[Q] cant change rom lg g2 d802 pls help - G2 Q&A, Help & Troubleshooting

hi,
a few weeks ago i installed a stock d802 5.0.2 lollipop rom from a site called htcmania (because i am new i cant paste the thread link here)
now when i try to install other aosp roms such as blisspop or vanir the installation shows no error but when i reboot my lg logo fades away and i have this weird lines on my screen like its broken and the phone shuts down.
i managed to enter recovery (twrp 2.8.5.0) manually but i dont know what to do now.
please help me!!

Related

[Q] How to Flash/Install the right Firmware and Custom ROM for LG L7 p705 or p700

I'm still newbie
But I can tweak any stock android gadget base on xda forum and all work fine, but its not fine with My LG L7 now.
I dont know how to install the right firmware and custom rom into general LG L7 P700 or P705.
As someone said If I did that, kernel wakelock will happen to My L7
All I know is I can flash any firmware of P700 or P705 into My LG L7 P705 (Or the opposite)
Please Fix Me if I was wrong​
Here step by step what I did to My L7
1. Get into Emergency mode,
2, Flash the latest Local firmware (I got Indonesia version and smetimes i get P700 or P705 european open firmware). V20B this time
3. All flash work fine, L7 reboot, and LG KDZ got and error on pc (What ever! just close and my phone already off from it when it shut)
4. Startup, get into adb on my pc.
5. Flash Root, done and reboot.
6. Flash CWM, done and reboot.
7. Startup and reboot to cwm.
8. clear all necesary (as many instruction on xda said that)
9. install zip from extrnal_sd.
Remember, My hardware and firmware is P705
Version 1 running rom for P705
1. install zip run and error code 7
Version 2 running rom for P705 with removed the first line (zip edited)
1. install zip run and error code 6
Version 3 running rom for P700
1. install zip run, done, completed and reboot
Slimkat
CM11​
After Instalation via CWM
L7 force reboot with bluescreen folowing.​
Can Someone provide the right method to install all of it in the straight line and also with link of the choosen rom that dedicated for LG L7 P705 or P700
You want to flash a custom ROM right?
It's not every time the same kernel and never flash a P700 ROM at your P705! You must read the threads and there are often posts of the developerts where they say something about P705 or P708. Just seek.
In some ROMs you must flash an other kernel and other .zip packages.
Heres a ROM that runs very good and in the first few posts there is written something about P705
http://forum.xda-developers.com/showthread.php?t=2396115
It's not 4.4 but 4.3 is much stabler than 4.4.
But if you must have a 4.4 ROM here: http://forum.xda-developers.com/showthread.php?t=2535014 (but for daily use its not as good as 4.3 ROM)
I hope i helped you.
Greetings!
please specify the rom ur dealing with,,the problem on installing a p700 rom on p705 is that u wont get deep sleep (wakelocks) ot means that phone wont sleep actually even though it seems to be sleeping( battery drains) not much but will still effect, the problem is that in p700 roms nfc in made on in the kernal itself ,
and about the status error u get when installing,,normally the first line or two lines belongs to asserts config,in which the tom checks about the phone model ,so if your are deleting these lines make sure u delete all the asserts line and not partially,,or else just change the words which says p700 to p705 thats all
---------- Post added at 09:46 AM ---------- Previous post was at 09:41 AM ----------
please go through this thread if u have some problem regrading p700/p705 http://forum.xda-developers.com/showthread.php?t=2486512
Install original firmware
root , install cwm .
Install CM 10.2 and teamhacklg's kernel for P705
and then install any other rom , this seemed to solve the above problem for me .

D802 stuck at LG logo after install Cloudyflex 2.2

Hi guys,..
I'm sorry if there is a post for this already, tried searching over the web but not found solutions for this problem.
my phone get stuck at LG logo after installed cloudyflex 2.2 from 4.4.2 (D802).
i do clean flash with full wipe but after want to reboot system there are asking to install SU. And i just follow but after waiting 15 min my phone still bootloop. Please help me to find for solution for this..tq

[Q] What did autorec do to my phone?!?

Hi all,
Let me try to walk you through everything that I've done to try and get some help here.
I have an lg g2 sprint (lg-ls980)
1. When I got it I first upgraded to android 4.4.2
2. Then I rooted using stump root
3. I installed xposed and a few xposed modules....I then decided Id rather have a different rom, so
4. I used autorec (which to my understanding changed my kernel in order to workaround boot loader and install twrp? is that accurate?)
5. Booted to twrp, wiped data and installed cyanogenmod and gapps
After this I get stuck and can't boot past the lg logo, so I booted back to recovery and restored my backup. So I did the same and tried pacrom this time with the same results.
I then decided that if I'm going to be stuck with stock rom I at least want my knock on back, so I flashed the patched kernel and same thing- stuck at lg logo....
I know I downloaded the correct zip files and placed them on the root, and always wiped before flashing.
Then I went into download mode on the lg support tool to try to get back to factory, but it says my firmware and recovery is up to date. The odd thing is that the lg support tool shows my phone as ls740 rather than ls980... is this because of something that autorec changed? Do I need to download zip files for ls740 instead? So confused..
About phone in my g2s settings shows android version 4.4.2 and kernel version 3.4.0
Anyways, if anyone could help me to successfully get one of these roms to flash and get back to the kernel that supports the knock code I would really appreciate it.
Thanks in advance!

Why installing Cloudy G2 on F320L its almost impossible?

Hi guys,
Im trying for week to install Cloudy G2 3.3 on my korean F320L model.
I was trying almost everything and all i do was to brick my phone dozen times.
So now i want someone to help me a bit.
What i tried?
1. Lollipop. I updated my stock JB room to Lollipop and then wanted to install This TWRP (f320l_lollipop.apk) but it was not working.
Everytime i was able to see an Android with open stomach and red triangle instead of TWRP. But if i install any other version of TWRP like for f320k or sth i wasnt able to install anything on it, cause my phone was crashing over and over. So i started for looking some other ways to install Cloudy G2.
2. KitKat. I updated stock JB android to KK 4.4. Then after Rooting phone i was able to install this TWRP (f320l_AutoRec.apk ) and go to recovery mode.
But the next step in All guides was to install blastgator from dorimanx and i choosed f320 version and install it. But after reebot to recovery nothing happens just black screen.
So i tried other version but everytime i failed.
Now im totally lost.
Can someone who runs Cloudy G2 3.3 on his korean LG G2 F320l how to do it?
What system i need. Witch TWRP install, Witch blastgator and what next.
Thanks in ADVANCE!

Trying to install Cloudy 3.3 but ended up in black screen

Hi All,
I've been trying to install Cloudy G2 3.3 into my LS980 for the last probably 15 hours with no success. Each time Cloudy finish installation through TWRP and reboot, it goes into LG logo for a second and goes black screen. Can't get back into TWRP after. I can only go back into download screen. I know how to tot it back to stock but not sure what the approach is to get Cloudy 3.3 installed.
Below are the instructions I followed:
- Start with Stock rom (I've tried, 4.4.2 ZVC and 5.02 ZVH)
- Rooted with ioroot
- installed TWRP 2.7.0.0
- Installed Quickboot app
- Downloaded these in the sdcard: Cloudy 3.3, TWRP 2.8.6.0 , KK bootloader ( simpleBootstacks-ls980-nevax-KK--signed.zip )
- Reboot into recovery using Quickboot app
- Wipe davick, cache, data, system
- Update TWRP to 2.8.6.0 (also tried 3.1.1.0)
- Flashed KK bootloader simpleBootstacks-ls980-nevax-KK--signed.zip
- Press reboot into recovery
- Most of the time I will get the 1 second LG logo and goes black screen here.
- 1 time i was able to get pass that part and Flashed Cloudy 3.3 in recovery. But afterwards same thing, 1 second LG logo and goes black screen.
I can still tot it back stock but not sure what the approach is to get Cloudy 3.3 installed. (I've also tried CM13 with same results) I've looked into this quite a bit and couldn't find a solution. I read heavy emphasis on using KK boatloader and I feel like that's where my problem is but not sure what it is. It seems like the LS980 KK Bootloader is much more harder to find than the other variants. The one I found I don't know if it is correct since I haven't read many feedback on that piece.
I've also tried flashing the Boot Changer and ran into the same issue.
Any help would be much appreciated.
Really wanted to get this ROM or any battery efficient rom in my G2 since this phone dies on me very quickly being that it was bought used.

Categories

Resources