one of the features of Lollipop. If you touch the blue screen message of incoming call, it will fill all the screen then, and you'll see full-screen contact picture
Click to expand...
Click to collapse
Now I am confused!!
Anyways here is the a screen shot .... As you can see the contact picture appears to be in a small circle and the background is all blue.
Is this normal? I thought the blue solid color screen part should be filled with the contact picture isnt it?
jagdesh said:
Now I am confused!!
Anyways here is the a screen shot .... As you can see the contact picture appears to be in a small circle and the background is all blue.
Is this normal? I thought the blue solid color screen part should be filled with the contact picture isnt it?
Click to expand...
Click to collapse
You have to ask it on Android 5.0 L for Z3 thread as I think its about Sony's update and not related to radio patch
persian_redhat said:
You have to ask it on Android 5.0 L for Z3 thread as I think its about Sony's update and not related to radio patch
Click to expand...
Click to collapse
Is this the way it looks for you or everyone else using lollipop with radio patch on D6633??
the reason I am asking this here first is that maybe its due to the different model firmwares being flashed...If this is the way it looks for all D6633 lollipop users then its okay other if this only for me then I will check in the lollipop thread..
BTW this is how its looks when you make a call, similar is the look for incoming calls
persian_redhat said:
You have to ask it on Android 5.0 L for Z3 thread as I think its about Sony's update and not related to radio patch
Click to expand...
Click to collapse
It seems this is bug which is appearing in the ported lollipop version ... I had asked this in the Lollipop for z3 thread and some users have reported that this is bug since the official lollipop version does not have this bug.
Any other users with D6633 on lollipop see this type of call screen?
Lolipop Update
Finally lollipop certified by PTCRB
Build Number : 23.1.1.E.0.1
I made this post to gather all Honor 6+ owners from KSA and UAE who bought it from souq (dot) com to share their problems, questions and experiences.
My experience is excellent with 6+. but when i upgraded it to lollipop, all gestures functions were gone!
No double tap to wake screen, no draw to open apps .. even all motion settings like flip mob to mute were disappeared
I used this file for upgrading:
hxxp://7961b64fc16ad15a92ef-9f98f1eddca1ebd26a80f4b64e8bd016.r62.cf3.rackcdn.com/downloads/PE-TL10C900B324.zip
(replace hxxp with http)
I downloaded it from here:
hxxp://hihonor.com/en/pages/support#?view=downloads
(replace hxxp with http)
I tried a factory reset, but it always fail at 10%
I can't call huawei support as i am outside of ksa now.
Any one faced the same problems when upgrading to lollipop?
not yet updated because of these problems. Can you check in gestures settings, if these features are still available? I purchased from Souq UAE
I tried flashing Latest 5.1.1 Chinese Stable Developer Edition , and then use downgrade package provided on Huawei Club Forum by chinese guys , but failed also.
Akram. said:
not yet updated because of these problems. Can you check in gestures settings, if these features are still available? I purchased from Souq UAE
Click to expand...
Click to collapse
No gestures options at all after upgrading. May you call customer support to ask them about this problem,and when the official upgrade for uae and ksa will be released?
I think that phones provided by souq.com have a modified software(i can't understand why )
So all of MENA region custmores have a buggy update.
We should contact with local provider & huawei to get our rights
any news about this dam update ?
http://forum.xda-developers.com/honor-6/general/huawei-honor-6-plus-tl10-b334-lollipop-t3278098
any one try this
zezo_ddd said:
http://forum.xda-developers.com/honor-6/general/huawei-honor-6-plus-tl10-b334-lollipop-t3278098
any one try this
Click to expand...
Click to collapse
Yes, and it is working like charm!
All problem were solved now.
anyone faces touch problems
with me sometimes areas in screen does't respond and after restart all things goes fine
zezo_ddd said:
anyone faces touch problems
with me sometimes areas in screen does't respond and after restart all things goes fine
Click to expand...
Click to collapse
yes! .. this happened with me for just one time at the top left corner of screen, but it did't repeate after restart until now.
PE-TL10
I have (6+) I bought it from (souq.com) and it was 4.4.4 b135 . I download a lot of update for lollypop and one of them woks but as any one whoa update to lollypop ((double touch, switch 4g button and drawing)) I lost them
my update is
5.1.1. (b310) <<<< from where I get it I don't know
i don't know what I do. i'm scare I lost it when I try to search for another update
AmeerAdel said:
yes! .. this happened with me for just one time at the top left corner of screen, but it did't repeate after restart until now.
Click to expand...
Click to collapse
PRNS777 said:
I have (6+) I bought it from (souq.com) and it was 4.4.4 b135 . I download a lot of update for lollypop and one of them woks but as any one whoa update to lollypop ((double touch, switch 4g button and drawing)) I lost them
my update is
5.1.1. (b310) <<<< from where I get it I don't know
i don't know what I do. i'm scare I lost it when I try to search for another update
Click to expand...
Click to collapse
Hi Guys,
Check out the Lollipop and Marshmallow update here
http://forum.xda-developers.com/honor-6/general/honor-6-heres-how-update-manually-to-t3323661
I bought my Honor 6+ from Souq.com UAE last month. As i'm residing in India and using Vodafone as my service provider but not able to access data internet (2G/3G/4G) in my phone (working fine with Wifi). It is displaying the 3G/4G symbol at the top but somehow its not working even after getting all the configuration done that is provided by Vodafone.
I tried with multiple service providers (Airtel/Reliance/Aircel/Idea) but its not working either, although the data net is working in another phone using the same SIM. Please help me , let me know if anyone else having the same issue.
I tried the B334 Russia, and it worked fine, but I bricked my phone after I tried to update to the marshmallow as per the following update link but I made one mistake that I did unzipped the 503 update.zip pachage and i only took the update.app file and put it on the dload folder, after that i was unable to boot my phone again,
http://forum.xda-developers.com/hono...ly-to-t3323661
and after several attempts to flash so many versions like (B130, B135, B300, B500, B503, B224, B334, B332, B510) I was able by the adb method to update to the latest Marshmallow update of UAE B510 but wifi and Bluetooth don't work anymore, and the mac address shows zeros 02:00:00:00:00 , ANY SUGGESTIONS?
in addition could someone told me the original firmware version that PE-TL10 in saudi comes with and where I can downloaded
Hi guys:
I am Nokia 6 TA 1000 user, I got my Oreo update , everything is working fine,except one most important option.
Enhanced 4g LTE mode.
I am using Jio 4g sim which will provide volte now I am not able use that option and I am not able to make a call, incoming call also not receiving.
Actually before Oreo update I was able to use that option which is available in mobile network settings ,but now I am not getting that option. When I search that option in settings its coming in search results but when I click and navigate I am not getting that.
I think viewers able to understand my issue :crying:
Kindly share your knowledge about these guys I really frustrated by contacting mobile network and Nokia support none of them are helping. I think you guys will find any solution for this thanks advance for your reply.
rpk2005 said:
Hi guys:
I am Nokia 6 TA 1000 user, I got my Oreo update , everything is working fine,except one most important option.
Enhanced 4g LTE mode.
I am using Jio 4g sim which will provide volte now I am not able use that option and I am not able to make a call, incoming call also not receiving.
Actually before Oreo update I was able to use that option which is available in mobile network settings ,but now I am not getting that option. When I search that option in settings its coming in search results but when I click and navigate I am not getting that.
I think viewers able to understand my issue :crying:
Kindly share your knowledge about these guys I really frustrated by contacting mobile network and Nokia support none of them are helping. I think you guys will find any solution for this thanks advance for your reply.
Click to expand...
Click to collapse
First of all use preferred network mode as LTE then it might appear there, also it because, TA-1000 is Chinese varient so this might have the issue with network band support, try change the network type as LTE
If doesn't work
Dial *#*#4636#*#*
Select phont info
Then preferred network type as LTE/WCDMA
sltushar said:
First of all use preferred network mode as LTE then it might appear there, also it because, TA-1000 is Chinese varient so this might have the issue with network band support, try change the network type as LTE
If doesn't work
Dial *#*#4636#*#*
Select phont info
Then preferred network type as LTE/WCDMA
Click to expand...
Click to collapse
I even tried your steps bro.I am not getting that option.even I contacted mobile network team from their side everything is good..if I use same sim to other mobile its working good.
Kindly help on my issue.
Thanks in advance
rpk2005 said:
I even tried your steps bro.I am not getting that option.even I contacted mobile network team from their side everything is good..if I use same sim to other mobile its working good.
Kindly help on my issue.
Thanks in advance
Click to expand...
Click to collapse
Okay, so the problem is confirmed
Due to Chinese varient, after oreo update they removed VoLTE option
But there is still option
Try resetting your device
Hope it will work
If not
Tell me
I will tell you one more solution
sltushar said:
Okay, so the problem is confirmed
Due to Chinese varient, after oreo update they removed VoLTE option
But there is still option
Try resetting your device
Hope it will work
If not
Tell me
I will tell you one more solution
Click to expand...
Click to collapse
I tried resetting my phone its not working . kindly give me some solution bro.
Thanks in advance for your reply
rpk2005 said:
I tried resetting my phone its not working . kindly give me some solution bro.
Thanks in advance for your reply
Click to expand...
Click to collapse
Goto this 1st page of this thread
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
Download December nougat OTA and February oreo OTA
Put them into the External SD card
Goto recovery mode
If you don't know how to enter to recovery
Follow this steps
Power off your device
Now plug your charger
Wait for battery charging animation
Once you see the animation
Press and Hold power button and volume plus button
As soon as you see the android logo
Release the power button but keep holding volume plus button
After few seconds you will see a screen with written no commands
Now release volume plus key
And just hit these three button together, don't hold it
Power button+volume plus button+home key(fingerprint sensor)
2-3 times, and you will see the recovery menu
If not, try holding power and volume plus button for few seconds
After having the recovery menu
Goto the option, update from sd card, remember internal storage wont show here so you need to have the sd card
Goto the location where you kept those 2 files
Now first install December OTA
It will give you error but dont worry
Just restart your device
And you will be enter to the recovery menu automatically
Now again select updates from sd card
And now this time select February oreo OTA
Done, it will reboot automatically once it installed
One more thing after update reset your device or you will face some bugs
Enjoy
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Goto this 1st page of this thread
https://forum.xda-developers.com/nokia-6/how-to/updated-mirror-link-ota-monthly-updates-t3733784
Download December nougat OTA and February oreo OTA
Put them into the External SD card
Goto recovery mode
If you don't know how to enter to recovery
Follow this steps
Power off your device
Now plug your charger
Wait for battery charging animation
Once you see the animation
Press and Hold power button and volume plus button
As soon as you see the android logo
Release the power button but keep holding volume plus button
After few seconds you will see a screen with written no commands
Now release volume plus key
And just hit these three button together, don't hold it
Power button+volume plus button+home key(fingerprint sensor)
2-3 times, and you will see the recovery menu
If not, try holding power and volume plus button for few seconds
After having the recovery menu
Goto the option, update from sd card, remember internal storage wont show here so you need to have the sd card
Goto the location where you kept those 2 files
Now first install December OTA
It will give you error but dont worry
Just restart your device
And you will be enter to the recovery menu automatically
Now again select updates from sd card
And now this time select February oreo OTA
Done, it will reboot automatically once it installed
One more thing after update reset your device or you will face some bugs
Enjoy
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
Thanks for ur reply bro
Whether there is any possible way without flashing device...
Its TA 1021 ROM whether it will support TA 1000...
And I have to confirm if we receive other updates from hmd for 1021 whether I can able to install that or whether I will receive all security patch updates..??
Else I any of your team guys having TA 1000 stock ROM with January update ..if you guys have please share that .kindly give me steps to install that....on my mobile then will be in 7.1 with January security patch. If I go for update and search I will get Oreo update if I want to switch I can able to switch to Oreo bro..
I think you understand my queries if u are able to help kindly give solution . many of the guys using TA 1000 are facing this issue..why they got disabled this option ..really frustrated bro
Thanks for your reply bro
rpk2005 said:
Thanks for ur reply bro
Whether there is any possible way without flashing device...
Its TA 1021 ROM whether it will support TA 1000...
And I have to confirm if we receive other updates from hmd for 1021 whether I can able to install that or whether I will receive all security patch updates..??
Else I any of your team guys having TA 1000 stock ROM with January update ..if you guys have please share that .kindly give me steps to install that....on my mobile then will be in 7.1 with January security patch. If I go for update and search I will get Oreo update if I want to switch I can able to switch to Oreo bro..
I think you understand my queries if u are able to help kindly give solution . many of the guys using TA 1000 are facing this issue..why they got disabled this option ..really frustrated bro
Thanks for your reply bro
Click to expand...
Click to collapse
Look the answer is same, this is Chinese varient of nokia 6 so why they disabled this option i even don't know
Yes, this is TA-1025 OTA, and you will able to get the future updates also
No need to go back,
The problem is you device's bootloader is updated and downgrade could make your device dead or something else, thats why i preferred the above option to solve your issue
So i would suggest you to go with the method i provided above
Hit Thanks button if you find this useful
Happy flashing
sltushar said:
Look the answer is same, this is Chinese varient of nokia 6 so why they disabled this option i even don't know
Yes, this is TA-1025 OTA, and you will able to get the future updates also
No need to go back,
The problem is you device's bootloader is updated and downgrade could make your device dead or something else, thats why i preferred the above option to solve your issue
So i would suggest you to go with the method i provided above
Hit Thanks button if you find this useful
Happy flashing
Click to expand...
Click to collapse
In the given link what are the two files I have to download.
Kindly give me details
Thanks
rpk2005 said:
In the given link what are the two files I have to download.
Kindly give me details
Thanks
Click to expand...
Click to collapse
December 2017 OTA and February Official Oreo OTA
rpk2005 said:
Hi guys:
I am Nokia 6 TA 1000 user, I got my Oreo update , everything is working fine,except one most important option.
Enhanced 4g LTE mode.
I am using Jio 4g sim which will provide volte now I am not able use that option and I am not able to make a call, incoming call also not receiving.
Actually before Oreo update I was able to use that option which is available in mobile network settings ,but now I am not getting that option. When I search that option in settings its coming in search results but when I click and navigate I am not getting that.
I think viewers able to understand my issue :crying:
Kindly share your knowledge about these guys I really frustrated by contacting mobile network and Nokia support none of them are helping. I think you guys will find any solution for this thanks advance for your reply.
Click to expand...
Click to collapse
https://forum.xda-developers.com/nokia-6/how-to/ta-1000-1003-oreo-instruction-to-flash-t3746460
Flash TA-1003 firmware (global version), it's full compatible with TA-1000, not use TA-1025 or TA-1021 (diferent phones).
ACARAGIA said:
https://forum.xda-developers.com/nokia-6/how-to/ta-1000-1003-oreo-instruction-to-flash-t3746460
Flash TA-1003 firmware (global version), it's full compatible with TA-1000, not use TA-1025 or TA-1021 (diferent phones).
Click to expand...
Click to collapse
Thanks bro but without flashing any other possible way is there to solve that problem??.
Then kindly share detailed steps for flashing 1000 to 1003
It will be useful for many guys to escape from this problem..
rpk2005 said:
Thanks bro but without flashing any other possible way is there to solve that problem??.
Click to expand...
Click to collapse
No.
ACARAGIA said:
No.
Click to expand...
Click to collapse
I am with Feb patch now any steps I need to change or same process which you have mentioned
I am using TA-1003 and there is same issue. I am not able to call also. It was ok with 7.1 but it failed after Oreo Update. I am waiting for March Security Update but not sure if this problem will be sorted out or not!
irphanahmad said:
I am using TA-1003 and there is same issue. I am not able to call also. It was ok with 7.1 but it failed after Oreo Update. I am waiting for March Security Update but not sure if this problem will be sorted out or not!
Click to expand...
Click to collapse
Then I won't flash with TA 1003 even after flashing if it won't work then it will be waste.
Go through TA-1025, THIS WILL HELP U
sltushar said:
Go through TA-1025, THIS WILL HELP U
Click to expand...
Click to collapse
I think 1025 is us variant whether it will support VOlTE I need to know after Oreo update 1025 is really good in volte function or not???
If is OK then I need files and steps to flash on TA 1000 to TA 1025.
Else I need another confirmation, I am in India .whether I can able to flash my TA 1000 to Indian os version it is compatible???
Indian Oreo version of Nokia is supporting volte function so will try to flash that.
Kindly help and thanks for ur reply
rpk2005 said:
I think 1025 is us variant whether it will support VOlTE I need to know after Oreo update 1025 is really good in volte function or not???
If is OK then I need files and steps to flash on TA 1000 to TA 1025.
Else I need another confirmation, I am in India .whether I can able to flash my TA 1000 to Indian os version it is compatible???
Indian Oreo version of Nokia is supporting volte function so will try to flash that.
Kindly help and thanks for ur reply
Click to expand...
Click to collapse
1025,1021,1033,1039 all work VoLTE
---------- Post added at 10:59 AM ---------- Previous post was at 10:56 AM ----------
rpk2005 said:
I think 1025 is us variant whether it will support VOlTE I need to know after Oreo update 1025 is really good in volte function or not???
If is OK then I need files and steps to flash on TA 1000 to TA 1025.
Else I need another confirmation, I am in India .whether I can able to flash my TA 1000 to Indian os version it is compatible???
Indian Oreo version of Nokia is supporting volte function so will try to flash that.
Kindly help and thanks for ur reply
Click to expand...
Click to collapse
1025,1021,1033,1039 all supports VoLTE after oreo
sltushar said:
1025,1021,1033,1039 all work VoLTE
---------- Post added at 10:59 AM ---------- Previous post was at 10:56 AM ----------
1025,1021,1033,1039 all supports VoLTE after oreo
Click to expand...
Click to collapse
Thanks kindly share steps and files to flash 1025
Guys, please help, my phone was updated to pie. Since I didn't like I reverted back to Oreo. Now I'm in 8.0. I don't know what I did but I can't hear ear piece volume, or loud speaker, network problems, sim card slot 1 not working and if I'm trying to install other rom it keeps rebooting from Android one page. Somebody help me ,
roshanpinto14 said:
Guys, please help, my phone was updated to pie. Since I didn't like I reverted back to Oreo. Now I'm in 8.0. I don't know what I did but I can't hear ear piece volume, or loud speaker, network problems, sim card slot 1 not working and if I'm trying to install other rom it keeps rebooting from Android one page. Somebody help me ,
Click to expand...
Click to collapse
Flash stock Pie via MiFlash. Then you can revert back to Oreo using this tutorial:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Sent from my Mi A1 using XDA Labs
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
This method..... Only downloed the twpr file and restore the partitions
I had the same problem and i solved it :good:
Have a good time
Yes. It is out finally. Honor 8 pro pie update rolling now.
Nothing yet for me..
Στάλθηκε από το DUK-L09 μου χρησιμοποιώντας Tapatalk
Its here in India. So global rollout must be right around the corner.
make sure to have backup! after I updated to 9.0.1.163, y mobile is in bootloop now! Only option I have is factory reset!
Got it here in germany this morning. Had to request it in the Hi-Care App. Just checking for an update in the settings did nothing.
Germany here. Got it on the 10th, only through HiCare.
I made a backup beforehand (recommended), but had no issue whatsoever.
It was successful for me. But no clue why is notifications bar and other stuff so big. And it is freezing a bit too. If anyone has suggestions to fix this then please let me know.
Anyone from Portugal/Spain got updated?
The last version I have is 8.0.0.369....
Security patch from 08/2018.......
Is this normal?
Sent from my DUK-L09
Everything from lockscreen to notifications bar, status bar, settings all shows huge. As if the display is set to low instead of wqhd. Same thing had happened in the last update from nougat to oreo and changing the resolution had fixed the problem but not this time. Is anyone else facing this problem?
aserraric said:
Germany here. Got it on the 10th, only through HiCare.
I made a backup beforehand (recommended), but had no issue whatsoever.
Click to expand...
Click to collapse
Hi can you give us info about the build number ?
Or better does anybody have a direct download link ?
Anyone having issue with notification content? Content not visible on notification panel when app lock applied.