Database Users

NEED HELP X8 boot freeze !!!

Hi ppl, i need help i had gingexdx v020 rom on my x8, i tryied to install minicm rom from the cryogenmod on it with the recovery tool, i did a full wipe, when the phone did the reboot it got freezed with the sonyericsson white words on the display, on this moment i cannot reboot the phone or enter the recovery tool, the only thing it does is only it does is only showing those words, can anyone help plz, thankx.

Just reinstall the stock rom with pc Companion and start it all over again
Enviado desde mi E15 usando Tapatalk

Thankx man it worked,

You should unlock bootloader and install an custom kernel with cwm in it. in that way you prevent yourself from having to install all stuff over and over. Because you can always restore an older rom.

problem with phone using clockworkmod recovery!

went to clockworkmod recovery, i went install zip and choose my custom kernel. then when i reboot my phone, it cant start up and keeps showing the lg sign on the screen until my battery wents flat out. tried it a several times but still could not start up. Plz Help!!!

Hello,
First what is your phone model and what kernel do you flashed?!
Sent from my LG-P700 using Tapatalk 2

bogdan109 said:
Hello,
First what is your phone model and what kernel do you flashed?!
Sent from my LG-P700 using Tapatalk 2
Click to expand...
Click to collapse
lg p700 and overclock kernel. wanted to make my phone faster.

blackcheckers9 said:
lg p700 and overclock kernel. wanted to make my phone faster.
Click to expand...
Click to collapse
link for kernel: http://forum.xda-developers.com/showthread.php?t=2254513

I think you need to flash the stock kernel, or format everything from Advanced on CWM to later flash a kdz
Enviado desde mi LG-E610 usando Tapatalk 4

Enter recovery and Reflash the rom you where using with the original kernel. If you cant charge the battery you can try this but will loose data on sdcard i think...
1 battery off
2 press vol down
3 connect to pc with volum down and realease after some seconds
4 flash kdz and start over.
It loop because u flahs a mod kernel on stock rom
Enviado desde mi LG-P705 usando Tapatalk 2

Prometeo88 said:
Enter recovery and Reflash the rom you where using with the original kernel. If you cant charge the battery you can try this but will loose data on sdcard i think...
1 battery off
2 press vol down
3 connect to pc with volum down and realease after some seconds
4 flash kdz and start over.
It loop because u flahs a mod kernel on stock rom
Enviado desde mi LG-P705 usando Tapatalk 2
Click to expand...
Click to collapse
how to find original kernel??

flash v20e or the rom that you are using!

blackcheckers9 said:
went to clockworkmod recovery, i went install zip and choose my custom kernel. then when i reboot my phone, it cant start up and keeps showing the lg sign on the screen until my battery wents flat out. tried it a several times but still could not start up. Plz Help!!!
Click to expand...
Click to collapse
if u install ROM V10K_00.kdz ROOTED after that u should do this:
• Wipe data / factory Reset, Wipe Cache, ADVANCED > Wipe Dalvik Cache
• Install zip from SD Card > First install: Stock_v10k_Rooted.zip > Yes, Next the WIFI Fix, and then Keyboard.
• Wipe data / factory Reset, Wipe Cache, ADVANCED > Wipe Dalvik Cache

[Q][L3][E400] SdMerge problem: can't wipe anything

Hi all,
i have a problem with sdmerge mod.
when i install a sdmerge rom, i can't wipe anything.
in recovery i see all wipe done succesfully (data, cache, dalvik), but when i reboot nothing happens: same background, same apps, same phone...
this problem seems to be related with originally branded mobile phones.
even if i install a no brand firmware and then a sdmerge rom, nothing changes: i can't wipe anything.
any ideas?

reflash other recovery for sdmerge. get recovery.img from step4

kien_vip said:
reflash other recovery for sdmerge. get recovery.img from step4
Click to expand...
Click to collapse
there isn't recovery.img file in step4, but i found it in step1, step2, and also in stockmergestep4.
anyway i don't know how to use it. can you help me, please?
i have tried to flash step1 and then wipe, but it didn't work

lomax84 said:
there isn't recovery.img file in step4, but i found it in step1, step2, and also in stockmergestep4.
anyway i don't know how to use it. can you help me, please?
i have tried to flash step1 and then wipe, but it didn't work
Click to expand...
Click to collapse
Try to flash your phone to stock using KDZ i also encounter that problems many times when i flash another ROM
maybe it will help you this guide
http://forum.xda-developers.com/showthread.php?t=2406608

Yes but i can't use kdz every timevi change rom...
Inviato dal mio HUAWEI Y300-0100 utilizzando Tapatalk

A little info for those stuck at 49% using LG Flash Tool

I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk

THANK YOU!!
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot

cambuchan said:
I registered specifically so I could post here.
I was looking for ages trying to find a fix. Always getting stuck at that 49%. Back to normal now!
Thanks alot
Click to expand...
Click to collapse
Glad it was if help for you!
Sent from my LG-D801 using Tapatalk

What fixed it for my friend was "format data," as in internal storage as well.
Thank you!

h
cheami said:
What fixed it for my friend was "format data," as in internal storage as well.
Thank you!
Click to expand...
Click to collapse
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much

harryleplusfort said:
Hi, sorry for my english , I'm french
I wanted to flash a custom rom on my LG G2 D802 .
I wanted the Paranoid Android (PA +) with 4.3 JellyBean .
So I made the
Backup
Wipe data / factory reset
Wipe cache partition
Wipe dalvik Cache
After I
Choose zip ( custom ROM ) from sd card
Then I
Reboot System Now
And turn on my laptop, I get an error message saying
[640 ] started Fastboot Mode
[ 690] udc start ()
I realized I had to flash AOSP kernel before changing to a ROM paranoid . But my kernel is blocked and so I have to go back to the stock ROM
When I did this tutorial using lg tools , flashing stops at 49% with an error message .
I also saw that I could access the recovery mod by following this link http://forum.xda-developers.com/showthread.php?t=2565904(but I saw that I could not otherwise reboot my phone after it was bricking ) and therefore flash my stock Rom which I had made the backup . But I do not know if the ROM has been saved and if it remained in my files after the Wipes.
If it is not there, is that in buying a micro USB ====> HUSB adapter, I could install a stock ROM from a USB key ? Or is there a way I can put files from my computer to my laptop which has no port micro sd?
And is what I could with my kernel "blocked " ?
Thank you very much
Click to expand...
Click to collapse
It sounds like you have access to recovery, so you can use adb to push or pull files from your phone. Your backup should still be on your phone, as long as you didn't wipe the internal storage.
I'd suggest pulling the important photos/videos/backup/files/etc from your phone to your computer, then wiping internal storage or wipe factory reset. Then hopefully it wont get stuck at 49%, as that is what I did for my friend's D801 to allow it to go back to stock 100%.

Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:

Thanks for sharing! Will be useful someday
Sent from my LG G2 using Tapatalk

Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk

quinejh said:
Posted this problem in another thread but haven't had an answer so hoping this one will help, have a vs980 with B firmware, rooted and was running cm11 Sat I installed rayglobe Rom ported to vs980 after running it for a few hours I decided to install twrp then I was gonna try phills recovery cause I was used to it, I installed freegee from the market and it ran a check and sshowed me the recoveries available for my phone, the short version is for some reason it read my phone version as the rayglobe 802 firmware and I hit install not realizing it wasn't. Reading vs980 now I have no recovery, flash tool does not work ( says wrong phone) rayglobe runs perfect but all maps dealong with root sees a 802 phone. Anyone have a idea how to fix this?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Edit your build.prop to the correct device and install the correct recovery
Sent from my LG-D802 using Tapatalk

No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk

quinejh said:
No clue how to do that can u use Rom manager app to do that?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Search is your friend, any app that can edit the build prop should work, please make a backup of your build prop. if you get it wrong your device will not boot.

Ok I found a thread on here about how to use file explorer to change the build prop it says there r 2 entries I need to change but my question is do I change it from d802 to vs980 or vs980b?
Sent from my LG-D802 using Tapatalk

leomd333 said:
Exactly what i keep telling people with the same issue, Just do a full wipe in cwm/twrp before restoring to stock. the problem is allot of them can't get into recovery :silly:
Click to expand...
Click to collapse
Well I could get into recovery but it did not fix the problem.

Please explain!
bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have same problem with my F320L. I will try your method but please explain bit more that how should i do?
In twrp, first hard reset and then do full wipe (all wipe except internal memory and do not format any thing) or describe the way please?
Thanks!

bri315317 said:
I just want to share my experience after a bad flash and no way to recover.
I was still able to get to TWRP. I had flashed a Rom and it went bad. Long story short. No Loki causing boot into fastboot screen.
Tried using flash tools to restore stock with kdz. No good kept stopping at 49% because it was not the expected firmware.
The fix.
Wipe system in recovery then try again. With system wiped. The firmware matches and installs as expected.
Just wanted to share my experience. Maybe it will help someone else with the same problem.
Brian
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
When i go to recovery mode i only have function Factory reset...
Can you help me please ?

[Q] please any one can help me phone model (e610)

i have installed custom recovery and cm10 after 1 month i wiped cache partition but error in recovery cant mount cache partition ......................... etc
i tried to wipe all data and factory reset but error in recovery , i have tried kdz flash tool after it finish flashing phone restart but nothing logo of cm 10 appear and bootloop please help

hisham_karm said:
i have installed custom recovery and cm10 after 1 month i wiped cache partition but error in recovery cant mount cache partition ......................... etc
i tried to wipe all data and factory reset but error in recovery , i have tried kdz flash tool after it finish flashing phone restart but nothing logo of cm 10 appear and bootloop please help
Click to expand...
Click to collapse
Please be more specific, what kdz did you flash? What frameware file did you flash via kdz?
what was the message on your pc when you flashed, do you use windows or Linux based pc? Were you in download mode when you flashed kdz?
Sent from my LG-P705 using XDA Free mobile app

help my phone stuck in bootloop
Nesh89 said:
Please be more specific, what kdz did you flash? What frameware file did you flash via kdz?
what was the message on your pc when you flashed, do you use windows or Linux based pc? Were you in download mode when you flashed kdz?
Sent from my LG-P705 using XDA Free mobile app
Click to expand...
Click to collapse
i flashed V20A_00.kdz i forget the msg that appear its look like counter ....param.. somthing like that after it finish reboot and bootloop (old rom cm10) not accept flash i have sent phone to technical try with box but nothing i use linux based pc and flash rom from vm windows 8.1 32 bit please help me

hisham_karm said:
i flashed V20A_00.kdz i forget the msg that appear its look like counter ....param.. somthing like that after it finish reboot and bootloop (old rom cm10) not accept flash i have sent phone to technical try with box but nothing i use linux based pc and flash rom from vm windows 8.1 32 bit please help me
Click to expand...
Click to collapse
I remember that on my L3,while playing a little with it,i had had some problems,and after flashing my Firmware thru KDZ i had a never ending bootloop.The solution i found was to do a factory reset by pressing volume up and down while phone was booting.After that the bootloop ended and the official firmware booted.
Inviato dal mio LG-E400 con Tapatalk 2

giaki3003 said:
I remember that on my L3,while playing a little with it,i had had some problems,and after flashing my Firmware thru KDZ i had a never ending bootloop.The solution i found was to do a factory reset by pressing volume up and down while phone was booting.After that the bootloop ended and the official firmware booted.
Inviato dal mio LG-E400 con Tapatalk 2
Click to expand...
Click to collapse
yeah i had the same problem and did a factory reset to.
worked just fine
Sent from my LG-P700 using XDA Free mobile app

giaki3003 said:
I remember that on my L3,while playing a little with it,i had had some problems,and after flashing my Firmware thru KDZ i had a never ending bootloop.The solution i found was to do a factory reset by pressing volume up and down while phone was booting.After that the bootloop ended and the official firmware booted.
Inviato dal mio LG-E400 con Tapatalk 2
Click to expand...
Click to collapse
it reboot cm10 logo appear but never start up and recovery cwm give me errors :crying:

hisham_karm said:
it reboot cm10 logo appear but never start up and recovery cwm give me errors :crying:
Click to expand...
Click to collapse
Here is a windows video tutorial on how to properly use kdz, i use a windows pc so im not sure how to fix any errors.
http://m.youtube.com/watch?v=8DcEfvEsbD8
But if you get an error on windows you need to re install the original lg drivers for e610 then go to command prompt and system and to modem then disable lg mobile modem.
Reboot your pc and then run windows enabler, and start kdz.
Again idk how to do this on linux but try to folow the video tutorial and see if it works.
Sent from my LG-P700 using XDA Free mobile app

follow this exactly and step by step!
http://forum.xda-developers.com/showthread.php?t=2405357