Hi,
I've been do many flash last 24 hours on my Galaxy S4(Model SGH-I337M, Telus). Initialy, i've the factory stock rom, rooted. So, yesterday, i've decided to install Cyanogen mods nightly on my phone. Not the first time i've been used it on my phone. No problem before. So, this night, after a friend show me the release canditate release seem to be more stable, i've been try to put it on my phone. So, accidentaly wipe all the data on my phone. When i'm back home, i've put again the samsung original rom from my operator(4.2.2), found here, on the website, whit odin. All completed succefully, but i've noticed that the wifi won't turn on after the flash, and no sound from the speaker. So, i've put Cyanogen nigthlies again to test if it rom relative, but same issues here, no sound, but the wifi was working. The phone was very instable, so. Then, finaly, put the original rom again, without any rooting. Stuck on samsung logo, that i've finaly got fixed by clear the data and cache. But, no sound, and no wifi. Instable too.
Precision about phone: Unlocked whit the service mode(work), and enabled AWS whit a software and file(tutorial found here)
My question is: Anything else i can do to make my phone work fine again, and does it's possible to make the phone totaly stock? When i boot up, i've noticed that the phone, whit all rom i've try, said on samsung logo: Kernel is not sendroid enfonced, warranty status: kernel, so i can't go to return my phone on warranty whit that. How i can erase that line, and make my phone seem to be no modified?
Just to specify, it's not the first time i flash a phone. Do many flash, whit galaxy s2, s3 and s4, and sure, mine. Got try Cyanogen, stock, know how Odin work and all, try many rom, and before today, never has any problem to do turn back, but now, it's seem to be impossible.
Thank you very much for your help, very appreciated!
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
jd1639 said:
I would flash the stock firmware with odin again. After flashing do a factory reset in the stock recovery.
Click to expand...
Click to collapse
I've just try this. Flash the stock rom whit odin, and factory reset on original recovery after. Same, no wifi, no any sound.
Just see yesterday, when i'm flashing, i'm flashing on the bootloader in odin(whit the tar for the stock rom). Today, correct this by flash on the pda section, still not work. Found here on the forum the stock bootloader, rom, csc, and modem, but when i do this whit odin, odin said fail.
Thank very much, i think my phone is dead, and nothing to do to exchange it on warranty.
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
saj222 said:
I think Kies has an emergency firmware recovery mode.... maybe that'll work.
Found a nice guide here: http://forum.xda-developers.com/showthread.php?t=2261153
Click to expand...
Click to collapse
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
dardares said:
Just try this. Kies is the worst software i've ever see. The software completely freeze random. When i go to the emergency menu, never, kies recognize my phone here. I've tried to plug my phone, no recognized. Tried without plug it, no recognized. When i plug it, kies said connection in progress, and can stay here 30 min.
I'm a idea of what is my problem. Before do install of cyanogen, i've been applied the samsung official 4.3 update, whit knox. And, according to what i read on many forum, knox is not ereasable, So, it's completely freeze my phone, and nothing to do.
Anyone have the factory telus bootloader and other factory stock items because i want to put it stock.
Thank.
Click to expand...
Click to collapse
I've seen worse software, it's no better or worse than iTunes.
Sent from my SGH-I337M using Tapatalk
dardares said:
Finally get problems fixed by take the TELUS stock 4.3 ROM and flash it whit Odin. After, can flash cyanogen nightlies again and the phone work well again.
Whit the stock ROM, didn't see any line on the Samsung boot logo that i've rooted. After root this appear again. Knox regardless of ROM installed said 0x1.
If anyone have a fix to put it again 0x0 very appreciated otherwise the phone work fine and thank you very much for your help.
Click to expand...
Click to collapse
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
mps5566 said:
can u plz give me link for the flash file u just flash
i have same problem here after i flash with 4.2.2 no sound and phone freez all time
i like to flash 4.3 so i can fix my phone
thanks
Click to expand...
Click to collapse
This is the link i've found whit all the factory stock operator ROM. This is what rescue me.
http://forum.xda-developers.com/showthread.php?t=2269304
@Spacemonkie4207 never my itune was freeze, and i can do basic operation like transfer music or create playlist without any problem. My kies stay on connection in progress, and turn, turn, turn, but never connect. And when it connect, only one operation, and kies completely freeze, stop responding, need to close it, and open it again. Tried many cable, usb cable, reinstalling software, two other computer, but nothing to do.
I recovered back to stock from custom to 4.3 however if you do so, depending on carrier you could lose root and the ability to install custom recovery.
I would revert back to 4.2.2 (as it's knox free) go to samsungupdates (google it) and pull the 4.2.2 for your region and carrier. flash with odin 3.9
you'll lose root, but you can always perform again as long as not on 4.3 (with 4.3 u can still root if you remove all the knox stuff, u just lose warranty).
Az
I was rooted on 4.2.2 with Rogers but wanted to update to 4.4.2 and didnt really use the root anyway. So i installed back the stock rom and resetted to factory. But now wifi wont turn on at all. I ran the softaware update and im still on 4.2.2 and it says I have the latest version available but i know rogers released 4.4.2 in march 2014...
Anyway, which way should i go to get everything working again?
Thanks
I don't know if anyone has explained why this happens, but sometimes the modem firmware doesn't completely "take", leaving parts not working correctly. Reflashing the modem usually corrects this. In your case, where you want to upgrade to the latest firmware, you should download it from sammobile.com and flash it through Odin. Not only will you not have to worry about a software update, but installing the updated ROM through Odin should correct your WiFi issue as a new modem will be flashed with the firmware.
downloading now, i'll report back
fixed thanks a lot
I have SGH-i337 that does not respond well after boot. It does not respond to touches and gets stuck trying to Reboot or Power Off on the following OK button. It restarts by it self and hangs for many minutes on the At&T logo.
I have tried the ROM ALL_ATT_I337UCUFNB1_I337ATTFNB1.
I need help.
Have you tried a factory reset?
audit13 said:
Have you tried a factory reset?
Click to expand...
Click to collapse
Thanks for the reply.
I have tried Factory Reset. Originally it was on stock ROM I337UCUAMDL. I assumed the issue to be related to the firmware and I used ODIN to change from I337UCUAMDL to I337ATTFNB1. But I still have the same issue.
What else can I try?
You used Odin to update to NB1? The latest ROM from sammobile.com is MDL as AT&T only released ROM updates via OTA.
Was the phone dropped? Possible loose internal connections?
So when this phone was on stock fng2 firmware long ago when it was current firmware. I sent it off to a guy who was offering very cheap unlock. used it fine since then. but wanted to put stock rom on it and make it completely Samsung official with no problems. so it is ready for selling. but when I get the latest firmware which is ok3 and flash with odin. after booting in those crashes start happening about 2 times per second. phone is useless. I made it to settings menu and looked at baseband and software version both show unknown so I flash stock ok3 modem still samething. then I try these full firmware images:I flash od2, same thing oh1, same thing, factory reset doesn't do a thing on the rom with issues. then I try fng2 it works perfect. then I use use od2 oh1 ok3 update.zip to get ti to latest version and it works perfect. modems upgrade and work fine. but when on latest version I reset phone from the settings menu to factory default same issue after phone as booted. so currently phone is useless if it is ever resetted. so no selling. any solutions.
the issue seems to reside with the modem. probably guy messed up a lot of settings in service mode?
You name it I have tried it most likely
any ideas anyone?
anyway to reset nvram to factory default.
i have reseted it in service mode. were it says a golden backup exists. that didnt solve anything
I've tried many many things but nothing seems to work for that issue. Only way I've gotten around it is by doing a dirty flash of kitkat with odin.
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
I'm having a similar issue. This afternoon, 2 apps threw errors and closed. I rebooted, which apparently was the wrong thing to do. The reboot stalled on the AT&T logo and stayed that way for 5 min - the unit became very hot & the power button did not respond, even while holding it down. I got into recovery, cleared the cache and factory reset, then rebooted. The unit came back up and started reinstalling everything. I took it back down into the download status and attempted to reload 935x via Odin, only to stall at "initialzation" [sic] as you did. I got out of that after waiting for some sort of response. SuperSU was still in my apps as was Root Checker. Root Checker indicates the system is rooted. SuperSU indicates it needs the binary updated. BusyBox and TiBu indicate they cannot find root. I deleted all the root apps and tried reinstalling root via adb which completed successfully, but the same outcome with all the root apps. So I'm not sure if I'm still really rooted as Root Checker claims, or not.
EDIT: I just saw that I have 2 "Knox Settings" apps. Clicking on either returns, "Unfortunately, Container Agent2 has stopped."
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
NovaEDM™ said:
Hello, my SM-G935A is rooted, and I have 2 issues with it. Firstly, I'm unable to receive texts or phone calls (I can send them), and I've tried a factory reset and I even got a new SIM, but nothing worked. I think if I flash stock firmware, it might fix the issue. Second problem, when I go into download mode and select my AP in Odin and press start, my phone gets an error and Odin freezes at Initialization.
Any help would be appreciated. I would prefer to fix the texting issue, as I don't want to return the phone to ATT. In either case, the Odin issue needs to be fixed
Click to expand...
Click to collapse
I was having the exact same problem you had with Odin. It seemed I was able to flash stock firmware using this version of Odin: http://www.mediafire.com/download/2t2sjqxtogbkafk/odin_3.12.3.rar
rob219 said:
use the odin from the stock firmware thread to flash it again. if it fails you can flash the u firmware and then the stock again. then you have to use a different odin if you want to flash the root api file the one you flash the firmware with wont work. also there is help in one of the threads about fixing the volte problem so you dont have to turn it off to get calls. i didnt have to do it as using the odin i mentioned fixed it for me when i came from the u firmware.
Click to expand...
Click to collapse
did you have any problems with the u version of the s7 edge firmware, like the fingerprint scanner not responding? i am on that version and cant get any odin version or any version of s7 edge g935a firmware to flash, tried unrooting and was forced to use the U version of the s7 edge firmware, everything works except the fingerprint scanner, cant get back to full stock firmware, need help!
im having the exact same problem, when i put my phone into download mode and flash the stock at&t firmware, Odin get stuck in "initialization" and my phone screen displays and error message.
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
nicetucu said:
Same stuff was happening to me, I went back to stock and took the update. When your phone stops working as an actual phone, it's time to roll it back.
I played with it for a week and my phone was so freaking hot (with hot weather) equals a wait and see if this gets more stable in the near future. I did use the Odin 3.12.3 mentioned by King James III. Honestly, I did so many things to get it back to stock I forget what actually worked (it was the wee hours of the morning and I was spent). Don't give up guys, it will and can work.
edit: It may be as simple as not right clicking Odin and running it as Administrator.
Click to expand...
Click to collapse
I used Odin_v3.12.3_Patched_SHA256 to flash the 935U Firmware then used Odin3_v3.11.2 to flash the June Firmware release.