I want to upgrade firmware a little confused.. - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

Hello,
I have note 3 with stock rom 4.3 version MJ7. Its rooted.
I want to update to a custom rom, but i'm not exactly sure of the whole process, I have never flashed any custom roms before and haven't kept current with development of them. I want to update to lollipop, but I heard there was some issues with note 3, or would upgrading to a kit kat rom be better? I want to keep root, have a stable daily driver any recommendations?
Right now I am thinking about installing the lollipop version of Jasmine rom. So for this do I just install safestrap version 3.65 for jelly bean, and then can I just follow instructions on how to flash Jasmine rom? Or do I need to upgrade my firmware to 4.4.2? and/or safestrap to 3.75 first? Some video tutorials for Jasmine Rom start off with firmware 4.4.2 and safestrap 3.75.
If I need to upgrade to firmware to 4.4.2 and safestrap 3.75 first, whats the best way to do it?
Thanks.

Related

rooting

Hi
I am going to root my G2 for the first time. its currently on stock jellybean.
I would like to know if I should root now on jelly bean and install a custom rom or upgrade to stock kitkat first and then root?
if I am going to a kitkat custom rom would it make more sense to upgrade to stock kit kat first or is it easier to root from jellybean?
What are the advantages/disadvantages of either?
Hi
Can anyone advise on the above? I know I should be reading all the forums which I will but was just after a quick general answer so I know where to start from. I'm not new to rooting and flashing roms but I am new to the G2.
Thanks
I would recommend updating to Kit Kat first then rooting using IOroot25. That way you will have the latest radio/modem stuff to use KK Roms
Depends on the ROM. If the dev says you have to have Kitkat modem or other stuff from Kitkat, then update and root with ioroot25. If not, it will be a waste of time, so:
Download anything you need from the new ROM and put all in your phone storage (so that if you accidentally brick you still have files to flash in your SD), root, install recovery (I suggest TWRP) and from there flash your ROM!

[Q] Xposed on locked bootloader and Rolling back questions

Hello all,
I recently installed 5.0.1 rooted on galaxy s4 I337 using muniz's method and had some questions?
The main reason I rooted was to try to get xposed so I can edit the ui, I understand that it is not working on samsung devices right now, but when it does work, I understand the only way to install it is using a custom recovery.
Since I have a locked bootloader and am on 5.0.1 I don't think there is a way to get a custom recovery on here, correct me if I'm wrong.
How would I install the xposed framework? Will flashfire be able to load it?
Also, if I were to revert back to the stock NB1 build, can I re-root and install clockworkmod (would LOKI work then?) on it and then go to a custom rom like cynogenmod or are there problems with this because I already have updated all the way to 5.0.1? (I've done this rollback through ODIN before and it's not too bad.)
I'm new to android modding so this has been a learning experience.
Thanks
Once upgraded to the locked bootloaders, there is no going back to loki. You can downgrade from 5.0.1 to 4.4.2, but you can only use safestrap recovery, and only touchwiz based firmware. Also, safestrap doesn't work on 5.0.1 yet. From what I have read, with 5.0.1 you'll have to wait and see what the developers come up with. If you care to learn more about the history of bootloaders, there is lots of info in these forums.
Engitheneer said:
Hello all,
I recently installed 5.0.1 rooted on galaxy s4 I337 using muniz's method and had some questions?
The main reason I rooted was to try to get xposed so I can edit the ui, I understand that it is not working on samsung devices right now, but when it does work, I understand the only way to install it is using a custom recovery.
Since I have a locked bootloader and am on 5.0.1 I don't think there is a way to get a custom recovery on here, correct me if I'm wrong.
How would I install the xposed framework? Will flashfire be able to load it?
Also, if I were to revert back to the stock NB1 build, can I re-root and install clockworkmod (would LOKI work then?) on it and then go to a custom rom like cynogenmod or are there problems with this because I already have updated all the way to 5.0.1? (I've done this rollback through ODIN before and it's not too bad.)
I'm new to android modding so this has been a learning experience.
Thanks
Click to expand...
Click to collapse
If xposed ever is updated to support Lollipop Touchwiz, you'll be able to flash it using Flashfire or using the Safestrap workaround (flash 4.4 kernel so you can get into safestrap, flash files, then flash 5.0 kernel). There's no way to go back to CWM or TWRP past the old MF3 4.2.2 update, which has long come and gone now.

Newbie requesting help to upgrade from 4.2.2 to Lollipop

Hello,
I have a rooted i337 with MDL baseband, running stock 4.2.2 firmware. I am currently out of the US and therefore cannot receive any OTA. I want to upgrade to Lollipop or Marshmallow based custom ROMs, esp those that can still use the IR feature of the S4.
Can anyone guide me on how I do this upgrade, without bricking my phone? Would truly appreciate your help. Thanks.
Have you tried running ota updates via wifi without a SIM card in the phone.
To run a custom rom, you would need to install a custom recovery to flash the rom. Some mm and LP ROMs may not work with a 4.2.2 modem and bootloader.
If you want to use a custom ROM, DO NOT take any OTA updates. If you take an OTA and it is successful, then you will no longer be able to install a custom ROM.
Here is the Cyanogenmod thread to install CM to your phone: http://forum.xda-developers.com/showthread.php?t=3008609
If you would like to update to official ATT/Samsung lollipop(there is also a way to have root)[remember, once you take an official update from MDL, then you will no longer be able to install a custom ROM and you may never be able to get Marshmallow]: http://forum.xda-developers.com/showthread.php?t=2926642

Rooted 4.4.2 upgrades

I have another S5 I am running 4.4.2 on and would like to load the MOAR Rom to it. How can I do this and get around the Verizon warning about unapproved software? My phone is rooted and had Safestrap 3.75 right now. I tried to load the MOAR Rom via safestrap and got the unapproved software warning. Thanks! I am a noob with fighting these super locked down things from VZW.
I would lke to know the same thing
This is my recommendation as to i don't care to flash anything higher than OD5. You can flash Muniz_ri's to OC4 and keep root ROM and from there flash away to any ROM in this Forum section and update the firmware by flashing the latest firmware NO Bootloader Zips. Again that's what I do and haven't had any issues and i can Odin back to NCG and "officially" run a KK ROM. Also, I'm currently running the MOAR ROM and on the latest firmware which is PB1. Was running Jrkruse's Norma Note5 ROM but went back to MOAR for the moment....

Install Custom Recovery Samsung Galaxy AT&T S4 SGH-I337 Ver 5.0.1 Non-Rooted. OK2

Install Custom Recovery Samsung Galaxy AT&T S4 SGH-I337 Ver 5.0.1 Non-Rooted. OK2
Hello, I Want to do some modifications to my Samsung Galaxy S4 and Have so many questions that I am not sure were to start? Yes I'm a noob but learning. I have a SGH-I337 phone that is unlocked so I use it for T-mobile. The phone came with KitKat 4.4.2 NB1 firmware but I managed to update it manually to the latest firmware OK2.
What I would like to do is install a custom recovery and install a clean non bloated Rom. Maybe a custom such as CyanogenMod? Questions: Is there any recovery software that will work on my present upgraded phone such as Safestrap, TWARP,PhilZ or CWM and in doing so I am guessing I need to root my phone first? When you root a phone does that unlock the boot loader? I have read articles saying you can only install custom recovery on the older firmware such as kitkat 4.4.2. or unless a update comes out. I also have read articles that I cannot downgrade and am not sure what that means as I have read articles that I can use Odin and reinstall my stock firmware NB1 is that true? Is there a way to downgrade your upgrades?
I see a lot of articles how to install recovery software but they do not always say what firmware version they are installing it to so I wont even try it. I am guessing-it is the older firmware 4.4.2.
I have read I can flash my kernel to an older Kernel such as NB1 then root it install a custom recovery then upgrade the kernel again? Not sure it I can upgrade or downgrade kernels that are for my phone?
I did manage to root my phone awhile back when it had kitkat 4.4.2 NB1 but had problems later on with my touch screen going crazy as if someone was in my phone so I brought it back to stock by using Odin and reinstalling NB1 firmware hoping to fix the problem. After installing stock firmware I decided to upgrade to lollipop 5.0.1 OB2 and that is were I am now. About my touch screen going crazy I have been reading it may be due to cheap USB chargers which I am using but that is another story.
Well any-help or leads would be appreciated.
Maybe if I wait long enough someone will come up with a custom ROM for my latest firmware as well as rooting it?
Steve

Categories

Resources