Related
Hi everyone looking for some advice.
Yesterday I noticed my Galaxy S screen wouldn't come on after taking it out of my work trouser pocket. Did the usual took the battery off and re-installed it. The screen is now black and not showing anything apart from the very top of the screen which shows some colour and fuzziness. I noticed this morning a half inch crack to the screen middle left of the phone which is internal. The crack is underneath the screen. Now I am 100% this has not been caused by me. The phone has been in a flip case since new and I have never dropped the phone or extreme pressure applied to the screen. The phone is in mint condition with no scratches what so ever. Took the phone to T-Mobile this morning as it is covered under warranty for 24 months and the phone is a year old. The first person I spoke to looked at the phone and saw the crack. They said to me that there would be no point sending it off for repair as it would be deemed as accidental damage. I did point out that there was know way I caused the crack. The person stated even having it in your pocket can cause the screen to crack if pressure is applied to it by other items e.g keys or if I pressed against it. The phone was the only thing that was in my pocket and it was a side pocket of my trousers where no pressure is ever applied. I have kept it in the same pocket of my work trousers for a year and never had any problems. The person then referred me to another collegue who was more helpful. She looked at the phone and confirmed that it was in mint condition with no scratches to the phone. She advised that she would send it off for repair but did explain that they could refuse to repair it or replace if it was deemed accidental damage.
I just have this bad feeling that it is going to come back with them saying it was my fault even though I know it wasn't. Does anyone have any views or opinions on what to do if this happens. I have searched the net and found other people around the world who have had the same problem with their Galaxy S. Looking at prices I will be looking at a few hundred pounds to repair it which I don't think is worth it.
I know you say adamantly that you did not cause the crack, But in some way or other you must have..
I know you are extra extra careful with your phone, Im the same as mine, But there is no way the screen could just crack on its own.
It doesnt have a mind of its own, It didnt crack due to stress, it wasnt poorly. You must of accidently cracked it without realising.
The best you can do is hope it gets fixed under warranty, Otherwise scout around for a phone shop that could replace it for you.
azzledazzle said:
It doesnt have a mind of its own, It didnt crack due to stress, it wasnt poorly. You must of accidently cracked it without realising.
Click to expand...
Click to collapse
Yeah .. sure!
Let me give you an example of ... my car.
The story:
Windshield broken due to a small rock on the highway (the usual stuff). Went to repair shop, new windshield installed. Everything was perfect until this summer (2 years later). The windshield was still in great condition, no cracks, no pinches, no nothing ... as new. One day, during the lunch break from work I've started the engine, and in one minute after the air conditioner started, the windshield cracked. It was a very sunny day and my car was parked in the full sun.
Who's fault it is? Mine for miss usage? Manufacturer of the windshield? God? poor assembly at the repair shop? pick one.
I would say that the amoled will be replaced because its obvious no mechanical stress was applied ... it was just a faulty unit, nothing more. I have a friend who replaced the amoled screen, under warranty, due to 3 dead pixels ... twice.
ro_explorer said:
one minute after the air conditioner started, the windshield cracked. It was a very sunny day and my car was parked in the full sun.
I have a friend who replaced the amoled screen, under warranty, due to 3 dead pixels ... twice.
Click to expand...
Click to collapse
wouldnt the heat from the sun, Then the sudden cold cause such thing to crack ? glass DOES break due to rapid temperature changes, Try this at your house. Put the hair dryer to the window on a really cold day and leave it till it breaks .
And your friend got his screen replaced because of dead pixels.... That is a fault, that was not his fault.
Its a strange case, but its hard to think the screen just broke of its own accord.
I was trying to underline the obvious .. sometimes things break doe to some other reasons than "you". It is obvious that a glass will be under great stress if you put it uncer big temperatures changes but still ... that glass was supposed to resist to such stress.
Same thing with the screen in question: the amoled is a thin film placed on top of some strong substrate. The whole structure is supposed to resist to certain stress and there is no way you can break it by miss usage unless you will break the outer glass also (gorilla glass + capacitive digitizer). So, no matter we are talking about dead pixels on a 2 months old screen or of a cracked amoled structure under the intact gorilla glass, the "cause" is the same : faulty unit (maybe is the amoled itself which has a flaw, maybe is the way it was mounted in the phone ... doesn't really matter).
Maybe your right, But the whole thing is still very strange.
Anyway lets just hope the outcome is better, and it gets fixed under warranty.
But you know what these service centre folk are like, They will try anything to avoid repairs.
Thanks guys for your replies. As I said the crack is internal underneath the outer screen so surely if I had damaged it the outer screen would be damaged. I'm not very hopeful that T-Mobile will repair it but I'll just keep my fingers crossed.
I will let you know the outcome.
Thanks
sandeept said:
Thanks guys for your replies. As I said the crack is internal underneath the outer screen so surely if I had damaged it the outer screen would be damaged. I'm not very hopeful that T-Mobile will repair it but I'll just keep my fingers crossed.
I will let you know the outcome.
Thanks
Click to expand...
Click to collapse
Does your contract have an insurance policy ? if so that should cover accidental damage (i know its not accidental, But they may say it is)
And if not, are T mobile fixing it, Or are they going to send it to samsung ?
Gotta admit its a cracking screen eh? [Nt]
:d :d :d :d :d :d :d
Unfortunately I didn't take out insurance. The phone has been sent away by t-mobile for their repairers to assess but they did advise that it probably will come back not repaired due to the crack being my fault even though I said that I believe I didn't cause it.
sandeept said:
Unfortunately I didn't take out insurance. The phone has been sent away by t-mobile for their repairers to assess but they did advise that it probably will come back not repaired due to the crack being my fault even though I said that I believe I didn't cause it.
Click to expand...
Click to collapse
Well if tmobile send it back UN fixed, Send it back to samsung, Is it still under the 12 month warranty ?
I believe the warranty expires this week or next so probably wont be able to, thanks for the suggestion.
If you get it back from T-Mobile unfixed, sent it directly to Samsung.
Maybe they'll still fix it. If they dont they'll probably will call you to tell you how much fixing it will cost. Start telling your whole story again and again, make them tired of hearing
If they dont listen, tell them you want to put in a complaint. Ask for an email adres or something were you can send your complaint email to. Dont let them send the phone back.
Send a large mail explaining everything, maybe put in some laws that apply to your case, like that it has to be faulthy when manufactured etc.
Also that you havent had any scratches on it and that the crack is UNDER the glass.
If they reply again with "we dont fix it" again send a mail with telling them that the phone is in mint condition and that the crack UNDER the screen came out of nowhere and that by law they have to fix it. Make them believe you'll sue them in court if they dont fix it.
Even call them if necessary.
Do everything to be a pain in the ass and meanwhile make sure they dont send the phone back during all this.
Maybe it will work, maybe it wont. But its better then giving up. Gives you a bigger chance of success.
manufacturers like dont like problems that take a long time. And if you proof yourself to be an annoying customer, one that shows he wont give up and do everything that they can to give the manufacturer a bad name, they'll probably think its better to win that particular customer over then to fight him. They dont like bad press.
Maybe they'll fix it, maybe they dont, maybe even they'll give you a discount at fixing it. At least you didnt make it easy for them.
Thanks for the reply. I am definetly not going to just be pushed aside and give up. If the phone comes back un-repaired I am going to complain to T-mobile and keep complaining to them. I will also take your advice and send it to Samsung and complain to them. I know lots of other people who have iphones without cases who do not look after them, scratched, dropped and are still working fine. Then the opposite end there is my phone which has been in a leather flip case from new protecting the screen. I have never dropped it and it doesn't have a scratch on it. Really annoying!
Really there is only one reason a screen/windowzsheet of glass whatever will crack and that is due to force. Force of some sorts was applied to the screen and honestly, as much as you don't want to hear it, it was almost certainly because you leaned on in it. In the pocket and your next a desk, or a chair, and you wouldn't even know its happened 9/10 until you take the phone out to use it. Often the phone will still be "functional " except for the dark screen so you can still feel it vibrate with may's so it could be some hours later before you realise. Another possibility is it was a previous drop or bump that wasn't enough to do it there and then and has simply hit breaking point on this unfortunate day. :'( other causes are to much pressure when a replacement is fitted, as happens with car screens more often than you would think, all it takes is the smallest little bit of awkward pressure and sure enough. Extremely rare for this to happen on a phone as the screens are mounted and held in place in a fundamentally different way.
I've worked in phone shops and car dealerships to qualify my above statements and honestly for all the hassle you are going to face, from people like me mostly, that it simply doesn't break on its own and you being aware of the force is a mute point. The fact is the force was applied and the screen broke. You knowing it happened or even being responsible is not the point, the point is was it a manufacturing error that caused it. They gonna say no and its going to really piss you off and when all is said and done you'll wish you just got a new screen off eBay and fitted it yourself or found someone local who does it.
Just saying is all...
Hope you find a solution mate and I'm sorry if it seems cold but dem de facts....
Sent from my GT-P1000
Hello guys i am new so i have a quick question.I see there and there someone complaing for broken screen on samsung galaxy from itself is this some general case like some HTC or just 1 in 1 000 000?I buying samsung galaxy s or google nexus s (s lcd) depending on your answear?
Sory mate for posting in your thread but this is prety much connected with your problem.
Any news on your issue ?
@OP, Any update??
Update
T-Mobile repair centre emailed me last week stating that the repair was out of warranty as it is physical damage and they quoted £138 to fix. I refused the quote and asked for the phone to be returned to the shop. In the meantime I wrote a letter of complaint to T-Mobile. I picked up my phone a couple of days ago from the shop. Yesterday morning received a phone call from a really nice lady at T-Mobile complaints investigation team. I explained to her the whole situation and she immediately said without disputing it that they would replace the phone free of charge for a new one. Hopefully it is arriving tomorrow - RESULT!
sandeept said:
Update
T-Mobile repair centre emailed me last week stating that the repair was out of warranty as it is physical damage and they quoted £138 to fix. I refused the quote and asked for the phone to be returned to the shop. In the meantime I wrote a letter of complaint to T-Mobile. I picked up my phone a couple of days ago from the shop. Yesterday morning received a phone call from a really nice lady at T-Mobile complaints investigation team. I explained to her the whole situation and she immediately said without disputing it that they would replace the phone free of charge for a new one. Hopefully it is arriving tomorrow - RESULT!
Click to expand...
Click to collapse
WOW !!! that truly is a result ... Great news man ! I Highly highly doubted you would get any help considering the extremity of the circumstances.... its like a 1/10000 chance of that happening lol.
Buts its great that you are getting a new phone and havent been left with a HUGE bill.
a little moaning and complaining can go a very loooooooong way
So last week, I accidentally dropped my naked note 3 about 1.5 feet to a concrete sidewalk. Very little visible damage on the outside, but sadly, over the span of about 24hrs, the screen slowly faded to black (starting from the bottom left, where the most ammount of damage is visible, across the screen in a circular pattern), and now the screen appears to be completely dead. During the time in which the screen went black, the digitizer still worked, as I could still get the phone to register spen clicks on even the black areas of the screen (i.e. i could still get air command to pop up). There is also zero damage to the glass itself. No scratches, skuffs, or marks of any type. Looks brand new.
So I'm currently in the market for a replacement screen/digitizer/housing assembly, should the repair centre quote me more than $275 + taxes to fix.
I'm going with a complete housing, because while I'm sure its simply the LCD screen portion that's no longer working, those in themselves cost upwards of $250. And it would require me to seperate the glass from the housing/digitizer, and then reseal them with the new one. I figured it would be much more cost effective to simply buy the whole package pre-assembled for $25 more.
Problem is, you can get different housing part numbers depending on which version of the phone you have (verizon, at&t). So my question is this:
Will it matter if I purchase the cheapest version? As an example, the AT&T black housing is 275, but the Verizon Black housing is 289. The last thing i want to do is fork over the money and find I ordered the wrong part.
I'm from Canada, and sadly our carriers are never recognized in these bloody situations. I'm with Bell, and I'm 'fairly' certain its identical to AT&T, but I wanted peoples opinions from here, as you are by far the most knowledgable about parts/hardware etc.
I'm SO choked at myself for being careless. My phone seemed to be flawless, and didn't exhibit any of the faults other people complained about (screen discoloration, all the functions like multi-window, one-handed operation, etc. not working). And now I've gone and forced open heart surgery on the thing.
I was looking here for the part:
http://www.etradesupply.com/samsung.html
As you can see, they have multiple models listed, and I just need to know if I'm selecting the right one.
(I also think that AT&T is my best choice, because after opening up the phone down to the motherboard and other parts, AT&T is printed all over the place. But I could be reading more into that than I should).
Just get a free replacement with your warranty...
Payette1996 said:
Just get a free replacement with your warranty...
Click to expand...
Click to collapse
Because there is physical damage to the device? This voids most types of warranties, outside of some carrier warranties (it would actually void bell's, after reading over the fine print).
I basically have to fund the repairs myself, unless I sent it to the repair center, and they miraculously came back saying the damage didn't cause the problem, and it was just a defective screen. But the chance of THAT happening are pretty much nil.
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
jklew said:
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
Click to expand...
Click to collapse
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
imapfsr said:
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
Click to expand...
Click to collapse
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
thegrants82 said:
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
Click to expand...
Click to collapse
I purchased it from a reseller before it was released here and I also live in Canada where everything just costs a little more ?
thegrants82 said:
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
Click to expand...
Click to collapse
Some things cost more in other countrys. And I also wanted a really good reseller in case anything happens. With quick and good support. without need to send it, wait two weeks etcetc.
And ye. Payed 800$ here in Sweden.
GG3
Reading this made me look up just what's so great about Corning's various hardened glass, and I've realised it's much more to do with being scratch-resistant than actually shatter proof. Funny how easily marketing will leave you stuck with the wrong (inflated) idea ... and, sure, scratch resistance is nice, but then that's why you buy a nice cheap case for your phone rather than put it in your pocket together with your keys.
armadafan271 said:
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Click to expand...
Click to collapse
It won't be THAT cheap for a while. G2's were still going for like $400 up until the g3 launched.
jklew said:
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
Click to expand...
Click to collapse
How long did it take lg to send it back to you?
armadafan271 said:
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Click to expand...
Click to collapse
Loses $5 a day in value a day lol??
That would mean my phone would be worth $0 in a month from now...
The value goes down more like .50 cents a day at most...
Amb669 said:
Loses $5 a day in value a day lol??
That would mean my phone would be worth $0 in a month from now...
The value goes down more like .50 cents a day at most...
Click to expand...
Click to collapse
In a couple months you will have to pay someone to take it from you.
Sent from my LG-D851 using XDA Free mobile app
LG G3 repair
The G3 is ten times easier to repair than the G2. The back comes right off like any other normal android phone. Remove the screws that you see holding the back on the midframe/bezel. remove the top half using a safety pry tool and do the same with the bottom half. Disconnect the two ribbon connections at bottom near charging port. Take out battery if you haven't already. Heat the back using heat gun or hairdryer. Heat front of assembly using the same heat gun or hairdryer. There are no other ribbons or connections to worry about at this point. Using iSesamo bar or other prying tool remove the broken assembly. (Note: There is no adhesive holding the LCD to the midframe so the removal is very easy.) Just pry around the top and sides of the phone and pull up at top then slide old LCD assembly out. Be sure to use a good 3M adeesive when putting in the new assembly. Connect the ribbons back to the board, close phone, power the phone on and enjoy. The whole process should take no more than half an hour if you ever done any previous repairs to another phone. Hit thanks if this helps
https://www.youtube.com/watch?v=I-LUBTADX2U
Thanks a ton for this thread. I may be able to repair my G3 now. It has been unusable for 3 months now cause I could not find anyone that would repair it.
I need to replace display with bazel
imapfsr said:
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
Click to expand...
Click to collapse
Hey I am trying to do the same thing you did.
My question is how hard was removing the daughter board? What tool and technique you used?
I can't find a video or tutorial where they remove the little daughter board and wanted to know how hard it is to remove before ordering parts.
It really was very easy, much easier than I expected. The daughter board was also pretty easy and I think I ended up using my finger and a guitar pick but anything small will suffice. The two sides sticky is really not that strong so just have patience when pulling those pieces out as they do come off pretty easy, Just use caution, you will be fine.
I need help to apply my pre-cut adhesive to my LG G3 D850
I bought an lg g3 d850 digitizer+lcd combo and a precut adhesive sticker for the model. Howwever, I am not sure how to apply the adhesive because there is less than 1 mm of room on the sides. What is the best approach for me to apply the pre -cut adhesive. Here is the link to the adhesive that I am talking about.
Will LG still repair your LG G3 even if you tried repairing it yourself? I tried ordering a new screen and putting it in myself but that didn't work so the lg g3 has been opened which voids warranty.
My wife's G3 developed this weird mark on the screen (always visible when the screen is on), and she claims to have never done anything like drop it in the tub or toilet... but it appears to be water damage to me. (See pic attached)
I put it in rice for a few weeks, and it's not going away... so I'm ready to try to fix it. Has anyone seen anything like this? Since the glass is still in good shape (it wasn't dropped or cracked)... what do I need to order to fix it?
I had the same concerns as the OP... buying a replacement LCD panel from Amazon or eBay, I wasn't sure if I'd get a full-res OEM replacement or a cheap knock-off. Can anyone point me to a reliable reseller (preferably on Amazon for several reasons) that would have the right parts to fix her phone up?
Thanks
The crack you see is in a tempered glass screen protector... not the screen itself.
Hai guys,
I have broken my glass on g3, display works fine but shuttered portion of screen is not fully functional, please can someone point me to reliable reseller, preferable on eBay, cos don't want to trash my money on knock-offs, I wanna real deal 100% OEM original display. So I need you guys from personal experience to point me in the right direction. Thx in advance!
Thought id post here about my Xperia Z3 and how things went from great to worse. Bought the phone last November here in Finland and was a happy little peasant with a brand new phone. Loved the phone but quite early on I think i managed to break the back glass myself (?). I didn't drop it, it just cracked... The phone was denied warranty back then due to mechanical preassure (saying it's my own fault it cracked). Well that was no biggie as it was just the back cover and it didn't make hte usability of the phone any worse than it was. And it may as well be that I've broken it myself, not being carefull enough. Picture #1, #2, #3. Sorry for the poor quality, but as you can see there's no damage on the sides indicating it being dropped, but still it could be my own fault.
Fast forward half a year and I noticed that my phone had a yellow tint on it's display right next to the micro-usb port. I took the phone for warranty and waited a few weeks. The local service company denied warranty due to improper use of the device quoting the phone being bent, cracked rear cover and the LCD screen glue being broken. I was really surprised and I hadn't noticed the bending or the glueing being an issue. Received the pictures and it indeed was bent and the lcd screen glue was torn. Still, the phone wasn't mishandled in any way, well it did drop a few times but nothing major.
Pictures from the service: #1, #2, #3, #4, #5
Well there's no denying those pictures. To be honest, I would have expected the phone to not bend (keep it in my front pocket) and havn't taken the phone with me to sports or anything like that. So my phone was denied warranty as all damage to the phone was not due to poor build quality but to improper usage of the device. Took the phone to my local reseller where I bought the phone for consumer complaint as I couldn't have in any way be held accountable for the LCD screen defect or the poor glue. Bending ok, mayby... but still think this is a little bit far fetched and the rear cover i can definately be held accountable for. But the screen? Really? The service center said that the phone would need to be replaced completely. Sony official response was that it's not due to build quality issues but to damage caused by improper use of the device. They stood behind the service center and device is officially out of warranty now.
Well I did order spare parts and replace the LCD screen glue myself, and the back cover was held tight but the LCD screen wasn't. I managed to almost pull out the complete screen without heating it up first. As a result the glue came off in a wierd way as seen in the picture here. I really doubt the way the screen was glued could be my fault and has to be an manufacturing error.
Anyway, this is my story with my Xperia Z3 phone. Now i'm stuck with a faulty LCD screen that has burnt yellow tint close to the micro-usb port and it's a really ****ty way to keep the phone for another 12 months or so untill it's paid off (24months payment). Here's the gallery with all the pictures link.
TL: DR: Phone denied warranty (yellow tint on LCD, LCD gluing broken, bent phone and cracked rear glass. Last two might be my fault, but the first two couldn't be. Warranty service and Sony claim i've caused all damange to phone. Can't say i agree
they are right... NO ONE would approve warranty when there is physical damage....
They always have to prove that the defect you want them to repair was caused by you. So physical damage is not always enough for them to reject a warranty repair.
In this case, however, I can easily imagine both defects being caused by you bending the phone, so I'm not that surprised they denied your claim...
Whatever. I spent ~$160 fixing my phone. Both sides glass broken and phone unusable. Under std warranty (bought through expansys-usa.com) sent to sony/texas, waited about 3 weeks (forever) and rcvd a brand new phone back. Back is once again cracked. I will say this. Unless a proper case comes out, I won't be buying any more sonys. The best hard case now is the lovemei ($35) imo. Carrying case? Maxpedition TC-2. With a lovemei case get a TC-3.
I have the Z3 since it came out, bought it right at release. Only use a soft case, always have it in my front pocket. It's with me when I ride my bike and I took pictures of the kids in the water. So far no issues, except two bright spots in the lower part of the screen. So far I've been too lazy to get it repaired/exchanged.
Same for me too. 5 months old and its the 3rd time I sent it to Sony because of warranty.
Screen cracked for no reason.
The reasons before were Bluetooth not working and battery dieing.
Definitely my last Sony.
Cozmos23 said:
Same for me too. 5 months old and its the 3rd time I sent it to Sony because of warranty.
Screen cracked for no reason.
The reasons before were Bluetooth not working and battery dieing.
Definitely my last Sony.
Click to expand...
Click to collapse
Screen cracked for no reason, strange...maybe it is not cracked at all...maybe you have some sort of hallucination when you look at it, and it happens only to you and only when you look at it...
EDIT: OP - first two faults are caused by your abuse...so I don't see any point of this thread...
No front or back cracks or damage for me yet. I got mine back in March and installed tempered glass on the front which I broke the other day. The only issue I have is yellowing around the soft keys caused by me I think. Front pocket and I basically do parkour at work as a residential window cleaner I jump a lot of gates and fences everyday. To be perfectly honest I'm surprised the phone is still in 100% condition on the outside. [emoji12]
EDIT: OP - first two faults are caused by your abuse...so I don't see any point of this thread...
The point was that they pinned all of the damage on me and claimed I was responsible for the poor glue used with the LCD screen and the screen errors as well while I could in no way have done that damage by using the device. And I really doubt a cracked back cover and the slight bending could cause either of the problems with the screen. The idea was to share how it went down and perhaps to be of use to someone. Seems though it won’t be so let this post be buried.
Sure I’m a little bit surprised a device could even bend and thought it was just something that would happen if deliberately done. Never had that with any previous phone from any manufacturer. I will buy smaller phones next time or sturdier ones so I can keep them with me. Not saying it’s a common problem as it surely isn’t, just going to make different desisions in the future.
Hi. This happened a while ago but I finally have the time to deal with my poor Nexus 6p. It spent a few minutes in a hot tub a few months back. Rice for more than 48 hours - nothing. Brought it to Staples where they put it in the machine that heats the gel balls (?) to remove the moisture. Charged it for a few minutes there and it actually turned on! Awesome, except the touch screen doesn't work. Battery seems to hold a charge, screen turns on and looks fine, volume and power buttons work, and I couldn't figure a way to test the fingerprint scanner or camera. Factory reset it. So now the phone is stuck to booting to the options menu with recovery mode and all that.
Is it possible to determine or guess what is wrong from this information? I've looked at the teardown, and I'd assume there is an issue with the pressure sensor, but I don't know enough about phone construction and parts to know if it's the sensor, or the part that connects the sensor to the screen, or something completely different.
I wanted to get some advice on what to do from here. Other than tossing it or leaving it forever, I have three options:
1. Repair shop: This seems like the easiest option, but potentially expensive enough that I'd be better off getting a whole new phone instead. Would a diagnosis be a separate process/transaction than the actual repair service? There are a few nearby shops for me to check out.
2. Fix it myself: The 6P seems like a pain in the ass to take apart and put back together (2/10 repairability score). I don't think it's beyond my ability, but the time and risk that it involves for me to do it myself makes me very hesitant. I also don't know exactly what I'll find inside the phone.
3. Sell it: Sell for parts and buy a new phone. If it comes to this, I need to know what I should expect to get for it. It's good hardware, and the parts that still work seem in good shape.
I wanted to consult the internet before going any further. So, how boned is my phone? Any different suggestions? Thanks for reading and I appreciate any advice.
eak.the.human. said:
Hi. This happened a while ago but I finally have the time to deal with my poor Nexus 6p. It spent a few minutes in a hot tub a few months back. Rice for more than 48 hours - nothing. Brought it to Staples where they put it in the machine that heats the gel balls (?) to remove the moisture. Charged it for a few minutes there and it actually turned on! Awesome, except the touch screen doesn't work. Battery seems to hold a charge, screen turns on and looks fine, volume and power buttons work, and I couldn't figure a way to test the fingerprint scanner or camera. Factory reset it. So now the phone is stuck to booting to the options menu with recovery mode and all that.
Is it possible to determine or guess what is wrong from this information? I've looked at the teardown, and I'd assume there is an issue with the pressure sensor, but I don't know enough about phone construction and parts to know if it's the sensor, or the part that connects the sensor to the screen, or something completely different.
I wanted to get some advice on what to do from here. Other than tossing it or leaving it forever, I have three options:
1. Repair shop: This seems like the easiest option, but potentially expensive enough that I'd be better off getting a whole new phone instead. Would a diagnosis be a separate process/transaction than the actual repair service? There are a few nearby shops for me to check out.
2. Fix it myself: The 6P seems like a pain in the ass to take apart and put back together (2/10 repairability score). I don't think it's beyond my ability, but the time and risk that it involves for me to do it myself makes me very hesitant. I also don't know exactly what I'll find inside the phone.
3. Sell it: Sell for parts and buy a new phone. If it comes to this, I need to know what I should expect to get for it. It's good hardware, and the parts that still work seem in good shape.
I wanted to consult the internet before going any further. So, how boned is my phone? Any different suggestions? Thanks for reading and I appreciate any advice.
Click to expand...
Click to collapse
You could flash the factory image but I guess you still wouldn't get past the setup screen without touch. I've been repairing electronics for 10+ years and if it came into my work I would disassemble it and look for obvious signs of damage/corrosion at the screen/digitizer connections, and look for track marks on the motherboard where a short could have occurred, or blown fuses/resisitors/diodes for the digitizer. Beyond that it's really a matter of swapping in a screen assembly (we have cracked glass 6p lcd assemblies that would work fine as a test unit). If that doesn't fix it, I'd order a main board. Having said that, it's not a phone I would want to own or even repair for a customer without telling them about the potential for future issues from the water damage. PM me if you want to sell it cheap for parts.
Screen and digitizer assembly is 'only' $60 - $80 on ebay or ali. So that is worth the risk. If this is not the problem you can sell it again for the same price, so no money loss here.
Waiting a few months though, is a long time to wait to dry your electronic devices. When it happens the best is to take it apart immediately to avoid corrosion.
The 6P is not easy to take apart, but it is do-able. Hardest part is the glass on the back. But if it cracks, a replacement will cost you less then 10 bucks.
What I would do is order the screen, take the phone fully apart, if there is a lot of corrosion, wash the mainboard in a contact cleaner (or if you don't have this, wd40 could work) then wash it with alcohol (to remove the wd40) and let it dry. Assemble the phone with the new screen, and hopefully it works. This way I fixed an Oneplus One 6 months ago, and it is still running perfectly.
To add a bit of clarification - use 99% USP Isopropyl Alcohol. It shouldn't be more than five bucks at your local pharmacy (Shoppers Drug Mart in Canada sells it for $1.99 for 500mL).
While using the 75% USP won't cause any serious issues, it is diluted with water, as it's more of an antiseptic (I can explain why 75% is better for wound cleansing than 99% if anyone wishes), and you'd just be prolonging the drying/repair process.
Use a lint-free cloth to dab the components - keep it away from the battery terminals on the battery itself. It is OK to clean the connecting terminals on the motherboard though. There are sandwich clips all over the LCD/motherboard, so be extra careful dabbing the cloth in there - one bent pin in any of those clips and your phone will need to be sent away for repair by a specialist.
DO NOT POUR IT ALL OVER THE COMPONENTS OR LEAVE IT SOAKING IN ANY AMOUNT OF ALCOHOL.