As the title states, after nightly update of CM12 my phone was unrooted and I could not figure out why. After getting home and finding my pc could no longer detect my device I though, maybe dev options was removed. and sure enough I was right, so I was going through the options in dev options and low and behold what did I find, a nice little option to enable root. DEV OPTIONS HAS ROOT TURNED OFF BY DEFAULT. you MUST enable it after update to fix all broken programs. Sorry I could not find this in any other thread so I thought I could help
Um... root is switched off by default on CM and you need to enable it using Dev options.
There's a CM12 nightly thread in the G3 Original Dev forum and it's a well known fact.
Related
a few things that had me thinking:
1) does anyone feel this update makes the text on the screen a bit more pixelated. it doesnt seem as sharp as ics.
2) there a load of options missing from the rom control like power option no screenshot ability?
3) lockscreen only 3 targets show. no option in opntions to set more than three,.
Firstly, you could have simply posted a reply over at Resurrection Remix's thread instead of creating a thread about your opinions here.
Secondly, the current Jelly Bean version of RR ROM is based on AOKP's nightly builds - which means that many things are still under development.
Things may be missing currently like what you've mentioned but you may look forward to future releases when more features and customizable options would be back.
Furthermore, Android Jelly Bean source codes are just released not long ago. You can't rush things to be done up so quickly, dude.
+ Regarding screenshot, c'mon, you can just press Volume Down Key + Power Key for it.
This bloke is ridiculous. You try make a ****ing ROM. Go on give it a shot. It's really not that easy you d!ck.
ayazyounis said:
a few things that had me thinking:
1) does anyone feel this update makes the text on the screen a bit more pixelated. it doesnt seem as sharp as ics.
2) there a load of options missing from the rom control like power option no screenshot ability?
3) lockscreen only 3 targets show. no option in opntions to set more than three,.
Click to expand...
Click to collapse
Clearly wasn't thinking when you made a new thread for this though
I think he was desperate to earn more posts since he has only made 6 so can't post on RR threads. But that doesn't stop him from reading RR op and faq.
If u earn ur stripes to post do be careful in what u post. It needs to be helpful or new or something that has not been covered. Learn from this or i will have to set pigmachine on u.
Why don't use just bloody flash rr 2.6.1 if u won't all the rom control features?
Main ROM : RR AOKP 2.6.1
2nd Rom : RR JB 3.03
KERNEL : Dorimanx 5.64 new
Modem : LQ6
Root app: SuperSu
Q&A for [ROM][4.4.4][KTU84P] SlimKat - Mako -[Build 8][+ Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
SlimKat. Incoming call LED light color.
Im having trouble changing notification light for incoming call (not missed, but the light while phone actually ringing). LightManager and built-in settings do a good job for all lights except this one. It stays white-ish.. I assume some code in systemui needs to be changed? Please, help.
Could someone recommend color settings for faux123's color temperature correction app ? I'd like to find just a genetic setting to help fix the washed out appearance the colors have by default?
I set PIN to unlock screen, but when i lock the screen only slider works, never appear the keypad for insert PIN.
Anyone have PIN to unlock working in weekly 8.9?
@bart.found
No problem here
I'm having troubles using miracast... I don't know why.. But I tryed to connect my mako with a samsung smart tv and with a lg smart tv... Same result! Connection starts, but after a second it disconnect...
Edit: could it be kernel related?
Nexus 4 with slimkat receiving OTA update?
Hello,
I have a Nexus 4 with slimkat 4.4.4 and I just received a notification to download lollipop by google.
Is it normal? If I do the download, what would happen?
Really hope you can help me because I though I wouldn't receive more OTA updates since my custom rom.
Thank you all!
Sekas said:
Hello,
I have a Nexus 4 with slimkat 4.4.4 and I just received a notification to download lollipop by google
Click to expand...
Click to collapse
+1
I was really surprised as well. If you check out which app brings it up, it turns out the entire OTA thingy is managed through Google Play Services app. Seems like updating may temporarily brick your device or return you to stock ROM.
But that also brings another question: when will Slimpop/SlimLP nightlies start to show up for our makos?
Is the current SlimLP based on 5.0.1 already?
(less than 10 posts so I reply here, original post: http://forum.xda-developers.com/showpost.php?p=57585383&postcount=8497 )
@brordavid "Anyone experience problem with Netflix on slimlp? It won't start at all, it just shows the Netflix logo and the loading ring for a while, and after a while it gives me an error that it cannot connect."
Yes, I have exactly the same. Error is: "Sorry, We Cannot Reach the Netflix Service (-9)". I tried all what Netflix help pages suggested (reboots, reinstalls) but no help.
Here is logcat from Netflix app startup to error -9: http://pastebin.com/MEnPasAa
I have a problem in incall ui in slimkat stable 9 (clean flash).. my contact pictures when I call (or being called) someone are bigger than they should be, anyone experiencing the same problem?
Slim-mako-5.1.1.alpha.0.3- and f2fs
Hello
please tell me the current status of f2fs on the Slim-mako-5.1.1.alpha.0.3-UNOFFICIAL-20150521-2151 release mentioned here
Do I need to follow the instructions as described here
and edit the actual ROM, or is f2fs support built in now?
I know that data and cache need to be formatted as f2fs, but is that enough, or do I need to modify the ROM itself
thanks
Daniel
Cant seem to get Franco 217 working. Just get boot loop when flashing it. Any suggestions?
Sent from my Nexus 4 using Tapatalk
Is there a ROM for the retail verizon version that has built in Profiles.?I've been away from my S5 for awhile so I haven't been following ROM development for about 6 months.. But now I want to add a 2nd user. I'm currently doing that with the Xposed multiuser module. But I'd like to update my ROM and find one if I can with profiles baked in. I've done some (lots of) searching, but have only found CM11 but as near as I can tell it can't be installed on the Verizon variant because of the locked boot loader. I don't need a lot of info just the name of any ROM's that I can then research myself.
No one is using/tried a rom with multi-user profiles on this device or is there not one?
Thanks for any help with this.
MOAR!!!!
Thanks, I'll check it out.
I recently bought a FLIR ONE thermal imaging camera. Unfortunately, the device is not detected on my D802 using any marshmallow ROM.
I was using Resurrection Remix rom, but also tried Paranoid, XOSP, Dirty Unicorns, AICP, .... with no luck. Also, flashing Dorimanx and Lambda kernel didn't help.
When I run Chainfire USB Host Diagnostics, it says the kernel supports it, but OS does not.
On Lollipop (stock-based) roms, there is no issue, and the device is detected.
Can someone explain why the marshmallow ROMs miss this support. Is there any way to get this working ? I'm now running a LP rom again, just to be able to use the cam, but it really feels like a downgrade.
Same here, did you manage to fix it?
tehsYs said:
Same here, did you manage to fix it?
Click to expand...
Click to collapse
No fix other than going to stock based ROM or other phone.
All mm/aosp/caf roms are using a generic otg driver that breaks support for usb host intent filters. In other words, the phone won't broadcast to applications the a usb otg device has been plugged in.
It's not just your device in question, any device other than flash storage doesn't get detected. A developer could probably fix this but as it is broken in all non-stock roms it would probably be challenging to fix.
I do android development Mostly for the droid turbo, apps and tweaks. I think i may be able to help out here.
I did manage to get flir one working on none stock rom last night. It worked fine on stock. Then i seen this post installed cm and no joy. So after a bit of tweaking i did get it to work. I will see if i can come up with some kind of Universal patch for all users.
I will try and post a how to video to get it working on non stock roms. I am going to pull out some other phones to see if the patch works on all phones.
Keep an eye on my youtube channel http://www.youtube.com/iphostway/videos
I will work on a Universal fix starting today.
computerfreek274 said:
I do android development Mostly for the droid turbo, apps and tweaks. I think i may be able to help out here.
I did manage to get flir one working on none stock rom last night. It worked fine on stock. Then i seen this post installed cm and no joy. So after a bit of tweaking i did get it to work. I will see if i can come up with some kind of Universal patch for all users.
I will try and post a how to video to get it working on non stock roms. I am going to pull out some other phones to see if the patch works on all phones.
Keep an eye on my youtube channel http://www.youtube.com/iphostway/videos
I will work on a Universal fix starting today.
Click to expand...
Click to collapse
That would be really cool
If I can help testing your fix, please let me know.
Hey guys, this is my 1st post so if I'm doing anything that I'm not supposed to or posting in the wrong area, please say so.
Ok, so, I used to have Android phones back in the day, since 2.2-2.3, then 4.0-4.4 and still used custom roms to update my mom's Moto G 1st Gen, from 4.4 to 7, but I manly used iPhones ever since 2012 and the easy jailbreak life made me kind of lazy - all of the process of jailbreaking and installing tweaks was very easy.
Now I'm back into the Android world with a Moto G4+ and I've already unlocked the bootloader and installed a few of the available custom roms, but none of them were actually stable enough to use in a daily basis so I got back to the stock rom.
Now I'm downloading LineageOS (that's the rom I also used to upgrade my mom's phone) and I got a few questions about it (since I can't post them on the official thread):
- can I enable the notification LED?? I can't do that in the stock rom but it worked really fine in the cypherOS rom.
- is there any option to disable the soft keys and use the fingerprint sensor as these buttons?? I mean, some kind of gesture, like the VirtualHome tweak in iOS, when a touch equals to home, a double tap to multitask etc. Just saw that the G5 will have some gestures in the FP sensor that will replace the soft keys, so a port of this feature would also be good.
- is this rom already rooted or do I have to install something else??
- is xposed working?? I actually found one article about it in the G4 but it was for MM and then I didn't find anything about it in N.
Sorry for my dumb questions, I swear I was going to read all of the official thread but when I was in the 9th page I saw that there was 294 total pages and then I gave up. :crying:
[EDIT]
imgur . com/9t1zK4M
imgur . com/BvDf0Uh
OK so, answering my own questions (at least a few):
- the LED is enabled by default I'm in heaven;
- THERE IS a default option to use the FP sensor as home button AND another one as to place multitask screen to show up by double pressing the home button. With this two options I am able to use the FP sensor at it's full potential (in my humble opinion) BUT as you can see in the images I am able to hide the softkeys only in a few parts of the system, it still shows up when you pull down notification center and also when you open up the keyboard. It's very annoying. I guess this question is still up.
- I think it's rooted by default thank you very much.
To your xposed question: no, there's no xposed for nougat out yet
cm theme engine
How to get cm theme engine on lineage os
I just saw cm theme engine in a screenshot which is attached in a thread based on unofficial lineage os
kd0321 said:
How to get cm theme engine on lineage os
I just saw cm theme engine in a screenshot which is attached in a thread based on unofficial lineage os
Click to expand...
Click to collapse
It won't come back. If you mean a screenshot where you see "themes", then it is with substratum. Themes appears in settings after installing substratum. It has nothing to do with CMTE.
strongst said:
It won't come back. If you mean a screenshot where you see "themes", then it is with substratum. Themes appears in settings after installing substratum. It has nothing to do with CMTE.
Click to expand...
Click to collapse
Ohhh thanx
I too just found out that