Hello,
Unfortunately, I have Cyanogenmod on my Galaxy S4 GT-I9505 (in UK on O2). I want to unlock the phone, which apparently involves going back to a stock ROM.
After much searching around, I've eventually managed to download a stock ROM that wasn't corrupt, and Odin, and USB drivers. But when I try to do the firmware upgrade thing, it fails. I now seem to have a brick. How I hate Cyanogenmod!
Here's what happens in Odin:
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
...and all I get on the screen of my phone is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". Except I can't use Kies (or Smartswitch) because it's a stupid Cyanogenmod phone so Kies (or Smartswitch) doesn't recognise its existence! GRRRRR!
So, do I have a brick that is completely useless? I've only had this phone a month or so (I bought it, tragically, with cyanogenmod on it).
Any suggestions/help/sympathy would be GREATLY appreciated! (please!)
- Paul
hellopaul said:
Hello,
Unfortunately, I have Cyanogenmod on my Galaxy S4 GT-I9505 (in UK on O2). I want to unlock the phone, which apparently involves going back to a stock ROM.
After much searching around, I've eventually managed to download a stock ROM that wasn't corrupt, and Odin, and USB drivers. But when I try to do the firmware upgrade thing, it fails. I now seem to have a brick. How I hate Cyanogenmod!
Here's what happens in Odin:
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
...and all I get on the screen of my phone is "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". Except I can't use Kies (or Smartswitch) because it's a stupid Cyanogenmod phone so Kies (or Smartswitch) doesn't recognise its existence! GRRRRR!
So, do I have a brick that is completely useless? I've only had this phone a month or so (I bought it, tragically, with cyanogenmod on it).
Any suggestions/help/sympathy would be GREATLY appreciated! (please!)
- Paul
Click to expand...
Click to collapse
It has nothing to do with Cyanogenmod all your problems. You are putting the blame in the wrong corner. Kies not recognizing, the failure of the flash, not being sim-unlock has nothing to do with Cyanogenmod. But with you not reading enough.
You want to flash a 4.2.2 rom and you can only do that if you are not on a knox bootloader. What is the text when you boot in download mode?
And btw, as far as I know you don't need to downgrade your FIRMWARE, but only your MODEM.
Thanks for your quick reply!
Lennyz1988 said:
You want to flash a 4.2.2 rom and you can only do that if you are not on a knox bootloader. What is the text when you boot in download mode?
Click to expand...
Click to collapse
Here's the text:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
And btw, as far as I know you don't need to downgrade your FIRMWARE, but only your MODEM.
Click to expand...
Click to collapse
Is that an easier process?
I was using Android 5.0.2 with Cyanagenmod. I'm not sure what version the ROM I downloaded was - it actually downloaded and wasn't a corrupt .zip file, which seems to be a very very rare thing. Might attempting to install a 4.x.x firmware over a 5.x.x cause problems? Is there anywhere I can reliably download a 5.x.x ROM that actually works? I've wasted several days searching for a UK O2 ROM. I can recommend plenty of sites that CLAIM to have it, but it's corrupted or just doesn't download due to any number of errors.
hellopaul said:
Thanks for your quick reply!
Here's the text:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
Is that an easier process?
I was using Android 5.0.2 with Cyanagenmod. I'm not sure what version the ROM I downloaded was - it actually downloaded and wasn't a corrupt .zip file, which seems to be a very very rare thing. Might attempting to install a 4.x.x firmware over a 5.x.x cause problems? Is there anywhere I can reliably download a 5.x.x ROM that actually works? I've wasted several days searching for a UK O2 ROM. I can recommend plenty of sites that CLAIM to have it, but it's corrupted or just doesn't download due to any number of errors.
Click to expand...
Click to collapse
Here an whole post with firmwares.
http://forum.xda-developers.com/showpost.php?p=41072392&postcount=2
Try flashing a 4.4.2. firmware. If flash is succesfull, then downgrade modem to 4.2.2.
If it's not, then pick an 5.0.1 firmware and downgrade modem to 4.2.2.
4.2.2 modem:
http://d-h.st/CXx
When you are done with what you want to do ( I assume something with region away). Flash AGAIN the 4.4.2 firmware or 5.01. You cannot stay on the 4.2.2 modem.
Thank you for your help with this!
I managed to un-brick my phone (hooray!) using 'Philz Touch' and some of the advice here: http://forum.xda-developers.com/galaxy-s4/general/guide-t3018625
I just re-downloaded that firmware from the site you suggested - that's where I managed to download the (exact same) firmware before. I've just tried installing it again, but got exactly the same error in Odin. I've currently got another ROM downloading from one of the dodgy 'teenage-hacker' sites (Rapidgator.net). I assume that it won't even unzip, but it will be tomorrow before it's completed the download.
I'm guessing that I need to download firmware that's UK and O2 (I'm in the UK and my phone's locked to O2). This rather limits my options - there only seem to be a couple of places on the net with this ROM (neither of which work). If I installed, say, a Vodafone ROM, then unlocked the phone, should that (in theory) then work with my O2 (or any other) SIM? I plan to switch to BT Mobile (running on the EE network) shortly - hence wanting to unlock the phone.
hellopaul said:
Thank you for your help with this!
I managed to un-brick my phone (hooray!) using 'Philz Touch' and some of the advice here: http://forum.xda-developers.com/galaxy-s4/general/guide-t3018625
I just re-downloaded that firmware from the site you suggested - that's where I managed to download the (exact same) firmware before. I've just tried installing it again, but got exactly the same error in Odin. I've currently got another ROM downloading from one of the dodgy 'teenage-hacker' sites (Rapidgator.net). I assume that it won't even unzip, but it will be tomorrow before it's completed the download.
I'm guessing that I need to download firmware that's UK and O2 (I'm in the UK and my phone's locked to O2). This rather limits my options - there only seem to be a couple of places on the net with this ROM (neither of which work). If I installed, say, a Vodafone ROM, then unlocked the phone, should that (in theory) then work with my O2 (or any other) SIM? I plan to switch to BT Mobile (running on the EE network) shortly - hence wanting to unlock the phone.
Click to expand...
Click to collapse
You are not reading what I wrote. You CANNOT flash the firmware you tried before. It's impossible because that version is to old. You are downloading a 4.2.2 and you need need 4.4.2 minimal (possible even 5.0.1 minimum).
I have no way of telling which version that firmware was - it was listed under United Kingdom and had O2 in the filename. No version number.
So - back to my previous question - should I be able to use, say, a Vodafone 4.4.2 firmware without risk of bricking my phone? Or maybe the BTU 5.0.1 version? And then be able to do the standard Samsung S4 process to unlock it? I guess I'll just try it and see if it works.
No. You need to download the latest ROM for your carrier, here. Once you have installed that firmware, you must install through Odin a 4.2.2 modem found at the link Lennyz1988 provided. Only then can you use the service menu method or RegionLock Away to unlock the S4. After that, extract the modem from the firmware package you downloaded and flash it through Odin.
Honestly, spend the money and unlock the phone, if O2 won't do it. An unlock code is virtually guaranteed to work, unlike the unlock methods in the forums.
Unfortunately that firmware you linked to is one of the many corrupt .zip files out there, and will not decompress at all.
I've got another firmware downloading (very very slowly) from Rapidgator. It will probably also be corrupt.
I've called a couple of local phone unlocking shops, and they don't have a clue what Cyanagenmod is, and whether it will affect the unlockability of the phone. I'll just pay an ebayer to give me an unlock code, in the hope that it might unlock it, despite what I've read. Most people say I must go back to a stock ROM before unlocking.
Ugh. Awful Cyanogenmod.
hellopaul said:
Unfortunately that firmware you linked to is one of the many corrupt .zip files out there, and will not decompress at all.
I've got another firmware downloading (very very slowly) from Rapidgator. It will probably also be corrupt.
I've called a couple of local phone unlocking shops, and they don't have a clue what Cyanagenmod is, and whether it will affect the unlockability of the phone. I'll just pay an ebayer to give me an unlock code, in the hope that it might unlock it, despite what I've read. Most people say I must go back to a stock ROM before unlocking.
Ugh. Awful Cyanogenmod.
Click to expand...
Click to collapse
The archives are not corrupt. Something is wrong at your end.
And again, CM has nothing to do with your issues. If you were on the stock rom you would just have had the same problem.
If I was on a stock ROM I wouldn't have to go through all this, and could presumably just unlock my phone very easily, as outlined on many sites, such as giffgaff (I cannot post links in this forum yet).
I cannot get that ROM to unzip, using 7-zip, WinRAR, Mac OS X Finder, Mac OS X Terminal. I've downloaded it at least 3 times, and it's always corrupt. Mac OS X Terminal reports "bad zipfile offset (local header sig): 0".
Uh?? Update: I've just tried 7-zip again...and it's decompressed it! How utterly bizarre.
I just tried it with Odin and it did not work - the usual result:
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I have to turn off the phone, and use Philz Touch to bring it back to life.
hellopaul said:
If I was on a stock ROM I wouldn't have to go through all this, and could presumably just unlock my phone very easily, as outlined on many sites, such as giffgaff (I cannot post links in this forum yet).
I cannot get that ROM to unzip, using 7-zip, WinRAR, Mac OS X Finder, Mac OS X Terminal. I've downloaded it at least 3 times, and it's always corrupt. Mac OS X Terminal reports "bad zipfile offset (local header sig): 0".
Uh?? Update: I've just tried 7-zip again...and it's decompressed it! How utterly bizarre.
I just tried it with Odin and it did not work - the usual result:
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I have to turn off the phone, and use Philz Touch to bring it back to life.
Click to expand...
Click to collapse
Yes ofcourse it fails. You are not following my instructions.
You are flashing a 4.3 rom which is IMPOSSIBLE for you. Your bootloader is at least a 4.4.2 version, probably even a 5.0.1 version. So you can only flash those stock roms.
Lennyz1988 said:
Yes ofcourse it fails. You are not following my instructions.
You are flashing a 4.3 rom which is IMPOSSIBLE for you. Your bootloader is at least a 4.4.2 version, probably even a 5.0.1 version. So you can only flash those stock roms.
Click to expand...
Click to collapse
Sorry if I'm not following you. How can you tell what version the firmware file is? The site I downloaded it from claimed it was 5.0.1.
My phone's Android version is 5.0.2
I've been putting the firmware file into Odin's AP slot.
I haven't done anything with the BL (presumably bootloader) slot.
Isn't there a way I can completely wipe the phone, then install whatever firmware I want, regardless of what was previously installed?
alright let's try something else.
Flash this rom with Philz. Perform a full wipe first form within the recovery.
http://forum.xda-developers.com/showthread.php?t=2283194
It's a 4.4.2.
Then flash a 4.2.2. modem and then try the things you want to do.
So I guessed that I should copy the .zip file of that WanamLite Rom onto the SD card, which I did.
I then did:
Recovery mode reboot, and booted into the Philz thing.
Wipe Data/Factory Reset.
Install Zip > Choose zip from /storage/sdcard1, and located the .zip file...
Installing...
Finding update package...
Installing update...
Welcom to WanamLite XXUGNH7 3.1
Formatting system...
System mounted!
data mounted!
Cleaning cache...
Installing system...
Symlinking...
Setting permissions...
set_metadata: some changes failed
E:Error in /storage/sdcard1/GT-I9505_WanamLite.XXUGNH7.V3.1.NO-WIPE.zip
(Status 7)
Installation aborted.
press any key to continue.
So now I'm wondering how to get around a Status 7 error. Searching that forum thread about Wanamlite gives no help - at least not in a language a human can understand. Someone suggested:
"after spending several hours on this ... i made it
How to flash this ROM on old NON-Knox bootloader:
1. flash XXUEMJ5 modem via odin to prevent lags and call problems
2. flash a TWRP recovery to bypass the "status code 7"-error while flashing this ROM
3. flash this ROM
4. install your prefered recovery"
I have absolutely no idea what any of that that means.
I have rebooted the phone, and it will only boot into the Philz thing - presumably because there is no operational firmware installed at all.
Partial success:
I followed the instructions given here: https://www.youtube.com/watch?v=np_nlFALMbQ
...to install firmware via PhilZ Touch, and I can successfully install Cyanogenmod (argh!) or WanamLite (yeah!). But I still cannot access the service menu in WanamLite. At least typing *#0011# does get some kind of menu up, but not the ServiceMode main menu.
And at least I now have a fully operational phone (with WanamLite), but still locked to O2.
Lennyz1988 suggested I "flash a 4.2.2. modem" - might doing that unlock the ServiceMode menu? Are those at all related? To flash the modem (presumably using Odin) which slot do I put it in? CSC?
I tried installing the O2 UK firmware using the exact same technique, using both the ROMs I downloaded, but neither would work. It failed at the very start, saying [bad]. I then reinstalled WanamLite successfully.
It wasn't just Lenny who mentioned flashing the 4.2.2 modem. I mentioned it as well. In fact, in the thread on the topic - which you really should be reading - the last few pages are peppered with posts from me telling people that you have to downgrade the modem (at minimum) before you can use either unlock method. For the record, I know downgrading works, because I had to do it myself after losing a SIM unlock that was done through the service menu. I ended up using RegionLock Away and couldn't be happier.
With that said, you cannot use a custom ROM of any kind to perform the unlock. I tried accessing the service menu on Imperium ROM, which is based on stock, and failed. You must be completely stock, which means you need to install a stock ROM to your device, using Odin. Download a new copy of the ROM, and if necessary use a totally different computer. Just one question however. If flashing the ROM through Odin doesn't work this time, will you then blame WanamLite for it?
Thank you for all your help with this, Strephon and Lennyz1988.
So, I tried flashing the modem (I put this file: I9505ZHUFNB3_MODEM.tar into Odin's CP slot - it seemed to work). I rebooted and tried to get to the service menu, but as Strephon predicted, there was no service menu.
So, again using Odin, I tried to put this firmware (I think it might be 4.2.2) on the phone:
I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5
...and, predictably, it failed.
So then I tried doing them both at the same time, with the modem file in the CP and the firmware in the AP slot. But it failed again:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried to re-install the various other stock ROMs I'd downloaded (and re-downloaded, on a different computer), with no success.
So, I got back in touch with O2 - they'd previously said they wouldn't unlock the phone because they say the phone and number need to have been used together for 12 months. I only bought the phone about 6 weeks ago. But after much pleading (and £15) they've agreed to send me an unlock code! So when this arrives, I'll try it out (the phone is currently still running WanamLite) and see if it works. If not, to save my sanity, I'll just cut my losses and sell/give away the bloody phone as "locked (forever) to O2, with WanamLite or Cyanogenmod".
And no - I don't blame WanamLite (or Cyanogenmod now) for the stock ROM installations working - I can only assume that there's a problem with the ROMs. I can install WanamLite and Cyanogenmod fine, and it just so happens that they're not downloaded from some dark, dodgy server, unlike most of the supposedly stock ROMs. It's just really annoying that the phone's previous owner thought it was a good idea to install Cyanogenmod in the first place, without first unlocking the phone.
It's only annoying because the phone wasn't unlocked beforehand, meaning you have to put the stock ROM on the device in the first place to be able to unlock it using those methods. I can understand that. However, you still have the issue of why Odin keeps on failing when you try running it. That's one that perplexes me as I've had no issues with Odin whatsoever.
Well, my problems are over! O2 have already emailed me an unlocking code which WORKED! I now have an unlocked phone. I'm still interested in tweaking it, so may well install a more interesting firmware in future.
Thanks for your help and suggestions!
Related
i will tell all the information here..i have my samsung gt-i9505 carrier locked to globe telecom here in the philippines..
i tried to factory unlock here http://forum.xda-developers.com/showthread.php?t=2282683 but i have no luck on it..i have change my baseband several time via odin but still i pin request always shows after i reboot..i have android version 4.2.2, stock firmware DXUBMF8.
so i stopped from there..i moved on to try to root my s4,before having this phone i had owned a s4 factory unlock and i have had rooted it but i already forgot how to do it again..so started anew by looking again at forum threads,i have tried omega custom rom but if i goes to recovery mode my screen only shows the following options: reboot system now, apply update from ADB, apply update from external storage, wipe data/factory reset, wipe cache partition, apply update cache..my question here was,is this the default recovery mode of s4 now?because i can still recall that my last s4's default recovery menu shows with advance option with wipe dalvik cache etc..and my recovery menu now shows no apply update from internal storage..when i tried flashing the custom rom save on my sd card: apply update>omega*something*.zip..it all well done but after rebooting my phone didn't any stuff from that custom rom nor rooted at all..can you help me solving this?
and lastly this is my main problem now,i searched again the thread and went down to this thread http://forum.xda-developers.com/showthread.php?t=2250824 i downloaded the pre-rooted rom XXUBMF8..flashed it with odin PDA..passed and from then my phone was stocked every time i reboot to samsung logo..
i have tried to flash again on a stocked rom. odin>PHONE>(the stock rom)>start>passed then reboot it still stocked to samsung logo..
sorry this was too long to read but i have to tell what all i have been done resulting to this..can someone help me..i will be very thanful for your help..
can anyone help me with this?i have been searching the forum for hours..i have done flashing through odin with stock rom and pit file but it ended up failed..done factory reset with default recovery mode but nothing happens still stucked on boot logo..
still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.
voidjov said:
still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.
Click to expand...
Click to collapse
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info
did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom
TingTingin said:
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info
Click to expand...
Click to collapse
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
daibaron said:
did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom
Click to expand...
Click to collapse
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..
voidjov said:
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..
Click to expand...
Click to collapse
In the Thread you point out... read AGAIN about PIT
http://forum.xda-developers.com/showthread.php?t=2265477
Download the PIT and follow the exact procedure... it's not like flashing a new firmware so read which boxes you check
Try the PIT file with / without the firmware
check also this thread... in case you have a pit related error.
http://forum.xda-developers.com/showthread.php?t=2283919
I'm sure you have all you need to recover your phone.
When you will have recovered your phone, update this thread saying you solved your problem.
check also this thread... in case you have a pit related error.
OH, don't forget to update my thanks counter
Hello,
I saw an answer to this problem in another thread. You have to swipe the phone by starting it with VOLUME UP + HOME + POWER, and then whatever options you have to swipe everything.
Problem SOLVED!!!
hey guys i have solved my greatest problem since i started rooting back on my N7100,my 1st s4 and now my new s4..
thank you for all who helped me,after more than 24hours of reading and waiting for you replies and doing some intervention on my s4,i have recover it..i will post here how i did it for reference for others who might encounter this problem same as mine:
first of all i have noticed this just after successfully revived my phone, you have to WIPE THE DATA/FACTORY REFORMAT via recovery mode before and after doing any firmware update,then i just removed my battery may be a minute and put it back again every time i do flashing..
i used odin version 1.85 not version 3.04..i first chose the pit file and flash it.(when i tried flashing the pit and stock rom together it always ended up to fail)..so i decided to chose to flash the pit file only using odin v1.85(it automatically ticked the "repartition option on this odin version" then it passed..after that as i have said remove battery,wipe data,then i removed again the battery,then put it back and do download/odin mode on my phone,then i flashed stock rom from www.sammoble.com, i searched for globe carrier since my phone was locked on that carrier, then after 2-3minutes(be patient and don't do anything while waiting) my phone backed to life!!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OLBBMF8_I9505DXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
for those guys who helped me, i have pressed the thanks button for you guys 100x(i hope i can do that)..but truly i am very much thankful for you guys..i do not have to go to service provider technician or any cellphone repair stall just to repair my phone and pay,i have revived it with your help..THANK YOU!!!
i must add i would like to ask what is the best way to root my phone, i have read chainfire autoroot, is the best way to root my phone?as i can remember it is the same way i have rooted my first s4 two months ago because i saw my old folder here on my pc with that application..and best custom rom?
and the best way to factory unlock my phone, the working firmware..
you can post the link so i can read and do it myself..
I'm trying to flash an updated modem on my i337M which is running a custom DANDVH-GE-4.4.2-01162014-INTNL-STOCK.ZIP which is a Google Play work alike. I am trying to change the modem because it keeps droping the data connection and will only stay stable in 2G mode. Right now its modem is on AMDJ. I've tried to flash both the XXUEMKF, XXUFNA1, modems but I keep getting the following error:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1
I'm adding the modem.bin to the CP portion of Odin 3.09. I've tried doing this on all my USB ports using two new cables (all w/ the updated samsung drivers). I am using Win 8.1. All the same results. My phone says:
Code:
Odin Mode
Product name: SGH-I337M
Current Binary: Samsung Official
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Then when I start flashing the following to messages appear right under the write protection message:
Code:
Start [224, 1440]
Secure Check Fail: mdm
After doing this I have to restart the phone for odin to pick it up again. It boots fine normally, and the original AMDJ modem still shows.
What's going on with this? I've looked in our forums but I can't find anything. I have TWRP installed, and I am rooted.
AHLASSICH said:
I'm trying to flash an updated modem on my i337M which is running a custom DANDVH-GE-4.4.2-01162014-INTNL-STOCK.ZIP which is a Google Play work alike. I am trying to change the modem because it keeps droping the data connection and will only stay stable in 2G mode. Right now its modem is on AMDJ. I've tried to flash both the XXUEMKF, XXUFNA1, modems but I keep getting the following error:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1
I'm adding the modem.bin to the CP portion of Odin 3.09. I've tried doing this on all my USB ports using two new cables (all w/ the updated samsung drivers). I am using Win 8.1. All the same results. My phone says:
Code:
Odin Mode
Product name: SGH-I337M
Current Binary: Samsung Official
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Then when I start flashing the following to messages appear right under the write protection message:
Code:
Start [224, 1440]
Secure Check Fail: mdm
After doing this I have to restart the phone for odin to pick it up again. It boots fine normally, and the original AMDJ modem still shows.
What's going on with this? I've looked in our forums but I can't find anything. I have TWRP installed, and I am rooted.
Click to expand...
Click to collapse
Hey there, I'm trying to update my I337M's modem as well (I have a post in this forum) so I'm in the same boat as you. From the looks of it, it seems like you're not using the correct modem firmware. If you'd want to update I believe it's something like UMUEMK6 for our phones, I've tried looking around and I can't find it anywhere. Hopefully that offers some direction but I'm waiting to see as well since I'm having the same problem with Google ROMs as well (The data signal never works).
Hello once again,
After a bit of work, I managed to update the modem on my phone to MUMUEMK6 (which is the newest baseband version for the I337M). Since flashing the modem firmware, I've re-installed Danvdh-GE-4.4.2-01232014b.zip and I haven't had a problem since, works without a hitch. What you need is this file which I've RARd up for you :
(Sorry, I have to obfuscate the URL since I'm a new user on these forums, just replace *dot* with a dot)
rtigue *dot* ca/files/SGH-I337M_MK6 *dot* rar
Once you've downloaded the file, simply just boot your phone in ODIN mode, open up ODIN, add the 'modem.bin' to the Phone section in ODIN and click Start. Wait a few moments and after that you should be good to go.
Let me know if anything comes up
For some reason, yours is the only version of the mk6 modem file that worked for my i337m after I was on 4.3 GE and went to old MDJ modem to try sim unlock. Which didn't work, sigh... Thanks!
SimonPalmieri said:
Hello once again,
After a bit of work, I managed to update the modem on my phone to MUMUEMK6 (which is the newest baseband version for the I337M). Since flashing the modem firmware, I've re-installed Danvdh-GE-4.4.2-01232014b.zip and I haven't had a problem since, works without a hitch. What you need is this file which I've RARd up for you :
(Sorry, I have to obfuscate the URL since I'm a new user on these forums, just replace *dot* with a dot)
rtigue *dot* ca/files/SGH-I337M_MK6 *dot* rar
Once you've downloaded the file, simply just boot your phone in ODIN mode, open up ODIN, add the 'modem.bin' to the Phone section in ODIN and click Start. Wait a few moments and after that you should be good to go.
Let me know if anything comes up
Click to expand...
Click to collapse
@ SimonPalmieri
Hello. I'm also running a rooted i337m (Bell) with 4.2.2 i337mvluamg1 stock rom.
Please let me know if the new modem MUMUEMK6 changes the bootloader with KNOX integrated.
Thanks.
jk2rd said:
@ SimonPalmieri
Hello. I'm also running a rooted i337m (Bell) with 4.2.2 i337mvluamg1 stock rom.
Please let me know if the new modem MUMUEMK6 changes the bootloader with KNOX integrated.
Thanks.
Click to expand...
Click to collapse
Bootloader and modem are not tied together..... MK6 is the latest modem and works with 4.4.2 roms (for I337M), once the actual 4.4.2 update drops for i337m we will be able to update to that modem.
Thanks for replying Gage_Hero.
So I'm then assuming that it's NOT a good idea to flash the mk6 modem.bin on my current rom?
MK6
jk2rd said:
Thanks for replying Gage_Hero.
So I'm then assuming that it's NOT a good idea to flash the mk6 modem.bin on my current rom?
Click to expand...
Click to collapse
First you need to decide if you want to sim unlock the phone, still possible on mvluamg1, not possible on MK6. I would make sure you have a copy of modem.bin for mvluamg1 first, just incase. Then flash the MK6, I run MK6 on 4.4.2 GErom since we don't have a kitkat modem for i337m yet... once there is I will be updating.....
PS if you can find files that have md5 checksum, that is always good because then you can check the file to make sure it is complete. I had that issue flashing the MK6 modem, first file I downloaded failed in Odin, plus it had no md5 for me to check. Second one I donwloaded had the md5, which I checked and it flashed perfectly....
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Anybody? I need my phone back :S
chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.
If u can boot to recovery flash a custom rom then flash stock via odin
aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...
Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error
chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.
navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.
I think u should try flashing some other stock firmware I hav had the prblm before
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
It should work I did the same thing but cant say anything
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.
spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app
lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.
*****************Thread can be closed as issue has been resolved*****************
I think I have soft bricked my phone.
I tried this tutorial and everything went according to the instructions except that the wifi couldn't be turned on.
So I opened a thread asking for help regarding my wifi, I was advised to flash a custom ROM (Android 5.0.1 Lollipop SDK 21) thru TWRP but I must have done something wrong because the phone was stuck in Android System Recovery.
Then I was advised to flash the original firmware thru Odin (Android 4.2.2) and that's where I think the brick happened.
The phone can go into download mode but there is a gray line that says "Write protection: Enable" and everything I try to flash thru Odin gives the same fail error:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Urgent help is much appreciated as I have no other phone and I have been incommunicated for a week+ now
UPDATE:
I just tried to go into Android System Recovery just now it worked! I swear I wasn't able to. It says on top:
LRX22C.I337UCSGOK3 (I was on NB1, where could have this come from?)
And has a couple extra options I had never seen before (last 3 or 4 from the list:
reboot system now (tried it and gets stuck on Samsung logo)
apply update from ADB
apply update from external storage
apply update from cache
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
Enable cp logging
Disable cp logging
At the end of the recovery screen there are 2 lines in red:
failed to mount "/system" (Invalid Argument)
E: failed to mount /system (Invalid Argument)
What is the model # in download mode?
audit13 said:
What is the model # in download mode?
Click to expand...
Click to collapse
It says:
Product Name: SGH-I337
PS: Sorry I didn't specify because I thought this forum section was only that model.
The bootloader on the sgh-i337 is locked while the bootloader on the sgh-i337m is unlocked. which means you cannot flash TWRP or CWM to the sgh-i337.
Look here: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814 and note the following comments from that thread.
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+).
audit13 said:
The bootloader on the sgh-i337 is locked while the bootloader on the sgh-i337m is unlocked. which means you cannot flash TWRP or CWM to the sgh-i337.
Look here: https://forum.xda-developers.com/ga...-to-update-to-i337oc3-5-0-1-keeproot-t3075814 and note the following comments from that thread.
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery.
3. No need to wipe prior to flashing! The ROM will automatically perform a factory data reset.
4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+).
Click to expand...
Click to collapse
Mine is not the "M" version.
What am I supposed to get from those notes? Are you suggesting I follow the steps in that thread?
I'm not too technical, but I can follow steps.
If you are to unbrick you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+)
What bootloader are you on? Only the MDL bootloader can use the 4.2.2 Odin firmware.
audit13 said:
If you are to unbrick you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+)
Click to expand...
Click to collapse
I am on NB1, will try this tru Odin and will report back.
StoneyJSG said:
What bootloader are you on? Only the MDL bootloader can use the 4.2.2 Odin firmware.
Click to expand...
Click to collapse
Is the bootloader that one at the top of the Android System Recovery? If so, mine says:
LRX22C.I337UCSGOK3
audit13 said:
If you are to unbrick you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+)
Click to expand...
Click to collapse
It seems that I already had tried this because when I extracted the file it had to be replaced on my Desktop. Anyways I tried it again and it said the same thing:
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE:
Somehow I can go into recovery now and it says LRX22C.I337UCSGOK3 and unable to mount /system. Please refer to first post for complete info about this.
Publish the Odin log of possible.
You tried using different usb cables and usb ports?
audit13 said:
Publish the Odin log of possible.
You tried using different usb cables and usb ports?
Click to expand...
Click to collapse
I have successfully flashed stuff using this cable. I do swicth usb ports every time I get a fail just to make sure.
I really think the fail is due to the "Write Protection: Enabled" legend that appears on my screen as it wasn't there before and I was able to flash without mayor issues.
I'll try using a new cable now but I don't think I'll get a different result.
Will post the entire logs when I do.
Holy_Purple said:
I have successfully flashed stuff using this cable. I do swicth usb ports every time I get a fail just to make sure.
I really think the fail is due to the "Write Protection: Enabled" legend that appears on my screen as it wasn't there before and I was able to flash without mayor issues.
I'll try using a new cable now but I don't think I'll get a different result.
Will post the entire logs when I do.
Click to expand...
Click to collapse
OMG! I tried a new cable and it went thru!!! I cannot believe my eyes! and the wifi is working!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUFNB1_TWRootable_Full_Odin.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> non-hlos.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
You were on the OK3 bootloader. Now you're on the NB1 bootloader. You're stuck with using safe strap recovery and can only boot custom ROMs based on touchwiz as your bootloader is locked and can no longer be exploited with loki doki.
StoneyJSG said:
You were on the OK3 bootloader. Now you're on the NB1 bootloader. You're stuck with using safe strap recovery and can only boot custom ROMs based on touchwiz as your bootloader is locked and can no longer be exploited with loki doki.
Click to expand...
Click to collapse
Thanks for the info! I won't be messing with my phone any more, haha :victory:
Glad you got it fixed
I always have a few Samsung cables on hand for flashing.
Hello everyone,
I'm following this forum for mounths but just had chance to register.
I tried to root my phone, then I think something went wrong. Turned on the phone and used for a while, but had a fingerprint sensor error. After that I reboot the phone, but while showing the Samsung logo, I got "only official released binaries are allowed to be flashed" top of the screen. And phone was automaticly turning off after that.
Then I put the phone download mode and tried to install official firmware. Odin was failed.
I tried to flash bootloader only, and fail neither.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I thought maybe the stock rom that I trying to install is older. But now I can't open the TWRP with the buttons for the wipe data. The Samsung Galaxy logo views, after that it turns off.
Trying to install twrp again, Odin gives me fail too. Now I can only open the download mode.
I need my phone today urgently for contact with my colleagues.
Please ask me for the missing informations and please help me ASAP.. Sorry for my bad and complicated English..
Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at https://mega.nz/#!5Q4TATzQ!DT2OQO01KHfw7HsVNElZSfZ4DHoO9W99k3dJqfumMhg for s8 and at https://mega.nz/#!dMZ0zbDL!oYrcBh8DeOqMFeO9QObu8eNXVrjsajXICJ0o3MJPJ-o for s8+.
I also find a video for this issue at https://youtu.be/VTi3uBkpJic
Try this and reply back..
- ————————————
Or just try to flash the stock rom without the cm.bin/ bl firm.
memreb1801 said:
Try to flash an earlier Version of the bootloader maybe QF7.
I found the flashable odin archive at for s8+.
I also find a video for this issue at
Try this and reply back..
Click to expand...
Click to collapse
Thank you for helping but I tried these solutions allready. Now downloading another country's official rom from sammobile. I'm going to try this one but I have no hope
Good luck!!??
My solution did work. Download the latest firmware and install it with Odin. Thanks everyone anyway..