Hi, can I connect an external hard drive which needs 5V and 1A power to nexus player? Thanks
I don't think that's recommended. You're better off plugging the hard drive in to a powered USB hub instead which is a safer method if the hard drive does not use its own power adapter.
Related
Can the galaxy tab connect/power a portable usb hard drive?
portable meaning small drives that use laptop sized hard disks and have no external power
With the 3.1 update ans the usb adapter i believe its possible. But i dont know for sure.
SGT 10.1 uplink initiative
a usb flash drive should work.. I doubt it would be able to power a hard drive though. don't most external hard drives come with their own power supply? mine did.
smaskell said:
a usb flash drive should work.. I doubt it would be able to power a hard drive though. don't most external hard drives come with their own power supply? mine did.
Click to expand...
Click to collapse
Yeah the larger ones have external power (and should work), smaller portable drives that use laptop hard disks have no external power.
My Acer Iconia was able to. I'm hoping the 10.1 can do the same.
so picture it you're using the tablet for video or music running from a memory stick via OTG and you want to be able to power/charge the device at the same time without having to remove the pen drive is there any way of achieving this?
some kind of pass through device perhaps or a usb hub of sorts?
How to power with usb-otg
I can't confirm whether this will work for the Nexus 7 but it has worked on my Triumph and Photon 4G. Go to meritline.com and look for a Pisen® Multi Purpose USB Hub, White (sorry can't post links yet.) Plug your otg into the white port and the red into any available usb power supply (be it a laptop or charger) you may want to have an extension available depending on your set-up. For me this has provided power to keep device charged as well as interface thumb drives, card readers, etc, has even powered a bus-powered external hdd with no problems.
Does the Asus Vivo Smart ME400 micro-USB port support USB devices like flash drive - keyboard - mouse - HD & CD drive? If yes, where do I get the right USB adapter for it? THANKS.
z_zk_z said:
Does the Asus Vivo Smart ME400 micro-USB port support USB devices like flash drive - keyboard - mouse - HD & CD drive? If yes, where do I get the right USB adapter for it? THANKS.
Click to expand...
Click to collapse
Use a regular OTG Micro USB to USB adapter
I've been testing my micro USB port with a micro USB to USB OTG cable I have.
Logitech G700 mouse works.
Kingston micro SD to USB adapter works.
Corsair Vengeance 2000 headphones works.
WD 500GB USB 3.0 hard drive works.
Samsung Ultraslim DVD drive does NOT work.
The Samsung DVD drive did work on the full sized USB port on my Samsung 500T tablet. But on the ME400, the light lights up once when I plug it in, but never installs the device and doesn't have any power afterwards. This is a USB powered DVD drive.
Surprised the external hard drive did work when the DVD drive failed. But it showed up fine, had some videos on it, was able to play videos from there okay.
I have another external DVD drive that is powered externally, I imagine that'll probably work fine, I'm too lazy to find it and plug it in (it's an old giant clunky beast).
Ravynmagi said:
I have another external DVD drive that is powered externally, I imagine that'll probably work fine, I'm too lazy to find it and plug it in (it's an old giant clunky beast).
Click to expand...
Click to collapse
I think the port only puts out 500ma. The DVD Drive is most likely over that. However quite a lot of modern 2.5" HDDs (your external hdd) are just below 500ma in power which is why it works.
I'll try with my Aluratek dvd writer later. It has a Y cable so may need more than 500mA.
caudex said:
I think the port only puts out 500ma. The DVD Drive is most likely over that. However quite a lot of modern 2.5" HDDs (your external hdd) are just below 500ma in power which is why it works.
Click to expand...
Click to collapse
My Samsung DVD drive is powered from a single USB cable (no y splitter for extra power). So I'm guessing the micro USB port isn't even outputting 500mA. It worked fine on the Samsung Atom tablet and I doubt that USB port was outputting more than 500mA.
Guys i have this tablet for about 3 years now and now i face a problem, the tab do not charge anymore and does nothing, not even the orange light of low battery, he does give light of charging, but no life, is this a battery problem? Even if battery is dead shouldnt give life with the charging cable and turn on?
Hey guys!
I have a Transcend StoreJet 500gb external HDD that I want to connect to my Nexus 7 (2012). Flash based usb sticks work fine, but this hard disk with the actual spinning platter doesn't. I found out that you need to "power the hard drive with a usb hub".
I don't have a usb hub, so I thought of this. Since my External HDD has a usb cable with two usb connectors, can I plug one of them into the Nexus 7 battery charger and the other one into my nexus 7 with a OTG cable?
Can I power it properly like that?
Or is it dangerous?
If I only connect it to my nexus 7 it makes beeping sounds and doesn't get detected. Not much power output on the Nexus 7....
Please help!
Thanks in advance.
You need a powered USB hub, they aren't that expensive.
Sent from my Nexus 7(2012) that has zero issues.
SlowCobra96 said:
You need a powered USB hub, they aren't that expensive.
Sent from my Nexus 7(2012) that has zero issues.
Click to expand...
Click to collapse
Is there nothing else I can do?
Cost is not the issue, I just cant buy anything right now. :good:
compgenie said:
Hey guys!
Since my External HDD has a usb cable with two usb connectors, can I plug one of them into the Nexus 7 battery charger and the other one into my nexus 7 with a OTG cable?
Can I power it properly like that?
Or is it dangerous?
Click to expand...
Click to collapse
Yes you can do that, it is not dangerous. I power my external WD Passport HD by plugging one usb connector into the pc for power and the other into the OTG usb cable. My drive won't spin unless supplied with the additional power. I have also tried it by plugging the connector into an a/c adapter instead of the pc usb port, which also worked fine.
Groid said:
Yes you can do that, it is not dangerous. I power my external WD Passport HD by plugging one usb connector into the pc for power and the other into the OTG usb cable. My drive won't spin unless supplied with the additional power. I have also tried it by plugging the connector into an a/c adapter instead of the pc usb port, which also worked fine.
Click to expand...
Click to collapse
Connecting it to a/c adapter + tab worked! :good:
Thanks!
Ps: I tried that before too. Didn't work then. Now it worked. Weird.
Hi all,
I have a similar problem with my N7 attaching a small USB powered HDD to watch HD movies stored on that drive. Thing is, when I attach the HDD on my USB OTG cable, all i hear is a repeated "clack..clack" and nothing happens, the HDD doesn´t start. So the other day I got my Nexus 5 and for fun I tried to use the SAME HDD with the same cable and same adapter on the N5 and it worked flawlessly! Starts up, Stickount mounts it and boom!
Now how can it be that one device can work with the HDD and one not? I´mm guessing it may be related to AC voltage levels, but shouldn´t the Nexus 7 be able to deliver the same or even more power to the HDD than the Nexus 5?I don´t get it....
Thanks,
Kusie
Ok guys. I've been messing around for some long time using 4.3 rom and my 2tb passport but with no luck reading (or writing from it). I was under impression that phone has to be rooted for reading only NTFS format but....this is fairy tales if you ask me. Recently I upgraded to latest kitekat available and rooted but still no access to my drive. I tried 3 usb sticks (8,16,64) with no problem using FAT format.
I used paragon, stickmount but nothing helped me to work this out. I'm also having second doubt would I have more luck with exFAT format?
Anyone had similar problems connecting 2tb drive to their Note 3? And disk is spinning I'm positive it has enough usb power.
The phone can only support up to 1tb due to power restriction.
The only way that i managed to get a WD 2Tb drive to work with my phone/tablet was to use a powerbank. The phone doesn't give enough power out to start the drive up.
You need :
- 1 powerbank (the bigger the better, as it will also charge your phone/tablet)
- 1 USB Hub + OTG cable (or an USB Hub that can be used as OTG with the phone)
- 1 male-to-male cable
- the phone
- the external HDD
Connect to the USB hub the HDD using the cable suplied with it, connect using the male-to-male cable the powerbank to the USB hub and then connect the USB hub to the phone using the OTG cable (or if you have an OTG cable with USB hub integrated then it's even better).
Now, the powerbank will give power to all devices connected to the USB hub (the HDD and the phone), so it should work OK.
After that you will need to solve the NTFS reading/writing, for that you should be able to use the app you already mentioned.
P.S. when i was playing on the Tab2 with the above configuration, I also had to put an usb stick in the USB hub. For some reason the tablet didn't detect the HDD on the hub unless there was an USB stick too (never understood why). I don't remember having the same problem with the Note3, but i didn't test extensively so your mileage may vary.
Edit : an example of OTG adapter with integrated USB hub for Note 3 : http://www.ebay.com/itm/Micro-USB3-...-TF-Samsung-Galaxy-Note-3-N9000-/171300593212
Thanks for reply verszipo I was looking at this cable, hoping this could power up the drive while phone continues to operate itself without additional power. So Is it possible to have power supplied directly over wall plug instead of power bank?
This USB hub seams like nice idea.
Theoretically connecting like you suggested should work even if I leave disk in NTFS format using tools I mentioned before?
elektroda said:
Thanks for reply verszipo I was looking at this cable, hoping this could power up the drive while phone continues to operate itself without additional power. So Is it possible to have power supplied directly over wall plug instead of power bank?
This USB hub seams like nice idea.
Theoretically connecting like you suggested should work even if I leave disk in NTFS format using tools I mentioned before?
Click to expand...
Click to collapse
If external hdd is larger than 1 TB,
Use usb "Y" cable to add external power source to connection.
Hey!
I use 1.5TB HDD with mu N3 and it is NTFS...
Why cant you use USB hub with external power supply (try to find out if it is 1A or 2A? bigger = better), and at phone install total commander with plugin USB plugin for Total Commander (no root requided!!)...
I use a 2tb wd passport. No need for external power source. I use paragon to read and write to ntfs partition. My drive gets detected within a few seconds but takes several minutes to mount the drive. Maybe you just need to wait. I know my drive is mounted when the My Files app launches by itself and shows the drive contents.
I received my Y cable hoping extra juice could solve my problems but I have no luck at all. No matter what I use I can't make my drive read. I don't have any options to choose.
Maybe I should format my drive using different allocation size unit, I never formated it and it's not 4 months old. Maybe my phone has some crappy cache leftovers so I should use cleaner? Hell I don't know what to do anymore. Usb sticks are working fine all the way.
Ok update on topic. I mange to make it work. I formated to NTFS with default allocation size, nothing special. Using paragon + total commander plugin + total commander. Works fine now WITHOUT additional power. Only downside is that mobile battery drains way too fast when you connect storage on it. It does not matter if I plug in additional supply to drive or not, draining is the same. Anyone noticed this and any workaround for this.
Thank you guys for suggestions.
I mounted my CN memory usb3.0 3tb drive with paragon in my rooted sm n9005
It mounted fine to a folder in my int SD, and i copied ober 20gb of data