Related
Hi guys just wanted to ask for help from the expert porters.
I've been porting on my own this past weeks and my first try booted up well.
Tried another and still booted well.
But after sometime when I try porting again, it won't boot anymore.
It would pass the splash screen then after that would be BLACK SCREEN.
I'm just curious why this is happening when I did the same procedure I did with the other roms I ported and got it to boot well.
Hope someone could help me.
THANK YOU!
Please specify, which device's ROM were you porting and was it stock or CM7 based?
If it was CM7 based, I am sure there shouldn't be a problem porting it of you have read the guide correctly (rishabhraj one)
If it is stock based ROM of device other than S5830i, it can't be directly ported and you will have to add features and png manually to your device's framework
you must explain the "port" process you did,
what codes you reconfigured and binaries to get working,
I just copied the app,xbin,framework,font,media,lib,etc, and bin folders from port to base and edit buildprop. that's what I did with my first port and it booted well.. It was MIUI 3.4.5.. but when I'm trying to port the updated version, it won't boot anymore.
Take a log cat first
Hi, I need the ROM for this phone, more specifically, the boot.img file, as the current kernel is for the older, Indian revision of the On5, and my revision, the USA version SM-G550T1, seems not to have any copies of its firmware floating around. I'm running an OS for the SM-G550FY, which has no audio or camera support. Even if the version isn't an exact match, if you bought this phone in the USA, new, in 2016, your boot.img will probably work. I need this kernel guys. Please, if someone has an On5 in the USA, can I please get a copy of your boot.img and possibly system.img? I really care about the boot.img.
Thanks guys
-Subsentient
Firstly, did you try the updated ones at these locations:
http://www.theandroidsoul.com/galaxy-on5-stock-firmware-2-86761/
http://firmwarefile.com/samsung-sm-g550fy
Secondly, why exactly do you need the boot.img, what problem do you think it'll solve? Is there any specific issue with your current ROM that you are trying to solve?
Yes, I did, but as you can see, those are for the SM-G550FY, not my SM-G550T1, and the camera and sound (including phone calls) don't work!
This makes me strongly suspect a driver issue, which could most likely be fixed by getting my hands on a copy of the factory boot.img.
Running Android 6.0.1 right now, compiled for the SM-G550FY, but I can't get it working.
Subsentient said:
Yes, I did, but as you can see, those are for the SM-G550FY, not my SM-G550T1, and the camera and sound (including phone calls) don't work!
This makes me strongly suspect a driver issue, which could most likely be fixed by getting my hands on a copy of the factory boot.img.
Running Android 6.0.1 right now, compiled for the SM-G550FY, but I can't get it working.
Click to expand...
Click to collapse
>> and the camera and sound (including phone calls) don't work!
Did they not work from day one or did they just stopped working after a passage of time or due to rooting or an OTA upgrade? If you didn't root or install a custom ROM, there is just no room for a software/driver issue to happen. Did you try wiping the cache partition and doing a factory reset?
EDIT
In any case, boot partition is the last place you look for actual component issues like camera or sounds. All the boot partition does is just kickstart your android OS and then the control is passed on to the system (as soon as the logo animation starts).
prahladyeri said:
>> and the camera and sound (including phone calls) don't work!
Did they not work from day one or did they just stopped working after a passage of time or due to rooting or an OTA upgrade? If you didn't root or install a custom ROM, there is just no room for a software/driver issue to happen. Did you try wiping the cache partition and doing a factory reset?
EDIT
In any case, boot partition is the last place you look for actual component issues like camera or sounds. All the boot partition does is just kickstart your android OS and then the control is passed on to the system (as soon as the logo animation starts).
Click to expand...
Click to collapse
I did install a custom ROM. None of the ROMs I can find support the camera or audio, not at all, ever.
Subsentient said:
I did install a custom ROM. None of the ROMs I can find support the camera or audio, not at all, ever.
Click to expand...
Click to collapse
There you are! I just cannot emphasize enough that why don't you guys backup your existing ROMs before flashing a new one? It hardly takes five minutes with CWM/TWRP recovery.
In any case, what happens when you flash the Indian ROM (5.1.1)? I guess that could be your only option.
Otherwise, you can put a request on the CyanogenMod thread for your particular Samsung model.
For future reference, perform device backups and all the research before flashing a custom ROM, not after the fact.
EDIT
If you can contact Samsung support, see if you can manage to get a stock ROM from them that you can flash using ODIN or something.
I contacted them already, they basically told me to go **** myself. The missing ROM is a result of bad parameters I accidentally put in to Heimdall/ODIN flasher. I wanted to back up, but ironically, my first attempt at installing TWRP is what destroyed my ROM.
I've downloaded the kernel source code from Samsung and I'll try compiling it myself. If I create a working boot.img, I'll post it here.
prahladyeri said:
In any case, boot partition is the last place you look for actual component issues like camera or sounds. All the boot partition does is just kickstart your android OS and then the control is passed on to the system (as soon as the logo animation starts).
Click to expand...
Click to collapse
boot.img is where the kernel is stored. I know, I decompressed it.
Subsentient said:
boot.img is where the kernel is stored. I know, I decompressed it.
Click to expand...
Click to collapse
You are right, boot.img has the monolithic kernel, however, a lot of drivers are available as separate modules in /system/lib/modules/, so you need to make sure that one is proper too.
In case of Samsung, I think it was probably a mistake to use TWRP/CWM to backup or flash ROMs since they don't tend to work as well with Samsung devices as ODIN/heimdall.
Yes, do post the result of your output once you are done, so its helpful to others.
prahladyeri said:
You are right, boot.img has the monolithic kernel, however, a lot of drivers are available as separate modules in /system/lib/modules/, so you need to make sure that one is proper too.
In case of Samsung, I think it was probably a mistake to use TWRP/CWM to backup or flash ROMs since they don't tend to work as well with Samsung devices as ODIN/heimdall.
Yes, do post the result of your output once you are done, so its helpful to others.
Click to expand...
Click to collapse
The kernel on this device does not have loadable module support. It's entirely monolithic. And, I'm having one hell of a time building a kernel this thing is willing to boot.
I really would love just to get a ROM from someone else's SM-G550T or SM-G550T1.
locked out by frp so i cant even turn on my sm-g550t1 so if you find the rom please let me know
bandtab said:
locked out by frp so i cant even turn on my sm-g550t1 so if you find the rom please let me know
Click to expand...
Click to collapse
I found a copy of the MetroPCS version: https://drive.google.com/file/d/0B_VtvT1vGmlsMjNnR2JvYzk0MFU/view?usp=sharing
You flash this with TWRP recovery, because those are tarballs and can't be flashed with Odin etc.
You flash TWRP for the On5 onto your recovery partition, and then restore from that.
Subsentient said:
I found a copy of the MetroPCS version: https://drive.google.com/file/d/0B_VtvT1vGmlsMjNnR2JvYzk0MFU/view?usp=sharing
You flash this with TWRP recovery, because those are tarballs and can't be flashed with Odin etc.
You flash TWRP for the On5 onto your recovery partition, and then restore from that.
Click to expand...
Click to collapse
thank you!
however, i can't install twrp to my recovery partition anymore because i got FRP locked, and i can't go into my settings to disable it now. so i think my only option really is via odin. i'll see what i can do with this though, thank you very much. i did have twrp on there before but after i got frp locked i can't go into recovery mode at all.
I've been losing my mind trying to make this work.
I think if I installed the stock recovery.img it may work, but I can't find it in the files you sent. Would you or anyone else be able to make a copy of it for me? I would be eternally indebted to whoever could.
If you want to go back to stock then use the official samsung software. I got a s6 tht a friend of mine straight up deleted the rom (idk how they managed that) and it wouldnt take to being flashed in odin. I put it in download mode and provided samsung smart something with all the info it wanted and it installed the stock rom and everything.
holydude92 said:
If you want to go back to stock then use the official samsung software. I got a s6 tht a friend of mine straight up deleted the rom (idk how they managed that) and it wouldnt take to being flashed in odin. I put it in download mode and provided samsung smart something with all the info it wanted and it installed the stock rom and everything.
Click to expand...
Click to collapse
unfortunately smart switch is incompatible with this model phone for the time being.
I got four of these from T-Mobile when we switched from Verizon ($120 for 4 lines). Three of our Verizon phones worked well on T-Mobile (after a few APN tweaks), but my dad's old Galaxy S3 barely worked at all, and when it did, only got Edge for data. So I set one of the On5 phones up for him.
Everything was going great. I put the TWRP recovery on it, rooted it, froze all the bloatware, and backed up/restored his apps from the old S3. However, he wanted me to see if I could restore all his SMS/MMS. I tried restoring that, and the stock Messaging app started FC'ing. I installed Textra, which worked (and saw the old messages), but he never received new texts (even though he could send). So I tried removing Messaging and Textra, as well as the SMS cache (which seemed to be in "Dialer Storage (Phone SMS/MMS). I removed it, but now I'm getting an error every five seconds about "com.android.phone" and can't seem to get rid of it. I tried to restore the dialer storage backup again, but it just seems to sit forever without installing.
I've looked far and wide for a stock ROM... hoping I could just put this mess behind me, but I'm surprised to find it is nowhere to be found.
My other alternative would be to fix the com.android.phone error, but nothing seems to fix it.
Which cynogenmod or any custom os suits for Samsung Galaxy on 5.......please tell me guys.....I am bored with this official os
I was really hoping to come back to this forum and finally see stock ODIN files for this phone. I really, really want to get rid of the MetroPCS ROM I used to fix it.
Has anyone been able to find it?
CAUTION TO NOT LOOSE TWRP
I read two posts that say v21, now again on V8.5, put the stock recovery back instead of twrp. This is probably a side effect of a fresh stock /system and wipe of /data.
As a preventive step, when done flashing and wiping reboot to recovery FIRST, before booting the system It will allow recovery to handle removing the recovery-from-boot.p that flashes stock recovery.
I just patched the modified V7.4.2 up to the newly released 8.3 now 8.4. 8.5, 8.7,9.0 -V9.2 Patch
New update has been made from V17 to V21 of the non prime version of R1-HD, Non prime is behind on security patch (2017-05-05)
Copied ROM from phone and made twrp install ROM from it.
* No preloader change (official updates change the preloader to block your ability to use sp flash tools for rom flashing)
* No lk.bin change __ this part is what allows you to choose boot options(boot menu when power and volume pressed together)
* No "FOTA" app Fota has now been left in to make it easier to get next update, if that ever happens.
* No opera browser
* No adds (removed in the modified 7.4.2)
* Custom boot logo (only done on v8.3, there was no interest in this so abandoned)
--Newer versions of rom left stock, Leaving mods up to user.
** while it is not necessary to do a wipe with this ROM, I still recommend it.
**Thanks:
** @vampirefo needed his patched v7.4.2 in order to apply this new 8.3 patch and again for 8.4
** @ColtonDRG OR @jasonmerc I do not remember which one made it: For the image used in the custom logo
and the modified zip is here .
Roms are rootable with SuperSU, flashed in twrp after install. Must be done in systemless mode. In order to patch system veridy in boot.img
Logo update did not work on original rom changing link to updated version
BLU rolled v8.3 back to v7.4.2 because of app compatability issues. V8.4 is there fixed release. Both 8.3 and 8.4 are modified prime roms with ads stripped
V21 is the non prime update.
Unmodified V6.1
==>NON-ROOTED-logo-not-replaced-modified-V8.3
==>Fixed Logo modified NON_ROOTED V8.3
==>>modified V8.4
==>>modified V8.5
==>>Full with Ads V8.7
==>>Full with Ads V9.0
==>>Patch For V9.2 must be flashed on top of fresh V9.0
****Run debloat ==>script to remove ads if you need/ want to, or remove from zip before flashing ****
alt. manual example: before reboot, while still in twrp. Select mount and put checkmark next to system. Then run these two commands in adb terminal
Code:
adb shell rm /system/priv-app/com.amazon.*/com.amazon.*.apk
adb shell rm /system/app/Adups*/*.apk
==>>Modified V21
** stand alone logo installs
I flashed this but I didn't get the custom boot logo.
mendelgordon said:
I flashed this but I didn't get the custom boot logo.
Click to expand...
Click to collapse
I had that happen to my second phone too.
I don't have an explanation yet.
I even made a separate update.zip , that one didn't make the logo change either. I did eventually change it with sp flash tool.
I tried with both recoveries.
and multiple /dev location formats. and for whatever reason my one phone did not accept the logo change from recovery.
And the other test phone it worked.
mendelgordon said:
I flashed this but I didn't get the custom boot logo.
Click to expand...
Click to collapse
Neither did I but it all seems to be working fine
Been using this for about a day now, likewise no custom boot logo, but that's fine. Otherwise, it's been running super well. A lot better than the previous mostly stock version did for me with the bloatware APKs removed after the install. A lot of the general idiosyncrasies of the previous version of the stock rom seem to have gone away for me. It seemed to have weird storage management issues, errors moving to SD, broken symlinks that prevent apps from moving or being reinstalled, and a lot of other little non-storage issues, but so far, none off that here.
Long story short, good work! I hope we eventually see proper 7.x roms through some of the efforts going on, but in the meanwhile, your work here has made life a little bit better on 6.
It seems that I was able to get the logo.bin to update when I applied the original update patch, but not when I used the same line in the rom install.
It is no big deal that it did not work, I was just trying to make it look different at boot time.
edit:
I think i found the problem with the logo not updating.
i used the update-binary from the official patch update. (the one that allowed the logo to change the first time)
and it changes . so since the ROM seems to install the way it is , only the logo didn't flash I put it in a separate update.zip if anyone is interested in it.
EDIT 2:
clarification.
It was not so much the binary allowing the logo to change but the format of the partition location I had been using that needed that binary.
Further test had shown me that I could have used the binary I was using but just change the partition naming line
Code:
package_extract_file("logo.bin", "/dev/block/mmcblk0p9")
the above code works with the same update-binary as rom install
But I was using
Code:
package_extract_file("logo.bin", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/logo")
Taken straight from the official patch, and thats why it needed the update-binary also.
I dont know what is different in the binary other than , major size difference.
The powered by me logo was just a test file to see changes in the logo.
**logo-update is same as composite but with alt updater-binary
**composite-logo screenshot is in op
**stock logo will return to original BLU logo
mrmazak said:
It seems that I was able to get the logo.bin to update when I applied the original update patch, but not when I used the same line in the rom install.
It is no big deal that it did not work, I was just trying to make it look different at boot time.
edit:
I think i found the problem with the logo not updating.
i used the update-binary from the official patch update. (the one that allowed the logo to change the first time)
and it changes . so since the ROM seems to install the way it is , only the logo didn't flash I put it in a separate update.zip if anyone is interested in it.
EDIT 2:
clarification.
It was not so much the binary allowing the logo to change but the format of the partition location I had been using that needed that binary.
Further test had shown me that I could have used the binary I was using but just change the partition naming line
Code:
package_extract_file("logo.bin", "/dev/block/mmcblk0p9")
the above code works with the same update-binary as rom install
But I was using
Code:
package_extract_file("logo.bin", "/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/logo")
Taken straight from the official patch, and thats why it needed the update-binary also.
I dont know what is different in the binary other than , major size difference.
The powered by me logo was just a test file to see changes in the logo.
Click to expand...
Click to collapse
Hahaha the scribbled "ME" is hilarious. Your work is awesome, I don't think anyone using this rom will have an issue with the boot image but thanks for being so helpful and explaining.
P. S. Do you have any plans with the Nougat update?
Serenitybs said:
Hahaha the scribbled "ME" is hilarious. Your work is awesome, I don't think anyone using this rom will have an issue with the boot image but thanks for being so helpful and explaining.
P. S. Do you have any plans with the Nougat update?
Click to expand...
Click to collapse
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
linuxsociety said:
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
Click to expand...
Click to collapse
Somebody already tried this out
linuxsociety said:
Nougat is going to take a full build from scratch. We don't have 100% identical hardware with any other nougat device to my knowledge. We might have the same MTK chipset, but there are several other differences. All we really need is an official device overlay and the vendor files released by BLU themselves. We can then apply those to the latest Lineage or AOSP (I prefer AOSP myself) and build. Then the only problem we'll run into is anything that has changed in 7.x that isn't compatible with our kernel we use in 6.0. It'd be a slight chance our current kernel would work without some patches on 7.x We can't even get our official sources for anything else, so I'm almost certain we'll not find any patches to for the kernel to work properly with Nougat, at least not from BLU or any similar devices. None The less Nougat has been well thought of, and we have been trying to debug issues with a broken Port. But a broken port from a different device is just that - Broken. We need a team of knowledgeable devs to build Nougat + Kernel from scratch and then we'll have it working. I can't do it alone with the old computer I have, the R1HD would be long forgot of by the time I got Android Compiled haha.
Mr. Mazak I flashed your rom it went smooth, I was hoping the newest update was for 6.0.1. But I didn't lose any functionality, hopefully on my Cricket Service this update has patched some things to the radio device that will retain connection more steadily. I experienced a lot of coming and going with the 7.4.2 rom. None The Less you did a good job with this update Mr. My suggestion is find the same MTK chipset with a fully working 7.x rom and just port the /System but keep all our libs and inits from this release just for a test starter. And don't replace the camera app thats in AOSP 7.x. )
Click to expand...
Click to collapse
It was just wishful thinking. I have no idea how all of this is done. All I know is @mrmazak has helped me to fall in love with my phone again with this V8.3. The 7.4.2 did seem a bit buggy for my phone but this update works beautifully and I didn't even root it. If this remains true I will be happy with this phone for awhile even on 6.0
Really confused right now.
I was browsing through the settings menus. And found in the Settings-security- menu a toggle labeled "quick boot" ( not to be confused with "fastboot") . I enabled it then rebooted to see if it booted quicker. Didn't seem to make much if any difference. So I went back to turn it back off. And it wasn't there. I checked in my other phone , it wasn't there on that one either.
Did any body see this menu item, and if so where is is it?
Edit 1:
Few more power off , power on cycles to compare times. With other phone and defiantly seems to have turned on some faster boot option.
This phone goes from off to on in 5-6 seconds other phone takes about 20.
Edit 2:
OK , I panicked for a minute.
Couldn't find the setting and thought that it was another way to block sp flash tool by preventing you from ever being fully powered off.
But the setting was in accessibility not security.
Mrmazak, first of all, thanks for the ROM, installed it yesterday. But I have a problem with SELinuxModeChanger app. First, I'm getting a security warning when installing it, then - when running it. And another message, with this app running - "can't obtain root", although SuperSU shows its status with green #, like every other app it gives root privileges to. On my other Prime phone, running 6.1 out of the box stock ROM, FM radio works just fine with SELinuxModeChanger app behaving flawlessly (no security warnings whatsoever). Any ideas?
detroitredwings said:
Mrmazak, first of all, thanks for the ROM, installed it yesterday. But I have a problem with SELinuxModeChanger app. First, I'm getting a security warning when installing it, then - when running it. And another message, with this app running - "can't obtain root", although SuperSU shows its status with green #, like every other app it gives root privileges to. On my other Prime phone, running 6.1 out of the box stock ROM, FM radio works just fine with SELinuxModeChanger app behaving flawlessly (no security warnings whatsoever). Any ideas?
Click to expand...
Click to collapse
The mode changer app is technically a security issue. I did have that warning a few times when using mode changer app from the XDA thread of the developer, then when I used the app downloaded from f-droid it worked with systemless root and didn't give the security warning.
The app downloaded from f-droid worked for me as well, many thanks!
Big thanks for getting this out, updated from previous debloated, rooted version to this modified 8.3 stock rom, rooted with SU v2.79 SR3, all is good - only App that won't show up nor install, even tried the ones off APK Mirror site - is my Dunkin Donuts App, LOL. Play Store now said it's not compatible and the APK started to install then failed - any ideas or suggestions on what to do ??
Otherwise, it's all good - I will survive without DD App, just run that from another device when I need my caffeine fix.
Letitride said:
Big thanks for getting this out, updated from previous debloated, rooted version to this modified 8.3 stock rom, rooted with SU v2.79 SR3, all is good - only App that won't show up nor install, even tried the ones off APK Mirror site - is my Dunkin Donuts App, LOL. Play Store now said it's not compatible and the APK started to install then failed - any ideas or suggestions on what to do ??
Otherwise, it's all good - I will survive without DD App, just run that from another device when I need my caffeine fix.
Click to expand...
Click to collapse
I also had an app that previously work, say is not compatible now.
Maybe has to do with apps that have links to pay accounts. And that has something to do with trustzone. (Tee1 & tee2)
Those sections I left out of the update. I will add it back in and test. Update when I do. It is also possible this problem is why Blu rolled back there update.
**EDIT**
well that didn't go well at all.
I flashed the new trustzone.bin files from the official update. Now phone no longer turns on and no longer connects to flash tool
**EDIT 2**
After much persistence and many failed attempts to get phone recognized in pc again. Finnaly got to a point that phone was cycling between "preloader" driver and "usb serial device", and with careful timing was able to start sp flash tool at just right time and the flashing back to original trustzone files seems to have recovered phone.
for the record i am not sure what steps made it work. But I was shifting back and forth between leaving phone sit on charge, then on charge with rubber band wrapped around power button, then not plugged in , and not plugged in with rubber band on power button.
Okay... persistence is key in customization, i guess! I am getting somewhere here!
mrmazak said:
The first link is needed to get phone unlocked so you can install twrp.
Click to expand...
Click to collapse
Finally got thru the steps in order (1-2-3-4) then Step (5) and sub-step 1. I can also boot to TWRP.
Now this brings me to this thread, 8.3 Stock ROM. The thread assumes one knows how to install it and I suspect this could be as easy as uploading it to a folder in the phone then booting to TWRP and INSTALLING the ZIP file? Could someone clarify the steps to install this 8.3 ROM?
Thanks!
OldSkewler said:
Okay... persistence is key in customization, i guess! I am getting somewhere here!
Finally got thru the steps in order (1-2-3-4) then Step (5) and sub-step 1. I can also boot to TWRP.
Now this brings me to this thread, 8.3 Stock ROM. The thread assumes one knows how to install it and I suspect this could be as easy as uploading it to a folder in the phone then booting to TWRP and INSTALLING the ZIP file? Could someone clarify the steps to install this 8.3 ROM?
Thanks!
Click to expand...
Click to collapse
Yes. You are correct
Either put the zip file on external sd card , put card into phone boot into recovery mode and install , or put file directly onto phone .
Many ways to do that.
Easiest is to copy to phone while phone is connected to PC.
Cam also download file from internet with your phone.
Bottom line is get zip file to the phone boot to recovery and install
Anyone else having wifi issues after upgrading? While watching videos it seems the internet cuts out. The phone says it's still connected but I have to turn wifi off and back on for anything to work. Could be my router also but it didn't seem to be doing this until I installed 8.3
mrmazak said:
Yes. You are correct
Either put the zip file on external sd card , put card into phone boot into recovery mode and install , or put file directly onto phone .
Easiest is to copy to phone while phone is connected to PC.
Bottom line is get zip file to the phone boot to recovery and install
Click to expand...
Click to collapse
Right on man! I am officially running 8.3 ROM with April 5th 2017 Security Patch Level! Geez.. it was not easy but I got this working!
MrMazak, I followed all your instructions on both links, so could you tell me what exactly I have on my phone? Is it rooted? Bootloader Unlocked? The phone seems to be working fine but I don't know what level of access I have. Honestly I don't even know exactly what the differences between all these terms are.
Also, do I have or not SU? One of the steps under the .bat I believe install it. How do I access it?
Thanks again!
---------- Post added at 10:19 PM ---------- Previous post was at 10:18 PM ----------
Weasel0 said:
Anyone else having wifi issues after upgrading? While watching videos it seems the internet cuts out. The phone says it's still connected but I have to turn wifi off and back on for anything to work. Could be my router also but it didn't seem to be doing this until I installed 8.3
Click to expand...
Click to collapse
My install is pretty fresh, couple of hours, but as far as I can tell all is working fine with Wifi, As a matter of fact this is a new device only connected with Wifi and no SIM Card.... internet works fine.
hi everyone,
i have a couple of questions and i favor i would like to ask from anyone who sees this.
i currently own the sony xperia e4 phone which as of right now , doesnt have any development for it since there is no custom recovery yet.
the problem is that the device doesnt have a stock recovery (and no recovery partition).Secondly it has a non-standard boot.img so mkvendor.sh script doesnt work.i am able to get the info myself (base adress, kernel adress etc.) but i dont have a pc atm so i cant compile it and it doesnt have a
recovery partition so i t cant be flash that way. i read something about flashing xperia recoverues on the fotakernel but im not sure if some modifications are needed to do so.
if anyone with a build enviroment and time would like to compile the recovery themself (i will provide files such as the boardconfig myself)pm me.
any help is much appreciated.
Mod edit:
Thread closed as the cross-dev section is not the place for this
Try asking here
https://forum.xda-developers.com/t/xperia-e4
This thread is presently about the development of a TWRP port to these devices.
The build is not yet working!
I am in the process of porting TWRP to my 3562 mostly out of pure spite for this stupid device. This thread is mostly for collecting my development process, for anyone who is interested, or wants to help.
Presently, TWRP will boot properly, and does function apart from UI issues and generally not being able to mount partitions correctly.
The UI draws in portrait mode (USB port at the top), but the touch interface responds in landscape mode (USB port on the right). This is very annoying, but it is still usable, so I haven't looked too far into it.
It seems to mount boot and userdata partitions okay, /sdcard is full of garbage data (encrypted? bad mount flags?), /system will not mount at all.
First order of business is to get /system mounted. It looks like this is related to vbmeta, so I have to sort out how to properly wipe the vbmeta on this device.
Here is my current image, if anyone is interested in trying it out: https://drive.google.com/file/d/1kMvKvocKY6AWRR-xkXIwisv27TmF6xcP/view?usp=sharing
I'll keep this updated as I keep working. As always, any input is greatly appreciated.
@tek3195 (moving the discussion here instead of two different threads)
Here are my fstab files: https://drive.google.com/drive/folders/1n-hieMe2r4gaais_pgI_gOMB11VKQUPU?usp=sharing
I don't see where to put the BoardConfig.mk, I'm guessing I need to actually build TWRP from source?
rolenthedeep said:
@tek3195 (moving the discussion here instead of two different threads)
Here are my fstab files: https://drive.google.com/drive/folders/1n-hieMe2r4gaais_pgI_gOMB11VKQUPU?usp=sharing
I don't see where to put the BoardConfig.mk, I'm guessing I need to actually build TWRP from source?
Click to expand...
Click to collapse
Thanks for moving, we were a bit OT in other thread. Yes the boardconfig.mk is for building from source. Does no good when using kitchen, I was just showing you an example of where and how rotation was handled. I still haven't followed up on changing rotation and touch input using kitchen, just got home from another heart catheterization. The only way to get a fully working fully functional twrp is to build from source, but without source code AIK is an awesome alternative. I just can't remember if we can change rotation and touch input in de-compiled img. We can ask @osm0sis if it is possible to edit recovery rotation via AIK. If you've not done so already, check out his work here on XDA. There are a lot of useful tools and scripts authored by him and a wealth of android knowledge that you can only benefit from reading.
Haven't ever messed with TWRP rotation myself, sorry. I'm sure it's something you can Google and find out though.
@rolenthedeep look at this may be helpful with rotation
I found this, same cpu/gpu as the 100003562
GitHub - Yahoo-Mike/recovery_device_lenovo_X606FA: TWRP recovery for Lenovo Smart Tab M10 FHD Plus wifi (TB-X606FA)
TWRP recovery for Lenovo Smart Tab M10 FHD Plus wifi (TB-X606FA) - GitHub - Yahoo-Mike/recovery_device_lenovo_X606FA: TWRP recovery for Lenovo Smart Tab M10 FHD Plus wifi (TB-X606FA)
github.com
I'm trying to figure out how to compile twrp for this tablet too.
mpalpha said:
I found this, same cpu/gpu as the 100003562
GitHub - Yahoo-Mike/recovery_device_lenovo_X606FA: TWRP recovery for Lenovo Smart Tab M10 FHD Plus wifi (TB-X606FA)
TWRP recovery for Lenovo Smart Tab M10 FHD Plus wifi (TB-X606FA) - GitHub - Yahoo-Mike/recovery_device_lenovo_X606FA: TWRP recovery for Lenovo Smart Tab M10 FHD Plus wifi (TB-X606FA)
github.com
I'm trying to figure out how to compile twrp for this tablet too.
Click to expand...
Click to collapse
OK, are you building from source or porting in kitchen ? I can try to help you out either way, I've ported a few and built a few but have not brought up new device. Before you start trying to build for a new device you should build for an existing device to make sure you can build successfully on your machine. If you have a device that has TWRP available use the trees for it and build and test your build on your device. If you don't have a device with available TWRP then build any of the current official versions preferably MTK based just to insure build environment is set up and builds correctly.
tek3195 said:
OK, are you building from source or porting in kitchen ? I can try to help you out either way, I've ported a few and built a few but have not brought up new device. Before you start trying to build for a new device you should build for an existing device to make sure you can build successfully on your machine. If you have a device that has TWRP available use the trees for it and build and test your build on your device. If you don't have a device with available TWRP then build any of the current official versions preferably MTK based just to insure build environment is set up and builds correctly.
Click to expand...
Click to collapse
I've downloaded AIK in windows 10 and unpacked my stock recovery so far. I have 2 of these tablets one is rooted with magisk via patched boot.img. The goal is twrp via patched recovery.
mpalpha said:
I've downloaded AIK in windows 10 and unpacked my stock recovery so far. I have 2 of these tablets one is rooted with magisk via patched boot.img. The goal is twrp via patched recovery.
Click to expand...
Click to collapse
I thought I was replying to someone else, but same applies. You're wanting to port one using kitchen the best place to start is here:
https://forum.xda-developers.com/t/guide-porting-twrp-without-source.3843473/
Where it gives the different screen resolutions go with largest, if it calls for a file not present in your device just skip it and don't add extras. There are a lot of guides but that one I know works rather well, I've used it on 3 diff devices. Cooking custom recovery in kitchen works but not always correctly. By that I mean that you may not have the ability to backup or restore or install. You may not be able to control brightness or some other setting or it could be that usb does not work. It can be a combination of any of those things and more. It can also be that you never notice something not working because it does everything you want it to. Just letting you know what to expect and saying that building from source is always best, even when it's unavailable.
If you ever get the time can you port TWRP to the 100015685-E?
@rolenthedeep here is a WIP fstab. I have commented out the partitions that were not first_stage_mount If you try it as is to try to get an idea of which parts are needed for recovery there is no sd card in it as it too is commented out for now. Got caught up in some other issues and stopped looking at it for a while. Maybe it will help a little.
Any updates on this? I have the 10.1 3562 version