I have 2 Galaxy S4 i9505 phones.
Phone 1. Bought as used phone on Ebay and was previously locked to the 'Three' network, I had it unlocked by 'Three'. This phone has always, and still does work without problem with my EE 4G (pay monthly) sim. The only remarkable thing about this phone is that it failed/froze/bricked whilst installing the Lollipop upgrade. It was repaired - new boards - under warranty in April 2015.
Phone 2 was also bought as used on Ebay. This phone had been used on O2 network. I discovered that it had never been locked to any network. I bought a pay monthly 30 day rolling contract thinking that it had been locked to O2. When I put my EE 4G sim in I got the message 'no sim, insert sim'. Baffled. The only thing I thought could be the problem was the sim itself, EE gave me a new sim. The only physical difference this sim had was that it had the Nano option. When I put this sim in phone 1 it worked perfectly, I put it into phone 2 and it worked! I needed to put the sim back into phone 1 to set it up to transfer data. When I put it back into phone 2 the message 'invalid sim' came up and that is where things stand.
As I have two phones I was hoping someone could guide me through the necessary steps to find out where the problem lies by comparing the two, and hopefully find a solution. I have read another thread from tomedwards93 posted in April 2015 and see no solution was found by him so maybe this could help him too.
Can someone please help?
I didn't understand a single of what is written,the description is long and read this thread twice,still can't a understand this thread
Sent from my GT-I9505 using Tapatalk
Grimble1950 said:
I have 2 Galaxy S4 i9505 phones.
Phone 1. Bought as used phone on Ebay and was previously locked to the 'Three' network, I had it unlocked by 'Three'. This phone has always, and still does work without problem with my EE 4G (pay monthly) sim. The only remarkable thing about this phone is that it failed/froze/bricked whilst installing the Lollipop upgrade. It was repaired - new boards - under warranty in April 2015.
Phone 2 was also bought as used on Ebay. This phone had been used on O2 network. I discovered that it had never been locked to any network. I bought a pay monthly 30 day rolling contract thinking that it had been locked to O2. When I put my EE 4G sim in I got the message 'no sim, insert sim'. Baffled. The only thing I thought could be the problem was the sim itself, EE gave me a new sim. The only physical difference this sim had was that it had the Nano option. When I put this sim in phone 1 it worked perfectly, I put it into phone 2 and it worked! I needed to put the sim back into phone 1 to set it up to transfer data. When I put it back into phone 2 the message 'invalid sim' came up and that is where things stand.
As I have two phones I was hoping someone could guide me through the necessary steps to find out where the problem lies by comparing the two, and hopefully find a solution. I have read another thread from tomedwards93 posted in April 2015 and see no solution was found by him so maybe this could help him too.
Can someone please help?
Click to expand...
Click to collapse
It it worked and now it doesn't then replace the sim slot on phone 2.
Lennyz1988 said:
It it worked and now it doesn't then replace the sim slot on phone 2.
Click to expand...
Click to collapse
I've replaced the sim card slot and done a factory reset, it worked for about half an hour then the 'No sim ' message returned. It still works with a PAYG '3 network' sim, with intermittent 'sim removed restart phone' message I no longer have the O2 account.
I have another fully functioning S4. Can anyone guide me through comparing the Android settings on the 2 phones.
I've never attempted either flashing or rooting and don't understand how to go about doing this.
Just to say thanks for the suggestions, the phone has now corrupted my SD card and I've had enough, I'm defeated. I'll keep this phone as a Sonos controller and go to Lumia 950 on Win phone 10 when it arrives.:good:
Sim not detected
I have a samsung S4 i 9505 and I often receive a message "insert cart sim". After rebooting it works normally
Related
Hi,
I just bought an MDA Pro direct from T-Mobile's website and it was delivered today. Unfortunately, while the PDA side of things works perfectly, it won't connect to T-Mobile at all.
On the 'T-Mobile' start up screen it displays the text 'No GSM' above what I think must be version information.
It reports 'no service' in the phone status bubble, and SIM Manager says: "Only emergency service calls can be made without a PIN" When I enter the PIN I was given, nothing happens. I think it goes into 'change PIN mode' because then I can put two more 4-digit numbers in (it doesn't matter which!) and then it says "Unknown PIN Status. Unknown PIN Error"
Unfortunately it isn't just a SIM problem as the SIM works in my O2 P800.
I've spoken with T-Mobile and they want to swap the handset, which would be fine if they had any in stock! I'm wondering if anyone here had any advice on ways I could try fixing this short of waiting for them to get in touch and tell me they have another handset I can try.
Any suggestions would be much appreciated!
Hi,
what is your local provider ? Is it T-Mobile, Vodafone, E-plus or O2 ?
The mda pro only works with a t-mobile sim !
- Superbowl
Try to clean the sim before putting it back in the MDA Pro,
Generally works for me!
i had the same problem with my jasjar here is Australia......my sim works on any other pda and phones but not the jasjar.....apparently the sim that i have or some of the new sims have a little higher voltage than normal.......and the jasjar dont like it.....so what i did was replace the sim with another one and that worked......al they had to do was port my number to the new sim......but before it did that tried to put the sim in first and it started to look for a network so i knew this was gonna work......becoz before when i put my old sim in it just says invalid sim or no sim........so try replacing ur sim with another one......perhaps try and get an old sim maybe the sim has some in stock.....i bet ya that will wrok....good luck
Thanks guys ... I'm trying to find an older T-Mobile SIM to try. It's just frustrating! I've tried giving the SIM a wipe, to no avail. If it is that the SIM is slightly incompatible, T-Mobile sending out another unit won't really help, right?
How annoying!
If anyone else has any great ideas I'd love to hear them!
try using someone elses sim and put it in the device and give it a try to check if its definitely the unit and not the sim......when i rang the tech support for optus thats what i was advised.....and they were right....sim voltage was the problem......anyways try getting another sim.
Contact customer services.
The problem sounds like you SIM is too old.
They should ask for your SIM serial number, if its too old they'll offer to send you a new SIM or something else to make it work straight away??? :wink:
The MDA PRO as its a 3G type phone with WCDMA it needs a diffrent sim card that is usaly known as a 3V USIM.
Its the same on Three in the UK, the sims from their phones will only work in 3G phones not standard GSM ones and vica-versa.
Old SIMs (from about 5 years ago) are rated at 5 volts. Newer ones are 3 volts (not just for 3G). Trust me, I work for a certain mobile phone company who sponser West Brom. ;-)
The problem will be fixed in a future software upgrade. But for now you need a new SIM or your phone unlocked.
Trouble is, this *is* a new SIM... I'm moving back to the 'hardware fault' diagnosis I think.
I went to a friendly carphone warehouse shop in Oxford and tried a new (and definately working) T-Mobile PAYG SIM and that gave exactly the same error.
Maybe T-Mobile need to send me a 3G SIM. I guess I'm probably just going to have to wait until they can send me a new handset to see what happens.
Ho hum!
There's no such thing as a 3G SIM. The 3G gigery pokery happens on the phone. There is no need for a different SIM. The MDA Pro has a problem with SIMs with certain serial numbers (Don't know which coz I'm not at work). You need either a SIM that the phone likes or your phone unlocked. Call customer services if you still have your phone.
Had the same problem allready twice in 2 weeks.
One time a soft reset made the device working again - another time I had to take out the sim card and put it in again, then it worked. But all email accounts were gone and had to be installed again.
Chris
Slave1 said:
There's no such thing as a 3G SIM. The 3G gigery pokery happens on the phone. There is no need for a different SIM. The MDA Pro has a problem with SIMs with certain serial numbers (Don't know which coz I'm not at work). You need either a SIM that the phone likes or your phone unlocked. Call customer services if you still have your phone.
Click to expand...
Click to collapse
Hi, thanks for that reply... it seems very useful! If you could post/pm me the numbers of those SIMs that the MDA Pro is unlikely to like I'd really appreciate it... customer services aren't striking me as very helpful (and certainly not knowledgable) and I can tell that if I call them they're still going to say: Wait until we have another handset in stock and we'll see what happens then. Which doesn't help me much as who knows when that will be?
Thanks!
Any SIM serial not starting with 06 or 07 will be affected by the issue.
eg 90043575, the serial starts with 04.
This will be fixed with a software upgrade in the future, in the mean time you either need new SIM or you handset unlocked. For either call customer services.
I got my MDA Pro a few days ago also, had the same problem as you, basically the handset is network locked, not sure how they managed to lock all UK network, basically give Tmob a call and make sure your stay on the line until they provide with an unlock code, i got mine, now my old sim works and my handset is unlocked
I got my MDA Pro a few days ago also, had the same problem as you, basically the handset is network locked, not sure how they managed to lock all UK network, basically give Tmob a call and make sure your stay on the line until they provide with an unlock code, i got mine, now my old sim works and my handset is unlocked
i had the same problem with my ASUS P535 (here is France) with new SIM card.
seen from :http://vip.asus.com/forum/view.aspx?id=20070818011855796&board_id=6&model=P535&page=1&SLanguage=en-us
Thanks.
I had the same problem BUT-
I had the same problem but i had been using the sim card successfully with the exec for a year, after a hard reset it doesnt recognise the sim. will a ROM upgrade fix it or is it a hardware failiure?
My solution
lauriewsmith said:
I had the same problem but i had been using the sim card successfully with the exec for a year, after a hard reset it doesnt recognise the sim. will a ROM upgrade fix it or is it a hardware failiure?
Click to expand...
Click to collapse
I had this happening to me just last week with a card that works all the time. Then followed that I had no sound coming off speakers or bluetooth. In my case it was a third party software problem. Don't ask me which as I install and uninstall too many applications and my Uni gets in a tangle sometimes. A soft reset instantly (in terms!) restored phone activities and sound, so I recommend a reset if you haven't tried it already. Maybe you will need more than one.
I am thinking of selling my hero for round £150 because i can just not sort out the problem it has so maybe some1 with abit more knowledge will be able to sort it. It all works fine apart from the problem with the sim card which is for some reason it does not register any sim cards. The phone is unlocked and i was using a 3 sim card in for about 2 months but then all of a sudden i lost connection and then i could not reconnect with any sim card =/ i have tried different firmwares and radios but nothing seems to help. It certainly isn't barred i know that so i really duno what is up with it but would be a bargin for someone who does know. P/M if your interested
It ssems like phone has been blocked.Did you buy it from previous user? Contact him/her , or the branded supplier with imei number for their explanation.
no it use to be on contract but had a problem and came off but it hadn't been blocked by them i was using it for a while after i had come off use to work fine then it just did this. I have heard there are problems with 3 sim cards sometimes thow so wondering if it was the sim cause other sims just get stuck on the registering bit like the sim unlock hasn't worked
Just curious, but why haven't you contacted whoever you bought the phone off?
Definitely sounds to me like the handset has been barred. If you bought it as part of a contract, but then cancelled the contract early, well it makes sense for the operator to bar the handset if you didn't send it back.
Quick call to 3 (assuming that's who you bought it from) should give you an answer.
no its a tmobile i shall ring them tomorrow see what they say
Wavesecure in ROM, allowing to lock / locate / wipe your device remotely in the event of loss and be notified if the SIM is changed.
that doesn't really solve none working sims though does it ?
iv just paid for an imei check and just waiting for the result now
this phone is blocked by tmobile but not by other networks that is why it registers on tmobile but wont make calls or texts so am wondering if its something to do with the unlock code iv put in =/
Hello all, I bought a used HD2 off CL (USA), hoping to unlock it (if locked) and use it with my ATT prepaid sim.
Outwardly, the phone looks fine and everything about it works quite nicely, EXCEPT that when I insert my SIM card and start the phone, it shows me an exclamation mark on the antenna icon. When I disable all wireless connections and then re-enable it, the icon now changes to the SIM card icon with an 'x' next to it, and I am shown a screen with a keypad and the following message: 'The SIM card is missing. You can still make emergency calls if your service provider supports it.'
Thinking it was a ROM issue, I successfully loaded the latest ROM from [showthread.php?t=789506] but it did not resolve the issue. There is no issue with the SIM because it works nicely with my AT&T Samsung a607. There are no signal strength issues either.
Please help!
Can someone please provide some insight on my situation? I hope I haven't posted in the wrong forum; if so, mods may move it to the appropriate place.
Any advice on diagnosing the issue will be appreciated; I don't even know why the phone is acting the way it is. Many thanks!
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Thanks much for the reply. Other phones usually prompt for a SIM unlock code by themselves... why doesn't this one?
Running simlock.exe from Windows does give me the message "Network is locked, please input unlock code". Before I buy the code, I want to make sure that there's nothing physically wrong with the phone. It should give me at least *some* sign that my SIM is being recognized, but rejected due to network-locking, no?
Thanks again!
See thats the thing. With a foreign SIM card in the device, IF LOCKED, simlock.exe should run automatically on startup and ask for the code....so honestly I do not know if your device is messed up somehow, or if its just being wonky for the sake of being wonky. Perhaps you might want to flash a new Radio ROM and see if it then recognizes your SIM. BE SURE to NOT flash one with .51 in its name.
Thanks again. Can you point to a thread with detailed instructions for flashing a new radio ROM for my device? I found many threads while searching and I am confused. I don't want to choose the wrong instructions and brick this device; I haven't done anything of this sort before.
Look at the top of these forums for a stickie by Snarksneeze that will teach you everything you need to know.
Hi again... I don't have a spare 8GB MicroSD card lying around. Is there any way I can do this flashing over USB? I did read that there's a risk associated with flashing over USB (cable yanks, power loss, etc.) but I did flash the newest ROM without any issue, and hopefully I can do the same for the new Radio ROM.
The Radio version shown in the 'About Phone' section is 2.14.50.04, btw.
You can use your 16GB that came with the phone, or any other one for that matter. That requirement is more of a recomendation really. I have flashed with my stock 16GB many times. And yes, you can do it via USB aswell.
OK, so I have more information about the problem. I got the phone unlocked (I heartily recommend 'fastunlocker' on eBay) thinking that it would solve the issue... but it didn't. But, on a lark, I tried my friend's post-paid T-Mobile SIM in the HD2 and it worked! My AT&T pre-paid SIM does not... can this be a problem? The damn thing works nicely in other (unlocked) phones.
Is anyone else successfully using a AT&T GoPhone (prepaid) SIM on a TMOUS HTC HD2?
It may very well be the problem then. I have heard that some phones are incompatible with pre-paid SIMs.
God, that would suck donkeyballs. Can someone confirm that an unlocked TMOUS HD2 does not work with AT&T GoPhone prepaid SIMs?
had this same exact issue and realized that one of the pins in the sim card reader was stuck in the down position. I poked it with a small screwdriver and it popped back into place. works like a charm now.
Thanks for the reply. Are you sure this is the issue? As I mentioned in a previous post in this thread, my friend's T-Mobile SIM works nicely with the phone.
EDIT: Also, are you using it with an AT&T GoPhone SIM?
Bump... anyone?
Final bump: maybe I am SOL. :'(
Is anyone successfully using a TMOUS HD2 with an AT&T Prepaid (GoPhone) SIM?
Give it some time. Sometimes threads at XDA stay dormant for months and then suddenly BAM! a breakthrough happens.
I would say its your sim. How old is it?
I had the exact same problem. I bought a HD2 off cl and put my sim in and got the no sim message and exclamation point. I was using a sim from the voicesteam days but guess what it worked just fine in the Nexus one I had just gotten so I figured it had to be the phone. I finally used a friends sim and it worked fine. So I would turn the phone off in settings then slip his sim out with the battery still in and put my sim in and turn the phone back on. Guess what, it would work for about 10 min then it would suddenly go back to no sim message. So I went and got a new sim from T-Mobile and walla works like a charm. So try what I did and if you end up with the same problem try a new sim from AT&T. I don't know what is different about the HD2 but there something about the older sims that it doesn't like.
Hope that helps!
Hey... thanks for ther reply! My SIM is brand new (about two weeks old). I will however go to the AT&T store and get it replaced to see if it fixes the problem. Thanks again, I appreciate it.
Dear look my problem...
ashasaur said:
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Click to expand...
Click to collapse
-----------
I have a HTC HD2 working excellent with my card. Some day i received message : card is missing ....like you.
But restarting 2-3 times all ok. In a week the same problem again here.
Now i cant make a call. The same card in another hd2 works good. Any other card in MINE phone is missing...
Please help me.
Many thanks
[email protected]
Hey,
So we heard reports that the 8GB DVP models sold in the Microsoft Store on launch day appeared to work with AT&T SIM cards, meaning that they were SIM unlocked. Can anyone confirm that? It raises a number of questions:
1. Are the replacement units that fixed the wifi/SIM issues still unlocked?
2. Do these unlocked units support Auto Device Config (ADC)? That is, what does the Cellular settings screen look like - can you see the APN? Does it automatically change when you put in a different SIM? Can you see the hard-coded T-Mobile default APN?
I've got a 16GB locked DVP from Dell, but would consider swapping it for an 8GB from a brick-and-mortar Microsoft Store if they are indeed SIM unlocked. (Anybody in southern california interested in swapping with me?)
The first phone (Engineering Sample) was SIM unlocked. I couldn't try it on the second phone because after the first reset it gave the invalid SIM error.
Now the third phone is locked (I'm so pissed, bought it @ full price)
Ok if I can remember, when I put in the ATT sim and switched off the 3G it didn't show any "configure" screen but EDGE was working
Hope this helps
I tried to put an att sim in there but the card would not fit since the reader is on the other side of the card from tmobile.
eyan15 said:
The first phone (Engineering Sample) was SIM unlocked. I couldn't try it on the second phone because after the first reset it gave the invalid SIM error.
Now the third phone is locked (I'm so pissed, bought it @ full price)
Ok if I can remember, when I put in the ATT sim and switched off the 3G it didn't show any "configure" screen but EDGE was working
Hope this helps
Click to expand...
Click to collapse
Thanks - this makes me feel oddly better, like I haven't missed out on the chance to buy an unlocked, working device. Bummer for people who bought original units from the MS Store and then got replacements that were locked though.
enders4you said:
I tried to put an att sim in there but the card would not fit since the reader is on the other side of the card from tmobile.
Click to expand...
Click to collapse
Thanks, but I think you're mistaken. All SIM cards are the same shape, unless you're talking about Micro SIMs. I have tried an AT&T SIM in my Venue Pro.
Thats strange . . . my sims are different . . . size is the same but the shape are at different sides . . .
So, I am very ignorant regarding cellphones, so I hope someone around here can help me out. I have a rooted Samsung S4 GT-I9500 that I bought in Guatemala from Claro company. I moved to Africa to work, so for me to be able to use my phone I bought an unlock code that worked just perfectly. My phone got sim unlocked and I was able to use it for several months until recently. One night my phone ran out of battery, so I plugged it to the charger and charged it all night [turned off]. Next morning when I turned the phone on, the phone was sim locked again and my sim card was not recognizable at all. the following message appears
"PIN to unlock SIM service provider"...when I click dismiss and scroll down the upper tab it says "Invalid SIM card...Network locked SIM card inserted".....
I tried reentering the unlocking code that I previously bought but with no success. I tried factory resetting and reentering the code, also no success. I also inserted my old Claro Guatemalan Sim Card and it is also not recognized by the phone. Does anyone have any clue or suggestions about what it could be and what I can do about it? Please make the explanations "for dummies" since as I said before, I am not that good with cellphone stuff. Thanks for your help.
dollagaray said:
So, I am very ignorant regarding cellphones, so I hope someone around here can help me out. I have a rooted Samsung S4 GT-I9500 that I bought in Guatemala from Claro company. I moved to Africa to work, so for me to be able to use my phone I bought an unlock code that worked just perfectly. My phone got sim unlocked and I was able to use it for several months until recently. One night my phone ran out of battery, so I plugged it to the charger and charged it all night [turned off]. Next morning when I turned the phone on, the phone was sim locked again and my sim card was not recognizable at all. the following message appears
"PIN to unlock SIM service provider"...when I click dismiss and scroll down the upper tab it says "Invalid SIM card...Network locked SIM card inserted".....
I tried reentering the unlocking code that I previously bought but with no success. I tried factory resetting and reentering the code, also no success. I also inserted my old Claro Guatemalan Sim Card and it is also not recognized by the phone. Does anyone have any clue or suggestions about what it could be and what I can do about it? Please make the explanations "for dummies" since as I said before, I am not that good with cellphone stuff. Thanks for your help.
Click to expand...
Click to collapse
Hello dollagaray,
I´m having the exact same issue. Did you find any way of solving it? I have flashed several firmwares and modems but nothing would unlock the phone again.
Thanks in advance!
morza21
I had this issue and ended up replacing the SIM card tray.