First I want to greet all the members of the forum. Congratulations.
My problem is the following:
While writing a text message with my cellullare I9505 is off and you are no longer on again, looking at the battery, I realized that it was slightly swollen and I replaced it.
But unfortunately the phone does not start and is recognized by the PC as Qualcomm HS-USB QDLoader 9008 even without the battery.
Doing a bit of research and THANKS to your forum I found that unfortunately the phone went HARDBRICK.
Reading I discovered that something could be done without equipment with QPST tools. The problem that I can not find the files for my phone model. In order:
- sahara.xml
-MPRG ... mbn
-xxx_msimage.mbn
I found the file but when I put them inside the device is not recognized.
Please give me a hand?
En I'd really appreciate it.
Best regards
hello. please send me the files at [email protected]
my gt i9505 is hard bricked,detected as dload 9008
Related
hi
Sorry for my English
I wanted to root my phone but made a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader
nobody knows how to help me?
It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?
same problem
i have the same problem and the same brick. Can anyone help us?:crying:
+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!
St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.
ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775
kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?
One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.
I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's
I need some help i tried flashing a firmware that was for a different type of lg leon and now my phone is completely dead, it shows in device manager as hs_usb qdloader 9008. Ive tried alot of things with no success. Please anybody with some good knowledge on fixing this problem without me needing to get something like a jtag box help me ive only had this phone a couple days
I have the same problem but no solution
wood909 said:
I need some help i tried flashing a firmware that was for a different type of lg leon and now my phone is completely dead, it shows in device manager as hs_usb qdloader 9008. Ive tried alot of things with no success. Please anybody with some good knowledge on fixing this problem without me needing to get something like a jtag box help me ive only had this phone a couple days
Click to expand...
Click to collapse
on the same boat still loking to find a solution
There is no real solution. You've fried your phone.
Go online and find a new lg Leon motherboard, its not hard at all to dismantle and place the new board.
Just make sure you buy the proper board for your phone, and don't flash software that isn't for your device specifically.
hi every one, i have SM G530w with FRP problem, then i managed to bypass it with method found in youtube.. but when i install update thru OTA in 100% phone restart then suddenly phone not powering on. itried to connet it with pc it was detected in Qualcomm HS-USB QDLoader 9008 .
i heard and found here solution only for other variants, i cant apply it yo my phone since my phone cant enter download mode.
please guide me to revive my phone, can someone create debricked image file for my phone SM G530w and share here, any help is much appreciated thank you.
azzir04 said:
hi every one, i have SM G530w with FRP problem, then i managed to bypass it with method found in youtube.. but when i install update thru OTA in 100% phone restart then suddenly phone not powering on. itried to connet it with pc it was detected in Qualcomm HS-USB QDLoader 9008 .
i heard and found here solution only for other variants, i cant apply it yo my phone since my phone cant enter download mode.
please guide me to revive my phone, can someone create debricked image file for my phone SM G530w and share here, any help is much appreciated thank you.
Click to expand...
Click to collapse
Post the problem in Q/A , help and troubleshooting
And ask moderatora to delete your post
Hey guys, I recently had an accident while trying to install stock firmware on my device. I tried to manually install a stock firmware ROM and in the middle of it the device just shut of. What I'm left with is a device which doesn't have fastboot or any other method of recovery other then through some qualcomm tools. The driver shows up as "qualcomm hs-usb qdloader 9008" on my computer. I tried following this guide https://www.droidsavvy.com/unbrick-qualcomm-mobiles/ and concluded that I'm stuck on the old hard brick and tried to follow the instructions but the problem here is that I don't think that I have the correct ROM file for QFIL because the firmware are zip files and not mbn as I think they are supposed to be. If anyone could help me with this in any way I'd really appreciate it, Thank you!
same as you man did you find a solution?
jesusloortega said:
same as you man did you find a solution?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...766-unbrick-easy-sdcard-t3833408/post77427426
Hi,
My wife's ZF3 died on saturday night, she was using it at night, next morning, it was completely dead, I have been trying to search what happened, but cant find an actual solution, when I connect it to a PC, or almost any PC (have tried 3 different) it shows as Qualcomm HS-USB QDLoader 9008...
I have downloaded the QFIL and have searched for several mbn files mostly downloaded from "Libra_QFIL_8953_...", tried with some of the partition and patch XML files I have found here, mostly downloaded from the 8675_W00 folder, and always receive the same SAHARA error...
I have some question, first would be, why did it fail by itself, I have seen some post saying they were trying to upgrade or downgrade the ROM and it crashed, that I get it, but my wife has no idea about OS and she did not certainly tried to upgrade or downgrade, so why it happened?
Second, will it work if I get the same model phone, download whatever files I need (emmc dump I think is called) and then update that to the bricked phone?
Can someone please help on this, I have barely no experience on this but want and can learn fast... I have read a lot of post from Wang1Chun and Saktis_STi but unfortunately, the later got banned and the necessary files were removed from the thread so I cant download those...
Please, any light or lead will be appreciated.
Thanks!