Related
When I originally bought the Nook HD+, I made several futile attempts to get ADB working so I could sideload apps to it. I was so frustrated that I was ready to give up and return it. But I finally got it going and with the help of a few smart users here was able to get it rooted and installing apps directly on the device. So, to save some other users the same frustration I had, I thought I would outline what I did to make this device hum.
Update 12/27/2012: A lot has changed since I first created this tips thread. I am updating it to the latest information. Most of the steps below are not necessary anymore since I now have a new thread here which lets you do these things easily with a special version of ClockworkMod (CWM) recovery for the HD and HDplus. And the text here has been modified to reflect that and include the HD.
Update 11/02/2013: Since B&N has included the gapps and Play Store in version 2.1.0 and above and since verygreen developed the new boot.img that removes B&N /system file protection scheme and I updated my HD/HD+ CWM thread to account for those changes, I decided to give this thread an update. I have added comments to the sections in italics below where necessary
If you have questions or comments on this post, reply to this thread. Please do not send me private messages or emails. By posting in the forums others get a chance to help you and if I answer your question in the forum, others can see my response and it may help them too.
1. Setting up ADB
ADB is very useful for many things but you do NOT need ADB to root anymore. Look at my thread referenced above to use CWM to root.
Also, rather than use ADB via USB, it is much easier to use a Wireless ADB app available in the Play Store.
If you want to know how to set up ADB with USB, click on the "show content" button below.
The first thing you need to do is get ADB working on your PC so that it can connect with the HD+. The instructions to do that is on B&N's own site here. (But you really don't have to do all that, see below). To make it easier for XDA users, I have attached to this post the drivers downloaded from B&N site. Download and unzip that file to your PC.
To install the drivers, do the following (I tested this on Windows XP and Windows 7):
1. On your HD+ go to settings, device information, developer options, and make sure check "Enable ADB" is not checked.
2. Plug in the device to the PC with the USB cable. MTP should install.
3. Unplug the device, go to settings again and check 'Enable ADB'. Plug back in.
4. New devices will try to install. When they do, work your way through the options until you get to the choice "include this location in search" (the terminology is a little different in Win7) and browse to the location you unzipped the driver files above. Continue and the driver should install. In Windows 7 just one device will pop up. On Windows XP, two may. (Edit: If you are having trouble with this step, go to the B&N link I have above and read and follow section 4.6 of that guide. You can skip section 4.6.2 since you unzipped those drivers earlier. But do all of the remaining steps in section 4.6).
5. An "Android Composite ADB Interface" will install. If the computer says it needs to reboot to finish. Do it.
6. If, when it starts back up, and after installing ADB below, it does not work, you may need to go the Device Manager and look to see if "Android Composite ADB Interface" device has a yellow exclamation point by it. If it does, update the driver with the B&N driver again.
7. Create a file named adb_usb.ini and put 0x2080 in it with no line feed or carriage return. Go to \documents and settings\ and open your users folder and create a folder named .android and put that file in it.
8. I have attached a file named adb.rar below. Just unrar the adb.rar file. There will be three files there that you can put in a directory (any name you want).
9. Open a command prompt and cd to wherever you copied those adb files. If you set your path to that directory, you can have the prompt set for any directory, like where your apks are stored. Type 'adb devices'. It should go through some commands ending with a list of devices connected. The serial number of your HD+ should be listed. You can now run ADB commands.
2. Sideloading Apps
Once Unknown Sources is activated by my CWM zip above, you do not really need to install apps this way anymore.
Once you have ADB connected to your HD/HD+, it is very easy to sideload install apps. Just have your command prompt set to the location that you have your apk's stored and type "adb install xxx.apk", where xxx.apk is the name of your app. It is best to name the apk to something simple with no underlines or special characters in the name. It does not matter what you name it, the real name is inside the apk. The app should install. I would start with a launcher app since sideloaded apps cannot be seen in the stock launcher. Then I would install AnyCut which I have attached to this post. This app allows you to put the Home command on your launcher's home screen so that after you make your launcher default, you can get back to the B&N home page. There is a trick mentioned in the B&N guide referenced above that lets the stock app drawer see your sideloaded apps. On the Apps screen, hold the volume up button while you press the "Apps" word at the top of the screen for 2-3 seconds. An "Extras" screen will pop up showing all of the sideloaded apps. You have to do this every time you want to see it.
3. Rooting the HD/HD+
Rooting is now very easy using CWM in the referenced thread above. If you want to use the older manual method, click on the "show content" button below. But be warned these older methods no longer work on version 2.0.5 or newer.
Verygreen came up with the original scheme to root the HD+. But it had a problem. The HD+ checks on boot to see if /system has changed, and if it has, it will not boot. It tries this 8 times and on the last time the "8 failed boot" procedure kicks in and your device is wiped clean (including your storage space) and the factory ROM is re-installed. He later modified it to survive a reboot. Someone0 developed another scheme where he can root without modifying /system directly. So the next time it boots, it boots normally. See his thread here.
ONCE YOU HAVE ROOT, DO NOTHING THAT MODIFIES /SYSTEM OR IT WILL NOT BOOT AND END UP RESETING ITSELF. Also do not install anything that installs to /system, like busybox, AdFree and a few other apps. Ignore this warning with Universal Root rev3 or higher.
4. Setting OTA (Over the Air) Updates from B&N to Manual
When you first register the HD/HD+ it will automatically update itself to the latest version. To protect yourself against further updates that might jeopardize your ability to root or add other mods, you should try to block further automatic updates. But it seems that making this mod is no longer effective, B&N updates anyway.
Again, I have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
EDIT: (2/22/13) I have a new way to block OTA that seems to work so far. Another user (thanks greenya!) discovered this and I have come up with a way to implement it. I use the app AdAway to put my own black list of sites to not allow access to. If you want to try this, you must be rooted. Get AdAway either on the 1mobile.com market or at its developer's site (http://code.google.com/p/ad-away/). Before you do anything go to its preferences and change the target hosts file to /data/data/hosts. That way it will not reset the device. Then go to "Your Lists". Add this site to the black list: su.barnesandnoble.com. Then go to the main menu and select "Download files and apply ad blocking". It will ask you if you want to add a symlink, say yes. (If you installed the new boot.img from verygreen or flashed my latest version of Universal Root (rev3 or higher), you do not need to worry about adaway resetting your device. Just install it normally.)
It does not seem to block any B&N shopping or downloading apps or books. I installed this on my 2.0.5 and purposely tried to update and it says it needs the update but pushing download does nothing. Then I unblocked it and pushed download and it started to download immediately. So it does work.
Basically the same method used on the Nook Color and Nook Tablet should work on the HD+. It requires that you edit a database file and that requires root access. I use the paid Speed Software's SQLite Editor. You need to use the latest version (2.0.1). I could not get my older version to get root access.
So here is a description on how to do it with SQLite Editor. Open the app and it should get granted superuser access. Then browse with it to /data/data/com.bn.devicemanager/databases. There should be a file there named "devicemanager.db". Open that with SQLite Editor. There should be a list down the left side, one being "registry". Click on that. A table opens up that looks like a spread sheet. On line 6 is com.bn.device.fota.mode. Scroll across till you see the value column. It should say auto. Edit that to manual. Save the database and you are done.
This worked on the other Nooks, so should work here. See the post below for another automatic method.
5. Setting Up Installing from Unknown Sources
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
You can toggle the unknown sources using the same method as I used for blocking OTA. Just look for the database in /data/data/com.android.providers.settings/databases. The database is settings.db. Open secure and line 4 - install_non_market_apps and change the value to 1.
6. Setting up Google Play Store and Google Apps
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below. If you have stock version 2.1.0 or higher you do not need to flash my zip. Play store is included in the ROM.
Someone0 has a post on how to add Google Play Store is here. And he now has it so you can install the entire Gapps package, including Play Store. Again, you must be rooted first.
7. Setting LCD Density
If you are like me, you hate the tiny fonts on these high resolution devices. You can change the default lcd density to help with that. The default lcd density for the HD/HD+ is 240. I changed it to 300 and everything works fine on the HD+ and fonts are a little larger. But you cannot modify build.prop on /system to do that. It will cause the device to reset itself since you are modifying /system. To get around that, create a file in /data named local.prop. Add the following line to that text file:
qemu.sf.lcd_density=300
Then reboot and your new density is set. You need to be rooted to do this on the device.
I found that changing the density on the HD made the SystemUI app crash. If you want larger fonts for the HD, I recommend you use the tip in the next section.
8. Larger System Fonts
If you don't want to set your LCD density higher but you still want larger fonts, a user (Windsor1959) just passed on this tip. Go to the B&N app store and install the free app Go Read. Once that is installed, open it and use the menu to go to accessibility settings. There is an option for larger system fonts. It works great. Thanks Windsor1959.
I also just discovered that there is another hidden setting that lets you set the system fonts from small, normal, large and huge. To get to these settings you need a third party launcher like zeam or adw and the AnyCut app I attached below. On the launcher screen long press and select shortcut. Select AnyCut from the list. Within AnyCut select activity and scroll down to fonts. Select that and a fonts shortcut will appear on the launcher screen. Open that and you can select the font size.
9. Data structures on the HD/HD+
For those of you used to having two separate partitions for data and media files, B&N has used a different scheme for the HD/HD+. They make one very large /data partition ranging from 5GB to 28GB depending on which device you have. Then they create a folder in /data (/data/media) and, using the sdcard fuse feature, link it permanently to /sdcard. So that means it is one big dynamic space for both /data and /sdcard, sharing the free space. /data is considered root and /sdcard is not.
They named it /sdcard because a lot of third party apps expect there to be an sdcard on the system and won't run unless there is one. That creates a little bit of a terminology problem for us Nook Color users. We are used to having /sdcard be an external SD. And on top of that, if we do add an external SD, it is mounted as /ext_sdcard under /mnt and that is hard for some apps to see. And when you connect your device to your PC with MTP, internal media (sdcard) is called 'internal memory' and the SD (ext_sdcard) is called 'SD card'. I think B&N did this with the expectation that users would not be rooted and be able to see that stuff under the hood.
Since sdcard is really just a part of /data, it is formatted as ext4 instead of FAT32 like the Nook Color media partition was. That means you can store a single file larger than 4GB, which is the limit for FAT32. Most external SD cards are formatted FAT32 so they are also limited to a single file size of 4GB. But it makes them directly readable by your Windows based PC. When you first put a new external SD in the HD/HD+, it asks you if you want to reformat it so you can more easily store your media files. If you say yes, it will format it to ExFAT, a new flash drive format that supports larger file sizes. That's good for your media files since you can have very large files on it. But it could be bad if you want to take the card out and put it in your Windows XP PC because XP cannot read it without an update patch from Microsoft. If you have Vista or higher, ExFAT can be read natively.
When you do a factory reset (clear /data) your media directory (/sdcard) is wiped out too.
Also, the B&N media, books, magazines, etc., are stored in /data/nookmedia, which is root.
10. White on White Text for Some Apps
One of the annoying issues with using some third party apps is the HD/HD+ displays some dialogue boxes with white text on a white background so that the text is unreadable. Someone0 and I developed a patch that can repair this. I have a zip in my CWM thread referenced above to repair the HD+ and HD. (Also since stock version 2.1.0, B&N has dramatically changed the color scheme so that the white-on-white issue is no longer the problem it used to be, I have discontinued providing white-on-white mods for version 2.1.0 and above.) If you want to see how to do it manually, click on the "show content" button below.
Someone0 and I have been working on this and have found a solution. It requires a modification to the framework-res.apk on /system. And the mod works very well. The problem is that the apk is on /system and must be symlinked using our symlink trick we use on /system files when we need to modify them. That is easy to do, but this particular apk is very critical to your system. If you do not get it installed properly, it will lock up the device and you either need to reset it completely or repair with ADB.
If you are tech savvy enough you could modify your own apk and install it. In the colors.xml file in the values section of the de-compiled apk, are two settings that need to be changed, "background_light" and "background_holo_light" need to be changed to "ffcfcfcf". The color choice was a compromise between making the text dark enough to be seen against a white background and bright enough to make things like menus show in the grey backgrounds. Re-compile and put the apk in /data, delete the apk in /system and symlink to the one in /data. The problem with doing it manually while running is as soon as you delete the apk, things go bonkers. And you cannot add the new symlink until the original apk is deleted. If you start messing with this mod, be sure to have ADB enabled so if it locks up and gets stuck on booting, you can access things with ADB and hopefully repair it. When I did my system manually, I copied the modded apk to /data with root explorer, used root explorer to set /system to read/write, then used ADB to delete the apk in /system and create the symlink. If you mess up, it will boot, but get stuck at the 99% level. Hopefully if you left ADB enabled, you can use ADB to repair whatever is wrong.
11. Implementing Userinit.d
Userinit.d can be used to run specialized scripts as part of the boot process. The HD/HD+ does not implement userinit.d, but it can be modified to allow it. And these scripts can be used to customize the performance of the device, like modify fonts, change colors, add symbolic links, modify drives, set CPU speeds and tweaks, etc.
I have implemented userinit.d in the new Universal Root zip in my referenced CWM thread above. (The latest version no longer uses it).
The scripts are usually named with numbers at the beginning and no extension. Examples would be the scripts from CM7 init.d which are: 00banner, 01sysctl, 03firstboot, 05mountsd and others. They are executed in the order of the numbers. They are plain text files that have as the first line:
#!/system/bin/sh
Then they have script commands in text format.
The beauty of these scripts on the HD/HD+ is you put them in /data instead of /system which would reset your device. Put the script files in a new folder named /data/local/userinit.d. Set the script file permissions to execute.
There are examples of userinit.d scripts out there if you search for init.d scripts on XDA or the web. Some will work on the HD/HD+ and some won't. I have a great example in the next section.
12. Swapping "sdcard" and "ext_sdcard"
I now also have this modification as a flashable zip in my CWM thread linked above. No need for root with that one.
As explained in section 9 above, the internal media is named "sdcard" so that apps can store their files there. Some users would like them stored on their external SD. I have a userinit script that will swap "sdcard" and "ext_sdcard" so that apps will store their files on the external SD. The external SD will show as "sdcard" and the internal media will show as "ext_sdcard". And it shows swapped using MTP also. It can be a little confusing since we cannot control the names, but they are swapped. If you don't have an external SD plugged in, both sdcard and ext_sdcard will show the internal media.
To swap the drives, make sure userint.d is implemented, then download the attached file, 11SDswap.rar, and extract it and put the file in /data/local/userinit.d. Set the permissions of the file to execute in all three boxes. On the next reboot, they will be swapped. To return to normal, just remove the file and reboot.
13. Skipping OOBE (Out of Box Experience)
Skipping OOBE is when you want to skip the registration step when you first start your device or after a reset. Not registering means that you will not be able to buy books or apps from B&N or, if you already have an account, have access to already purchased items. Your name will show as TEST (which can't be changed). And, if you set up wifi, the device will still check for updates and if found, update.
So if you don't want to register, or that device is already registered to someone else and you can't, just skip OOBE. There are instructions for the Nook Color here. They still work for the HD/HD+.
14. Back Up Your Stock ROM Installation with CWM v6.0.2.8 for Nook HDplus and v6.0.2.7 for the HD
Now you can backup your stock installation with my bootable CWM (ClockworkMod) recovery SDs. That way you can restore if you make a mistake and change /system so the device starts to reset itself. Just catch it before the reset completes, insert the card and restore and you will be back to OK.
You can do anything with these CWM SDs you normally would do with CWM, (nandroid backup, wipe system, data, cache, dalvik-cache, fix permissions, etc).
One of the nice features is you can wipe /data without it wiping your internal media at /data/media. So, if you want to reset, just wipe /data and your media files are still left intact. And when you do a nandroid backup, it can be placed either on internal media or your external card. The nandroid backup feature backs up /boot, /system, /cache and /data (without the media folder). So if you want the media folder backed up you must do it manually from within stock. And when you restore, you can selectively restore any partition. So if you mess up /system by putting something there that causes a reset, just selectively restore /system.
EDIT (5/22/13) - There is a new procedure brought to my attention by another user (thanks fanoush) which lets you make the CWM SD without burning the image. It seems the OMAP4 devices are a little more liberal on the booting requirements than previous OMAP devices. This makes it easier to install on any size SD. Go to my HD/HD+ CWM thread linked in my signature and look at item 1a. There are instructions and files there.
The versions attached below are under 120 MB so they can be put on any size SD. It burns very quickly. But there is no room there for any backups. After burning the SD you can use partitioning software (like Mini-Tool Partition Wizard or EaseUS Partition Manager, both free) to expand it to the full size of your SD card if you want so there would be plenty of room for backups. But be sure to only expand the back end of the partition, being careful not to touch the beginning.
I also now have a 4GB versions for both the HD and HDplus attached to the CWM thread referenced above.
To make the SD, download the version for your device and extract the file. It should be a 120MB .img file. Burn (write) that image file to your SD card using Win32diskimager in Windows. In Linux or OSX (Mac) use the "dd" command.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first). With the small version it should burn fairly rapidly. If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
Insert the SD into your powered off Nook HD/HD+ and power on. It should boot to CWM with the label v6.0.2.8 for HD+ stock. The HD version just says v6.0.2.7 for Stock. You can tell it is booting properly if the cyanoboot logo shows up after the Nook logo shows for a few seconds. If the Nook logo stays there and starts changing, it means it is booting to stock. Hard power off by holding the power button for several seconds. Try again.
Manipulate the controls with volume up/down for cursor, n key to activate and power key for back.
15. Modifying System Files on the HD/HD+
Ordinarily you cannot modify system files on these devices because they will detect the change and reset themselves back to factory stock, wiping out all your data at the same time. But there is a safe way to do it if you are rooted.
If you have installed my new Universal Root rev3 or higher or installed verygreen's boot.img, the below procedure is no longer necessary, just modify the files directly.
The HD/HD+ has a manifest file included in the boot files that has a listing of each file that is supposed to be in /system and a checksum of each file. On boot, it reads the files in /system and makes sure each file that is there is on the list and matches the checksum. It ignores directories, symlinks and missing files. If one is added or has the wrong checksum, it stops and tries to boot again. If it reboots 8 times in a row without completing the boot, the automatic reset feature kicks in and your device is formatted and the factory ROM is reinstalled.
So you can see that missing files are OK and symlinks are OK. So if you want to modify a system file, first copy it to /data somewhere, delete the original, and make a symlink in /system to replace the deleted file. The symlink points to the file copied to /data. But be careful, some files, like framework-res.apk, are being used all the time and if you delete it, even temporarily, the system goes crazy.
The scheme that someone0 and I use is to mimic /system under /data/su so that the structures are the same to avoid confusion. For example, if you wanted to modify build.prop, it would be copied to /data/su/system/build.prop and the symlink would point there. Since build.prop is not used very often, it is safe to now modify it however you want. But be careful, some settings there are vital, like hardware rotation. Mess with that and things will go all wonky on the next reboot.
Here are the specific commands to make this happen using build.prop as an example:
1. Use your root file manager to copy /system/build.prop to /data/su/system/build.prop. Set the file's permissions to match the original.
2. Delete /system/build.prop also using your root file manager
3. Set up Terminal Emulator. Start the program and type su enter. After you allow superuser access, the prompt turns to #
4. Type the following command at the # prompt (without the quotes):
"mount -o remount,rw /system"
5. Then this command:
"ln -s /data/su/system/build.prop /system/build.prop"
(That first letter is a lower case L)
6. Then this command:
"mount -o remount,ro /system"
You are done. You can now modify build.prop in /data any way you want and the system will not reset.
But before you do this mod or any other system file mod, I recommend you have backed up your system using CWM as described in the previous section. That way if you did not get it right somehow and it starts to reset, you can insert your CWM card to stop the rebooting and selectively restore /system and try again.
One side benefit of doing this build.prop mod is if B&N tries to update you in the future, it will fail because it cannot verify your build.prop because it is missing. And, in my experience, it does not try again.
16. Nook HD/HD+ internal partition structure and backups
The partition structure for the HD/HD+ is the same and is as follows:
Code:
P# Name Size Type
1 xloader 128K Fastboot Image
2 bootloader 256K Fastboot Image
3 recovery 15MB Fastboot Image
4 boot 16MB Fastboot Image
5 rom 48MB vfat
6 bootdata 48MB vfat
7 factory 448MB ext4
8 system 672MB ext4
9 cache 464MB ext4
10 data varies ext4
There is a simple process to make image backups of your internal partitions. Most people will never have to use the backups, but there is one critical partition that holds vital device specific information that was created at manufacture that is probably wise for you to back up. The process requires that you have either Terminal Emulator installed or ADB set up. And it can be done either in rooted stock or CM10/CM10.1. In Terminal Emulator or ADB Shell in superuser mode, type the following command:
dd if=/dev/block/mmcblk0p7 of=/mnt/sdcard/factory.img
This will make an image of your partition 7 that has that vital information. It also has a copy of the factory.zip file used to reset your device should you need to. If you want to back up the rest of your partitions, just change the p# and file name in the above commands to match the listing above. Partition 10 is quite large so should not be backed up using this method.
To restore a partition, just reverse the information following the if= and of= statements in the command. The information stored in partitions 1, 2, 3, 4, and 8 is specific to the ROM version you were running when you made the backup, so restoring them to another version is probably not a good idea (and if you do, restore all 5 of them together). Only do it if it is a last resort. And of course you should not restore HD partitions to the HD+ and vice versa.
Enable Unknown Sources and Blocking Auto OTA made easy (updated 12/3)
Instead of making a new thread, I have decide to make the tips that already available, but hard to use and make it simple.
So, what is it? This little thing will set Enable install from Unknown Sources and change the auto update to manual update for Nook HD ROM. I keep hearing how people are saying they have hard time making these changes so, I make it pretty dead simple. It's as simple as I can make. If you are looking at the timeline, root first, then this, and then gapps after. I now make them all so simple that it take me like 15mins to do all those 3 things from scratch. Originally I grab the sqlite3 from one of the app, which I guess I shouldn't have. Now I replace it w/ the one from CM9, which I guess is okay. And smaller size too.
If you were using verygreen version of root, try running this first.
Code:
adb shell su -c "/data/su/busybox chown shell.shell /data/su"
Pre-Requisite:
ADB and root.
NEW Instruction:
download the settings_new.zip in the attachment and save it somewhere.
unzip it.
run install.bat (for windows)
OLD Instructions:
download the settings_old.zip in the attachment and save it somewhere.
unzip it.
run install.bat (it basically just upload settings.sh and sqlite3 and change their permission, if you are on linux just do that instead)
adb shell
su
/data/su/settings.sh
*** OLD TEXT ***
While it's true that we should put heavy emphasis on not touching /system and that is not just manual works, but also any app with root access. You could be installing something like busybox via goole play store and screw everything up. That said, we are not touching /system at the moment because we lack the knowledge of that the nook is doing during boot process. I have been able to get asomething like AdAway to work which actually creating a sym link from /system/etc/hosts to /data/data/hosts file. I been doing this under the assumption that mounting and sym link are ok in the /system. But I would be worried too if there is a lot of those.
Click to expand...
Click to collapse
Lost and Confused
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
cybersonic_ca said:
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
Click to expand...
Click to collapse
If you read my description above, it says to update the driver for BNTV600.
No longer able to access internal & external memory on the Nook
leapinlar said:
If you read my description above, it says to update the driver for BNTV600.
Click to expand...
Click to collapse
This is what I did:
1. Plugged my Nook HD+ to my computer (ADB enabled)
2. Device Manager / BNTV600 / Update Driver Software / Browse my computer for driver software / Usb_driver_r04-windows folder / OK
3. Clicked on ‘Let me pick from a list of device drivers on my computer’
4. MTP USB Device appeared so I clicked on ‘Have Disk’
5. Browsed ‘android_winsub’ and clicked Open and OK
6. Android Composite ADB Interface appeared so I clicked ‘Next’
7. Message, ‘Windows can’t verify the publisher of this driver software’
8. Install this driver software anyway
9. Rebooted my computer
10. When the Nook is connected to the computer (ADB not enabled)
a. The Nook shows up as a G: drive and ‘MyNOOK Setup’ is the only file in it
b. Clicking on the ‘MyNOOK Setup’ brings me to a message:
• Welcome to MyNOOK Setup.
• MyNOOK Setup is a one-time installation that will allow you to tranfer your personal files to your NOOK.
• Transferable files include, but are not limited to: photos, music, videos, EPUB, PDF and Microsoft Office files.
• Note: Copyright protected files are not transferable
• To install, go to .... can't post link since im a noob
• For more information, visit ..... can't post link since im a noob
c. MyNOOKSetup.dmg appears when I click on the first link
11. When the Nook is connected to the computer (ADB enabled)
a. AutoPlay ‘BNTV600’ constantly appears.
12. I cannot access the internal or external memory on the Nook for both #10 & #11,
13. Running ‘makeroot.bat’ in the cmd for both #10 & #11 does not work either.
14. Device Manager / NOOK (BNTV600 no longer exist)
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Cool but....
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Possible driver conflict with Samsung Galaxy Tab 7 Plus
leapinlar said:
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Dopey32 said:
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Click to expand...
Click to collapse
I don't know what to tell you. I just tried again with windows XP and it downloaded fine. Just keep trying. And watch where windows puts it.
cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
•NOOK (G Drive appears in My Computer
When ADB is enabled
•NO NOOK (G Drive in My Computer
•BNTV600 AutoPlay windows constantly pops up
Click to expand...
Click to collapse
I experienced a lot of the same symptoms.
The Nook G: is for Mac users that do not have MTP. It is so they can get the drivers they need. Notice the .dmsg (sp ?) is for them. That will only go away when you get MTP working or switch to enabled adb.
I was most concerned with getting the adb interface working, so I just ignored the MTP issues until later. In fact I temporarily disabled it so it would not keep popping up during adb.
After I got everything sideloaded and rooted, I tackled the MTP issue. With adb unchecked, I went to USB devices and uninstalled the USB mass storage device (which was the Nook G). Then it recognized MTP.
Sent from my Nook HD+ using Tapatalk
I think it's safe to say that what we(me and other who got all the stuff out seperately) did so far aren't anything very dangerous. We havn't touch any other partition or boot loader. Unless you mess them up yourself since now you have root, then the worst it could happen is a full factory reset or you can force yourself to factory reset it.
okay got a little farther
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
All these tips also help with the HD. Thanks so much!
Sent from my Nook HD using xda premium
Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
Then you have either not installed the Android SDK (Software Development Kit) on your PC (which includes adb) per the B&N instructions or your path variable is not set to include where you installed it.
Sent from my Nook HD+ using Tapatalk
Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
if you can't follow or understand the instructions about adding the path to adb in the environment path you can always just cd "/to the directory adb is installed/" and run adb directly from there. easy way is to just drag the folder into the command prompt window. it'll save a bit of typing - only works if you're not running cmd as admin.
You said you modded the drivers from B&N? What did you change? Just curious...
So, instead of making another thread, since this is a tips thread, I'll just post it here.
Just in case you are not familiar with a factory reset on the Nook HD+, there are two kind of factory resets. The one that you perform yourself, which is actually not a full factory reset and the one that Nook get pissed and do the full one.
A factory reset that you perform yourself, whether from the GUI or button combination will basically clean the partition /data while a full blown one will basically restore other partition such as /system.
Why do I bring this up, because as we know, we are not perfect. I make mistake and so do other. Sometime instead of trying to re-trace the step and fix our mistake, it's easier to just reset everything. Well, since we can't just do a full blown factory reset our self, at least not very easy, we can at least force the Nook to do it for us.
So, if you felt like I did something wrong, and I don't know which step to take next, I make a little tool for you to start over. You can see the attachment, reset.zip in there, there are 3 files. You only have to run reset.bat if you need a linux version, maybe you can beg the OP to do it for you. If you exam the package, you can see that this is very similar to the original root method which force itself to factory reset, so this is basically a modified version of that. Obviously you still required ADB. Well, on the other hand, if you never get ADB working in the first place, you probably can't mess up that bad that you need this tool in the first place.
Let me make it clear, this tool WILL RESET EVERYTHING. It also REBOOT MANY TIMES. And expect the whole process to take about 10 minutes.
dbh369 said:
You said you modded the drivers from B&N? What did you change? Just curious...
Click to expand...
Click to collapse
I actually modified a generic driver by putting the Nook HD+ device id in it. I was not able to download the B&N driver so I don't know if it needed modifying or not.
Sent from my Nook HD+ using Tapatalk
cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Click to expand...
Click to collapse
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
sayw0rd said:
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
Click to expand...
Click to collapse
Go to command prompt and type 'adb devices' and see if you have any. And the looking for bntv600 was for getting the composite to show. You have that.
Sent from my Nook HD+ using Tapatalk
So I was able to do a full adb backup when I was on 4.1.2 before I updated to 4.2.2.. I wanted to do another full adb backup again on 4.2.2 before putting a recovery or custom rom on my device so it would be easy to restore back to my completely stock experience (with root) if I choose. But for some reason after letting it run all the way through (I let it run overnight since it takes so long) the backup is nowhere to be found which leads me to believe it failed somewhere along the way, but no errors are reported. Has anybody had this issue or have any advice on what may be going on? I've tried doing:
Adb backup -all
Adb backup -all C:\Users\Wyth\Desktop
Adb backup -all G:\ (external HDD)
Adb backup -all G:\xtzbackup (in case adb backup had some sort of bug saving to the root of the drive)
If anybody has any help or alternative solutions to creating a full system backup I'd appreciate it! Thanks in advance!
If you are going to supply a path and file name, don't forget the -f switch
dph3055 said:
If you are going to supply a path and file name, don't forget the -f switch
Click to expand...
Click to collapse
Thanks, that was absolutely the issue. I guess I did that the first time around but forgot the second. I ended up making the backup and then unlocking the bootloader. Unfortunately I forgot that it would completely wipe the internal storage rather than just a factory reset, so I lost my titanium backups. Tried to do the adb restore, and every time after the first app it would just reboot the device. After trying it many times I ended up using the adb extractor tool to create a tar from the backup. Apparently however the backup was no good because when extracting the tar after getting to a certain part every time it came up with unexpected end of archive. But I at least got most of the titanium backup folder out. Tried copying that to internal storage and it was permission denied. Copied it to external sd, and then on the tablet transferred it to internal storage. Then every time I restored any of the data, when I rebooted the tablet it would go into bootloops. After many ftf flashes and time wasted copying things back and forth all over the place I finally am basically just resigning to starting over. Boot into CWM and made a backup, and find that it makes the clockwork mod backup folder in data/media rather than the proper place in data/media/0 or even data/media/legacy. The option to backup to external sdcard also doesn't work, as it refuses to mount sdcard or external-sdcard. Needless to say the last 24 hours or so has been massive headaches. Is there a newer version of CWM for the tablet than 6.0.3.2? It seems pretty buggy and hard to believe that it is what everyone has been using as the button combination to reboot to recovery doesn't even work.
Btw, I'm trying to do this on the stock sony 4.2.2 firmware for sgp312.
Using kernel and recovery from here:
http://forum.xda-developers.com/showthread.php?t=2433466
with ftf from here:
http://forum.xda-developers.com/showthread.php?t=2424550
is there a reasonably easy way to replace the factory.zip? (partition 3?)
I have what must be an older color, that if I do the 8 failed boots, it reverts all the way back to software 1.0.0
I find that it wont auto update to 1.4.3.
I have to first apply a 1.2 update, before it will take the stock B&N 1.4.3
(or manually thru cwm apply a 1.3 for example)
its not a deal breaker, but I'd prefer a solution that isnt boot into linux/dd the partition
this is a unit I muck around with, testing various roms, and getting it back to stock just involves a few extra steps.
thanks!
The easiest way to get it back to stock is just to flash it directly back with CWM. Go to my NC Tips thread linked in my signature and follow item A15. I have a CWM flashable 1.4.3 there.
However if you want to change the factory zip in partition 3, I can walk you through how to do that. It basically means mounting p3 in a rooted operating system like CM and copying the new zip there.
Sent from my BN NookHD+ using XDA Premium HD app
"However if you want to change the factory zip in partition 3, I can walk you through how to do that. It basically means mounting p3 in a rooted operating system like CM and copying the new zip there."
I'd like to try that if you are willing. Thanks!
I think im pretty experienced.
I have done cm7 / cm10 / on colors/NT many times, have run all the possible scripts you might think of more than once to fix various issues on many colors
one thing Ive noticed on this one after resetting data to the new partition scheme,
that just sort of nags at me, (besides not having a restore to the way I like it from the 8 failed boots)
after Im at 1.4.3 and think Im done, if I do a factory reset from within the stock rom
going to the "factory" screen (and before skipping oobe) seems to flipflop between thinking its got sw 1.0.0 and 1.4.3 , however, the running version in both cases is 1.4.3.
thanks again
----- edit -----
addl info:
I have a CM7 loaded / with the NookColorUMS am able to mount the partition, but have no idea how to maneuver to it, or the format of the zip I'd be dropping in it. (I assume its just a factory rom renamed) On the tablet, cant seem to find the partition after its mounted in either file manager program I've tried, and I've forgotten any real linux/Unix skills I used to have... and it would appear its not usable on the Windows side.
The zip to use is the one I referenced above in item A15. Just rename it factory.zip.
And since you have the UMS utility, mount p3 in the first section. Then plug in your USB cable to Windows and it should show up as a drive. Look at it with Windows Explorer. You can tell if you are there by seeing the factory.zip. Backup that one to your PC in case something goes wrong. Then copy the new factory.zip on the drive replacing the old one. Be careful with the other files there, especially the rombackup.zip. That is critical and needs to stay there. (In fact back that up to your PC too).
That's it, you're done. Next 8 failed boot you should be on 1.4.3.
Edit: You know instead of doing the 8 failed boot to get back to stock, just do a nandroid backup with CWM while you have stock on it and then you can use that backup for restoring to stock. Much easier.
Sent from my BN NookHD+ using XDA Premium HD app
" And since you have the ums utility, mount p3 in the first section. Then plug in your USB cable to Windows and it should show up as a drive. Look at it with Windows Explorer."
Yeah, this is where the plan goes south,
anything mounted in UMS doesn't seem to be translated properly for Windows. I get a "you must format the disk" but no additional usable mapped drives.
the internal partitions in the version of cm7 UMS I have are all down below, in the 2nd section
do I have to mount the "big" extended partition first? then in the second tab of UMS the factory p3? (ill try it in a few)
No, don't do that. I'll give you alternate instructions.
Go to Terminal Emulator in CM7 and set for superuser (type su enter). Then type these commands.
mkdir /factory
mount /dev/block/mmcblk0p3 /factory
The go to /factory with your root file manager.
Proceed as earlier instructed.
Did you see my edit above?
Edit: and the reason your drives are not showing properly in Windows is you must activate UMS in CM7. Pull up your notification area and tell it to allow access after you plug in the cable
Sent from my BN NookHD+ using XDA Premium HD app
the su/terminal thing is just what I need I think. will report back in 5
re:
"Edit: You know instead of doing the 8 failed boot to get back to stock, just do a nandroid backup with CWM while you have stock on it and then you can use that backup for restoring to stock. Much easier."
Oh, I have no trouble getting em back to stock, and "close" to perfect, but I could sell this unit and 6 months from now I wanna be able to tell the user just do this ( 8 factory failed) , and its good to go, and Im not supporting a rebuild to stock 1.0, then 1.2, or a cwm flash.
Edit2:
re: " Edit: and the reason your drives are not showing properly in Windows is you must activate UMS in CM7. Pull up your notification area and tell it to allow access after you plug in the cable "
Yea, Im doing that. Does one have to disable debugging or something too?
Its not a big deal at all, just didn't have it committed to memory and hasn't been necessary to this point to access the protected partitions.
mikeataol said:
the su/terminal thing is just what I need I think. will report back in 5
re:
"Edit: You know instead of doing the 8 failed boot to get back to stock, just do a nandroid backup with CWM while you have stock on it and then you can use that backup for restoring to stock. Much easier."
Oh, I have no trouble getting em back to stock, and "close" to perfect, but I could sell this unit and 6 months from now I wanna be able to tell the user just do this ( 8 factory failed) , and its good to go, and Im not supporting a rebuild to stock 1.0, then 1.2, or a cwm flash.
Click to expand...
Click to collapse
if you sell or give away your unit, be sure to erase and deregister with stock so it is removed as your device on the B&N servers. Otherwise the new user will not be able to register it. And you know stock recovery must be installed before the 8 failed boot works, right?
Also see my edit above about how to fix ums..... Yes you must disable debugging.
Sent from my BN NookHD+ using XDA Premium HD app
"Go to Terminal Emulator in CM7 and set for superuser (type su enter). Then type these commands.
mkdir /factory
mount /dev/block/mmcblk0p3 /factory"
Hi, I did the whole process twice , just to be sure before coming back... 2nd time was with a newly downloaded copy of the signed A15 zip
Are you sure the factory recovery wants the signed zip file and not the stock?
after 8 failed boots it does a data reset, then tried the factory image reinstall but the factory image reinstall part fails about 1/3rd of the way through
---
had to wing it on the mounting / copy a little as just running terminal put me in a read only file system
but im 100% positive I Installed the signed1.4.3. into factory (backed up the 1.0.0 factory.zip first)
just noting , I DID use the repartition scripts on this prior, setting it to the "new" 5gb data / 1gb media
but it seems to me that the stock recovery isnt liking the signed zip file
mikeataol said:
"Go to Terminal Emulator in CM7 and set for superuser (type su enter). Then type these commands.
mkdir /factory
mount /dev/block/mmcblk0p3 /factory"
Hi, I did the whole process twice , just to be sure before coming back... 2nd time was with a newly downloaded copy of the signed A15 zip
Are you sure the factory recovery wants the signed zip file and not the stock?
after 8 failed boots it does a data reset, then tried the factory image reinstall but the factory image reinstall part fails about 1/3rd of the way through
---
had to wing it on the mounting / copy a little as just running terminal put me in a read only file system
but im 100% positive I Installed the signed1.4.3. into factory (backed up the 1.0.0 factory.zip first)
just noting , I DID use the repartition scripts on this prior, setting it to the "new" 5gb data / 1gb media
but it seems to me that the stock recovery isnt liking the signed zip file
Click to expand...
Click to collapse
That is possible since I modified it. Go get a clean one from B&N. Go their support page and look for update. There will be a link to a big file that ends in .npk. Download that and rename to factory.zip.
Sent from my BN NookHD+ using XDA Premium HD app
It seems the 1.4.3 update zip from B&N isn't suitable as a factory.zip
neither the signed or unsigned works
I've grabbed 2 factory zips from other units
1.2.0 and 1.3.0 and copied them into factory, and they both work as expected on the 8 failed boots
I didn't get the complete result that I wanted , but good enough.
Thanks again for your help leapinlar, It's appreciated.
Could you put a custom rom as a factory.zip? Just a thought. It'd be cool to rollback to a stable rom like cm7 if something in a cm10/11 nightly goes wrong.
Schedule Post:
#1 - What Is ClockworkMod Recovery And How To Use It On Android
#2 - Nandroid Backup & Restore
#3 - Onandroid Backup
What Is ClockworkMod Recovery And How To Use It On Android
ClockworkMod – also known as Clockwork or CWM – is a custom recovery for Android phones and tablets that allows you to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren’t possible with the stock recovery. In what follows, we will cover all that this recovery is capable of doing, and how to do it. We do not discuss about TWRP (TeamWin Recovery Project) in this thread.
1.All About Android Recovery
All Android devices ship with a recovery console that is basically a partition on the device’s internal memory and can be booted into. The stock recovery of almost all Android devices provides a few basic yet handy options that allow you to factory reset your device and also to recover its operating system using an official ROM in zip format, but that’s all you can do with it. That’s where a custom recovery comes handy.
A custom Android recovery basically replaces the stock recovery with one that lets you do all you can do with the stock recovery, plus a plethora of more options to give you a lot more control on your device. With a custom recovery, you can install official and unofficial ROMs as well as other updates including apps, themes, kernels etc. using zip files, wipe not just user data but pretty much every partition on your device, mount the storage card for USB mass storage access without leaving recovery, partition your SD card, wipe Dalvik cache and battery stats, fix permissions, perform, manage and restore backups and so on.
2.Introduction to ClockworkMod
ClockworkMod recovery is one of the most widely used custom Android recoveries that is available for most mainstream Android devices. It is the needed recovery for AOKP, AOSP, CM. ClockworkMod recovery has been developed by Koushik Dutta (also known as Koush) – the same guy who brought us the Android ROM Manager.
3.Booting into ClockworkMod
On most Android devices including ones by Samsung, you can enter recovery by powering your device off and then powering it back on while keeping either the Volume Up+Home+Power buttons pressed in the same time. This will enter the bootloader from where you can select the ‘RECOVERY’ option by navigating to it with the Volume key and entering it with the ‘Power’ key.
Tour
1. reboot system now
Reboot/restart your phone.
2. apply update from sdcard
This can be used for installation of any official or unofficial update, ROM, kernel, theme etc. That is in a zip format installable from recovery, as long as the file is named update.zip and it has been placed on the root of your SD card (i.e. not in any sub-folder). Selecting this option (and most of the options featured below) will bring up a rather annoying confirmation prompt but this has saved us on multiple occasions from a lot of trouble we would have been into due to accidental key presses. This is what we are talking about:
3. wipe data/factory reset
This option wipes all user data on the device as well as cache. Doing this will leave your phone in the state it was in when you bought it or when any custom ROM was first installed. It will also wipe any sd-ext partition that you might have setup (more on this later).
4. wipe cache partition
Wipes the cache partition of the device to clear all the data accumulated there over use. This is often used before installing a new ROM, app, kernel or any similar mod via recovery.
5. install zip from sdcard
This option brings up the following sub-menu:
a. apply /sdcard/update.zip
This one is essentially the same as the ‘apply update from sdcard’ option of the main menu.
b. choose zip from sdcard
Lets you install any zip file (with any name) from any location on your SD card. The file can be for a ROM, a kernel, an application, a theme or any mod as long as it is in recovery-flashable zip format. This is the most widely used option for installing a ROM that you have downloaded and copied to your SD card.
c. toggle signature verification
Turns the signature verification on and off. When signature verification is on, you will not be able to install any custom ROMs that haven’t been signed by the developers (most custom ROMs aren’t signed). Switching it off skips the signature verification check and proceeds with the installation.
d. toggle script asserts
Seldom-used option for a vast majority of users. It simply turns script asserts on or off. If you don’t know about these (we don’t), it’s best not to change this option.
e. +++++Go Back+++++
Takes you back to the main recovery menu, obviously!
6. backup and restore
Undoubtedly one of the most important features provided by a custom recovery, the backup and restore feature – also known as Nandroid backup – allows you to take a snapshot of your phone’s entire internal memory including all partitions, and save it on the SD card.
a. Backup
Takes a Nandroid backup, as explained above.
b. Restore
Lets you restore a previously taken backup. Entering this option presents you with a list of existing backups from the SD card that you can choose from for restoration.
c. Advanced Restore
This option is similar to the Restore option but once a backup has been selected to be restored, this option allows you to choose what parts of it to restore. You can choose to restore the boot, system, data, cache and sd-ext partitions.
7. mounts and storage
Allows you to perform maintenance tasks on all the internal and external partitions of your android device
a. mount/unmount /system, /data, /cache, /sdcard or /sd-ext
These options let you toggle between mounting or unmounting these respective partitions. Most users don’t need to change these options.
b. format boot, system, data, cache, sdcard or sd-ext
These let you directly format any of these partitions. Take extreme care with this option as formatting any of these partitions will result in losing all data on them, especially the boot and system partitions. Formatting the system partition will remove your ROM and leave your phone without an operating system while wiping the boot partition may brick your phone unless you restore or flash another one before rebooting your device.
c. mount USB storage
Lets you enable USB mass storage mode for your SD card right from recovery so that you can connect it to your computer via USB and transfer any files to/from it without having to leave recovery.
8. advanced
This section contains a few options most users will not require, though these can come handy quite often, especially wiping Dalvik cache, which is required before most ROM installations.
1. Reboot Recovery
Lets you directly and very conveniently reboot from recovery right back into recovery. This is useful option for certain back-to-back installations that require the device to at least boot once between them.
2. Wipe Dalvik Cache
Allows you to wipe the cache for the Dalvik virtual machine (the custom-built Java virtual machine for Android).This is required before most ROM installations and at other occasions too, for fixing some problems.
3. Wipe Battery Stats
Wipes the saved battery usage statistics and effectively recalibrates the battery. Useful in various scenarios when Android isn’t showing correct battery levels.
4. Report Error
In case of errors, this feature can be used to save a log of recent ClockworkMod recovery operations on the SD card that you can later report from Android using ROM Manager.
5. Key Test
Lets you press any of the hardware keys to see if they are properly functioning, and to see their key codes.
6. Partition SD Card
This option gives you a no-frills way to partition your SD card properly for use with ROMs that support data2ext (a very handy hack for low internal memory devices that enables an /sd-ext partition on the SD card to be used as the internal user data storage i.e. as the /data partition). Once this option is selected, you will be given options to choose the sizes for the /sd-ext partition as well as an optional /swap partition on the SD card, and will then automatically format it for you, leaving the remaining space for normal SD card usage. This option will wipe all data from your SD card so use it with caution!
7. Fix Permissions
Fixes the file permissions for the internal memory partitions back to default. This is very useful as a fix for several errors and Force-Closes that start appearing after you or an application you installed and provided root access end up messing up the permissions of important files.
4.Using ClockworkMod for ROM, kernel, apps, theme or mod installation
While in the complete feature tour we have already shown you how to install a ROM, kernel, app, theme or any similar mod from a recovery-flashable zip file using the recovery options, those of you who jumped straight to this section expecting to get just this information quickly are at the right place!
This guide is primary focused on a full feature tour of CWM but in our previously written guide on how to flash a ROM or app from a zip to an Android device file from recovery, we have already covered in detail how to use ClockworkMod for installing any ROM, kernel, app, theme or mod using a recovery-flashable zip file. While that guide is based on an older version of ClockworkMod recovery, everything in it still applies to the latest versions and should work flawlessly.
5.How To Install A ROM or App from zip file to Android device from recovery
Please note that the terms ‘installing’ and ‘flashing’ can be used interchangeably here and will mean the same thing.
Rooting your device renders its warranty void.
ALWAYS take backups before rooting or flashing a custom ROM or app to your phone.
Flashing a defective ROM or app to your phone might brick it so choose the ROMs and software that you flash wisely and never install a ROM or application from an untrusted source.
AddictiveTips will not be liable if your device gets damaged or bricked during the process.
Official ROM updates from device manufacturers or carriers are released in conveniently packaged installation files that you can run on your computer while your Android device is connected to it, and they automatically take care of updating your phone’s system. Similarly, most applications are available directly in the Android Market for easy installation, or come packaged as convenient ‘.apk’ files that you can just run on your Android phone to install. The case is not the same with most custom ROMs and several custom applications, which come in .zip files rather than PC installers or .apk files.
The idea of installing a customized operating system to their smartphone can be quite intimidating for inexperienced users. Though once they get used to it, some of them end up trying out different ROMs for their devices several times a day. While I don’t exactly recommend that you flash every new ROM that is made available for your Android phone, we are here to help you get over the fear of flashing a ROM that enhances the capabilities of your device so that you can use it to its fullest potential.
Here is a quick look at what we will be covering in this guide. Feel free to skip to the real deal if you already meet the prerequisites.
• Before We Begin: Battery Check
• Before We Begin: Unlocking the Bootloader (Stock Android Devices Only)
• Before We Begin: Rooting
• Before We Proceed: Installing a Custom Recovery
• The Real Deal: Installing a Custom ROM to your Phone
• The Real Deal: Installing an App From a Zip File to your Phone
There are certain steps that you might not require, and we shall be mentioning them in each section.
Before We Begin: Battery Check
Before you proceed with any of the following steps, make sure your phone’s battery level is not too low. It is recommended to have it at 50% or more. Do NOT take this lightly. If your phone’s battery runs out while you are attempting to flash a custom ROM, there is a significant chance of your phone getting bricked and becoming unusable PERMANENTLY.
Before We Begin:Unlocking the Bootloader (Stock Android Devices Only)
Note: This step applies only to Android devices with stock version of Android installed. At the moment, Google Nexus One and Nexus S are the only two such devices available. You may skip this step if you are using any other Android device.
Users of stock Android devices such as the Google Nexus One or Nexus S also need to unlock its bootloader before they can proceed. Once you have done this, you may proceed to the next step.
Before We Begin: Rooting
Note: You may skip this step if your device is already rooted, or if you already know how to root it.
Before you can install a custom ROM to your device, your phone needs to be rooted. Rooting is basically administrator or root level access required to perform administrative tasks on your Android device. Once you are done with the rooting process, you may proceed to the next step.
Before We Proceed: Installing A Custom Recovery
Note: You may skip this step if you already have a custom recovery installed on your device.
Rooting grants you the necessary access level to execute administrative tasks on your Android device but it is the recovery that provides the tools necessary to actually perform those tasks. While every Android device ships with a recovery, the stock recovery is quite limited in what it lets you do, and you need a custom recovery image to perform advanced operations on your device. Once you have a custom recovery installed on your phone, you will be ready to proceed to the next step.
The Real Deal: Installing a Custom ROM to your Phone
Now that you have a custom recovery installed on your phone, you can perform all sorts of wonderful advanced operations on your device and this includes the ability to flash a ROM or application from a zip file. The procedure is pretty standard for most ROMs, though there are certain ROMs which require additional steps for their installation. Since those steps differ from ROM to ROM, pay attention to instructions and this includes only the standard instructions here.
• Manually
1. Download the ROM from the link given in the article featuring that ROM. It should be a zip file.
2. Connect your phone to your computer via USB and mount its storage card.
3. Copy the downloaded ROM to the root of the storage card.
4. Power your phone off and reboot it into recovery. This will involve using a combination of your device’s hardware keys. Once in recovery, you can navigate its menu using the volume up and volume down hardware keys or your phone’s trackball / optical track pad if it comes equipped with one.
5. Use the ‘backup and restore’ feature of recovery to backup your existing ROM installation, software and data. This step is known as performing a nandroid backup. ALWAYS perform a backup before flashing a custom ROM, UNLESS you can afford to lose everything that’s on your phone at the moment.
Note: ALWAYS choose to perform the following steps 6, 7 and 8 UNLESS the ROM you are attempting to flash is an updated version of the same ROM that you are currently using, and is compatible with the current installation’s data. It is usually mentioned with the update whether you can install it over a previous version without wiping its data or not.
6. Get back to the main recovery menu and use the option ‘wipe data/factory reset’. You will be prompted to confirm this action. Select “Yes – Delete all user data”.
7. From the main recovery menu, select ‘wipe cache partition’. You will be prompted to confirm this action. Select ‘Yes – Wipe Cache’.
8. From the main recovery menu, enter the ‘advanced’ menu. From this menu, select ‘Wipe Dalvik Cache’. You will be prompted to confirm this action. Select ‘Yes – Format/System’.
9. From the main recovery menu, enter the ‘Mounts and Storage’ menu. From this menu, select ‘Format/System’. You will be prompted to confirm this action. Select ‘Yes – Wipe Dalvik Cache’.
10. Go back to the main recovery menu by pressing the back button and select the ‘Install zip from SD card’ option.
11. Select ‘choose zip from sdcard’ to get a list of the files and folders on your SD card. Scroll to the ROM’s file that you copied there in step 3, and select it. You will be prompted to confirm this action. Select ‘Yes – Install file_name.zip’ where file_name.zip is the name of the zip file that you are trying to install.
12. Wait patiently while the ROM is flashed to your phone via recovery.
13. Once the installation is complete, head back to the main recovery menu if you aren’t there, and select ‘reboot system now’. Your phone will now boot into the newly installed ROM.
The Real Deal: Installing an App From a Zip File to your Phone
While most apps for Android devices are available at the app store for direct download and installation or as .apk files for direct installation, there are certain apps which are only available as zip files installable from recovery. Their installation procedure is the same as installing a custom ROM that we just featured above. However, there are a few minute differences.
• When installing an app from a zip file, you do NOT need to perform the ‘wipe data/factory reset’ or ‘wipe/system’ step so NEVER do that unless you know what you are doing, have a complete backup and want to start using your ROM as a fresh installation with the new app added.
• You might or might not need to wipe the cache and the dalvik cache for installing apps from zip file. This varies from app to app and the developers of such apps as well as many reviewers including us mention when featuring an app whether it requires a cache and dalvik cache wipe or not. However, it never hurts to wipe these caches anyway, and it does not effect the data on your device or its storage card.
There you go, this concludes the guide on how to flash a ROM or app from a zip file to your Android device using a custom recovery. To try out the skills that you just learned, search our site for custom ROMs for your phone and start flashing, always remembering to take backups first!
Important note: This guide is retrieved from the VeNum Complete Guide with only few additions and corrections by me, so All thanks should go to him!
PS: If you see any error, please contact me to edit the OP.
Nandroid Backup - CWM
What is a Nandroid Backup?
It is a full backup of the partitions on your device’s NAND flash (NAND actually stands for NOT AND, which in simple terms means an electronic gate). Basically a backup of your phones hard drive if you will...
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
The SD Card data is not backed up in the process. Although, the Nandroid Backup itself is created on your SD card. Make sure you have enough space on your SD card to make a COMPLETE copy of your phone.
It’s highly recommended that once you have done a backup, you manually copy it to your computer in case your sd card is wiped or corrupted.
Pre-requisites:
1. Rooted Device:
2. Custom Recovery (CWM or TWRP)
While the OS is running you cannot do a backup. The bootloader in the recovery enables you to take a backup of the OS while it’s not running.
How to Make a Nandroid Backup via CWM:
Backup via CWM:
1.Boot into Recovery pressing in the same time Volume Up + Home + Power buttons for our Galaxy S4 mini LTE/3G phones
2. Select ‘Backup and Restore’ from the recovery.
Once you are in recovery, scroll down to the option ‘Backup and Recovery’ with volume Up/Down and select it (Power button for select).
3. Start the backup.
Once you are on the Nandroid screen, select ‘Backup’ to start the backup process. You have the option to ‘Restore’ backup on the same screen.
The backup process may take a while. Take a break for a coffee.
4. Transfer the backup to your computer (recommended).
Once you reboot, you can see the backup in the ‘clockworkmod/backup/…’ (or similar file) directory on your SD card.
Move, copy, or paste this folder on your PC safely.
Restore from a Nandroid Backup via CWM:
1. Boot your device into CWM and navigate to the Nandroid screen.
2. Choose ‘Restore’ and begin the process.
If you select ‘Advanced Restore’ option, you may select which part of the backup to restore – i. e. the boot,system, data or cache. Or choose the whole backup.
3. Reboot your device. Your system is now restored and is exactly the same as the time when the backup was taken.
Video guide (ignore phones from videos ) :
CWM guide
TWRP guide
[app] Online Nandroid Backup
Online Nandroid Backup - FULLY SUPPORTED with our Samsung S4 mini GT I9195/I9190/I9192
Online Nandroid - Supported Devices
Nandroid backups are usually performed in recovery mode. This means you would have to turn off your phone and reboot in recovery mode, which wastes a whole lot of time rebooting and a lot more time offline. With this tool you can do nandroid backups without switching off your device.
Requirements:
1. Rooted android phone
2. A terminal emulator installed on phone
3. Latest version of Busybox
4. A working CWM or TWRP
5. Patience
Features:
* Creates backups in the CMW 5 and 6 style or TWRP!
* Full support of the onandroid script.
* Create custom names for your backups.
* Choose what partitions get backed up.
Important: This tool requires a rooted phone with busybox to work!
Download from market: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup
Or from original thread: http://forum.xda-developers.com/showthread.php?t=1620255
Reserved, for future.
I will complete with more info's and screenshots in few days.
Please, keep thread clean and don't post "Thanks".
Regards
I assume this guide was written for nexus devices because the nexus one and nexus s are mentionend and you wrote that the bootloader has to be unlocked (Which has to be done on most devices. Only Samsung(?) has unlocked bootloaders. You could add that unlocking wipes user data.)
The second thing is: Your phone doesnt have to be rooted to install a custom recovey. Either you flash a recovery with Odin (add this aswell) and wipe everything to install a custom rom or you the superuser app to root your stock firmware.
But excuse me if you weren't finished with the post
Did you read carrefully OP and the note from the end?
Important note: This guide is retrieved from the VeNum Complete Guide with only few additions and corrections by me, so All thanks should go to him!
Click to expand...
Click to collapse
Excellent guide, thank you!
R_a_z_v_a_n said:
Online Nandroid Backup - FULLY SUPPORTED with our Samsung S Advance GT I9070 (Janice)
Click to expand...
Click to collapse
Are you saying that the onandroid Partition Script for I9070 works perfectly fine with S4 Mini i9195?
impactor said:
Are you saying that the onandroid Partition Script for I9070 works perfectly fine with S4 Mini i9195?
Click to expand...
Click to collapse
Yep its fully supported, that post its copy/paste from my previous phone/thread. :highfive:
Edited my post, thanks for report.
Check here compatibilities:
Online Nandroid - Supported Devices
Nice really great information Thanks again:good:
DISCLAIMER
The process of flashing a custom recovery/kernel/firmware may and will trigger your device's Knox Counter. Neither XDA nor I can be held responsible for your actions. Proceed with caution. During this process you will lose all your settings and apps. As long as you follow the instructions, your device's storage, internal and external, won't be touched
Still not compatible with x64 systems! Not compatible with Samsung 5.1.x (sdk22) ROMs!
Hello, Ladies and Gentleman
Many people seem to have a hard time to understand how all of this here on XDA works. I constantly get PM's from users, asking how to do the most basic stuff like flashing a .zip or stock firmware via Odin. Usually, I don't even read them and just hit delete. I know it's not ok to deny people help, so I decided to show you how you can get Xposed working on your TW based stock or custom ROM since it's the most frequently asked question I get.
It's nothing you couldn't do if you'd just....
We're going to use @arter97's customized Xposed Framework as the one made by @darkera13 needs the user to manually modify and replace files which may be too complicated for some.
Preparation
-READ EVERYTHING OVER AND OVER AGAIN.
-A custom recovery System like TWRP or CWM (PhilZ or Stock)
-A deodexed ROM. It's the only way to go. YOU NEED A DEODEXED ROM. If your ROM is not deodexed and you flash the framework, you'll end up in a bootloop. To deodex your existing ROM carefully follow Post #2
Here are a few made by XDA Senior Member @_alexndr
Stock deodexed for SM-N9005 Galaxy Note 3 International Qualcomm.
Stock deodexed for SM-G900F Galaxy S5 International Qualcomm
-And the framework itself from here
[UNOFFICIAL] Xposed for Samsung Lollipop by arter97
-Flash a custom recovery system of your choice. This is listed under preperation on purpose since this guide is about getting Xposed on your TW Lollipop device. A guide on how to get a custom recovery system is most certainly available in your device's forum.
-Store the ROM and the Framework in an easy to find folder, which we're gonna call "folder x". It doesn't matter where you store it (ext. SD or int. SD)
The Fun Part
-Boot into your custom recovery and make a full wipe:
TWRP users: "Wipe>Advanced Wipe> Tick System, Data, Cache, Dalvik Cache> Slide to format.CWM users: "Mounts and Storage> hit Format /System; hit Format /Data; hit Format /Cache.
-Still in recovery system, install, or flash the files we put in folder x;
TWRP users: "Install> Navigate to folder x and choose the ROM file first> Add Zip> now choose the Xposed Framework from folder x> Slide to flash.CWM users: "Install Zip> Choose zip from /sdcard if folder x is on internalt storage or /storage/sdcard1 if folder x is on ext. storage (SD-Card)>choose the ROM file first> -Yes - install ROMXY.zip.Do the same with the Xposed Framework zip file.
-Still in recovery system, reboot device and wait for it to boot. It can take up to 20 minutes. Enjoy Xposed on your Samsung TouchWiz Lollipop ROM.
-Stuck in a bootloop? Try this and repeat the process.
XDA Senior Member @Honzze kindly pointed out to keep following in mind; You have to start JoelDroid Lollipop Batch Deodexer with Admin permissions. Otherwise this error might return "path variable" of Java "is not set".
Deodexing your existing ROM without having to flash an entire ROM
As the title says, with this awesome guide by XDA Senior Member @townsenk you don't have to reflash an entire new ROM to your device. Instead, youll just deodex those parts of your System which need to be modified in order to get Xposed working. You don't necessarily have to perform a full wipe if you do it this way. But if you encounter fc's or end up in a bootloop, you know what to do
Guide for this guide:
Regarding point 1: "...launch a DOS shell..." just means, you need to open the so called "CMD" programm in Windows. To "launch a DOS shell" or CMD from within a folder, you simply have to hold down the shift key and right click in that folder. The context menu will show an entry "open command window here". And that's it! (Windows XP users may have to search the internet for another solution)
For Galaxy S5 and Note 3 users: If ADB returns "device offline" or an empty line after "List of devices attached" make sure your using a USB 2.0 data cable on a USB 2.0 port
townsenk said:
How to DeOdex YOUR (...) Rom.
I would like to note that I appreciate all the work that developers have put forth in creating and maintaining modified Roms. there are some awesome feature rich implementations available. My intentions are not to be critical of any specific Rom or mod. Without the developers we would have nothing.
(...)
This method is very common knowledge I thought I'd just explain it in an easy to understand way.
Here is what you need.
A stock (...) ROOTED configurated phone. Debloat as needed. Set the phone up exactly how you like it with apps and such.
Make sure it's stable. (If you have issues before DeOdexing they will be there afterward!)
Here's the files you may need to make this happen
LBD2.4.zip
7-Zip
Installer template (at end of post)
1> Make sure ADB is working on your computer. USB debugging turned on. Create a folder to store your soon to be download system files and launch a DOS shell from that working folder. Working folder name should NOT contain spaces. With the phone hooked up you should be able to type adb shell and get a prompt.
2> Type these commands
adb pull /system/app app/
adb pull /system/priv-app/ priv-app/
adb pull /system/framework framework/
This will take awhile and you will be left with three folders
Create a new folder named "system" and place these three folders inside.
3> Extract and launch LBD2.4 (This is the DeOdexer and is AWESOME). Point it at your recently created "system" folder and let it do it's thing.
I'll assume this will occur without errors as I have never had any.
4> At this point you can manually apply modded apk's to the system folder but I don't really recommend it. They can be applied afterward using the seperate installer zips.
5> with 7-Zip installed open the provided Installer template. Do not Extract it. Just open it in the 7-Zip file browser using the right click context menu in windows.
Drag-Drop the contents of your system folder into the empty system folder in the 7-Zip browser It should be the three folders previously created but now they are Deodexed. Close the 7-zip file manager and select Yes if it asks you to save.
Note: The provided installer template has been modified to only wipe and replace the three system directories.
6. Copy the created installer to your sdcard and install with recovery. Wipe cache and Dalvik before rebooting.
Go have lunch. You will sit at a boot screen for about 10 minutes. Then another 20 to rebuild caches. Time varies.
7. Your system will now be Deodexed! At this point you can install your mods one at a time, I recommend this so you can test your system between installs to determine if a specific mod is creating problems.
This method has so far removed ALL of my stability issues.
Click to expand...
Click to collapse
Since I no longer own this device, I'm retiring from this thread as of now. Hope I could help you.
Don't know if someone can help me as you stated that you're retired from this thread.
I did every step you do mentioned here (for self deodexing existing rom)
I did everything successfully and deodexed my files with 2.5 deodexer, putted files in the system folder to the 7zip folder and sent to my device and flashed zip, cleaned cache and dalvik and it stuck on booting for about 15 minutes. I know, it takes alot time during rebuildup of cache, but guys, it's 15 minutes! for me, if i cleanup cache and the dalvik/art cache, it just takes 1minute on boot screen to show up the image of each apps cache, but i just sat there with lots of patient for 15 minutes or a bit more and still same, stuck in same crappy booting logo.
I did restore my system files, now i'll try to retry it and send it again. Im suspicious of the zip file being corrupted during trasmitting to Device, however install was a big success so im very sure it wasnt corrupted. I'll do 2nd test and see it again if it's happening again.
If it does, i'll most likely try to figure out other ways to deodex as there is already deodexed roms out there, so they must have done is somehow.
Thanks, hope someone can help me out with this.
P.S: My adb works fine, i got usb drivers for my device, i got usb debug on, i got lots of space on phone, i got TWRP recovery which got very high compatibility when it comes to install anything from zip via recovery where almost all roms do work stable with TWRP.
omg brilliant @nitrous² ! thanks so much! its been days i keep trying to deodex with others tool...
Sachitoge said:
Don't know if someone can help me as you stated that you're retired from this thread.
I did every step you do mentioned here (for self deodexing existing rom)
I did everything successfully and deodexed my files with 2.5 deodexer, putted files in the system folder to the 7zip folder and sent to my device and flashed zip, cleaned cache and dalvik and it stuck on booting for about 15 minutes. I know, it takes alot time during rebuildup of cache, but guys, it's 15 minutes! for me, if i cleanup cache and the dalvik/art cache, it just takes 1minute on boot screen to show up the image of each apps cache, but i just sat there with lots of patient for 15 minutes or a bit more and still same, stuck in same crappy booting logo.
I did restore my system files, now i'll try to retry it and send it again. Im suspicious of the zip file being corrupted during trasmitting to Device, however install was a big success so im very sure it wasnt corrupted. I'll do 2nd test and see it again if it's happening again.
If it does, i'll most likely try to figure out other ways to deodex as there is already deodexed roms out there, so they must have done is somehow.
Thanks, hope someone can help me out with this.
P.S: My adb works fine, i got usb drivers for my device, i got usb debug on, i got lots of space on phone, i got TWRP recovery which got very high compatibility when it comes to install anything from zip via recovery where almost all roms do work stable with TWRP.
Click to expand...
Click to collapse
Same happened to me.... Did you solved this problem?
Maurizio1953 said:
Same happened to me.... Did you solved this problem?
Click to expand...
Click to collapse
Nope, i ended up using CM12 (at that time, right now i got cm13 update).
Well i had to deodex apps to get xposed on TouchWiz, but i failed and didn't get headache because of the Xposed modules being not really well compatible on TouchWiz, so i jumped to CM, i find it more stable, and the CM13 is insane because it saves so much battery at stand by, compared to lollipop, the Android 6.0.1 Marshmallow is the biggest update in android history, that saves hell lot of battery (it can be also maybe because i don't have Xposed Framework in recent rom).
Anyway, im tired of it, and i don't need to hassle with Link2Sd because of Android Marshmallow offering to mount the SD Card, in the end, all my needs are being offered in this (for me) huge, best android update, being Marshmallow.
Try it i would say, so amazing.
Ok i would like to go to cm13 as you but i stil need the support to the gear s smartwatch so i decided to stay with touchwiz without xposed.