[JB+] CM10.2 Android 4.3 - Wifi not working - Defy Q&A, Help & Troubleshooting

Hello,
I installed the last CM10.2 release for Defy (june 2014)
everything seems to work well, excepted the wifi
In wifi configuration nothing appear, only wifi Yes/No (on/off)
i can go to Advanced options but nothing looks interesting.
any idea?
thanks

frenchline said:
Hello,
I installed the last CM10.2 release for Defy (june 2014)
everything seems to work well, excepted the wifi
In wifi configuration nothing appear, only wifi Yes/No (on/off)
i can go to Advanced options but nothing looks interesting.
any idea?
thanks
Click to expand...
Click to collapse
It works for me. I am using the same build
Sent from my MB526 using Tapatalk 2

Related

[cLK] NexusHD2-Gingerbread V3.0 (GRJ90 / Android 2.3.5) [tytung_r11] - WLAN Issue

Hi,
following details:
[26.Aug.2011][MAG/cLK] NexusHD2-Gingerbread V3.0 (GRJ90 / Android 2.3.5) [tytung_r11]
- cLK 1.4.0.1
- kernel_tytung_r12_update.zip (Credit to tytung and other devs.)
All working fine and it is great but I have a WLAN issue.
After 3-10 minutes my wlan will be disconnected and connected again. This happen without sleeping mode or something else. I have read for several hours several posts and found a lot of user with the same problems.
- Checked for serveral encryption on wlan
- Checked with dhcp / without dhcp
- Checked a lot of wifi repair tools / wifi keep conntected tools....etc.
My mobile is a HTC HD2.
Thanks for your help.
I have the same issue, the only way is comeback to NexusHD2-Gingerbread V2.8 (GRJ22 / Android 2.3.4), nothing else works for me
Hi, switched to magldr but the same problem.
Sent from my Nexus One using XDA App
oli20021978 said:
Hi, switched to magldr but the same problem.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
It seems to be an Android 2.3.5 issue. Some wireless routers are not compatible with 2.3.5.
Go back to Android 2.3.4.
Or replace fw_bcm4329.bin and fw_bcm4329_apsta.bin in this folder (/system/vendor/firmware) and try again.
My router works well, so I cannot test it.
Hi tytung, thanks for your tip but still not working right. Replaced the files but still get disconnected. ;-(
Sent from my Nexus One using XDA App
diegoff said:
I have the same issue, the only way is comeback to NexusHD2-Gingerbread V2.8 (GRJ22 / Android 2.3.4), nothing else works for me
Click to expand...
Click to collapse
Hi,
swithed to TyphooN CyanogenMod 7 Nightly -> it's my solution
Cheers...

[Solved] cm7_20111018 mobile Internet not working

Hello,
today i updated my Milestone 2 to CM7 20111018 by Endless7.
I was comming from a previous CM7, so I just did a Cache and Dalvik wipe.
everything is working fine, exept the mobile internet connection.
Is this a bug at the moment? or could it be a configuration issue?
what informations are required for troubleshooting?
DareT0Be said:
Hello,
today i updated my Milestone 2 to CM7 20111018 by Endless7.
I was comming from a previous CM7, so I just did a Cache and Dalvik wipe.
everything is working fine, exept the mobile internet connection.
Is this a bug at the moment? or could it be a configuration issue?
what informations are required for troubleshooting?
Click to expand...
Click to collapse
I had the same problem but data was disabled in settings, Wireless & networks, mobile networks. Please check.
mobile data is enabled in the setting
DareT0Be said:
Hello,
today i updated my Milestone 2 to CM7 20111018 by Endless7.
I was comming from a previous CM7, so I just did a Cache and Dalvik wipe.
everything is working fine, exept the mobile internet connection.
Is this a bug at the moment? or could it be a configuration issue?
what informations are required for troubleshooting?
Click to expand...
Click to collapse
Delete lines with comment"improve signal(3G)" in /system/build.prop.Though it works well in my region,but cause some problem with some phones. Next version I will remove them totally.
now its working
thank you for the fast support
bug fix
This version fixed keyword bug and led bugs?
ALT LOCK key ,batery led and others bugs, anyone tested this?
test and post pls
Not sure what the keyword bug is but Alt lock only works on the Moto roms, not any ASOP, but you can do Alt lock by double pressing Alt. The charging led (I assume the one next to the port) has been working for quite some time. I haven't found any other bugs with the latest build
Sent from my MotoA953 using XDA App
QWERTY ALT LOCK button <- milestone 2
"alt x2" its works very thks!!!!
Endless7 said:
Delete lines with comment"improve signal(3G)" in /system/build.prop.Though it works well in my region,but cause some problem with some phones. Next version I will remove them totally.
Click to expand...
Click to collapse
hi,
Recently i have rooted my HTC Wildfire with CM7 version: 7.1.0.1-buzz (Android 2.3.7) and found gprs (internet) not working. I can not see lines to delete (improve signal(3G)) as you've mentioned above. Looking ahead your response.
Thanks in advance.
hi,
you can set your vsel at 2 points higher. This helps me.
Ahuja2007 said:
hi,
Recently i have rooted my HTC Wildfire with CM7 version: 7.1.0.1-buzz (Android 2.3.7) and found gprs (internet) not working. I can not see lines to delete (improve signal(3G)) as you've mentioned above. Looking ahead your response.
Thanks in advance.
Click to expand...
Click to collapse
Probably due to the fact that this is a milestone 2 rom and is different from yours.
I'd suggest checking you APN settings are correct.
[Edit]: wifi works fine now but still struggling with gprs (data connection)...double checked with airtel customer care, APN Settings are perfect..Calender also doesn't work after rooting.

[Q] Wifi hotspot not working

Hello!
i am using defy Running on CM9 nightely build-120413.
wifi hotspot doesnt work. when i click turn on wifi hotspot, it says turning mobile hotspot on and nothing happens. is this problem common for all defy users on my build n will this resolve if i update to later builds? or is this a problem with my phone?
p.s however, i used to hotspot when i had Defy running on official froyo.
any help would be thanked n appreciated.
If you are using Eppy's ics then I would recommend you go with the latest nightly
Sent from my MB525 using XDA
Had the same issue on Quarks ICS. Any solucion is appreciated.
Try "WiFi Tether" you can download from play shop.
I have the same problem Running it on JB
[email protected] said:
Hello!
i am using defy Running on CM9 nightely build-120413.
wifi hotspot doesnt work. when i click turn on wifi hotspot, it says turning mobile hotspot on and nothing happens. is this problem common for all defy users on my build n will this resolve if i update to later builds? or is this a problem with my phone?
p.s however, i used to hotspot when i had Defy running on official froyo.
any help would be thanked n appreciated.
Click to expand...
Click to collapse
--------------
I have the same problem Running it on JB and just like it did on ICS it just sticks to TURNING WiFi ON (or off)
Try wifi theter for root user.

[Q] Defy+ No Call Audio after CM 10.1 update

Defy+ Phone Call audio problems :
1.Updated form CM9 by Epsylon 3 - 20121118-NIGHTLY to CM 10.1 by Quarx ( cm-10.1-20130709-NIGHTLY_v2-mb526 )
In BootMenu > Wiped data,cache,dalvik etc. Installed CM 10.1 zip > Rebooted > wiped cache/dalvik > Installed Gapps.> Rebooted.
Everything worked fine > Wifi,Edge Data,PlayStore,Email,Contact Sync etc.
No audio thru speaker or earpiece while making telephone calls, what i'm i missing ?
PS - Did downgrade back to CM9 to test & all is OK.
SandeepRoy said:
Defy+ Phone Call audio problems :
1.Updated form CM9 by Epsylon 3 - 20121118-NIGHTLY to CM 10.1 by Quarx ( cm-10.1-20130709-NIGHTLY_v2-mb526 )
In BootMenu > Wiped data,cache,dalvik etc. Installed CM 10.1 zip > Rebooted > wiped cache/dalvik > Installed Gapps.> Rebooted.
Everything worked fine > Wifi,Edge Data,PlayStore,Email,Contact Sync etc.
No audio thru speaker or earpiece while making telephone calls, what i'm i missing ?
PS - Did downgrade back to CM9 to test & all is OK.
Click to expand...
Click to collapse
Make sure you have the Bluetooth switched off, this is a known bug.
Sent from my Nexus 7 using Tapatalk
Recommendations
hotdog125 said:
Make sure you have the Bluetooth switched off, this is a known bug.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thanks ! If it does not work with Bluetooth toggle, any other ROM recommendations ?
I need something simple(ROM) with JB type UI what can you suggest ?
It's frustrating to discover that things don't work as they should
PS- So far, i have found the CM7 by CMod March 2013 build to be very stable & smooth.
I'm also OK with CM9 but find it slow
SandeepRoy said:
Thanks ! If it does not work with Bluetooth toggle, any other ROM recommendations ?
I need something simple(ROM) with JB type UI what can you suggest ?
It's frustrating to discover that things don't work as they should
PS- So far, i have found the CM7 by CMod March 2013 build to be very stable & smooth.
I'm also OK with CM9 but find it slow
Click to expand...
Click to collapse
You can use CM10. All ROMs above 4.1 have that bug
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
You can use CM10. All ROMs above 4.1 have that bug
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I reinstalled CM10.1 & strangely it worked OK for a while, then, audio during calls disappeared again.
(Toggling Bluetooth did not help. I don't have any issue with Bluetooth not working)
Also noticed increased Battery drain.
So i shall try CM10 as you suggested & will downgrade back to 9 or 7 if there are issues.
SandeepRoy said:
I reinstalled CM10.1 & strangely it worked OK for a while, then, audio during calls disappeared again.
(Toggling Bluetooth did not help. I don't have any issue with Bluetooth not working)
Also noticed increased Battery drain.
So i shall try CM10 as you suggested & will downgrade back to 9 or 7 if there are issues.
Click to expand...
Click to collapse
Make sure you use a full wiper script for the defy to avoid any issues.
Sent from my Nexus 7 using Tapatalk

[Q] WiFi not working-SlimKat

Alright first i want to say sorry for this being my second post in this section.
Down to the problem, i cant seem to get WiFi to work (turns on but wont scan or connect).
I have tried flashing the newest weekly build and reverted back to stable after that didn't work either, but when i tried my backup of cm10 (wich i was using before SlimKat) it worked perfectly fine.
Any suggestions?
I have the newest version of stable SlimKat for d2spr.
My phone is (obviously) d2spr
Thanks guys!
Anything? Please help guys.
Wifi not working
AlienFreek01 said:
Anything? Please help guys.
Click to expand...
Click to collapse
Mine is doing the same thing.
GS3 Sprint Running Slim 4.4.2 build 3-OFFICIAL-3060
I had the same problem once - only full wipe and reflash helped me to get wifi working again

Categories

Resources