Hello everybody
iv'e got a big problem.
Today i tried to install a stock rom from samsung on my galaxy s4 black edition using the programm odin.
but the instalation was aborted and after rebooting the phone i got this message;
firmware update encountered an issue. please select recovery mode in kies & try again.
and in the left top of the screen this:
odin mode
product name (GT-I9505)
current binary: samsung officialy
systemm status: custom
knok kernel lock : 0x0
knox warranty void 0x0
CSB-CONFIG-LSB: 0x30
Write protection: ENABLE
eMMC Burst mode : enabled
i cannot come into the recovery mode anymore, only downloading mode.
tried to install again but get the message that a pit file is missing?
tried to repace pit file but doesnt work.
anyone help???
im DESPERATE!!!:crying::crying::crying:
greetings vic
https://www.youtube.com/watch?v=Th2Jy9QXhxo
In short, the video tells you to try again with Odin. What it doesn't tell you is to try a different USB port and don't use a hub. Also, the PIT file can be downloaded here in the forums, so please search for it.
Related
need help
i have a n9005 that i cant use (dead).
No recovery, only download mode
Odin mode
Product name: sm n9005
current binary :samsung official
system status fficial
reactivation lock (KK) OFF
knox kernel lock: 0x0
know warranty void :0x0
qualcom secureboot :enable (CSB)
Rp swrev; s2, t2, r2, a3, p2
write protection: enable
UDC Start
when i powered it ON, only phone model appears.
when i repeat this process, sometime an error message " mmc read fail" appears.
I cant remember the product code so i tried different firmwares but ODIN fails and says "mmc write fail" , "there is no pit partition" message
when i tried adding pit file thru ODIN, "mmc write fail" appears
hope you can help me
Hi,
This just happened to me today. I was messaging a friend on my phone when all of a sudden it shuts down. Now when it reloads after the samsung logo I box pops up saying Unfortunately, System UI has stopped.
Anyone please help us
hello! i have Gt-i9505 and i just tried to flash stock firmware by Odin but its failed dont know why.
got phone from Uk and i am using it in india. after flash error i am not able to turn on my phone but its stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen.
its showing
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLE
eMMC BRUST MODE: enabled
Please help me what to do now ?
jimmysmart83 said:
hello! i have Gt-i9505 and i just tried to flash stock firmware by Odin but its failed dont know why.
got phone from Uk and i am using it in india. after flash error i am not able to turn on my phone but its stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen.
its showing
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLE
eMMC BRUST MODE: enabled
Please help me what to do now ?
Click to expand...
Click to collapse
Reboot ur device in Download Mode and reflash Stock ROM.
jimmysmart83 said:
hello! i have Gt-i9505 and i just tried to flash stock firmware by Odin but its failed dont know why.
got phone from Uk and i am using it in india. after flash error i am not able to turn on my phone but its stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" screen.
its showing
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLE
eMMC BRUST MODE: enabled
Please help me what to do now ?
Click to expand...
Click to collapse
Please more info
What rom or firmware you had , what bootloader? what firmware were you trying to flash? Odin logs??
MAX 404 said:
Please more info
What rom or firmware you had , what bootloader? what firmware were you trying to flash? Odin logs??
Click to expand...
Click to collapse
thanx for your reply, i just fixed it by flash lollipop 5.0 stock firmware (UK). its working great
thank again for your reply. :good:
jimmysmart83 said:
thanx for your reply, i just fixed it by flash lollipop 5.0 stock firmware (UK). its working great
thank again for your reply. :good:
Click to expand...
Click to collapse
Great Mate !!
Thanks for let us know.
I successfully installed Safestrap and it never really seemed to work (some ROMs would load and not everything on the phone worked, some ROMs just bootlooped etc.), so I just used stock.
I tried installing a rooted Lollipop stock ROM to a different safestrap partition, and when I restarted the phone Safestrap no longer started up. I could get into download mode and recovery mode (not TWRP/CWM just regular recovery), but the normal boot would show a screen saying "System software not authorized by AT&T has been found on your phone."
Since Safestrap was no longer loading, I tried flashing the stock jellybean kernel with ODIN, and is gave me a FAIL! (Auth) (Complete(Write) operation failed). I then tried repartitioning with the pit file, and it gave the same error.
It seems I can't flash with ODIN (I'm guessing because of Safestrap?) and for some reason Safestrap won't show up either. Any ideas?
Edit:
When trying to use ODIN, my phone displays:
ODIN MODE
PRODUCT NAME: SGH: I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNAEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD: ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE : enabled
START [224, 1440]
SW REV. CHECK FAIL: fused: 5, Binary: 4
You have to flash a higher version. The last line in the output indicates that the fuse count of the bootloader on the phone is 5 vs the one you are flashing is 4
Sent from my A0001 using Tapatalk
I have Samsung Galaxy Note 3 SM-N9005.
I only have this info about my phone that is written in the above line.. because I bought it in used condition, I don't know whether it is repaired or refurbished.. it was working fine on Android 5.0 (it had some Vodafone apps) then I tried to install 7.1.2 but it failed because I wiped out system before installing.. I gave it to a repairman who installed 4.4 on it and that was not working fine I again tried to install STOCK 5.0 on it through Odin but at last it failed and said "invalid ext4".. now my phone only says " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Now please please please tell me, what can I do.??? It's a serious problem for me
------------------------------------------------------
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S2, T2, R2, A3, P3
SECURE DOWNLOAD : ENABLE
UDC START
-------------------------------------------------------
Stock roms .
updato.com sammobile.com samsung-updates.com
1) Download the latest Odin...I have attached it if you need it...
2) Download this Official Stock Lollipop Rom from HERE...
3) Unzip the above Firmware file...
4) Enter into Download mode (Volum down+Power+Home)...
5) Put the .tar.md5 file which you extracted before into AP of Odin & press Start...
If you get a green PASS message in Odin, you did the right thing...
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
jeff8585 said:
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
Click to expand...
Click to collapse
SAME. Did you fix it somehow?