Ok so the miss dropped the phone landed on it back. Now there screen is like this look at video.
https://youtu.be/m2BCxMcghUwDo Do i need a new screen i can't see any cracks to the screen at all..
I don't see a video or link.
Edit: Now it's there.
There is a link to a video i made if u watch it you can see the screen showing washed out and lines on it
If it's a G2 (description on YouTube) you might be better off asking in the G2 forum. At least for specifics, like whether replacing the screen is difficult.
I'd guess that you may need a new screen, but I'm not an expert. The first part of the video showed sort of a ring near the edge of the screen that was brighter. Is it possible that this has something to do with the screen's backlight? I'm guessing the backlight is attached to the the screen and replaced with the screen, so it probably wouldn't matter whether it's the screen itself or the backlight.
My phone was duin that after i broke the inside lcd only myn was much worse i coudnt see anything. Yepp you need a new screen mate
yes you need a new screen, buy it in ebay for $39
Related
Really need help here,
My hermes suddenly decided that visuals are no longer needed.
That means the screens stays off all the time (yes even in bootloader mode).
It works, receive calls and flashes roms but in no situation can I see anything on the screen (pitch black screen).
I've got no warranty so I took it apart and checked each cable and connector - no issues were seen. I tried changing SPL-s, RUU, Roms all worked but left my tytn with that black screen.
Did anyone see this happen or has any advice?
This sucks big time :-(
No one? Oh man, I guess it's dead then :-(
Last bump before giving up and throwing it away - please?
send it to me if your gonna throw it away : - 0
I've given up on mine as well. It has white screen though. Where do I dump this thing?
If it is out of warrenty, I would take it apart as is sounds like the hardware, check the connections to the LCD. Does the backlight still work, or if you put it in strong sunlight, can you see the LCD working?
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
what are you guys willing to sell your pdas for? Mine fell in a puddle and i need one for parts. The white screen might be fixable the first couple of times but then it dies off for good, the black screen i've never heard of.
So if you want to sell for a reasonably cheap price let me know, i can buy a new keypad online for $50. So around there would be nice!
i.a.wright said:
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
Click to expand...
Click to collapse
I just tested this on mine and actually got some results.
mines the opposite though, it will NOT work with any pressure. I left all the screws loose for that board under the buttons, and left the LCD assemble screws out on that end and it works, But if I press the keys it whites out again and won't come back until I repeat the dis-assemble/re-assemble
I had a similar problem but this was after someone dropped mine on the floor. The screen would just be white screen, while everything worked. If I pressed the bottom right of the phone it would sometimes come on and stay on for a little while but would eventually always go to white screen.
I did manage to use the phone but had use a program called Net Control which allowed me to control the phone over WIFI with the phone screen shown on the PC. Got the phone replaced in the end by the people who dropped it.
i got the flex cable and my phone still has the white screen problem....wtf///
Hi,
Recently ive repaired a HTC Universal, put it back together as best as i could.
Now when i do touch the screen with a stylus, the screen has funny colours behind it. It kind of like when you touch/ prod your Computer LCD. It only happens when theres pressure on the screen so its not really a huge problem. The touch screen is definately there cause when i tap the screen it responds (e.g i tap start and the menu pops down).
If its normal then i can take it, but if its not im complaining to the ebay seller.
This doesent happen when i put any form of pressure on my HTC magician LCD, so im curious.
Let me know what happens with your universal
Cheers,
Whitemoo.
This is not normal behaviour of any touchscreen device!!
hmmm... well i just looked at the broken lcd screen, and even though the LCD itself is shattered, the touch screen is in perfect nick.
I put pressure on the touch screen and couldnt see any of the symptoms i saw on my current LCD
You guys recon i should swap the touch screen over? either way im complaining to the sellers, DODGY.
whitemoo.
from my knowledge, im pretty sure its normal. it happens sometimes on my 9000 so yeahh....
Hi
yesterday I saw a light spot (that it's visible only with white screen) in the top-right side of the screen, under the power bottom.
it's visible only at high ° of inclination, if I look my tablet directly (90°) it isn't visible
I don't know how it's possible that, has someone info about it?
|DM| said:
Hi
yesterday I saw a light spot (that it's visible only with white screen) in the top-right side of the screen, under the power bottom.
it's visible only at high ° of inclination, if I look my tablet directly (90°) it isn't visible
I don't know how it's possible that, has someone info about it?
Click to expand...
Click to collapse
It's possible that the Digitizer might not be fully contacted at that particular point in the tab. I have seen a couple of posts about this. This is a hardware/manufacture defect more than likely, or something that happened over time and usage. Considering the location near an often used spot, this is probably true.
I would suggest if you can live with it, then just ignore it.
If it really bothers you, then you can remove the back cover of the tablet, and check for loose connection fasteners around the display/digitizer areas. But really, if you have to look really hard at certain angles, in the right light and color, then I would ignore it. Not worth the trouble.
Hi, had my defy about 12 months and it's great but tonight i dropped it and as soon as it hit the floor the noise it made i knew that something bad had happend. The glass and phone itself isn't damaged but about a third of the screen on the right has black, blue, red and white lines going in straight lines from top to bottom and also has a 45 degree line from bottom right corner all the way to where the screen is still "good". Also if i apply preasure to the damaged part the lines flicker and I can see parts of the screen that are otherwise invisible due to the lines. Does any one know if the screen is damaged beyond repair? Or do you think I could fix it in its current state? Any help provided will be most appreciated as I would be sad to see this phone go. I have attached a picture of the screen to help better undertsand.
Bill.
Change The display .Buy from the www.etradesupply.com/ they shiping very fast and product is good
ownerovadefy said:
Hi, had my defy about 12 months and it's great but tonight i dropped it and as soon as it hit the floor the noise it made i knew that something bad had happend. The glass and phone itself isn't damaged but about a third of the screen on the right has black, blue, red and white lines going in straight lines from top to bottom and also has a 45 degree line from bottom right corner all the way to where the screen is still "good". Also if i apply preasure to the damaged part the lines flicker and I can see parts of the screen that are otherwise invisible due to the lines. Does any one know if the screen is damaged beyond repair? Or do you think I could fix it in its current state? Any help provided will be most appreciated as I would be sad to see this phone go. I have attached a picture of the screen to help better undertsand.
Bill.
Click to expand...
Click to collapse
I think-cable screen. Need to disassemble and see.
Hello. Can somebody tell me what are this veretical lines on the screen? They can be seen only on artifical light or outside on a bright day, mostly when the screen is off. They look like blured like scratched, I'm not sure, even they are not problem for the screen. I bought the phone like this. Thanks.
Maybe they came from extended use of a flip cover case? See creases in the pic (Nexus 7):