Ok, so I had a quick question before I do something stupid. I've been trying to install ROMs on my g900v but some fail, and some are successful. I do the same steps with all ROMs; wipe, install, boot. Some of them just won't install.
My question is: Do I have to have matching firmware or kernal installed prior to flashing the ROM for it to install successfully? (i.e. NK2 firmware on my phone would prevent a ROM made with NI2 firmware from installing)
thesmashippy said:
Ok, so I had a quick question before I do something stupid. I've been trying to install ROMs on my g900v but some fail, and some are successful. I do the same steps with all ROMs; wipe, install, boot. Some of them just won't install.
My question is: Do I have to have matching firmware or kernal installed prior to flashing the ROM for it to install successfully? (i.e. NK2 firmware on my phone would prevent a ROM made with NI2 firmware from installing)
Click to expand...
Click to collapse
Yes, have to be the same firmware version. You are referring to flashing through safestrap, correct?
Yes, using safestrap. So I have to have the matching firmware flashed before I attempt to flash there ROM? Also do I need to flash the kernel? Or does flashing the firmware include the kernal?
thesmashippy said:
Yes, using safestrap. So I have to have the matching firmware flashed before I attempt to flash there ROM? Also do I need to flash the kernel? Or does flashing the firmware include the kernal?
Click to expand...
Click to collapse
All you have to do is flash the firmware only tar nothing else. When you install whatever rom you want just boot into download mode after you install the rom then flash the firmware in odin. Each rom thread has the installation instructions in the op which should also have a link to the firmware needed for that rom.
Savagerun said:
All you have to do is flash the firmware only tar nothing else. When you install whatever rom you want just boot into download mode after you install the rom then flash the firmware in odin. Each rom thread has the installation instructions in the op which should also have a link to the firmware needed for that rom.
Click to expand...
Click to collapse
Ok, my issue starts before that then. I go to install, we'll say Optimal ROM since that's the last one I had trouble with, and it says failed on the install. I wipe, and I have the proper firmware installed beforehand, but it still fails. I'm stumped.
thesmashippy said:
Ok, my issue starts before that then. I go to install, we'll say Optimal ROM since that's the last one I had trouble with, and it says failed on the install. I wipe, and I have the proper firmware installed beforehand, but it still fails. I'm stumped.
Click to expand...
Click to collapse
Don't know why it's failing for you as long as you're doing a full wipe then flashing the rom (make sure the md5 matches on your rom download) then flash the firmware you shouldn't have a problem.
Savagerun said:
Don't know why it's failing for you as long as you're doing a full wipe then flashing the rom (make sure the md5 matches on your rom download) then flash the firmware you shouldn't have a problem.
Click to expand...
Click to collapse
So the md5 for the firmware has to match the md5 for the ROM I'm trying to install? I mean I'm not new to this stuff, but the newer everything gets, the more complicated it gets, ya know. new phone for me and its a little more complicated this time around.
thesmashippy said:
So the md5 for the firmware has to match the md5 for the ROM I'm trying to install? I mean I'm not new to this stuff, but the newer everything gets, the more complicated it gets, ya know. new phone for me and its a little more complicated this time around.
Click to expand...
Click to collapse
No what i was saying is after you download a rom you should check to make sure the md5 of that rom matches the posted md5 that's under every rom link. If your downloaded rom's md5 doesn't match what's posted then you got a bad download and you'll need to download the rom again till the md5 matches. Im thinking you have a bad download since you're failing installing certain roms. There's a few md5 checkers in the playstore or you can use a file manager like Astro file which i use to check my md5. That's the first place i would start if a rom failed to install.
Savagerun said:
No what i was saying is after you download a rom you should check to make sure the md5 of that rom matches the posted md5 that's under every rom link. If your downloaded rom's md5 doesn't match what's posted then you got a bad download and you'll need to download the rom again till the md5 matches. Im thinking you have a bad download since you're failing installing certain roms. There's a few md5 checkers in the playstore or you can use a file manager like Astro file which i use to check my md5. That's the first place i would start if a rom failed to install.
Click to expand...
Click to collapse
Oh, awesome. Thank you!
Related
Hello, I rooted my galaxy 4 yesterday with odin v.3.07 and flashed CWM. I erased as usual when you flash another rom, but when i try to install a rom it just say something like "Aborted". I can access CMW and download mode, but can't install a rom from CMW, and I don't have any backup. Anybody know what to do? My computer knows that the phone is plugged in as i can see it in the odin program.
SelassieI said:
Hello, I rooted my galaxy 4 yesterday with odin v.3.07 and flashed CWM. I erased as usual when you flash another rom, but when i try to install a rom it just say something like "Aborted". I can access CMW and download mode, but can't install a rom from CMW, and I don't have any backup. Anybody know what to do? My computer knows that the phone is plugged in as i can see it in the odin program.
Click to expand...
Click to collapse
Hi,
Try flashing a stock ROM.
malybru said:
Hi,
Try flashing a stock ROM.
Click to expand...
Click to collapse
§
Could you give me a link please? I'm afraid of downloading the wrong stock file since my internet is so slow hehe. My phone is model number: i9505. Do i flash it inside CMW or with Odin? I read something about flashing with odin, but on my other phone i've always used CMW
SelassieI said:
§
Could you give me a link please? I'm afraid of downloading the wrong stock file since my internet is so slow hehe. My phone is model number: i9505. Do i flash it inside CMW or with Odin? I read something about flashing with odin, but on my other phone i've always used CMW
Click to expand...
Click to collapse
Hi,
You will need to find the right one for your phone HERE
You must know the area your phone came from.
These seem to be zips,so flash with CWM.
malybru said:
Hi,
You will need to find the right one for your phone HERE
You must know the area your phone came from.
These seem to be zips,so flash with CWM.
Click to expand...
Click to collapse
Thank you, I found it. But when i tried to install roms with CWM before it just said "Aborted", maybe their is something wrong with CWM. I read something about installing with Odin, but then i'll need a .tar file or something like that
SelassieI said:
Thank you, I found it. But when i tried to install roms with CWM before it just said "Aborted", maybe their is something wrong with CWM. I read something about installing with Odin, but then i'll need a .tar file or something like that
Click to expand...
Click to collapse
You have to unzip this file and install the content with Odin.
After unzipping this archive you should end up witch md5 file and this is the file to put in to Odin
SelassieI said:
Thank you, I found it. But when i tried to install roms with CWM before it just said "Aborted", maybe their is something wrong with CWM. I read something about installing with Odin, but then i'll need a .tar file or something like that
Click to expand...
Click to collapse
Hi,
Maybe try installing a different recovery.
I heard sometimes these new recoveries need more than one go to install things.
Thank you, problem solved =)
So, that's a long story, but a few days ago I tried do flash one more time the CM11. It gave me an error like written below. I used the CWM 6.0.5.3 that supports MTD (flashed it with Odin - .tar.md5), all beautiful, but that's not about it.
When I returned to stock and tried to flash the CWM5 through native recovery and even flashed CWM6 (6.0.5.3) through Odin, it gave me the following error (in both cases, native recovery with every ZIP I tried to flash and CWM also):
"Finding update package...
Opening update package...
Installation <something>
Installation aborted."
After this manipulations, I can't even obtain root access on my phone and I have 3 apps installed, because it's out of memory. I heard that it could be because the file system remained in MTD and it is not compatible, but, if it's like this, how can I return to YAFFS2?
It does not install any ZIP, so I can flash nothing. Nor custom firmwares, nor other fixes (like root) and CWM also.
Please, help!
dushkalex said:
So, that's a long story, but a few days ago I tried do flash one more time the CM11. It gave me an error like written below. I used the CWM 6.0.5.3 that supports MTD (flashed it with Odin - .tar.md5), all beautiful, but that's not about it.
When I returned to stock and tried to flash the CWM5 through native recovery and even flashed CWM6 (6.0.5.3) through Odin, it gave me the following error (in both cases, native recovery with every ZIP I tried to flash and CWM also):
"Finding update package...
Opening update package...
Installation <something>
Installation aborted."
After this manipulations, I can't even obtain root access on my phone and I have 3 apps installed, because it's out of memory. I heard that it could be because the file system remained in MTD and it is not compatible, but, if it's like this, how can I return to YAFFS2?
It does not install any ZIP, so I can flash nothing. Nor custom firmwares, nor other fixes (like root) and CWM also.
Please, help!
Click to expand...
Click to collapse
Simply flash stock rom via odin - this will convert your file system back to rfs for use with stock based roms (cm roms use ext file system)
You can then root the phone and flash a temp cwm or a kernel of your choice for stock based roms with cwm built in
stock rom firmware is found on my firmware thread - Links either in signature or top of firmware thread
Tried it already on a lot if version (XXKI6, XXLK3 and another ones), not working, but I'll try one more time today.
dushkalex said:
Tried it already on a lot if version (XXKI6, XXLK3 and another ones), not working, but I'll try one more time today.
Click to expand...
Click to collapse
make sure you are using the firmware from my thread (the ones you have quoted are old firmwares) - they are wipe packs and will format your system when flashing
I would use this one if you are in Europe
http://d-h.st/FhE
Thx, I'll try it
marcussmith2626 said:
make sure you are using the firmware from my thread (the ones you have quoted are old firmwares) - they are wipe packs and will format your system when flashing
I would use this one if you are in Europe.
Click to expand...
Click to collapse
Tried, the same.
dushkalex said:
Tried, the same.
Click to expand...
Click to collapse
Then there is either a problem with the way you are flashing it or you flashed wrong files on your phone in the past and you may need to include the pit file with the rest of the firmware - you can find the pit file for galaxy y 5360 with an easy google search - there is an xda thread with it
All firmware on my thread is confirmed working and the Europe one I have used myself - So if using the pit file doesn't work along with the firmware file then I would take it to a repair shop
marcussmith2626 said:
Then there is either a problem with the way you are flashing it or you flashed wrong files on your phone in the past and you may need to include the pit file with the rest of the firmware - you can find the pit file for galaxy y 5360 with an easy google search - there is an xda thread with it
All firmware on my thread is confirmed working and the Europe one I have used myself - So if using the pit file doesn't work along with the firmware file then I would take it to a repair shop
Click to expand...
Click to collapse
Thanks Can I flash the .pit separately from the firmware?
dushkalex said:
Thanks Can I flash the .pit separately from the firmware?
Click to expand...
Click to collapse
you flash it all at the same time
PIT and your wipe firmware flashed at the same time haven't fixed it, the FS is broken. Any other ways or I have to prepare money for the service center?
try to format all partition ( data+system+cache ) and flash a stock rom
Hi guys,
i have read a lot of articles and tried a lot of combinations... problem still there.
My problem is on GT-I9505 when I start the phone, only after the first start after new firmware update, I could see for a second animated samsung logo but seems that is collorized (some red, lila colors on it ) and then black screen, vibration and restart. The blue light will blink all the time.
I'm able to get into download mode and recovery mode (if is called like that)
What all i tried - some of them:
-tried to install with Odin new/old firmware. Everytime it is successfully but the problem still there
-tried to wipe to the factory
-tried with odin also ROM to put (not sure if is possible this if phone is not rooted and it is not, because i don't know how to do that if i can't boot it)
Any help?
Tnx
You can't put a custom rom on it through Odin. You will need a custom recovery for that, which can be flashed with Odin.
Then you can flash custom roms. Google s4 twrp or i9505 twrp, you should get to the twrp site from where you can download the recovery and you can also find instructions.
GDReaper said:
You can't put a custom rom on it through Odin. You will need a custom recovery for that, which can be flashed with Odin.
Then you can flash custom roms. Google s4 twrp or i9505 twrp, you should get to the twrp site from where you can download the recovery and you can also find instructions.
Click to expand...
Click to collapse
Tnx for the answer. I have tried with twrp (i flash that recovery) but every time checking MD5 of ROM (zip) is failing. I also tried with zip.md5 file next to rom with content like : 11111xxsx3333 *file_name.zip
But is not working still...
specko1987 said:
Tnx for the answer. I have tried with twrp (i flash that recovery) but every time checking MD5 of ROM (zip) is failing. I also tried with zip.md5 file next to rom with content like : 11111xxsx3333 *file_name.zip
But is not working still...
Click to expand...
Click to collapse
Redownload the rom zip.
GDReaper said:
Redownload the rom zip.
Click to expand...
Click to collapse
In progress. Just to mention that phone is not rooted. I think that shouldn't be a problem ? And also debug mode is not enabled (because i can't turn on my phone)
Ah... I tried also another ROM. Still same.
Checking for MD5 file... (it took about 1,2 min)
E: Aborting zip install
MD5 does not match
Error installing zip file '/external_sd/.....
Updating partition details...
...done
specko1987 said:
Ah... I tried also another ROM. Still same.
Checking for MD5 file... (it took about 1,2 min)
E: Aborting zip install
MD5 does not match
Error installing zip file '/external_sd/.....
Updating partition details...
...done
Click to expand...
Click to collapse
MD5 errors are usually caused by the file not being downloaded correctly.
I know, but if i don't put I md5sum file nexto to the zip ROM, then immediately check error appears. I'm using check md5 app and i have checked the file also on SD card...
This S4 is from Austria T-Mobile...seems so hard to install custom ROM. I'm not able also from CWR to install from zip.
I tried also different ROM-s. Is not possible that all 5 zip ROM are corrupted in download. When i check with MD5 checker says OK.
Only what I could install from SD was Supers user.zip (that should be root phone)
If somebody has some suggestion I would appreciate otherwise i will give up.
My s7 edge got stuck at boot screen so i reflashed stock rom and rerooted then restored the backup i had, it said fail because of low memory while restoring the system and now when i try to reflash the stock rom on odin it says model dismatch fail.
If someone could help me fix this I'm willing to pay something decent, but not a whole lot lol
Re-download the stock rom and flash it
Meboyzram said:
Re-download the stock rom and flash it
Click to expand...
Click to collapse
i did that lol thats when it says "model dismatch fail"
Do you have custom recovery?
Do you have a custom recovery?
Do you have the right and the newest Odin Version?
Did you try it with another transfercable or USB-Port?
Do you have the newest samsung drivers?
Did you have any Odin problems like this before?
My suggestion:
Just do a full wipe on your phone. Downlad the newest Odin Version. Get your device into download mode (maybe try different transfercables or USB Ports and the newest samsung drivers) and see if it works now.
If yes, flash the right Bootloader and Modem for your device and then flash the rom you wanted to flash.
If this didnt work, (and you have a custom recovery) try to reinstall the rom without any backups via the recovery at first and check afterwards, if the device is now recognized by Odin.
Good luck
JustAnotherAndroid said:
My s7 edge got stuck at boot screen so i reflashed stock rom and rerooted then restored the backup i had, it said fail because of low memory while restoring the system and now when i try to reflash the stock rom on odin it says model dismatch fail.
If someone could help me fix this I'm willing to pay something decent, but not a whole lot lol
Click to expand...
Click to collapse
I guess you still have twrp installed.
1. Step: go to TWRP and wipe everything except your SD-Card
2. Step: enter download mode on your device and then plug your usb in (maybe try a different usb-port or even another computer, or another usb cable)
3. Step:Flash the newest bootloader & modem in one step.
4. Step: Enter TWRP again and flash the firmware.zip via the installation process
I dont have TWRP, but i got it fixed, somehow my roomate got it, thanks anyways guys
So all he got was my phone to turn on, im still having this model dismatch fail issue..
Maybe You're trying to flash wrong firmware? What model did You buy?(check box) and what firmware did You download?
If nothing works then download 7zip. And remove all files from that tar.md5 file and leave system.img only. And then try reflashing it.
This way no matter what device You connect it should force flash this image file. Although it might be dangerous (a tiny little bit) so first make sure that You have proper firmware for Your model.
ProtoDeVNan0 said:
Maybe You're trying to flash wrong firmware? What model did You buy?(check box) and what firmware did You download?
If nothing works then download 7zip. And remove all files from that tar.md5 file and leave system.img only. And then try reflashing it.
This way no matter what device You connect it should force flash this image file. Although it might be dangerous (a tiny little bit) so first make sure that You have proper firmware for Your model.
Click to expand...
Click to collapse
Yes, I've used these files multiple times before i did what i did, ill give that a try, if it works, i owe you.
If system.img by itself will flash successfully and Your phone won't boot then add slowly more files to that tar file (boot.img, recovery.img etc)
You could also try looking for a pit file for Your phone and then flash it with it. Pit file usually fixes most problems even broken partitions.
And make sure that You put that tar file in AP/PDA.
If nothing above works then send me screenshots of ODIN and the file that You're trying to flash. Maybe I'll notice something. But I hope You'll fix it
JustAnotherAndroid said:
Yes, I've used these files multiple times before i did what i did, ill give that a try, if it works, i owe you.
Click to expand...
Click to collapse
So I tried, and i get some invalid file error
These are the files that are in the AP one
https://gyazo.com/a72785631ad62d412a8c40eb464d3126
I found out my problem, i was still uing the modified version of odin that i used to root my phone
Hi
I have j500h with marshmallow android(i'm not sure about this spell?)
I wanted to flash the custom rom android 7 on my device.
When i want to flash the rom with twrp it write that there is no md5 file in zip file! And it don't do that
And i can't install cmw recovery on my device!
Im not professional user and im not really good at English.
By the way.how can i flash the custom rom android7 on my device without md5 file type!
Thanks to all!
amirizad_7436 said:
Hi
I have j500h with marshmallow android(i'm not sure about this spell?)
I wanted to flash the custom rom android 7 on my device.
When i want to flash the rom with twrp it write that there is no md5 file in zip file! And it don't do that
And i can't install cmw recovery on my device!
Im not professional user and im not really good at English.
By the way.how can i flash the custom rom android7 on my device without md5 file type!
Thanks to all!
Click to expand...
Click to collapse
Disable md5 check in twrp settings. Or you could just download the md5, it should be able to be downloaded with the ROM.
But you should be okay as long as you downloaded the right file for your specific device as long as you disable md5 check.
I can't remember where in the settings it is exactly but have a look in twrp and you will find it.
Any trouble leave a comment here and me or someone else will try help you further
garylawwd said:
Disable md5 check in twrp settings. Or you could just download the md5, it should be able to be downloaded with the ROM.
But you should be okay as long as you downloaded the right file for your specific device as long as you disable md5 check.
I can't remember where in the settings it is exactly but have a look in twrp and you will find it.
Any trouble leave a comment here and me or someone else will try help you further
Click to expand...
Click to collapse
Too thanks for your help
I update the tarp which is support aroma and install ROM odyssey note8 on my phone and it's my first experience about flash rom and it's amazing
Thanks to all