Related
Hello everyone
I am looking to root and install a custom ROM on my AT&T S4 SGH-i337 (MF3) phone. The whole process is confusing... I see one video saying this and another saying that. I finally found a site to root my phone but the loki recovery step says "loki aboot version does not match device" while using Terminal emulator. I wanted to install the FOXHOUND ROM or something similar. I just wish someone had ONE place to get the correct information for your specific phone.
The link below is where I found out how to root my S4.
honai-android.blogspot.com/2013/08/how-to-root-galaxy-s4-at-sgh-i337-on.html
This is where I downloaded my loki recovery
galaxys4root.com/clockworkmodtwrp-recoveries
Thank you so much for ANY information you can provide!
capth4u said:
Hello everyone
I am looking to root and install a custom ROM on my AT&T S4 SGH-i337 (MF3) phone. The whole process is confusing... I see one video saying this and another saying that. I finally found a site to root my phone but the loki recovery step says "loki aboot version does not match device" while using Terminal emulator. I wanted to install the FOXHOUND ROM or something similar. I just wish someone had ONE place to get the correct information for your specific phone.
The link below is where I found out how to root my S4.
honai-android.blogspot.com/2013/08/ how-to-root-galaxy-s4-at-sgh-i337-on.html
This is where I downloaded my loki recovery
galaxys4root.com/clockworkmodtwrp-recoveries
Thank you so much for ANY information you can provide!
Click to expand...
Click to collapse
If your phone came with MF3 already then I'm afraid you can't flash Custom Roms yet since the bootloader is locked my friend.
Sent From My Galaxy S 4 SAMSUNG-SGH-I337 Running On New Deadly Venom v8.0.0
I would highly recommend you stop everything you're doing and put some time into reading up about MF3. You are likely to bork your phone if you continue. Cheers
capth4u said:
Hello everyone
I am looking to root and install a custom ROM on my AT&T S4 SGH-i337 (MF3) phone. The whole process is confusing... I see one video saying this and another saying that. I finally found a site to root my phone but the loki recovery step says "loki aboot version does not match device" while using Terminal emulator. I wanted to install the FOXHOUND ROM or something similar. I just wish someone had ONE place to get the correct information for your specific phone.
The link below is where I found out how to root my S4.
honai-android.blogspot.com/2013/08/how-to-root-galaxy-s4-at-sgh-i337-on.html
This is where I downloaded my loki recovery
galaxys4root.com/clockworkmodtwrp-recoveries
Thank you so much for ANY information you can provide!
Click to expand...
Click to collapse
As the others mentioned, you should read up more on MF3, and stop trying to do anything to it. MF3 is the firmware version AT&T pushed out after the Loki exploit was released, and with it they patched the exploit.
From this point, you have a couple options:
1. Root using this method, and then use Xposed mods to customize your stock rom.
2. Follow this thread closely, and wait for Hashcode to release a working version.
Oh, and get your information only from this site. Don't go to galaxys4root.
mattdm said:
As the others mentioned, you should read up more on MF3, and stop trying to do anything to it. MF3 is the firmware version AT&T pushed out after the Loki exploit was released, and with it they patched the exploit.
From this point, you have a couple options:
1. Root using this method, and then use Xposed mods to customize your stock rom.
2. Follow this thread closely, and wait for Hashcode to release a working version.
Oh, and get your information only from this site. Don't go to galaxys4root.
Click to expand...
Click to collapse
Thank you... My phone is already rooted so what should I do? Should I just leave it as is and wait for a fix for the recovery?
capth4u said:
Thank you... My phone is already rooted so what should I do? Should I just leave it as is and wait for a fix for the recovery?
Click to expand...
Click to collapse
For now there's nothing you can do till someone unlocks the bootloader you can use the MOD WanamXposed.1.4.2 look it up in playstore make sure if you use it to install
first XposedInstaller_2.1.4 then WanamXposed.1.4.2 that's if your wanting to custimize the stock rom a bit, Read the instructions in playstore for WanamXposed.1.4.2
capth4u said:
Thank you... My phone is already rooted so what should I do? Should I just leave it as is and wait for a fix for the recovery?
Click to expand...
Click to collapse
From what I see is you have 2 options.
Option 1: Keep your phone rooted and don't mess anything up. So you have to be very careful while rooted and not mess with the system files.
Option 2: Check this thread out as someone was able to reflash their galaxy s4 on mf3 at Best Buy' Samsung Kiosk:
http://forum.xda-developers.com/showthread.php?t=2432427&highlight=mf3
mattdm said:
As the others mentioned, you should read up more on MF3, and stop trying to do anything to it. MF3 is the firmware version AT&T pushed out after the Loki exploit was released, and with it they patched the exploit.
From this point, you have a couple options:
1. Root using this method, and then use Xposed mods to customize your stock rom.
2. Follow this thread closely, and wait for Hashcode to release a working version.
Oh, and get your information only from this site. Don't go to galaxys4root.
Click to expand...
Click to collapse
Slightly offtopic but I notice Hascode is working on Verizon's S4. How will Hascode's version be compatible with AT&T? Is it mainly because both verizon & at&t have a similar locked bootloader?
capth4u said:
Thank you... My phone is already rooted so what should I do? Should I just leave it as is and wait for a fix for the recovery?
Click to expand...
Click to collapse
At this point, there's no harm in installing the Xposed Framework, and using Wanam Xposed. There are a lot of cool tweaks in there, and the only requirement is root, which you already have.
haremmon said:
Slightly offtopic but I notice Hascode is working on Verizon's S4. How will Hascode's version be compatible with AT&T? Is it mainly because both verizon & at&t have a similar locked bootloader?
Click to expand...
Click to collapse
In Hashcode's OP, he says that he is developing SafeStrap for "the locked versions of the Samsung Galaxy S4." I assume that means both Verizon and AT&T.
Pick up a s4 today that is on mf3. But i dont think it came shipped with mf3. I duno if this has been asked but can i downgrade it sense it wasnt shipped with mf3?
OK so I have looked everywhere to find out which method is ok to run on the vz version of the note 3 running MJE. I think I find my answer and then people start talking about a different model of the note 3. So I figured the best way to find out is just ask.
How do I root without tripping the knox security? I'd like the option to flash my own roms, but have been able to figure out on my own that flashing a custom recovery will trip xnox. Any help would be greatly appreciated.
jmc2543 said:
OK so I have looked everywhere to find out which method is ok to run on the vz version of the note 3 running MJE. I think I find my answer and then people start talking about a different model of the note 3. So I figured the best way to find out is just ask.
How do I root without tripping the knox security? I'd like the option to flash my own roms, but have been able to figure out on my own that flashing a custom recovery will trip xnox. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Right now Kingo can be used to root mje build without tripping Knox. I have heard some guys having success with older versions of Kingo.
The only recovery available is safestrap. Since our bootloader is locked down. Safestrap and flashing roms for safestrap will not trip knox either.
Also heard guys using Vroot to root mje.
Tapped via my Blacked out Eclipsed Note 3
This is what I had assumed from what I read I just wanted to hear it for sure, directly for our device. Thanks a ton!!
jmc2543 said:
This is what I had assumed from what I read I just wanted to hear it for sure, directly for our device. Thanks a ton!!
Click to expand...
Click to collapse
You bet bro. Maybe I will see you in the Eclipse thread?
Tapped via my Blacked out Eclipsed Note 3
Actually thanks for this thread, I was wondering the same thing. If I could add to it, is it possible to unroot and go back to complete stock if need be?
There are instructions on how to unroot back to stock but like everything else can't conform it is for this model. Thank you vz and Samsung for making crap difficult!
kubes069 said:
Actually thanks for this thread, I was wondering the same thing. If I could add to it, is it possible to unroot and go back to complete stock if need be?
Click to expand...
Click to collapse
Yeppers! Flashing the stock image with odin will wipe all traces of root and safestrap, and return your phone to normal.
<Note3>
Q&A for [GT-I9505 + GT-I9505G] CF-Auto-Root
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Thank you
It work like charm for me! Best regards!
Hey CF,
I have a problem with my Samsung Galaxy S4 GT-I9505.
It's the first time I wanted to root my phone, aswell it's the first time I connected my phone to my notebook. I followed these instructions step-by-step. Result after the Start button:
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
My phone is still in download mode & didn't reboot yet. What can I do to not brick my phone? If you need some more information, just tell me.
Kind regards.
//edit: Problem solved - battery removed & turned it on again. :good:
Rooting my device
Hello,
I am going to purchase an S4, I9505 and I would like to root the phone, just simply because I want to remove a bloatware apps and gain true control of the device.
My question is - if I follow the instructions in the first 3 posts to letter, how much is the chance to brick the phone? The phone is already on 4.4.2. Do I need to do anything else, or just follow the guide?
I know its a silly question, but I am going to spend some money on the device, and don't want to brick it...
Thank you in advance!
tamasnemeti said:
Hello,
I am going to purchase an S4, I9505 and I would like to root the phone, just simply because I want to remove a bloatware apps and gain true control of the device.
My question is - if I follow the instructions in the first 3 posts to letter, how much is the chance to brick the phone? The phone is already on 4.4.2. Do I need to do anything else, or just follow the guide?
I know its a silly question, but I am going to spend some money on the device, and don't want to brick it...
Thank you in advance!
Click to expand...
Click to collapse
0,0000000001%. It's almost impossible to brick your phone.
Root have stopped working.
I9505, 4.2.2, XXUAMDE.
The phone have been rooted for more than a year.
Yesterday I tried "Wondershare\Dr.Fone for Android" as some smemo have been lost. Im not 100% sure this is why the root was lost.
Today I downloaded CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 and re-rooted using Odin3.
The process seemed to run fine - but SuperSu cant start - get the "no binary fil installed" error.
What can I do?
Rooting S4 GT-I9505
Will CF Auto Root work on an S4 (Android 4.4.2) with the baseband version I9505XXUGNJ3? I really can't afford a new phone but I want to root this one so I'm taking as many precautions as possible. Thanks.
SgtJamesHeller said:
Will CF Auto Root work on an S4 (Android 4.4.2) with the baseband version I9505XXUGNJ3? I really can't afford a new phone but I want to root this one so I'm taking as many precautions as possible. Thanks.
Click to expand...
Click to collapse
I would install a custom recovery and get the root access through this one. Everytime I made that this way, works pretty good. I'm always using philz touch recovery
Tkkg1994 said:
I would install a custom recovery and get the root access through this one. Everytime I made that this way, works pretty good. I'm always using philz touch recovery
Click to expand...
Click to collapse
Thanks, I'll try that when I get access to a computer. I wasn't expecting an answer so quickly since the last post was on the 21st of November with no reply, so thanks.
SgtJamesHeller said:
Thanks, I'll try that when I get access to a computer. I wasn't expecting an answer so quickly since the last post was on the 21st of November with no reply, so thanks.
Click to expand...
Click to collapse
No problem mate
Here would be the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.58.7-jflte.tar.md5/
it is for flashing with odin3.09. Try it or write me an inbox message.
Please hit thanks bro :highfive:
SgtJamesHeller said:
Will CF Auto Root work on an S4 (Android 4.4.2) with the baseband version I9505XXUGNJ3? I really can't afford a new phone but I want to root this one so I'm taking as many precautions as possible. Thanks.
Click to expand...
Click to collapse
cf auto-root works with any version.
Lennyz1988 said:
cf auto-root works with any version.
Click to expand...
Click to collapse
I'll try auto root first and if that doesn't work for whatever reason, I'll try the rom mentioned earlier.
Hi!
I am willing to root my Galaxy S4 GT-I9505 (brand-Vodafone Italy and running XXUGNJ5 firmware) using CF Auto-Root, in order to flash TWRP and Google Edition ROM on it.
It is not a network-locked smartphone, but just "branded" (it gets some easily uninstallable Vodafone bloatware each time I update it via OTA, however I can use whatever SIM I want in it): is it risky for me to root it using Chainfire Auto-Root?
Rooting a nordic s4
I got a nordic s4.
Xxugnj8 4.4.2. I OTA 1 week ago.
Will it work to root with the correct file from CF webpage?
And what will happen with that knox thing? I dont use knox and i disabled what i could so far. I jist want root. Dont wanna mess around with kernels and roms. Cause of bad experience.
I read some people gets random reboots and so.
Rooted s2 long time ago and bricked it cause some bug.
Then rooted a s3. Worked with a charm with cf autoroot.
Hi.
hi folks. My phone broke. Was perfect, custom recovery and cyanogen mod and all apps before. They wiped my phone and installed stock samsung rom with all of the bloatware.
Its running. I9505XXUGNJ3 ...
Was a while ago since i rooted now. Can anyone point me in the right direction? need to get cyanogenmod again.
Odin. I need the right firmware. Cant find my version here..
KOT49H.I9505XXUGNJ3
thanks
car bluetooth
does android lollipop in s4 works with the car audio Bluetooth
Rooting I9505G running LRX21P
Hi all,
I tried rooting my I9505G running Lollipop 5.0.0 LRX21P. I used ODIN and CF-Auto-root. SuperSu now wants to update, but the update fails.
I later realized that the CF version I used was not meant for Lollipop. Thankfully, my device is still working normally.
Any ideas on how to root?
Thanks a ton!
Hi, I'm new to Samsung and just wanted to know if anyone has been able to successfully root XXUFNC5? I got 4.4.2 and Knox running on it.
installation aborted. symlink: some symlinks failed (status 7)
and keeps rebooting to recovery
help
hi,
it is possible to root actual firmware
PDA: I9505XXUGNK4
with current rootkit for KOT49H.I9505XXUGNJ8 ?
if not, when is update comming?
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Dravekx said:
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Click to expand...
Click to collapse
I didn't upgrade to NC4, it came like this.
rdar_93 said:
I didn't upgrade to NC4, it came like this.
Click to expand...
Click to collapse
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
mirrin said:
You do not have a dev version so cm 11 or 12 is a far off dream you won't get. Your bootloader is locked there is no unlock.
You are in luck nc4 is root able using towel root then safe strap and the unified firmware. You will need odin and a pc for flashing a few things the NK1 modem towel root and the unified firmware. Pick a rom from the development thread i suggest jasmine 1.x or eclipse.
Click to expand...
Click to collapse
Copied from another post I had.
I don't know much about the device which is why I'm trying to find out.
Dravekx said:
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
Click to expand...
Click to collapse
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
rdar_93 said:
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
Click to expand...
Click to collapse
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
rdar_93 said:
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
Click to expand...
Click to collapse
Dravekx said:
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
Click to expand...
Click to collapse
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
rdar_93 said:
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
Click to expand...
Click to collapse
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Dravekx said:
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Click to expand...
Click to collapse
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
rdar_93 said:
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
Click to expand...
Click to collapse
The kernel can't be changed...although it can be "tuned" if you have root.
http://forum.xda-developers.com/showthread.php?p=58813428
Sent from my Note 3 via Tapatalk
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
BladeRunner said:
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
Click to expand...
Click to collapse
Thanks man, I was supposed to update this thread saying that I got through with the proper procedure for installing Jasmine Rom
Although I was running Eclipse before, and I wanted to try going back to stock but it just got stuck on the Verizon splash screen
I'm thinking it's because I had the NC2 kernel active when I should have gone back to the NC4 kernel
I looked for a NC4 kernel to flash but I only saw the modems and tar files, so not knowing if those were the same as kernels I decided to just try Jasmine. So far, I like it.
I have crazy battery drain though. I think it's because I'm running it in Slot 1
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
en11gma said:
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
Click to expand...
Click to collapse
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
rdar_93 said:
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
Click to expand...
Click to collapse
Safestrap does not trip knox.
mjh68 said:
Safestrap does not trip knox.
Click to expand...
Click to collapse
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
rdar_93 said:
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
Click to expand...
Click to collapse
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
mjh68 said:
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
Click to expand...
Click to collapse
Then I must be confused about what knox really is.
What is "Knox" then?
Hey everyone,
I'm new here but have a decent knowledge base on what i'm looking for. I recently acquired a Galaxy S5 (ATT). Model is : G900A. It's on Android 4.4.4. I'm having a tough time tracking down specific information for this device. What i'm looking for:
1. A root option aside form Towelroot, as it doesn't support my device and I can't seem to find another that would support the ATT version.
2. Does this root option trip knox?
3. Which Recovery software would be best suited for this device if any at all?
Any help would be appreciated. I'm hoping the information i've found is outdated and i'm just missing something but any additional info would be helpful or at least give me better insight to the position S5 rooting is at. Thanks!
Is there anyone with this knowledge?
Check the att galaxy s5 general section there are threads about this. Quick summary for you though, the only option is towelroot but you need to downgrade, towelroot does not trip knox, the only recovery availanle is safestrap and you can only flash tw based roms so no aosp or aokp or CM.
Sent from my SM-G900A using Tapatalk
Thank you so much for the rundown. I've looked further into it and had a couple more questions that can hopefully be answered for my clarity.
1. I downloaded 4.4.2 from sammobile, i'm assuming it's stock and won't trip knox.
2. Is there a certain version of Odin I should use as to again, not trip knox.
3. Once I root on 4.4.2, is there a vanilla version of a ROM w/ TW that I can install to retain most functionality that i've gotten used to?
Anima The Aeon said:
Thank you so much for the rundown. I've looked further into it and had a couple more questions that can hopefully be answered for my clarity.
1. I downloaded 4.4.2 from sammobile, i'm assuming it's stock and won't trip knox.
2. Is there a certain version of Odin I should use as to again, not trip knox.
3. Once I root on 4.4.2, is there a vanilla version of a ROM w/ TW that I can install to retain most functionality that i've gotten used to?
Click to expand...
Click to collapse
Use the downloads from the thread, not sammobile. You cannot trio knox as far as i know on the att model. Ya tbere are a few roms, theyre all touchwiz based due to the fact that its the only roms you can flash since the bootloader is locked, just check the att s5 android development section and pick your favorite.
Sent from my SM-G900A using Tapatalk
Rakuu said:
Use the downloads from the thread, not sammobile. You cannot trio knox as far as i know on the att model. Ya tbere are a few roms, theyre all touchwiz based due to the fact that its the only roms you can flash since the bootloader is locked, just check the att s5 android development section and pick your favorite.
Sent from my SM-G900A using Tapatalk
Click to expand...
Click to collapse
What I meant was finding a legit stock ROM. I can't seem to locate any here on this site unless i'm really making a fool of myself. I'm trying to downgrade my phone to 4.4.2 and towelroot it. Then find a good rom for 4.4.4. I have no problem installing a TW ROM. There's just so much information and so many ROM's it's difficult to narrow down a process for my specific resolution. I do appreciate the patience so far and thanks again for more info! Also, do you know which verison of Odin I should grab?
bump up.
You'd better ask in the AT&T Samsung Galaxy S 5 forum for more support.
I found this by snooping around a little more.
http://forum.xda-developers.com/att...-g900aucu2aoa1-4-4-4-2-3-2015-t3021120/page19
That worked. For anyone else having trouble locating information, check the above link. Worked for me!