Hi.
Since the AK Kernel is not under developement anymore for the OnePlus 2, i went back to stock kernel.
But after using the gamma/color correction tool within synapse, i don´t like the screen anymore.
Is there any good tool to change color, hue, gamma, ...?
I am now on 2.2.0 and rooted with stock kernel.
Thanks a lot
The Spirit said:
Hi.
Since the AK Kernel is not under developement anymore for the OnePlus 2, i went back to stock kernel.
But after using the gamma/color correction tool within synapse, i don´t like the screen anymore.
Is there any good tool to change color, hue, gamma, ...?
I am now on 2.2.0 and rooted with stock kernel.
Thanks a lot
Click to expand...
Click to collapse
Hi
1. Wrong forum section. This is not the place for questions.
2. Kcal interface must be built into kernel in order to be able to calibrate screen. You can use boeffla-kernel once it's updated to 2.2.0, that one has these commits merged in.
Sent from my ONE A2003 using Tapatalk
Sorry, but now way to change gamma on stock kernel.... U must wait until we going to have kcal in some custom kernel. Lord Boeffla have it. But there's no source for 2.2.0 kernel yet ?
Wysłane z mojego ONE A2003 przy użyciu Tapatalka
i tried synapse with boeffla kernel on 2.1.2 but it did not work.
got the message "no uci..."
The Spirit said:
i tried synapse with boeffla kernel on 2.1.2 but it did not work.
got the message "no uci..."
Click to expand...
Click to collapse
Forget synapse. And read the instructions for boeffla-kernel properly.
You will need the boeffla config app.
http://www.boeffla-kernel.de/index.php/downloads-oneplus-phones
Sent from my ONE A2003 using Tapatalk
The Spirit said:
i tried synapse with boeffla kernel on 2.1.2 but it did not work.
got the message "no uci..."
Click to expand...
Click to collapse
Boeffla Kernel has to be configured using Boeffla Config. Only use synapse on kernels that supports synapse.
Sent from my ONE A2003 using Tapatalk
Related
Hi there,
I hope this is the correct forum as i'm currently now allowed to post directly to the Air Kernel thread as a newbie. I noticed that with the latest Air Kernel #10 for the Nexus 4 (also with Franco's Kernel) the hardware LED doesn't work any more. I reverted back to stock and it works flawlessly.
Is this still a bug in these kernels or do I have to re-enable the LED with a special tool?
Works for me, using Purity ROM.
kien said:
Works for me, using Purity ROM.
Click to expand...
Click to collapse
Which kernel do you use?
Led works for me as well on paranoidandroid with Franco kernel.
Sent from my Nexus 7 using Tapatalk 2
L3Chuck said:
Which kernel do you use?
Click to expand...
Click to collapse
Air Kernel #10
kien said:
Air Kernel #10
Click to expand...
Click to collapse
Hmm, this is strange: I now got it running to. I restored the old nandroid backup with the stock kernel and then i flashed Air kernel again. Now the LED works.
I am now using slimkat beta 1.95 with stock kernel of the rom and I want to flash the ak kernel v.305 on my phone.
Can I flash it directly?
BTW, how does this kernel do in battery life and what app can I use to adjust the performance？
Thanks...
BILYYXLTF said:
I am now using slimkat beta 1.95 with stock kernel of the rom and I want to flash the ak kernel v.305 on my phone.
Can I flash it directly?
BTW, how does this kernel do in battery life and what app can I use to adjust the performance？
Thanks...
Click to expand...
Click to collapse
Yes, you can flash it directly.
Thanks, already done~ I am now on the 309KXP version
abaaaabbbb63 said:
Yes, you can flash it directly.
Click to expand...
Click to collapse
And I am using the trickster Mod ,I fond a problem that I can't lock the min frequency to 162HZ or even 384hz, it will jump back to 912Hz automatically. Howver, the system monitor app shows that my cpu was working on 384-1512Hz.
Do you know how to solve this pro?
BTW, I have used ak kernel for almost 1 day and I think ak kernel makes the battery drain faster than the slim stock kernel....kind of upset:crying:
Deception kernel for cm based roms
Check this out
http://www.darksideteam.com/forums/98-Rom-s-y-Desarrollo-del-Moto-G-3G-(Falcon)(if u want to report bugs or talk to developer refer here)
Or
http://www.htcmania.com/showthread.php?t=880869(download it from here from google drive link)
Recommended app-synapse (https://play.google.com/store/apps/details?id=com.af.synapse)
That's the best kernel I've found until now.
Hope they get Asop version n I'll try
just tried with my xt1033...
seems not function normally....the process.phone keep forced closing...
xt1033 might not be supported at this moment?(i can't read Spanish)
ivanlau said:
just tried with my xt1033...
seems not function normally....the process.phone keep forced closing...
xt1033 might not be supported at this moment?(i can't read Spanish)
Click to expand...
Click to collapse
Do a clean install
English description is there in the link scroll down a little
This works with MultiRom?
Decepticon kernel for cm11 based rom released
http://www.darksideteam.com/Tema-KE...28f-actualizacion-continua?pid=32159#pid32159
where is the download link ？
Tracy James said:
where is the download link ？
Click to expand...
Click to collapse
Go in htcmania link u will see there Google drive link click on that link
flash this kernel decepticon_kernel_rev.1.v.0.29f_aosp-signed.zip on Spirit 1.5 result is wifi can't get IP Address.
flash this kernel decepticon kernel rev1.v.0.28f(1).zip on Spirit 1.5 result is wifi can not work/ON.
krupuk said:
flash this kernel decepticon_kernel_rev.1.v.0.29f_aosp-signed.zip on Spirit 1.5 result is wifi can't get IP Address.
flash this kernel decepticon kernel rev1.v.0.28f(1).zip on Spirit 1.5 result is wifi can not work/ON.
Click to expand...
Click to collapse
U need to manually write ip address
Go to static ip and change the ip address and then press connect
what is the correct version for 4.4.3. stock?
does it feature deep sleep s2w and dt2w with pocket mode?
I see that there is a bug in gpu overclock. After 450mhz there is 50mhz in fauxapp. Maybe it have to be 500mhz
anyone have some reccommended settings? it's bettere faux123 or synapse to set it?
fer2503 said:
anyone have some reccommended settings? it's bettere faux123 or synapse to set it?
Click to expand...
Click to collapse
I think faux 123 app is the best for kernel tweaking!
But u can try trickster too!
Since I can't post yet in development discussions I will ask here.
I'm using faux kernel with his app and sometimes I'm having camera problem. I'm using his recommended settings with 384 diskcache, by increasing this like to 512 will I resolve my problem?
Thanks
Inviato dal mio XT1032
Hi, Im Angua, Elitemovil´s beta and the creator of his jobs threads. Elitemovil is the developer of decepticon kernel for peregrine and falcon. We recommend to use Synapse for kernel configuration. Is importan take a look to the changelog to see the options that kernel has because there are a lot and continually changing. If you need suport we are at Darksideteam forum, thanks all that use this kernel
Angua 666 said:
Hi, Im Angua, Elitemovil´s beta and the creator of his jobs threads. Elitemovil is the developer of decepticon kernel for peregrine and falcon. We recommend to use Synapse for kernel configuration. Is importan take a look to the changelog to see the options that kernel has because there are a lot and continually changing. If you need suport we are at Darksideteam forum, thanks all that use this kernel
Click to expand...
Click to collapse
Hi, i have random reboot since rev2 0.9 (now i'm on 1.1) i set 96mhz-1400mhz intelliactive, hotplug, intellitermal for cpu and 450mhz for gpu with msm-adreno-tz. Any idea about?
fer2503 said:
Hi, i have random reboot since rev2 0.9 (now i'm on 1.1) i set 96mhz-1400mhz intelliactive, hotplug, intellitermal for cpu and 450mhz for gpu with msm-adreno-tz. Any idea about?
Click to expand...
Click to collapse
I respond you in darkside, you posted there too. I see faster your questions in darkside forum because tapatalk notice to me [emoji6]
This thread is created for every Z user using custom kernels to share their gamma settings so that some beginners or users could benefit from it. Ideas and discussions about the Z's screen can be discussed and shared here as well. =)
Faux123 Kernel Enhancement Pro is recommended to tweak gamma control. (Only with kernels that support gamma control)
Google Play Link
Here are my settings.
Color temp: R-248 G-252 B-255
Gamma: R-130 G-135 B-140
Hello, what does it do? Does it make colors more saturated like bravia engine in custom way or does it even improve contrast? Is it possible to compare these settings with stock one?
marek.ns said:
Hello, what does it do? Does it make colors more saturated like bravia engine in custom way or does it even improve contrast? Is it possible to compare these settings with stock one?
Click to expand...
Click to collapse
It does accordingly to your configuration but there is definitely a significant change. Just make sure you unlocked your bootloader before flashing any custom kernels. You can start configurating bit by bit by referring to my values.
Which custom kernel do you recommend? Thanks.
marek.ns said:
Which custom kernel do you recommend? Thanks.
Click to expand...
Click to collapse
You have two options for stock lollipop rom.
Zombie Kernel & Lightning Kernel . But I can't do a recommendation as I'm using AOSP based roms. =)
Which aosp ROM you using?
zakitheracer said:
Which aosp ROM you using?
Click to expand...
Click to collapse
I'm using this Tesla ROM, extremely recommended. :good:
Is there any way to do this with rooted stock 5.1.1 rom? Doing research atm
Repair link please
Sent from my C6603 using Tapatalk
I installed this app and do the gamma settings and work but it my phone hang and after few minuts going to hot and power off phone auto???what should i do
Sorry for bad languages
Sent from my C6603 using Tapatalk
Can anyone advise the best app to adjust settings on the 6p stock kernel? I am using kernal auditor and it seems to work ok. From the app store comments, it looks like Trickster doesn't work well with the 6p? Any feedback appreciated. Thanks in advance!
Any/all should have the same feature set more or less in the stock kernel. I prefer ElementalX and Kernel Aduiter
Kernel Auditor with Lean...
galaxys said:
Kernel Auditor with Lean...
Click to expand...
Click to collapse
He said for the stock kernel, not a custom one