Ive been running CM12 for a long time, but today I noticed I had a few missed calls and my phone hadnt rung. I rebooted the phone and it went into a boot loop. I cleared cache, but still bootlooping, dirty flashed the latest nightlie and then a full wipe - all of which resulted in the boot loop.
I restored my phone using the TOT method, but it would get to the setting up google account/wifi etc and reboot.
I used KDZ to install 30b lollipop ROM this seemed ok until reboot and then it would factory reset, optimise apps every time and be back to the setup screen.
I managed to install KK using KDZ and this seems more stable so used IOROOT and Autorec. I then flashed CM12 and GAPPS again, but it started to boot loop again.
I hadnt done anything to my phone prior to the problems - ie. no new ROMs, kernels or even apps.
Any suggestions or does it sound like something more physically wrong?
I have managed to get Cloudy G2 2.2 working without any problems except it isn't recognising my SIM. Does anyone have any thoughts or is this a dead phone?
Related
Hey there! I was updating my version of Paranoid Android and my kernel and it seemed fine at first but It yield some odd problems. I went into Clockworkmod recovery and Flashed my rom and kernel I then proceeded to wipe my cache and dalvik cache. I have done this many times before on many devices. I encountered a problem when I rebooted for the second time, I got the Android is updating apps display and I continued to get it every time I booted. The device would also randomly turn off when the screen dimmmed. I proceeded to set out and fix it. Here are the steps I took and the problems it caused.
Flashed stock rom-would not boot properly
Flash RESET kernel-I messed up and though this was a real kernel, my problems escalated from here.
Flashed stock rom and recovery.
Flashed reset kernel and then real kernel-Still had problems.
Flashed stock rom
My problems from all this accumulated somewhat and I can barely boot into fastboot. I get weird static screens and weird white noise sounds. It does not always let me boot into android and will get to the google logo 1 out of ten tries.
These is really unnerving and I have no clues whats what.
Note: I am using Faux123's kernels and his reset kernel.
Thanks a lot for any help!!!
I have scoured the internet to find someone with the same issue as me, and I haven't found enough to fix the issue, so I'm placing a plea for help here. I have installed TWRP 2.6 recovery, and I am trying to flash OmniRom 4.4.2 nightlies. Originially I was trying to flash cyanogenmod 11, but I had this same problem. It appears to be any kit kat rom that causes the problem (I haven't tried flashing stock or any non-kitkat roms, but I was running on rooted stock before I tried to flash CM11). Anyways, When I flash I am wiping dalvik, cached, system, and data. Then flashing the rom, then flashing Paranoid android gapps. It will boot the first time fine. My phone will work just fine afterwards. However, if my battery dies or I restart, I will be unable to boot back into the rom and my phone becomes a soft brick. It will just stay stuck at the galaxy s 4 logo for as long as I leave it on. I have left it on for more than 30 minutes and there are no changes. I can't have my phone being just a dead battery away from being bricked, so I am asking for your help! Anything is much appreciated!
One other side note: I had my phone just lock up on me once in the middle of it running just fine. Afterwards it turned off on its own and tried to restart, but it resulted in the same issue. I don't know if this is related or just a bug in the rom.
schmidty455 said:
I have scoured the internet to find someone with the same issue as me, and I haven't found enough to fix the issue, so I'm placing a plea for help here. I have installed TWRP 2.6 recovery, and I am trying to flash OmniRom 4.4.2 nightlies. Originially I was trying to flash cyanogenmod 11, but I had this same problem. It appears to be any kit kat rom that causes the problem (I haven't tried flashing stock or any non-kitkat roms, but I was running on rooted stock before I tried to flash CM11). Anyways, When I flash I am wiping dalvik, cached, system, and data. Then flashing the rom, then flashing Paranoid android gapps. It will boot the first time fine. My phone will work just fine afterwards. However, if my battery dies or I restart, I will be unable to boot back into the rom and my phone becomes a soft brick. It will just stay stuck at the galaxy s 4 logo for as long as I leave it on. I have left it on for more than 30 minutes and there are no changes. I can't have my phone being just a dead battery away from being bricked, so I am asking for your help! Anything is much appreciated!
One other side note: I had my phone just lock up on me once in the middle of it running just fine. Afterwards it turned off on its own and tried to restart, but it resulted in the same issue. I don't know if this is related or just a bug in the rom.
Click to expand...
Click to collapse
Omni clearly states that it is an alpha, so you mileage may vary considerably.
Sounds kernel related. Have you tried just reflashing the kernel and seeing if it'll boot after that. Or trying a different kernel?
Thanks for the reply! I actually just fixed the problem on my own. I used Odin to flash a newer version of TWRP and then flashed omni, and it looks like everything is working just fine. I read a few people saying that they were having issues flashing kit kat roms with older versions of recovery, so I figured it was worth a shot.
I have been a lurker around here for some time, but never posted. So Howdy!
I am having some troubles with my LG G2. I have loved the phone so far, and has custom TWRP recovery and rooted. Other than that the device was stock with some very minor mods (xPosed framework, etc..
I stupidly forgot that I had TWRP installed, and I chose to take the recent T Mobile OTA. The phone wouldnt boot past recovery despite a factory data reset. I flashed the stock rom (tried both D80110C and D80110G) to no avail. factory data reset again, re root, installed TWRP again, cleared cache and dalvik, and everything was fine EXCEPT the knock on feature doesnt work. Knock on works just fine, but I cannot knock to wake the device. The power button wakes the device just fine.
Anyone have any thoughts?
Also,
I was considering flashing a rom, like Gummy rom. I don't really have any hypothesis behind this, as I have already flashed the stock rom kdz twice now.
sailoholic1234 said:
Also,
I was considering flashing a rom, like Gummy rom. I don't really have any hypothesis behind this, as I have already flashed the stock rom kdz twice now.
Click to expand...
Click to collapse
Hey, is your knock on issue resolved? also try CloudyG3 rom, its realy smooth.
So this issue has persisted throughout wiping data/factory resetting. I'm really not sure what this is.
Basically what happens is that my phone will gradually get slower and slower until it freezes and then reboots. However, after it reboots, it will go into a boot loop. What I will then need to do is basically wait it out by shutting it off. Then, I wait for an hour (maybe more) before I try turning it back on again, at which point it returns to normal.
Any idea? I thought it might be a memory leak? But how would that affect rebooting? I'd like to also mention that at one point my recovery somehow disappeared as well. I managed to re-flash TWRP using Flashify, but I haven't dared going back into the recovery, because last time when I had lost my recovery, I ended up thinking that I had to wipe my phone completely (because even Download Mode wasn't working correctly).
By the way, I'm running an AT&T LG G2 d800, on the "d80010q" firmware 4.2.2. I'm rooted, with Xposed modules running, as well as the camera mod flashed. No other modifications have been made except for buildprop and systctl (kernel) changes through android tuner.
Same issue
Hello,
I am having this exact same issue. Did you ever find a fix for this? I have been searching for hours. I have tried numerous things, flashing back to stock with lg flash tool, installing different roms, it happens on all roms.
Thanks
So tl;dr version - i was using my tablet, saw an update to magisk, installed it, now it boots to black screen while running sambones rom
[SM-P580] [BQK1] SaMBoNeS
TWRP 3.2.3.0 --> 3.3.1.0
longer story:
i was trying to get a game to run, it wasnt...and realized it has been a while for a restart, so i checked to see if anything needs to be updated and saw magisk needed an update. i didnt note what version it was before but it was a version or two earlier than what it was trying to install.
rebooted to blackscreen no samsung logo
have tried restarting a dozen times, booted to TWRP, tried to force normal system boot through the UI, nothing.
I tried installing a new kernal [SiriKernel], it made it to the samsung logo, waited 15 - 20 minutes and it never made it past. restored a backup using TWRP
updated TWRP to 3.3.1.0, still no luck.
i had this problem a long time ago, and cannot figure out how i fixed it....it may have fixed itself but it isnt this time. any advice would be appreciated. I am trying to avoid wiping and starting again if at all possible because the problem seems familiar. also trying to stick to a rom for use with adaptive storage. if i do have to wipe if that can be done on a newer stock OS that's fine as well but last time i messed with this tablet it wasnt