IT SAYS "RUNNING OPEN RECOVERY SCRIPT" AT THE TOP. THEN AT THE BOTTOM IT SAYS
"UPDATING PARTITION DETAILS
FULL SELinux is present
Simulating actions.......
Then there is a progress bar that is about 80% full.
Download works, but know odin dosent recognize my tab any more. It did, I just rooted it a few days ago
Samsung Galaxy Tab 4 sm-T230nu
Hi,
I'll have your thread moved to your device section.
Good luck!
Try flashing a stock ROM from sammobile.com
Sent from my SM-T230 using XDA Free mobile app
Related
I've searched and searched the forums since last Friday but I am still unable to find a resolution (if any) to my issue so I apologize if this is a repost.
I went to flash my Note 3 last Friday and ended up with an "ext4 image invalid" error. When trying to reboot, my phone will only enter recovery and download modes (basic power up shows Firmware Error Upon Upgrade message). When I wipe the cache and factory restore, a basic power up will sit on the "Samsung Galaxy Note 3" title screen. I've tried reflashing other ROMs but I either end up with the ext4 error or another error (apologize as I'm not near my computer right now).
One big thing I forgot to do is to turn off the Reactivation Lock before the original flash which I think is causing my errors but I cannot boot up now to turn it off. I've also tried to recovery through Kies 3 but its saying that my device isn't supported. I have no backup files.
Is there any way to get my Note 3 back up and running?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
BTW, this is what I was working with before flashing:
PDA n9005xxubmhl
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Did you have a Nandroid backup in recovery?
Look on DjeMBey thread in android dev section of this forum. Download one that you can flash with CWM...
Also try flash a full stock rom with Odin?
Sent from my SM-N9005 using Tapatalk
BTW, this is what I was working with before flashing:
PDA n9005xxubmhl
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
did you manage to fix it? what rom did you try to flash?
Try this pal, hopefully it will work
http://forum.xda-developers.com/showthread.php?t=2613374
[SOLUTION] Successful flash of leaked NA6 ROM on Hong Kong 32g N9005
Sent from my SM-N9005 using Tapatalk
Hi Everyone:
I was new to Android, not very new but I did a stupid thing.
My device is SGH-1337 but I use TWRP to install a custom ROM for I9500....now I can still access to TWRP manul and Downloading page (? press volume down and power, then volume up). But once I reboot to system it would stuck at "Galaxy S4" log.
Then I tried google something (that time I still confuse with 1337 and 9500), then I tried few time Odin, but all with 9500 tar files and all result in "Fail".
I didn't backup my system...so now what should I do? Should I download a ROM for Att then flush with TWRP?
Many thanks.
How old is your phone? If you have twrp installed then its older than mine that came with mf3 firmware locked in.one idea is to download a new rom..for the right phone and copy and paste to an micro sd card..turn the phone off and insert card....reboot back to twrp.find the zip on yhe card and install.just 1 idea...
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
jasas212 said:
How old is your phone? If you have twrp installed then its older than mine that came with mf3 firmware locked in.one idea is to download a new rom..for the right phone and copy and paste to an micro sd card..turn the phone off and insert card....reboot back to twrp.find the zip on yhe card and install.just 1 idea...
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I brought it when it released, early this year.
Thanks for your hint, let me give it try tonight.
Let me know if that works good luck
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
jasas212 said:
Let me know if that works good luck
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed http://forum.xda-developers.com/showthread.php?t=2370121
but...after reboot it says "system software not authoorized by AT&T has been found on your phone."
WWWXXX2 said:
I flashed http://forum.xda-developers.com/showthread.php?t=2370121
but...after reboot it says "system software not authoorized by AT&T has been found on your phone."
Click to expand...
Click to collapse
You have to flash the loki patch after flashing a ROM. Use the search, i'm not sure what section it's in.
DeadlySin9 said:
You have to flash the loki patch after flashing a ROM. Use the search, i'm not sure what section it's in.
Click to expand...
Click to collapse
Yes, I was seraching it
Once I update the loki and kernal I can boot to the system..
But once I restart it would stuck at "Samsung" logo......
I tried again in following order:
Install the Rom from TWRP
"not ATT authorized software"
install new kernal
install loki
WWWXXX2 said:
Yes, I was seraching it
Once I update the loki and kernal I can boot to the system..
But once I restart it would stuck at "Samsung" logo......
I tried again in following order:
Install the Rom from TWRP
"not ATT authorized software"
install new kernal
install loki
Click to expand...
Click to collapse
The TWRP got some issues, it asks about passwork which I don't know
Then it always cannot mount system once restart....
If you are stuck on the white "SAMSUNG" screen with the padlock after flashing a rom, then your issue is caused by TWRP. Flash another recovery like CWM.
Nurmi_CEO said:
If you are stuck on the white "SAMSUNG" screen with the padlock after flashing a rom, then your issue is caused by TWRP. Flash another recovery like CWM.
Click to expand...
Click to collapse
Now I am really desperate....
I install CWM from TWRP, and now I cannot boot to recovery, it would stuck at "SAMSUNG" screen with some blue line on left top conner.
Then I tried to use Odin to flush another CWM into it, then Odin said "FAILED" and phone said "SECURE CHECK FAIL"....
I did a lot of search these two days, but none of their thread is helpful....
Any help and idea would be very welcome
Thanks
Phone information:
Model number: SAMSUNG-SGH-I337
Android version: 4.2.2
Baseband version: I337UCUAMF3
Kernel version 3.4.0-812098
Unlocked, Rooted with 3rd party software, show "samsung custom” every time when turned it on, then AT&T logo...
Want flash "danvdh google edition 4.4.2 ROM", and already transfer it to sd card.
Installed rom manager. Want to backup rom before flash, can not do it. When select "backup curent rom", restart, top left showed “recovery booting”, then saw a robot laid down with "!", showed "no command" under the robot. up showed:
#manual mode#
-- Applying muli-cs ...
applied the csc code: att
successfully applied multi-csc.
Top left showed some like
android system recovery <3e>
...
reboot system now
....
apply update from cache.
When select reboot, showed "error" first, then reboot.
Please give some suggestion, Many thanks!!!
You can't use clockwork mod with MF3. You have to use safestrap. Did you follow any if the walkthroughs?
Sent from my SGH-I337 using XDA Premium 4 mobile app
Thx for the reply.
Is there some manual to follow?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Unfortunately the Manual is named READ-READ-READ--
There are several threads in General and Q&A that will cover all you need to know about SafeStrap
Best to read them all as no one thread has everything--
Follow these closely or you can brick
Personally I read the OP pages and first/last 20 pages, or more, of any new rom etc I want to flash
People seriously need to start reading -.- all the questions on here are referring to not being able to get into recovery when they are on mk2 and mf3. It's all over stating there's no custom recovery for them yet we get posts like this -.- just read. It's not that hard.
Sent from my GT-I9505 using Tapatalk
Hi I rooted my brothers Verizon Samsung Note 3 which was on 4.4.2 NC4, Installed the safestrap recovery and have setup Hyperdrive on rom slot 1. My problem is when I try to access the stock rom slot it hangs at the Verizon logo. I've pulled the battery and same result time after time. I flashed a prerooted de-odexed 4.4.2 nc4 stock rom to the stock slot and it still hangs at the Verizon screen. Today I tried to do a factory wipe on the stock rom slot to see if I could flash another rom to it and it said it could not mount /system and /systemorig. Can anyone provide some info as to how I go about fixing this so he can have his stock rom back? Thank you.
Odin back to a stock ROM, non-rooted. If you want to, you'll have to start the root process from scratch.
Sent from my SM-N900V using Tapatalk
That's what I figured the answer would be. I do have a 4.4.2 NC4 non rooted stock to flash. Thank you for your help.
Sent from my SCH-I605 using XDA Free mobile app
One thing you might try first. I don't know about your initial problem getting stuck at the boot screen. But I tried the other day to do a complete wipe and wound up with the "unable to mount" errors. I had to go into the Mount screen in safestrap and uncheck all boxes, then recheck everything. For some reason, I had to click the System box several times to get the checkmark to show up. Might be worth a shot. Helped me avoid the hassle of having to odin back to anything
When I setup the 1st custom rom on the sd card I accidentally did a full wipe and after that I've been getting unable to mount errors like you stated. I will try that this weekend when I see him. Thanks again for the help and I'll report back with the results.
Sent from my SCH-I605 using XDA Free mobile app
Clicked system for 10 minutes and the check mark will not show up.
Sent from my SCH-I605 using XDA Free mobile app
Sorry to hear that. I wish I knew more about the error. Or the "mounting process" that seems to have failed. It was only by luck that I figured it out on mine. I was already downloading the files to odin my phone back and start over when I lucked out. Figured I would pass it along before you had to lose all you had done. But I'm not sure what else you can do at this point. Maybe someone else will chime in.
I was able to successfully recover from a "hang at the Verizon logo" soft-brick on my NC4 4.4.2 Note 3 by following the directions in this thread: http://forum.xda-developers.com/showthread.php?t=2483380 It seems like it might be worth a shot.
I tried flashing 4.4.2 NC4 non rooted and now it just hangs at the Verizon screen. When it boots up it still shows the custom logo under the Samsung Note III logo as well. What can i do or is it time to get a new phone? Thanks.
Sent from my SCH-I605 using XDA Free mobile app
MustangCobraGTMan said:
I tried flashing 4.4.2 NC4 non rooted and now it just hangs at the Verizon screen. When it boots up it still shows the custom logo under the Samsung Note III logo as well. What can i do or is it time to get a new phone? Thanks.
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
i'm having all the same issues you are... I cant even install new custom modified or non note 3 apks... you may have to factory reset one more time after ODIN.
I can't even get into recovery to factory reset it. We destroyed it. Lol. Just going to buy a new phone.
Sent from my SCH-I605 using XDA Free mobile app
Replaced the phone but I'd still like to see if I can fix this one.
Does anyone have a prerooted 4.4.2 NC4 tar.md5 or other tar.md5 that I could flash in Odin? I have tried the stock 4.4.2 NC4 tar.md5 and it still just hangs at the Verizon screen and it just reboots when I try to enter recovery to factory wipe it. I have the 32g pit file already. Thanks.
Sent from my SCH-I605 using XDA Free mobile app
i was following a thread to get CWM and eventually android 4.4.4 onto the stupid phone http://www.trueandroid.com/2014/07/update-at-galaxy-s4-sgh-i337-to-android.html
i used a program to load teh CWM boot loader and then had it restart the phone. however, something got jacked and now my phone is stuck in a recovery boot loop.
running nc1 software at&t. non-rooted (kot49h.i337ucufnc1)
odin just fails trying to flash philz_touch_6.08.9-jflteatt.tar.md5
all i get on the screen is the system recovery menu and a android guy on the screen with "No command." message
any options from here ? i just did a keis backup of the phone before i left the house today (about 2 hours before i f'd up this phone).
please help, thanks !!!
i got the same problem.
it says "firmware upgrade encountered an issue".
i got it after i tried flashing "CF-Autoroot" via ODIN.
i wonder what went wrong.
how do i resolve this problem?
PLEASE HELP! :crying:
gt-i9505
I actually just let the phone sit at the recovery screen and it came back up.
I originally used towel root and rom manager to try and load the cwm software.
Back to square 1 tomorrow
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
egiblock said:
I actually just let the phone sit at the recovery screen and it came back up.
I originally used towel root and rom manager to try and load the cwm software.
Back to square 1 tomorrow
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
sir egyblock, how is yours doing?
right now i'm downloading the stock rom from sammobile. 4.4.3
i'll try to flash it via odin. hope it'l work.
since everyone here is busy, i guess
can't get any info
Didn't do anything more over the weekend as it booted back into the normal os. Still running att 4.4.2.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Can u get into download mode?
yes, the phone is functioning normal again.. i can get it into download mode.