EDIT: NVM it was the Reactivation Lock.
--
Hello;
I recently updated my L720T to "L720TVPUCOH1_L720TSPTCOH1_L720TVPUCOH1_HOME.tar.md5" and now I can't flash a custom recovery
I put the phone in Download Mode and this shows in the topleft:
Code:
[COLOR="Red"]ODIN MODE[/COLOR]
PRODUCT NAME: SPH-L720T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Reactivation Lock: ON
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
[COLOR="Blue"]SECURE DOWNLOAD: ENABLE[/COLOR]
[COLOR="SlateGray"]WRITE PROTECTION: Enable
eMMC BURST MODE enabled[/COLOR]
Since the Stagefright update I can't root or flash anything....
Related
Sorry for English. I tried installing the 4.4 rom and cwm kitkat, but since then my phone does not start anymore. "firmware upgrade encountered an issue. please select recovery mode in kies and try again."
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
lipeandrade77 said:
Sorry for English. I tried installing the 4.4 rom and cwm kitkat, but since then my phone does not start anymore. "firmware upgrade encountered an issue. please select recovery mode in kies and try again."
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
Click to expand...
Click to collapse
hi mate, try to pull your battery for 1 minute and put the battery back and turn it on, if the problem still persist then Hold and Press power+Volume down in order to reach Download mode and reflash the stock rom.
WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:
When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting
Try turning of your reactivation lock.
Reactivation lock would be my guess. It stops a lot of people until they turn it off.
Good evening I have a Galaxy s4 Model # SGH-M919 Version. 4.4.4 Build Ver. 2.7-jflte for witch I tried to install a custom ROM bcse the one it had was acting up. (I recently got it from a friend.) I am able to boot into Recovery mode and have done data/factory rest and wiped cache partition and have flashed ROM but when it reboots system the Android Logo comes up and reads Downloading...Do not turn off target!!
Product name: SGH-M919
Current binary: Custom
System Status: custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-Config-LSB: 0x30
Write protection: Enabled
eMMC Burst mode: Enabled
***Rooted
Any suggestions would be greatly appreciated. Thank you.
It says:
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900S
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X1 4
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START
How it happened:I just rooted my phone so i can install a rom on my sm-n900s but i didnt realise that it was for an sm-n900.I flashed it on my phone with flashify and now all i can do is go to my custom recovery TWRP to wipe everything but still to no avail.I really do not know what to do.PLS HELP :crying::crying::crying::crying::crying:
Look for a stock rom on sammobile.com. If you find it, flash it via Odin.
Btw, no need to root before installing a custom rom or recovery.
OMG MY PHONE WORKED.I used a stock rom and it worked although it booted up very slow.THANK YOU SO MUCH.
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900S
CURRENT BINARY:SAMSUNG OFFICIAL
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X1 4
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900L
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START.
please help
yes bro
saiful aslam said:
Could not do normal boot.
ODIN MODE
PRODUCT NAME:SM-N900L
CURRENT BINARY:CUSTOM
SYSTEM STATUS:CUSTOM
REACTIVATION LOCKFF
KNOW WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE CSB
RP SWREV: S2,T2,A2,A4,P2
SECURE DOWNLOAD:ENABLE
UDC START.
please help
Click to expand...
Click to collapse
www.samsony.com
enter this link go go go
Please help me! My phone stays in download mode with the following messages appearing on screen:
Could not do a normal boot.
Odin Mode.
Product Mode: SM-G900F
Current Binary: Custom
System Status: Custom
Reactivation Lock: Off
Knox Warranty Void: 0x1(4)
Secure Boot: Enable
Ap SWREV: S1,T1,R1,A1, P1
Secure Download: Enable
UDC START
Flash a stock ROM with ODIN
If your first thought after a "brick" isn't "where did I store the tar for my phone?" you should probably read on how to use Odin to repair your phone and not flash things on it again...