Database Users

connect KF via Telnet

sorry for my poor English,,,
rooted, busybox needed,
adb shell
vi /data/opentel.sh
Code:
# cat /data/opentel.sh
busybox telnetd -l /system/bin/sh
echo " "
echo "Telnetd Service Running..."
busybox ifconfig | grep 'inet addr' | grep -v '127.0.0.1' | awk '{print $2}'
sleep 1
#echo " "
#echo "PID:"
var1=`busybox ps | grep telnetd | grep '/system/bin/sh' | awk '{print $1}'`
echo TELNET_PID=${var1}
echo " end"
sava, and exit vi editor,
chmod 755 /data/opentel.sh
Open Root Explorer, Then add this Shell Script to BookMark,
Everytime When need to telnet your KF, just Open R.E and run this BookMark ,
and run cmd "telnet KF_IP_ADDR" on PC,

I exec shell script with Tasker. That's works fine. and the script can run on booting.

Minfree script to /etc/init.d

Please script to /etc/init.d to set the minfree. I don't want any application, I want the script to autostart.

The script will be ok? I'm not asking about the value.
Code:
#!/system/bin/sh
#Created by hinxnz
#Set Minfree and Adj values
bb=$(find /system/ -name 'swapon')
if [ -n "$bb" ] && [ -e "$bb" ] ; then
bb=${bb%/*}
cd $bb
./busybox chmod 664 /sys/module/lowmemorykiller/parameters/minfree
./busybox echo "0,1,2,5,7,16" > /sys/module/lowmemorykiller/parameters/adj
./busybox chmod 444 /sys/module/lowmemorykiller/parameters/adj
./busybox chmod 664 /sys/module/lowmemorykiller/parameters/minfree
./busybox echo "9933,10728,14950,17510,20019,31385" > /sys/module/lowmemorykiller/parameters/minfree
./busybox chmod 444 /sys/module/lowmemorykiller/parameters/minfree
fi

Tell someone? The above and below are not working:
Code:
echo "0,1,2,5,7,15" > /sys/module/lowmemorykiller/parameters/adj
echo "5120,7680,11520,15360,20480,25600" > /sys/module/lowmemorykiller/parameters/minfree

This is the Nexus 7 2013 forum. I think you want this thread.

I know that this forum Nexus 7 2013. To him I need a script.

WSZR said:
I know that this forum Nexus 7 2013. To him I need a script.
Click to expand...
Click to collapse
Does the kernel you are using support init.d? What kernel?
If you have a kernel that supports it, is the perms set so it can execute? is it getting executed at all at startup?, maybe have it echo a value into a file to make sure it is getting executed. Does it execute and work if you run it manually?

I use ElementalX, supports init.d. BusyBox installed. In the terminal script "echo" works. Changing "minfree" in applications "Kernel Tweaker" works.
I can't verify startup. I tried the script from entering text into a blank file, not be made.
Code:
echo test > /data/data/file
In "init.d" is script to configure the kernel and perhaps to perform.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know how to manage permissions in "init.d". File with the script I gave full permissions. A postscript of permissions must be before the script?

The script is executed:
Code:
#!/system/bin/sh
chmod 664 /data/data/file
echo test > /data/data/file
chmod 444 /data/data/file
I'll try to convert to "minfree".

WSZR said:
I use ElementalX, supports init.d. BusyBox installed. In the terminal script "echo" works. Changing "minfree" in applications "Kernel Tweaker" works.
I can't verify startup. I tried the script from entering text into a blank file, not be made.
Code:
echo test > /data/data/file
In "init.d" is script to configure the kernel and perhaps to perform.
I don't know how to manage permissions in "init.d". File with the script I gave full permissions. A postscript of permissions must be before the script?
Click to expand...
Click to collapse
I use the same kernel.
The script for minfree that you try to run from init.d, did you set the perms to 777 on it? It sounds like you have, but I am just making sure.
Have you tried appending the lines (from your post #2 above), to /etc/init.d/99elementalx to see if they get executed?
Something else to try:
Backup 99elementalx first, then try placing these lines in 99elementalx at the bottom, just above "exit 0". (This assumes you have the binary busybox in /system/xbin (you should, it's the proper place for it for this device), or a path that is in your $PATH environment.)
Code:
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "0,1,2,5,7,16" > /sys/module/lowmemorykiller/parameters/adj
chmod 444 /sys/module/lowmemorykiller/parameters/adj
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "9933,10728,14950,17510,20019,31385" > /sys/module/lowmemorykiller/parameters/minfree
chmod 444 /sys/module/lowmemorykiller/parameters/minfree
#test to see if executed
echo test > /sdcard/minfreetest.txt
Reboot, and see if there is the word test in /sdcard/minfreetest.txt.
If so, cat your minfree and adj files and see if they have your desired values.

mdamaged said:
I use the same kernel.
The script for minfree that you try to run from init.d, did you set the perms to 777 on it? It sounds like you have, but I am just making sure.
Have you tried appending the lines (from your post #2 above), to /etc/init.d/99elementalx to see if they get executed?
Something else to try:
Backup 99elementalx first, then try placing these lines in 99elementalx at the bottom, just above "exit 0". (This assumes you have the binary busybox in /system/xbin (you should, it's the proper place for it for this device), or a path that is in your $PATH environment.)
Code:
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "0,1,2,5,7,16" > /sys/module/lowmemorykiller/parameters/adj
chmod 444 /sys/module/lowmemorykiller/parameters/adj
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "9933,10728,14950,17510,20019,31385" > /sys/module/lowmemorykiller/parameters/minfree
chmod 444 /sys/module/lowmemorykiller/parameters/minfree
#test to see if executed
echo test /sdcard/minfreetest.txt
Reboot, and see if there is the word test in /sdcard/minfreetest.txt.
If so, cat your minfree and adj files and see if they have your desired values.
Click to expand...
Click to collapse
When added to 99elementalx script works.
Strange that in a separate file does not work, even though other scripts are running.
Thanks for your help.

WSZR said:
When added to 99elementalx script works.
Strange that in a separate file does not work, even though other scripts are running.
Thanks for your help.
Click to expand...
Click to collapse
Well try this.
Comment out those lines from 99elementalx and create a new file /etc/init.d/98minfree
Put the contents in it below:
Code:
#!/system/bin/sh
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "0,1,2,5,7,16" > /sys/module/lowmemorykiller/parameters/adj
chmod 444 /sys/module/lowmemorykiller/parameters/adj
chmod 664 /sys/module/lowmemorykiller/parameters/minfree
echo "9933,10728,14950,17510,20019,31385" > /sys/module/lowmemorykiller/parameters/minfree
chmod 444 /sys/module/lowmemorykiller/parameters/minfree
#test to see if executed
echo newtest > /sdcard/minfreetest.txt
save it as /etc/init.d/98minfree ...then chmod it 777 (rwxrwxrwx), then reboot, and see if it worked.
If you have to leave it in 99elementalx to make it work, it will get wiped the next time you flash the kernel again. Alternatively, you can just forget init.d, and use tasker to execute the commands.

[email protected]@holic help thread

This is a thirteen step program for flashaholics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since there is no cure for flashaholism, we may as well give those afflicted more to flash..
**ALWAYS FLASH AT YOUR OWN RISK ANYTHING THAT GETS POSTED HERE**​
Just follow these simple steps:
1. Rate this thread 5 stars
2. Subscribe to this thread
3. Tell other flashaholics to join this thread
4. Treat all flashaholics with respect
5. Be on the constant lookout for anything new and noteworthy
6. Be helpful to those afflicted by posting these new found links
7. Always use protection when flashing (have a backup)
8. Don't be discrete about your flashing adventures, share your steamy details
9. Be helpful to outsiders that aren't as flash savvy as you and answer their posts nicely
10. If you feel a member is on the wagon, help them fall off by bragging about how cool your phone is
11. Remember to follow XDA rules
12. Happy flashing!!
13. Always thank your developers, and donate if you can..
BECOME PART OF AN ADDICTIVE COMMUNITY
I'm on telegram
HELP THE COMMUNITY AND JOIN THE ROM "WIKI"
You can add your knowledge to this growing chart of roms
-JOIN HERE-​
When not flashing I will update the thread with notable links of what, where, and how to flash..
Contributors
@#sychrome#
XDA community
Get your support banners -HERE-

WE'RE HERE FOR YOUR TUNING NEEDS
KA MOD (Kernel aduitor)
http://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-singularity-kernel-t3333549
How to apply profiles
http://forum.xda-developers.com/oneplus-one/development/rom-cm-12-builds-t3045053/post68636831
Lightning Kernel profiles
http://forum.xda-developers.com/oneplus-one/general/flshholic-help-thread-t2869514/post69351130
New Kernel profiles (jgcaap rom)
http://forum.xda-developers.com/oneplus-one/general/flshholic-help-thread-t2869514/post69271814
Moriarty Kernel profiles (S.O.S. rom)
http://forum.xda-developers.com/showpost.php?p=70181339&postcount=175
Battery Savings tips
1. Keep unneeded services off (location, BT, NFC, ect..)
2. Lower the screen brightness
3. Manage your apps with greenify (many apps will abuse services if you let them)
4. Don't discharge the battery to zero, and try to keep it cool (hot batteries discharge faster)

Settings Script
WELCOME TO SETTINGS SCRIPT
This is a set scripts I started collecting and working on since my days of old using a Nexus S. It has been updated and tested 100's of times and is ready for use on the OnePlus. I am not going to claim 1000's of points gained in benchmarks, or days of battery life, but it should help balance performance and battery..
Basically it's a collection of init.d scripts to gently modify some services, system, battery and various functions. This is active at boot (assuming you have init.d support and busybox). Please don't use this with other scripts (seeder is okay). Don't operate while intoxicated or holding an iPhone..
Code:
#!/system/bin/sh
# test
if [ -f /data/Test.log ] ; then
rm /data/Test.log
fi
echo "Script is working !!!" >> /data/Test.log
echo "excecuted on $(date +"%d-%m-%Y %r" )" >> /data/Test.log
# Expand Kernel Permission
if [ -e /dev/cpuctl/apps/cpu.notify_on_migrate ]; then
chown system.system /dev/cpuctl/apps/cpu.notify_on_migrate
chmod 0666 /dev/cpuctl/apps/cpu.notify_on_migrate
fi
# Cleaner
#Interval between runs, in seconds, 172800=48 hours
RUN_EVERY=172800
busybox rm -f /data/anr/*.*
busybox rm -f /data/cache/*.*
busybox rm -f /data/log/*.*
busybox rm -f /data/local/tmp/*.*
busybox rm -f /data/mlog/*
busybox rm -f /data/tombstones/*
busybox rm -f /data/backup/pending/*
busybox rm -f /data/system/dropbox/*
busybox rm -f /cache/recovery/*
busybox rm -f /dev/log/main/*
chmod 700 /data/system/dropbox
busybox chmod 700 /data/system/usagestats
# Zipalign
# 86400=24 hours
RUN_EVERY=86400
LOG_FILE=/data/zipalign.log
ZIPALIGNDB=/data/zipalign.db
if [ -e $LOG_FILE ]; then
rm $LOG_FILE;
fi;
if [ ! -f $ZIPALIGNDB ]; then
touch $ZIPALIGNDB;
fi;
echo "Starting FV Automatic ZipAlign $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
for DIR in /system/app /data/app ; do
cd $DIR
for APK in *.apk ; do
if [ $APK -ot $ZIPALIGNDB ] && [ $(grep "$DIR/$APK" $ZIPALIGNDB|wc -l) -gt 0 ] ; then
echo "Already checked: $DIR/$APK" | tee -a $LOG_FILE
else
zipalign -c 4 $APK
if [ $? -eq 0 ] ; then
echo "Already aligned: $DIR/$APK" | tee -a $LOG_FILE
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
else
echo "Now aligning: $DIR/$APK" | tee -a $LOG_FILE
zipalign -f 4 $APK /cache/$APK
cp -f -p /cache/$APK $APK
busybox rm -f /cache/$APK
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
fi
fi
done;
done;
touch $ZIPALIGNDB
echo "Automatic ZipAlign finished at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
# Renice
B=/system/xbin/busybox
( while true
do
sf=$( service list | $B grep -c "SurfaceFlinger" )
if [ $sf -eq 1 ]
then
service call SurfaceFlinger 1008 i32 1
break
else
sleep 2
fi
done
) &
# Kernel Tweaks
if [ -e /proc/sys/kernel/softlockup_panic ]
then
echo 0 > /proc/sys/kernel/softlockup_panic
fi
if [ -e /proc/sys/kernel/hung_task_timeout_secs ]
then
echo 0 > /proc/sys/kernel/hung_task_timeout_secs
fi
if [ -e /proc/sys/kernel/panic_on_oops ]
then
echo 0 > /proc/sys/kernel/panic_on_oops
fi
if [ -e /proc/sys/kernel/panic ]
then
echo 0 > /proc/sys/kernel/panic
fi
if [ -e /proc/sys/kernel/msgmni ]
then
echo 2048 > /proc/sys/kernel/msgmni
fi
if [ -e /proc/sys/kernel/msgmax ]
then
echo 64000 > /proc/sys/kernel/msgmax
fi
if [ -e /proc/sys/kernel/shmmax ]
then
echo 268435500 > /proc/sys/kernel/shmmax
fi
if [ -e /proc/sys/kernel/threads-max ]
then
echo 525810 > /proc/sys/kernel/threads-max
fi
if [ -e /proc/sys/kernel/nmi_watchdog ]; then
echo "0" > /proc/sys/kernel/nmi_watchdog;
sysctl -e -w kernel.nmi_watchdog=0;
fi;
if [ -e /proc/sys/vm/drop_caches ]; then
echo "3" > /proc/sys/vm/drop_caches;
sysctl -e -w vm.drop_caches=3;
fi;
#fsync
if [ -e /sys/devices/virtual/misc/fsynccontrol/fsync_enabled ]; then
echo "0" > /sys/devices/virtual/misc/fsynccontrol/fsync_enabled;
fi;
if [ -e /sys/class/misc/fsynccontrol/fsync_enabled ]; then
echo "0" > /sys/class/misc/fsynccontrol/fsync_enabled;
fi;
if [ -e /sys/module/sync/parameters/fsync ]; then
echo "0" > /sys/module/sync/parameters/fsync;
fi;
if [ -e /sys/module/sync/parameters/fsync_enabled ]; then
echo "0" > /sys/module/sync/parameters/fsync_enabled;
echo "N" > /sys/module/sync/parameters/fsync_enabled;
fi;
# Disable Sleepers
echo "NO_NEW_FAIR_SLEEPERS" > /sys/kernel/debug/sched_features;
echo "NO_NORMALIZED_SLEEPER" > /sys/kernel/debug/sched_features;
# Kill Media Tweak
LOG=/data/mediaserver_log.txt;
supolicy --live "allow mediaserver mediaserver_tmpfs:file { read write execute };";
if [ "$SDK" -le "18" ]; then
if [ "$SDK" -gt "10" ]; then
echo "Mediaserver kill" >> $LOG;
busybox killall -9 android.process.media;
busybox killall -9 mediaserver;
fi;
fi;
# Vsync tweak
if [ -e /sys/kernel/debug/msm_fb/0/vsync_enable ]; then
echo 0 > /sys/kernel/debug/msm_fb/0/vsync_enable
fi;
#Sqlite
# Log file location
LOG_FILE=/data/sqlite.log
#Interval between SQLite3 runs, in seconds, 604800=1 week
RUN_EVERY=604800
# Get the last modify date of the Log file, if the file does not exist, set value to 0
if [ -e $LOG_FILE ]; then
LASTRUN=`stat -t $LOG_FILE | awk '{print $14}'`
else
LASTRUN=0
fi;
# Get current date in epoch format
CURRDATE=`date +%s`
# Check the interval
INTERVAL=$(expr $CURRDATE - $LASTRUN)
# If interval is more than the set one, then run the main script
if [ $INTERVAL -gt $RUN_EVERY ]; then
if [ -e $LOG_FILE ]; then
rm $LOG_FILE;
fi;
echo "SQLite database VACUUM and REINDEX started at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE;
for i in `busybox find /d* -iname "*.db"`;
do /system/xbin/sqlite3 $i 'VACUUM;';
resVac=$?
if [ $resVac == 0 ]; then
resVac="SUCCESS";
else
resVac="ERRCODE-$resVac";
fi;
/system/xbin/sqlite3 $i 'REINDEX;';
resIndex=$?
if [ $resIndex == 0 ]; then
resIndex="SUCCESS";
else
resIndex="ERRCODE-$resIndex";
fi;
echo "Database $i: VACUUM=$resVac REINDEX=$resIndex" | tee -a $LOG_FILE;
done
echo "SQLite database VACUUM and REINDEX finished at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE;
fi;
#Lcd power
if [ -e /sys/class/lcd/panel/power_reduce ]; then
echo "LCD power reduce detected. Activating..";
echo "1" > /sys/class/lcd/panel/power_reduce;
fi;
# Properties tweak
setprop ro.kernel.android.checkjni 0
setprop debug.kill_allocating_task 0
setprop dev.pm.dyn_samplingrate 1
setprop pm.sleep_mode 1
setprop persist.sys.purgeable_assets 1
setprop persist.cust.tel.eons 1
setprop ro.ril.enable.amr.wideband 1
setprop ro.ril.transmitpower true
setprop ro.ril.sensor.sleep.control 1
setprop ro.config.combined_signal true
setprop ro.ril.hep 1
setprop wifi.supplicant_scan_interval 300
setprop cm.filesystem.ready 1
setprop persist.service.pcsync.enable 0
setprop persist.service.lgospd.enable 0
setprop ro.min_pointer_dur 1
setprop ro.sys.fw.bg_apps_limit 6
setprop ro.lcd_min_brightness 1
setprop persist.sys.use_dithering 0
setprop persist.sys.use_16bpp_alpha 1
setprop ro.max.fling_velocity 20000
setprop ro.min.fling_velocity 10000
#Ext4 mount
# Log file location
LOG_FILE=/data/fsck.log
if ( mount | grep -w ext4 ) then
echo "EXT4 Partition Found!"
echo "Remounting..."
mount -o noatime,remount,rw,discard,barrier=0,commit=60,noauto_da_alloc,delalloc /cache /cache;
mount -o noatime,remount,rw,discard,barrier=0,commit=60,noauto_da_alloc,delalloc /data /data;
mount >> /data/fsck.log;
else
echo "EXT4 Partition Not Found!"
fi;
echo "Script finished"
FLASH AT YOUR OWN RISK
INSTALLATION:
**Requires BusyBox and init.d support**
(For some Nougat roms emulation of init.d may be nessesary, use KA mod, or another app for init.d emulation..)
Just flash in recovery, no extra steps required to enjoy..
It removes the old version, so flash and forget, it also survives a dirty flash (v5.5+)..
This has been tested, but no guarantees for protection from aliens or ninjas..
SPECIAL THANKS TO: @h-cspu @7u5h4r @Stone_88@ashutoshmn @Purerawenergy and @maxed4901 for helping me improve it..
Unless there's a bug fix or something I like, this won't get updated further.. NO ETAS
DOWNLOAD(s)
https://www.androidfilehost.com/?w=files&flid=123565
SCRIPTS & UNINSTALLER
LATEST UPDATE
VERSION: 6.1 SS Beta 08/04/2017
VERSION: 3.1 SS Stable 08/04/2017
Enjoy

Mine

CARBON
DOWNLOAD
Normal ext4 Debloated, with Android L keyboard and MiXplorer
Converted F2FS Converted, debloated, with Android L keyboard and MiXplorer.. THIS DOES NOT NEED A KERNEL FLASHED OVER THIS it is an "all in one" convert and is complete..
Original from Moonlight Original with extra Chinese apps

Not mine

yeeeaaaaaa
Sent from my 1+1

Thank you so much for bringing us carbon!

For the spreadsheet, it requires access. Don't forget to change the permissions
You need permission
Want in? Ask the owner for access, or switch to an account with permission. Learn more
Click to expand...
Click to collapse

zephiK said:
For the spreadsheet, it requires access. Don't forget to change the permissions
Click to expand...
Click to collapse
I'll get that fixed, its a work in progress..
Sent from my One using XDA Premium 4 mobile app

My name is ninjanurse, and I am a [email protected]@holic
Sent from my One A0001 using Tapatalk

welcome, ninjanurse
Sent from my 1+1

ninjanurse said:
My name is ninjanurse, and I am a [email protected]@holic
Sent from my One A0001 using Tapatalk
Click to expand...
Click to collapse
I think you need to tell the group about your latest flashing exploits, and don't forget to brag..
Sent from my One using XDA Premium 4 mobile app

Hello i am primo14z
and i can't stand to have one ROM to much time :/
so ya they say that first step is to face yourself with the problem , so I am a [email protected]@holic
i tryed Carbon ROM and i must say works great, but doesn't have that special something why would i make it my daily

I'm a [email protected]@holic as well, dansou901 is my name. My method of getting along is having multirom installed, it helps alot with all the flashing...

dansou901 said:
I'm a [email protected]@holic as well, dansou901 is my name. My method of getting along is having multirom installed, it helps alot with all the flashing...
Click to expand...
Click to collapse
I wonder if multirom works on f2fs?..
**using that search thingy, it turns out that multirom does indeed support f2fs..
Sent from my One using XDA Premium 4 mobile app

Setting.Out said:
I wonder if multirom works on f2fs?..
**using that search thingy, it turns out that multirom does indeed support f2fs..
MultiROM really helps me to stay a real [email protected]@holic, why choose a rom of choice.. I can have them all...
Click to expand...
Click to collapse

ninjanurse said:
Setting.Out said:
I wonder if multirom works on f2fs?..
**using that search thingy, it turns out that multirom does indeed support f2fs..
MultiROM really helps me to stay a real [email protected]@holic, why choose a rom of choice.. I can have them all...
Click to expand...
Click to collapse
As long as you don't run out of storage space...
Click to expand...
Click to collapse

ninjanurse said:
As long as you don't run out of storage space...
Click to expand...
Click to collapse
Binge and purge!!..
Sent from my A0001 using XDA Premium 4 mobile app

I just moved back to ext4 from f2fs.. For a Flashaholic that was a long time to be limited in how and when you can flash.. I was going through withdrawls, so I flashed 4 roms 3 recoveries and 1 kernel along with gapps and the lot as well.. AHHHH... Much better.. And honestly, I know that f2fs is supposed to be faster, but even if it is, I want a bit more freedom to flash.. I'm not saying I won't try it again, but not for a while..
I will have some updated links to websites/roms this week as well as more than just a shell of a chart.. I think the chart(s) will really help others see what a rom has to offer..

[SCRIPT] Log CPU Usage with interval (Linux)

Hey guys, I've just decided to get inside of the Android development world. Anyways, I'm mostly a fan of Linux, so I've made my first Linux script, I know it's simple, but I've never interacted with the user before, or picked an output. When I knew that Android made use of Linux in its core, my interest on working inside it grew up faster than ever.
In my script, firstly, you type the filename. For compatibility reasons, it'll everytime save to /sdcard/filename. Then, it will ask you how many times you want the script to log everything, and lately, every how many seconds should it save everything to the file.
The script will save, before every entry at the log, the screen status (if it's on or off), that can help to, for example, if your device has been lagging as a result of a bad screen driver or UI error.
Last thnig: it also works on recovery (maybe it give some error, and if no dumpsys is present on your recovery's ramdisk, it'll save everything as OFF).
Remember to send it anywhere excepting from /storage and any sbudir, it won't work as the Android permissions system blocks script execution on those dirs.
Code:
clear
# Wipe $logfile content in /sdcard (if any existing)
echo "Please type the filename where you want to save the log: "
read -r logfile
echo "" > /sdcard/$logfile
echo "Deleted previous log."
echo "SCREEN | CPU" >> /sdcard/$logfile
#cont=60
cont=1
#SHOWLOG=X
echo "Please type how many times the cycle must repeat: "
read -r maxcont
echo "Please type how many seconds will the interval take: "
read -r maxmin
clear
# Here it counts how many times the logging script has been ran
while [ $cont -lt $((maxcont + 1)) ];
do
# That nested while takes control of how many seconds have passed in the current cycle
while [ "$contmin" -lt "$maxmin" ];
do
contmin=$((contmin + 1))
sleep 1
clear
echo "C: $cont/$maxcont - T: $contmin/$maxmin"
done
# echo "$maxmin seconds passed."
# Logs the fist line of "busybox top" to a var
LOGVAR=$(busybox top -d 1 -n 1 | grep "idle")
# Logs the screen state (on or off) to another var
SCREENSTATE=$(dumpsys input_method | grep mScreenOn | tr -dc '[:alnum:]\n\r' | tr '[:upper:]' '[:lower:]')
# Saves a string that tells what it should expect if the screen is on
SCREENSTATEON="msystemreadytruemscreenontrue"
if [ "$SCREENSTATE" == "$SCREENSTATEON" ]
then
echo "ON: $LOGVAR" >> /sdcard/$logfile
else
echo "OFF: $LOGVAR" >> /sdcard/$logfile
fi
cont=$((cont + 1))
contmin=0
done
echo "Show logged values? [Y/N]"
read -r SHOWLOG
case $SHOWLOG in
[yY] | [yY][Ee][Ss] )
cat /sdcard/$logfile
;;
[nN] | [n|N][O|o] )
echo "Ok, goodbye. You'll see a what you've asked me to log in /sdcard/$logfile";
exit 1
;;
*) echo "You must write Y or N to continue."
;;
esac
exit 0
For example, save it as script.sh (remember to save it using Unix codifcation, if you're running Windows, else, it'll tell you that it's unable to find many binaries, as long as Linux isn't ok with CR+LF and requires LF as newline). Then, send it to the sdcard (over USB or adb push script.sh /sdcard/) , now, run ADB shell. Type the following commands:
Code:
su -c "cp -f /sdcard/script.sh /data/local/;chmod 777 /data/local/script.sh"
Then, if you want to run it:
Code:
su
sh /data/local/script.sh
That's all, I hope you enjoy it and not so many people kills me for explaining and feeling so grateful for that simple script.

[NO ROOT] Amazon Fire TV Setup Tool [ Kills Amazon Launcher + XFINITY STREAM 2017 ]

Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
or download it:
https://www.sendspace.com/file/epob8z

Thank you so much, I can't root my fire TV and I'm sick and tired of the Amazon launcher. I will be setting it up tomorrow. Will post back with results

Nvmd, finally got it.

This can be ran as a straight native Windows batch without having to install Bash support. Replace "sleep 1" with "timeout -t 1"
(or you can just paste ^^ into a properly connected ADB console with apks in the right places, will fail on "sleep 1" but it worked for me)
EDIT: Also works fine with Tvlauncher 2 rename the apk to tvlauncher like in the package and thanks OP! Home button seems to work fine for me!

installation help
Please help me install this fire tv setup tool i have a newer fire tv and dont know what to do with the download. i am not a pro but can follow directions and i hate the fire tv launcher.
Please help
Thank You

1. open a command prompt to the directory that contains ADB and put everything from the download in the same folder.
2. in the console window "adb connect xxx.xxx.xxx.xxx" where the x's are your IP of your FireTV\Stick (no quotes)
3. cut\paste the script from above into the console (cmd) window and run it...
4. it will error on "sleep 1" but continue and finish fine. If you want to correct the script for Windows batch scripting, replace "sleep 1" with "timeout -t 1" and save it as a .bat file.
I don't understand why this was only posted as a bash script (it is the best non-root hack there is). Windows doesn't support bash out of the box, and 99 percent of the people who download the script wont know what to do with it. BTW this works, and even works with other launchers. I use Tv launcher 2 which supports (its own special) widgets. No root. Never see the amazon launcher. Block updates, and do it asap.
EDIT: Fire Stick 2 fyi

So do we need to use the tvlauncher apk for the xfinity app to work?
What is the tv launcher? Same UI as the newer aftv ui (-ads?)
Only reason I don't just jump in and test it is Im not 100%sure how to undo it. Just uninstall the apks?
Thanks
UPDATE-I just went for it and it works....sort of.
It immediately launches the new UI but after setting it up, when I hit the home button it just returns to the normal AFTV launcher.
***This is actually preferable to me since all I really wanted was the Xfinity stream app to work. I tried just extracting the apk and installing it on my other Fire TV but it said incompatible.

First I would like to say thank you for a great tool to use on non rooted devices, I love it.
One thing i noticed is, that most people still won't know what to do with this tool so i will try and help explain better
-download adb and install it, if you haven't already
-download the file OP has at top of post
-extract the zip file
-copy and paste the code at top of OP into NOTEPAD
-change every spot that says "Sleep 1", erase that and copy and paste this there instead "timeout -t 1
-click file at the top left in notepad and click save as name it FireTV.bat
-goto your adb folder of install, usually C:\Program Files (x86)
-erase the "sh file" in the file you downloaded and extracted from the OP earlier
-put the new FireTV.bat you just made in that folder you just erased the "sh file" from
-now put all of those files into the adb folder you just opened and found,"launcher hijack apk, TVLauncher apk, x43Stream apk and your FireTV.bat files."
-hold on shift and right click with your mouse to open and command promnt here, if that doesn't show powershell works as well, it depends on your windows version.
-type "adb connect 192.168.1.8 or whatever you ip is for your FIreTV, this is found by going to settings, device, about and scroll down to network and it will list your IP
-if right it will say connected to device
-now simply left click hold and drag the FireTV.bat file you just created into the command promt and press enter
-that is it should work just fine.
I usually don't do this so I hope I helped a little bit.

Ok, just tried this, works pretty flawless. Sometimes you have to press home a couple times to get it to work(but that's no big deal). One thing i did notice though, if you have appstarter/firestarter (forget its name) it launches it instead, simple fix is to uninstall it then run the .bat again.
Does this work on firestick as well? Would hate to mess something up lol.
Edit.
For anyone wondering, no this does not work on firestick, it will install the apps but thats it.

TimmyP said:
This can be ran as a straight native Windows batch without having to install Bash support. Replace "sleep 1" with "timeout -t 1"
(or you can just paste ^^ into a properly connected ADB console with apks in the right places, will fail on "sleep 1" but it worked for me)
EDIT: Also works fine with Tvlauncher 2 rename the apk to tvlauncher like in the package and thanks OP! Home button seems to work fine for me!
Click to expand...
Click to collapse
Do you have a safe download link for the Tvlauncher 2 apk? Also so all I do is change Tvlauncher in the script to Tvlauncher2 and replace the apk in the download file?

Would it be possible to add a app killer similar to firestarter when you press the menu key, even if just to launch system default app manager? If it had that i think it'd be perfect.

Can anyone add screenshots or video of what this looks like when completed?

enigma7820 said:
First I would like to say thank you for a great tool to use on non rooted devices, I love it.
One thing i noticed is, that most people still won't know what to do with this tool so i will try and help explain better
-download adb and install it, if you haven't already
-download the file OP has at top of post
-extract the zip file
-copy and paste the code at top of OP into NOTEPAD
-change every spot that says "Sleep 1", erase that and copy and paste this there instead "timeout -t 1
-click file at the top left in notepad and click save as name it FireTV.bat
-goto your adb folder of install, usually C:\Program Files (x86)
-erase the "sh file" in the file you downloaded and extracted from the OP earlier
-put the new FireTV.bat you just made in that folder you just erased the "sh file" from
-now put all of those files into the adb folder you just opened and found,"launcher hijack apk, TVLauncher apk, x43Stream apk and your FireTV.bat files."
-hold on shift and right click with your mouse to open and command promnt here, if that doesn't show powershell works as well, it depends on your windows version.
-type "adb connect 192.168.1.8 or whatever you ip is for your FIreTV, this is found by going to settings, device, about and scroll down to network and it will list your IP
-if right it will say connected to device
-now simply left click hold and drag the FireTV.bat file you just created into the command promt and press enter
-that is it should work just fine.
I usually don't do this so I hope I helped a little bit.
Click to expand...
Click to collapse
Very helpful but I had to correct a few lines:
-There was a "Sleep 3" I had to change to "timeout -t 3"
-In powershell I had to type ".\adb connect 192.168.xx.xxx" to get it to work.
-The left click hold and drag the FireTV.bat file didn't do anything so I just typed "FireTV.bat" on the command prompt and it ran.
Thanks for your help.

nyln said:
Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
or download it:
https://www.sendspace.com/file/epob8z
Click to expand...
Click to collapse
The sendspace link is very slow,
Here is a direct download link: https://ipfs.works/ipfs/QmXnYYH5iSnsa4DQdQED8RapgM4pA7v6EV3bzfGdoR9sMp/Amazon_Fire_TV_Setup_Tool.zip
md5sum: 8847a2b99afee549e2f5f973d86bfa51

Thread cleaned. XDA-Developers is a site for all, including those whose main languages and experience levels may vary.
If you're unwilling or unable to treat people with the civility we all deserve, kindly consider a break away from the keyboard.
Thank you all for your cooperation.

Sorry Somehow my post posted twice! not sure how to delete it so i'm editing this one

nyln said:
Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
or download it:
https://www.sendspace.com/file/epob8z
Click to expand...
Click to collapse
I'm assuming this is using adb tcpip? I have a very Epic setup of bash scripts for setting up Fire Devices. I made it for my brother.
Anyways here is the chunk of code will grab your current connected networks and provide a list to choose from. Example if you have to it would show: 192.168.0.1 & 10.0.0.1 . When you choose one it will scan your network for Fire Devices with port 5555 open and present you with a list of found devices. You can choose to connect to a specific one or connect to them all.
There is a lot of extra code in this that needs to be removed. Right now i dont have the time to clean it up so hopefully you can! Also this chunk of code requires nmap to be installed. FYI This runs on Kali Linux but should work on other distro's but you may have to account for sudo usage.
Code:
function NetworkScan() {
function GetNetworks() {
echo -e "\n\n"
cd $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g") &>/dev/null
TotalConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | sort | uniq | wc -l)"
ConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -iv "offline" | sort | uniq | wc -l)"
ConnectedOffline="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -i "offline" | sort | uniq | wc -l)"
prompt="$(echo -e "\e[96m][NT3L][G3NC][ NetworkPicker Menu:\e[0m")"
IP=$(for file in $(ifconfig | egrep -o "wlan.:|eth.:" | cut -d" " -f1 | sed -e "s/://g"); do ip addr show $file | grep -w inet | cut -d"/" -f1 |sed -e 's/\<inet\>//g' -e 's/^[ \t]*//' | grep "[1-9][0-9]" | cut -d'.' -f1,2,3; done | sort | uniq)
options=( $(for file in $(echo "$IP"); do echo "$file.1/24"; done | sort | uniq | xargs -0) )
echo -e " $prompt $TotalConnectedDevices "
echo -e " [\e[96m$ConnectedOffline\e[0m]----------------------------------[\e[96m$ConnectedDevices\e[0m]"
echo -e " $RemoteKodi "
echo -e ""
select opt in "${options[@]}" "All" ; do
if [[ $REPLY = 'QUIT' || $REPLY = 'quit' ]] ; then
exit 1
elif (( REPLY == 1 + ${#options[@]} )) ; then
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif (( REPLY > 0 && REPLY <= ${#options[@]} )) ; then
clear
NetworkScan "$opt"
else
echo -e "Invalid option. Try another one."
sleep 2 &>/dev/null
clear
StartMenu
fi
done
}
Args=( $(for file in $(echo "[email protected]"); do echo "$file" ; done | xargs -0) )
ArgsCount=${#Args[@]}
if [ "$ArgsCount" = '0' ]
then
GetNetworks
else
echo "${Args[@]}" | grep "\.1/24" &>/dev/null
if [ "$?" = '0' ]
then
options=( $(for file in $(echo ${Args[@]}); do nmap -p 5555 $file -oG - | grep "open" | cut -d" " -f2 ; done | xargs -0) )
else
options=( $(for file in $(echo ${Args[@]}); do echo $file ; done | xargs -0) )
fi
echo -e "\n\n"
cd $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g") &>/dev/null
TotalConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | sort | uniq | wc -l)"
ConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -iv "offline" | sort | uniq | wc -l)"
ConnectedOffline="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -i "offline" | sort | uniq | wc -l)"
prompt="$(echo -e "\e[96m][NT3L][G3NC][ NetworkScan Menu:\e[0m")"
echo -e " $prompt $TotalConnectedDevices "
echo -e " [\e[96m$ConnectedOffline\e[0m]----------------------------------[\e[96m$ConnectedDevices\e[0m]"
echo -e " $RemoteKodi "
echo -e ""
select opt in "${options[@]}" "All" "Pick Network" ; do
if [[ $REPLY = 'QUIT' || $REPLY = 'quit' ]] ; then
exit 1
elif [[ $REPLY = 'KILL' || $REPLY = 'kill' ]] ; then
clear
killall adb gnome-terminal xterm terminator &>/dev/null
exit 1
elif [[ $REPLY = 'LIST' || $REPLY = 'list' ]] ; then
clear
$(declare -f ListDevicesConnected)
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'REFRESH' || $REPLY = 'refresh' || $REPLY = 'RELOAD' || $REPLY = 'reload' ]] ; then
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'FireStarter' || $REPLY = 'fIREsTARTER' ]] ; then
clear
xterm -e $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/Scriptz/FireStarterUP.sh &
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'APK' || $REPLY = 'apk' ]] ; then
clear
for apk in $(find $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/AApushApk/SendAPK -type f -iname "*.apk"); do adb install "$apk" ; done
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'REBOOT' || $REPLY = 'reboot' ]] ; then
clear
$(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/Scriptz/RebootDevices.sh
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'stop' || $REPLY = 'STOP' ]] ; then
clear
adb kill-server
adb start-server
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'HELP' || $REPLY = 'help' ]] ; then
clear
echo -e "$(HelpMe)"
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'USBCHECK' || $REPLY = 'usbcheck' || $REPLY = 'usb' || $REPLY = 'USB' ]] ; then
terminator -e dmesg -wH &
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'html' || $REPLY = 'HTML' ]] ; then
clear
xterm -e $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/Scriptz/GenerateHTML.sh
iceweasel $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/ScreenShots/index.html &
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'BACK' || $REPLY = 'back' || $REPLY = 'Menu' || $REPLY = 'menu' || $REPLY = 'MENU' ]] ; then
clear
StartMenu
elif [[ $REPLY = 'UpdateKodi' || $REPLY = 'uPDATEkODI' ]] ; then
clear
KodiAPKMenu
elif (( REPLY == 1 + ${#options[@]} )) ; then
clear
for file in $(echo ${options[@]}); do adb connect "$file" ; done
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif (( REPLY == 2 + ${#options[@]} )) ; then
clear
GetNetworks
elif (( REPLY > 0 && REPLY <= ${#options[@]} )) ; then
clear
adb connect "$opt"
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
else
echo -e "Invalid option. Try another one."
sleep 2 &>/dev/null
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
fi
done
fi
}
The chunk of code above is setup to be a Menu in the terminal. NetworkScan is just one of the Menu options. If you make a base Menu setup with options: "Network Scan" , "Install APKs", "Change Launcher" etc. you could have "Change Launcher" launch a script that would have something like this in it.
Code:
for DroidID in $(adb devices 2>/dev/null | grep -v "List" | grep -v "daemon" | grep -v "^$" | cut -f1)
do
xterm -e $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2)/Scriptz/Clean.sh "$DroidID" &
done
The above script gets all connected devices and then loops through their serial starting another script while passing the serial as a parameter. You would need to make sure the script that gets ran applies the parameter as the serial. Example below is used to remove all 3rd party apps installed, data and then uninstall it
Code:
#!/bin/bash
SerialNum="$1"
IsDeviceOffline="$(adb -s "$1" devices | grep "$1" | cut -f2)"
function AutoClean() {
echo -e ""
echo -e "Clearing App Data And Removing APKs"
for file in $(adb -s "$1" shell pm list packages -3 | cut -d':' -f2)
do
adb -s "$1" shell pm clear "$(echo "$file" | tr -d '\r')"
adb -s "$1" uninstall "$(echo "$file" | tr -d '\r' )"
done
echo -e ""
read -p "Finished Auto Cleaning"
}
echo -e "$IsDeviceOffline" | grep -i "offline" &>/dev/null
if [ "$?" != '0' ]
then
AutoClean "$SerialNum"
else
echo -e "Device:"$SerialNum" Is Offline!"
read -p "Exiting Script"
fi

nyln said:
Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
Thanks for this. I use a slightly edited version of this on all of my firesticks now.
Click to expand...
Click to collapse

Anyone knows if is there a new update for the xfinity app for the firetv?

zeroth said:
Anyone knows if is there a new update for the xfinity app for the firetv?
Click to expand...
Click to collapse
Bump