Hi there
I have done the OxygenOS 2.2.0 update by using the vpn to the uk.
After the update I performed a data and cache wipe, when I started my phone it can't conect to wifi channels 12 and 13, and in my University they only use that channels, can any one help me?
Could be a bad download, especially if you're using a vpn. Did you use a vpn to get an ota alert through oos? Have you tried downloading a mirror of the zip? There's gotta be one around here somewhere on xda
http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863
try flashing the ROM from above thread as @wtoj34 suggested.
Related
Just received an official firmware update for my US P7510 via OTA:
Android version: 3.2
Build number: HTJ85B.UEKMM P7510UEKMM
For those having installed this. Does the "regular" root zip from CWM still work? I have a US 10.1 WiFi which I updated to UEKME before flashing XWKI2. I'm guessing this update will show up if I manage to return to UEKME, but I'll probably just wait for it to be posted here
I will get on this tonight
Send from my BinDroid Desire HD with Tapatalk
I just got mine OTA, too. It took quite a while to install after the download, and just as I was getting concerned, it finished. Everything seems OK. Now to go find out what's new/changed.
After updating to this firmware I cannot connect to my WLAN anymore (which was working properly before the upgrade). This is even true after doing a factory reset of the device.
Anybody else facing this issue ?
Update:
Issue is related to DHCP. After configuring a static IP it's working as expected.
Can't wait to get home from work to see if I'll get the update too. My tab is bought in the US, but is running Russian (?) XWKI2. Might have to re-flash UEKME to get the update I would think.
Just received an official firmware update for my US P7510 via OTA:
Click to expand...
Click to collapse
Thanks for the info!
I'm waiting for a cwm flashable zip. Installing an official update is way to risky if you want to keep your bootloader unlocked.
@WIFI Problem: What wifi channel are you on? If it's above 11, try something lower. It might be the regulatory domain (US= channels 1-11).
Thanks for the hint about channels but this doesn't seem to be the reason. I'm on channel 1 in the 2.4 GHz band + DHCP is also failing in the 5 GHz band
wifi probs
in the discussion of task's 3.2 rom on the development board there was some discussion of wifi problems, i think it was related to energy saving mode or something so maybe turn that off.
Joschi75 said:
After updating to this firmware I cannot connect to my WLAN anymore (which was working properly before the upgrade). This is even true after doing a factory reset of the device.
Anybody else facing this issue ?
Update:
Issue is related to DHCP. After configuring a static IP it's working as expected.
Click to expand...
Click to collapse
Same here
P7500UEKMM:
http://forum.xda-developers.com/showthread.php?t=1345995
I have same problem with my wife's gtab as well. It keep trying but never get IP from my Linksys router (N).
same here with the no wi-fi. was able to "connect" by setting ip to static and inputting the info in the fields manually, however i dont have any connectivity to the interweb... this update rocks
No update here in Canada
I've purchased my GT-P7510 from USA and root it, about as follows:
Android Version
3.1
Kernel Version
2.6.36.3
[email protected] #1
Build Number
HMJ37 P7510JPKG6
AND NO OTA UPDATE HERE IN SAUDI ARABIA...!!
Just got off a live chat with Samsung. Here is an excerpt from the chat.
Visitor: I'm noticing many complaints on some message boards now about network issues with the new update. Are there problems with 3.2?
Rex: Let me give you a feew minutes while I check the information for you.
Visitor: I am able to connect if I set the IP to static. I can't do this for every network I connect to.
Visitor: I need to be able to use DHCP
Rex: I understand your situation.
Rex: Please give me a few minutes to check the information.
Rex: Thanks for the holding.
Rex: The problem is with the version 3.2
Rex: Please perform the hard reset on your tab once.
Click to expand...
Click to collapse
It appears there is still some work for Samsung on the 3.2 version.
I'll try the Hard Reset, but I'm not holding my breath it will fix this bug.
ajshaikh said:
I've purchased my GT-P7510 from USA and root it, about as follows:
Android Version
3.1
Kernel Version
2.6.36.3
[email protected] #1
Build Number
HMJ37 P7510JPKG6
AND NO OTA UPDATE HERE IN SAUDI ARABIA...!!
Click to expand...
Click to collapse
The only OTA update for US tabs is KME and now KMM. KG6 is not a US ROM hence why you have not seen an update.
Sent from my GT-P7510 using xda premium
Same problem here. I can only connect to wifi using static ip address. I also tried the factory reset and it did not work. It is really annonying not having DHCP working.
Screen auto-rotate is also not working!!
I hope Sammy releases a fix for this soon.
The fact that Samsung can release a firmware update that breaks some very visible features is completely mind blowing to me.
Update went well via Kies
See my comments in another post:
http://forum.xda-developers.com/showthread.php?t=1346227&page=2
Hi I recently updated my Note 3 to kitkat. The update was successful but after that my signal and mobile data frequently disconnects that hasn't happened to me before the update. I haven't installed any app too after the update. Any solutions or ideas what causes the problem?
Thanks in advance.
anotherandroidowner said:
Hi I recently updated my Note 3 to kitkat. The update was successful but after that my signal and mobile data frequently disconnects that hasn't happened to me before the update. I haven't installed any app too after the update. Any solutions or ideas what causes the problem?
Thanks in advance.
Click to expand...
Click to collapse
Did you recive an OTA or you just flash a firmware?, im asking this since i got a similar problem, as a matter of fact i still got it but ive manage to fix by simple restaring the phone.
I flash a rom from rusia and i live in central america i was having problems with my 3g it was just not getting any data but if i switched to Edge if will work correctly, so i read some place that it could be a modem problem, so i downloaded and flashed a diferent rom, the problem kinda got fixed but i need to restart the phone in order to the 3g to work correctly, so u can just get another rom to try with a diferent modem.
The problem with mine is that I can recieve data but the thing is the signal disconnects by itself the starts back on again. I updated OTA.
Wifi at work constantly needs to be disconnected and reconnected. I know this was reported issue on the developer forums on Google's site but I was wondering if anyone had a work around for Cisco routers and constantly having to disconnect/connect to get the connection working.
running the 12/24 dandvh rom with Googy kernel 1.2.4.
Thanks in advance!
Hi,
I have exactly the same ROM and kernel and mine is working fine with a lot of routers. Maybe updating the baseband could help? I've found a pretty good how-to somwhere here, including all needed files (also NON-HLOS which is for wifi), if you don't know how to do this I'm goign to search the thread and post the link here
BTW, there's an update for this kernel avaliable, 1.2.5 is the newest version, maybe this could help, too?
Here you can donwload it, remember to choose the GPE 5 version
http://forum.xda-developers.com/showthread.php?t=2741181
RCxtwin said:
Hi,
I have exactly the same ROM and kernel and mine is working fine with a lot of routers. Maybe updating the baseband could help? I've found a pretty good how-to somwhere here, including all needed files (also NON-HLOS which is for wifi), if you don't know how to do this I'm goign to search the thread and post the link here
BTW, there's an update for this kernel avaliable, 1.2.5 is the newest version, maybe this could help, too?
Here you can donwload it, remember to choose the GPE 5 version
http://forum.xda-developers.com/showthread.php?t=2741181
Click to expand...
Click to collapse
Thanks,I am trying the non-hlos modem right now to see if it fixes the wifi issues! I will report back tomorrow with hopefully good news!
Well, I am at work and still the same issue .
eissan said:
Well, I am at work and still the same issue .
Click to expand...
Click to collapse
Sad to hear that:/ updating to newest rom version doesn't help, too? Did the modem flashing work? You can look it up in setting->about phone->baseband, what does this say? Should be GNK4 at the end if everything worked.
Hello everyone,
first of all a big thank you to everyone who made this possible!
I have been reading the XDA Forums since a couple of years,
also using a successfully flashed S5 (SM-G900F with lineage_klte-userdebug 9 PQ3A. 190801.002 ac382b672 ) since then.
So the Issue is that since the last Update (LOS16.0 22. Oct. 2019) the WIFi
connection breaks after 5~10 seconds after being connected.
The indicator shows a connected good signal but no Data output...
Upon disconnect and reconnect, the same. Also this appears to happen
on all WiFi networks.
I read a few threads from 2014 where almost the same behavior was
described after an official Samsung update. But no working solution
for me. I wiped the cache partition with TWRP, but no result...
So, anyone have an Idea what i should do?
Best Regards & always Upcycle!
Upcycle said:
...So the Issue is that since the last Update (LOS16.0 22. Oct. 2019) the WIFi
connection breaks after 5~10 seconds after being connected...
Click to expand...
Click to collapse
Which LineageOS version & build date did you have before & how did you update?
Updating your modem may help.
See S5 Odin Flashable Modem & Bootloader.
***
curiousrom said:
Which LineageOS version & build date did you have before & how did you update?
Updating your modem may help.
See S5 Odin Flashable Modem & Bootloader.
***
Click to expand...
Click to collapse
Hey there Curiousrom,
I guess that i had the build date 1 Week earlyer as i do weekly Updates on Monday.
Thanks for the hint with the modem update, I'll check if this helps and report.
Best regards!
Hi All,
Earlier I have uninstalled the AirTel XStream Application from the XStream using the steps provided last year in youtube. However my Airtel XStream SmartBox Firmware Upgraded to hsw4026atl-3.1.6-220211 and I can't stop or remove the XStream Application. Even the ADB Services couldn't be enabled from Developer Option. I have tried to connect the ADB shell to my Xtream SmartBox, the connection is refused by the Android TV as the services aren't working as expected. Please suggest whether we have an option to flash the Android TV with a different Android version or downgrade the software.
Note: I have performed to reset as well as wipe data/factory reset. It wasn't helpful as the old version doesn't exist in the device. Please suggest some tools to flash the device to any other Android TV Firmware using USB or LAN Cable.
@kkarthik3 I am having the same problem Even my dth cable was disconnected for the airtel XStream box
At first, the tv screen went blank, google voice assistant was working I could open the device settings and playstore too but I can't play youtube or any other application only playstore.
I tried reformating but nothing worked yet
the possible solution I think is to downgrade the firmware update for the STB looking into the internet but no luck yet.
firmware is listed here but couldn't download it
Airtel Xstream Smart Box Hsw4026atl Firmware Software [latest version] download 2023 - updated June 2023
The download Firmware Software file for Airtel Xstream Smart Box Hsw4026atl for version: Android 9, Android 11, Android 4, Android 13, Android 10, Android 8, Android 12, Android 6, Android 5, Android 7 2023 - updated June 2023
bottlestonightapp.com
if anyone has found out something, please let us know
@kkarthik3 @RJ164 same problem any solutions ??
i am tryin to change the firmware but i can't find a firmware which will work for the airtel setupbox
Did anyone find any solution to this?
rajaiah said:
Did anyone find any solution to this?
Click to expand...
Click to collapse
No man Still trying
Stung by the same bug or issue and i have multiple boxes jb'ed. So this is serious concern.
My stb is updated to latest firmware and showing me prompt to reboot device for completing the the update which i am skipping right now.
I am able to go to settings for now as i haven't restarted device and have developer options enabled. Can one prevent it getting locked again?
RJ164 said:
@kkarthik3
firmware is listed here but couldn't download it
Airtel Xstream Smart Box Hsw4026atl Firmware Software [latest version] download 2023 - updated June 2023
The download Firmware Software file for Airtel Xstream Smart Box Hsw4026atl for version: Android 9, Android 11, Android 4, Android 13, Android 10, Android 8, Android 12, Android 6, Android 5, Android 7 2023 - updated June 2023
bottlestonightapp.com
if anyone has found out something, please let us know
Click to expand...
Click to collapse
This is fake, spam or might even be fraud site. Firmwares don't come in apk files and definitely not of size in 10s of MBs.
harpy.eagle said:
This is fake, spam or might even be fraud site. Firmwares don't come in apk files and definitely not of size in 10s of MBs.
Click to expand...
Click to collapse
Yes There is no other options till now to prevent locking again ant you can't turn on usb debugging
People who are facing issue with this latest version, can you please post a video showing what exactly is the issue you are facing because my setup box is undated to the latest version but still I am able to use it for other applications without recharge.
I am not sure whether the setup box I am using will start giving issue as you guys are facing in anytime in future or issue has been bypased or taken care of by me unknowingly.
My stb is on 3.1.6 fw version as op mentioned. I was getting restart stb to finish update prompts repeatedly yesterday which i was skipping thinking it will again lock the device but my family members restarted it on their own and it's still working for now.
harpy.eagle said:
People who are facing issue with this latest version, can you please post a video showing what exactly is the issue you are facing because my setup box is undated to the latest version but still I am able to use it for other applications without recharge.
I am not sure whether the setup box I am using will start giving issue as you guys are facing in anytime in future or issue has been bypased or taken care of by me unknowingly.
My stb is on 3.1.6 few version as op mentioned. I was getting restart stb to finish update prompts repeatedly yesterday which i was skipping thinking it will again lock the device but my family members restarted it on their own and it's still working for now.
Click to expand...
Click to collapse
Btw, usb debugging is now disabled and locked for me as well after the update but other ott apps are still working fine.
harpy.eagle said:
Btw, usb debugging is now disabled and locked for me as well after the update but other ott apps are still working fine.
Click to expand...
Click to collapse
You mush have recharged
Rushi_chaganti said:
You mush have recharged
Click to expand...
Click to collapse
Obviously not. If i had recharged i wouldn't have even posted on the thread.
After all testing and finding.... i have to recharge my stb with rs 749 for 1 year of peaceful usability....... i couldn't find any other way to make it work like before with deleting of airtel app and installing custom launcher. This is the cheapest and easiest and simple solution.
Manish Dhillon said:
After all testing and finding.... i have to recharge my stb with rs 749 for 1 year of peaceful usability....... i couldn't find any other way to make it work like before with deleting of airtel app and installing custom launcher. This is the cheapest and easiest and simple solution.
Click to expand...
Click to collapse
In that case mi box or firestick might turn out to be better proposition. What do u think?
One can sell off locked xstream box to new user who want to use with recharge.
Manish Dhillon said:
After all testing and finding.... i have to recharge my stb with rs 749 for 1 year of peaceful usability....... i couldn't find any other way to make it work like before with deleting of airtel app and installing custom launcher. This is the cheapest and easiest and simple solution.
Click to expand...
Click to collapse
10 times power off in initialization phase would downgrade to previous version,
Have fun guys....
shailesh1985 said:
10 times power off in initialization phase would downgrade to previous version,
Have fun guys....
Click to expand...
Click to collapse
I have changed my tv service to Jio fiber.
Because it is cheaper than airtel
and it is providing Internet also
Airtel Xstream apk for firetv stick
Hello Was trying to get the Airtel Xstream APK sideloaded to firetv stick and it looks like none of the versions available on apk mirror works. It all says this app is not compatible with your device. If anyone has a link ( i belive it is...
forum.xda-developers.com
Can you please help where to get the xtreme apk that will run in firetv ?
shailesh1985 said:
10 times power off in initialization phase would downgrade to previous version,
Have fun guys....
Click to expand...
Click to collapse
Can this be done at any time? I mean my settop box is already upgraded many days before and still I do 10 times power off in "initialisation" message, will still down grade the firmware?