Hi,
I've set up my Defy + with CM10.1 -20130709 Quarx and SetVsel to 1200.
Its very sluggish, both before and after the overclock. It takes 3-4 seconds to open the dialler , and a second or 2 to change screen orientation.
Could someone recommend perhaps a faster ROM or course of action ?
Regards,
Dory.
Dory Dasbooty said:
Hi,
I've set up my Defy + with CM10.1 -20130709 Quarx and SetVsel to 1200.
Its very sluggish, both before and after the overclock. It takes 3-4 seconds to open the dialler , and a second or 2 to change screen orientation.
Could someone recommend perhaps a faster ROM or course of action ?
Regards,
Dory.
Click to expand...
Click to collapse
Try kitkat (cm11). It is faster like cm7 with few bugs
Sent from my MB526 using Tapatalk 2
pradeeppk said:
Try kitkat (cm11). It is faster like cm7 with few bugs
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll give that a go.
Related
As the thread title says.
CM9 RC2
Please give your feedbacks.
I'm still downloading it on my slow internet. :/
I wish I had 2 Arc, I'm too lazy to flash my phone now
pveyes said:
I wish I had 2 Arc, I'm too lazy to flash my phone now
Click to expand...
Click to collapse
lol, already flashing it last nite.. haha, the best ROM ever dudes!! :good::good:
Cm9 rc2 has a lot of bugs! Sometimes the camera shuts down, video recording doesn't work. Every time I try to video record it just closes down on me! For me cm9 r1 was way smoother then rc2, I just hope they fix this errors!!!
Sent from my Arc S using Tapatalk 2
malia85 said:
Cm9 rc2 has a lot of bugs! Sometimes the camera shuts down, video recording doesn't work. Every time I try to video record it just closes down on me! For me cm9 r1 was way smoother then rc2, I just hope they fix this errors!!!
Sent from my Arc S using Tapatalk 2
Click to expand...
Click to collapse
yeah, lots of bug.. btw, im not using kernel 130.. 128c kernel works fine for me..
Hi,
Which is the smoothest(not the fastest) ROM for your Defy(+)?
Now I'm on the CM10-20120828-NIGHTLY-mb526.zip(1.3GHz), thanks Quarx, great ROM, but it's not so smooth as I expected.
Sometimes lags a lot.
PDJV said:
Hi,
Which is the smoothest(not the fastest) ROM for your Defy(+)?
Now I'm on the CM10-20120828-NIGHTLY-mb526.zip(1.3GHz), thanks Quarx, great ROM, but it's not so smooth as I expected.
Sometimes lags a lot.
Click to expand...
Click to collapse
GREEN LENS or RED LENS?
I would say CM7 (with a replacement launcher, because ADW isn't so smooth) or Ms2Ginger. I didn't try miui since a long time, but it used to be smooth.
@bds bamrah: if he used CM10 for MB526, then his phone is apparently Red lens.
Sent from my MB525 using xda app-developers app
try whiterabbit 1.6 is fast as hell and the interface is really nice
oops...ya its red lens probably,try pikachu...its smooth and fast
sa3e1 said:
I would say CM7 (with a replacement launcher, because ADW isn't so smooth) or Ms2Ginger. I didn't try miui since a long time, but it used to be smooth.
@bds bamrah: if he used CM10 for MB526, then his phone is apparently Red lens.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
bds bamrah said:
oops...ya its red lens probably,try pikachu...its smooth and fast
Click to expand...
Click to collapse
wHAT SBF did u used to flash the kernel before installing pikatchu ?
miui2.3.7 good
ive tried some different roms so far, but i need my nexus to work properly so id like to know whats the best rom and kernel in terms of smoothness and battery? now im with google experience 100.1% with stock kernel. id like something new but that works perfectly with no bugs!
thanks guys!
"something new with no bugs"
-wait a little more for CM10.1 stable
ej8989 said:
"something new with no bugs"
-wait a little more for CM10.1 stable
Click to expand...
Click to collapse
i mean something new to try.. not something new like 4.2. sorry
Stay at what you are now or try cm 10
Sent from my Nexus S using xda premium
cm10 is said to be better? smoother? faster?
Well, it's a bit different stock rom is really smooth. I think cm10 stable is as smooth as well providing you use cm default kernel. Just try it yourself, it's nice.
However, if you're into looking for new things you may as well try cm10.1 nightlies. I'm amazed by how well it runs. Super fast and looking nice. Just disable lockscreen widgets(if you dont like them like me) and you're good to go
Sent from my Nexus S using xda premium
are there some bugs into the cm10.1? could u post some screenshots pls?
ldmauro said:
cm10 is said to be better? smoother? faster?
Click to expand...
Click to collapse
I never like CM roms. They wasn't never 100% stable.
Just install RasBeanJelly and marmite 7.2.3CM...i use it right now and is awesome rom...there you have also a my darkbeanjelly theme for this rom
On the road with my Nexus S...
ldmauro said:
are there some bugs into the cm10.1? could u post some screenshots pls?
Click to expand...
Click to collapse
Sometimes autorotation stops working. Just install it and see yourself
Sent from my Nexus S
are there some bugs?
Dude, just try cm10.1. You won't regret
Sent from my Nexus S
i just want to know if there are some bugs cause i need taht my phone works!!
ldmauro said:
i just want to know if there are some bugs cause i need taht my phone works!!
Click to expand...
Click to collapse
I'm using Helly Bean 4.2.1 right now and i'm not noticing any bug yet. The kernel that comes with it even performs good enough so you don't need to flash a custom kernel.
If you want your phone as bug-free as possible, i suggest flashing MDO 11.10 for now, then flash a CM 10.1 based rom when Cyanogenmod team already released a stable version.
Flash cm 10 stable version!! HUUUGGEE battery life, and perfect as daily driver!
Sent from my Nexus S using Tapatalk 2
CM10 Stable, Marmite Kernel (Row / SmartAss2). Very Stable.
ldmauro said:
i just want to know if there are some bugs cause i need taht my phone works!!
Click to expand...
Click to collapse
Using CM10.1 nightly as daily driver, and I haven't experienced any bugs, other that the tilt sometimes stop working (reboot gets it to work again)
You can read more about it here (and se what issues other people have experienced) - Remember CM10.1 is only nightly's so far, so always look on the last page of the thread.
http://forum.xda-developers.com/showthread.php?t=2058536
CM10.1 is a lot smooter than cm10,
For some reason, i keep going back to CM every time I try something else. There are always something that is buggin me with the other roms.
I have used CM9, CM10 and CM10.1 (nightlies) on my i9023 - CM9 was last one stable for me - worked like a charm. Both CM10 and CM10.1 crashes few time a day (all at default setting) - would not recommend for someone, who need to make sure phone is working - oftentimes can't answer calls, when some other application is running.
Using cm10.1 had some reboots only when tried to overclock. Otherwise it just works without any crashes. You should try to install after full wipe.
jojoost said:
Flash cm 10 stable version!! HUUUGGEE battery life, and perfect as daily driver!
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
I'm also getting best battery life I've ever gotten on any ROM. Just the other day I got 5 hours & 20min of screen on time with 17+ hours total since I unplugged the phone.
Sent from my Nexus S 4G using xda premium
Killasmoke said:
I'm also getting best battery life I've ever gotten on any ROM. Just the other day I got 5 hours & 20min of screen on time with 17+ hours total since I unplugged the phone.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Stock kernel?
Sent from my Nexus S using Tapatalk 2
Anyone can play smoothly Temple Run 2 at "Best Visual Quality"?
I' m with last cm10, custom kernel, overclocked to 1.0 Ghz, and it isn' t smooth.
If yes, tell me which rom do you use and your overclock configuration.
i was on miui ics and honestly it was not smooth at all...
now rolling back to miui gb will update u soon
I m on JellyBeanCannon.
It runs smooth on better settings but lags on best.
For me it runs completely smooth when the app has finally booted - boot up takes quite some time.
Settings are on middle setting.
My machine:
Defy (green)
latest CM7.2 nightly by maniac
governor boosted
[email protected]/[email protected]/[email protected]
Rein haun
Also smooth on latest wiui gb
@1200 mHz, although it should run fine with stock settings as well
Sent from my MB526 using xda premium
gedhe said:
For me it runs completely smooth when the app has finally booted - boot up takes quite some time.
Settings are on middle setting.
My machine:
Defy (green)
latest CM7.2 nightly by maniac
governor boosted
[email protected]/[email protected]/[email protected]
Rein haun
Click to expand...
Click to collapse
thekguy said:
Also smooth on latest wiui gb
@1200 mHz, although it should run fine with stock settings as well
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yes, thanks... but with "Visual Quality" setted to "Best"?
:thumbdown: Nope lags alot guys .. I'm @ cm 10 jb 4.1.2 updated Jan' 13 ... though in India play store does not show this app on games dock.. got temme from other external link after t launch for android at 10hrs .... okiie :thumbdown:
Sent from my MB526 using xda app-developers app
Very much smooth on jb canon rom.
From 4.1.2 jelly defy @1.1Ghz \m/
Not smooth on cm10 and wiui gb with visual quality set to best, very smooth when visual quality is set to better on both roms, the default value
Sent from my MB526 using xda premium
not smooth at all on CM10!
if the word is right, i could say: unplayable!
i'll try it on MIUI V4 by Stefan now, let u guys know later.
piunti said:
not smooth at all on CM10!
if the word is right, i could say: unplayable!
i'll try it on MIUI V4 by Stefan now, let u guys know later.
Click to expand...
Click to collapse
Working fine on latest CM10 here!
Quality set to good. Haven't tried best
Try quality set to better, I'm using latest cm10 with sevenrock fixed [email protected] mHz, ksm and zram disabled. The game is absolutely smooth for me
Sent from my MB526 using xda premium
Thekguy, how long is your battery lasting running on 1200mhz?
On topic: not smooth as well on miui v4.
Now it came to my thoughts, it may be the lookout security running here.
With full charge in the morning I have around 30 % left at night with some gaming + 3G + Wi-Fi.
Vsels are:
18-300
32-600
42-800
60-1200
On topic- I find performance to be lower on the older non 2ndboot cm10 or cm9 builds
Sent from my MB526 using xda premium
runs smooth on canon v8.1.1 clocked @1.2GHz frequency is according to vsel calculator!
butter smooth on official cm7.2 @1Ghz with v6 supercharger script installed!
Latest CM7 by Maniac103 here. Runs smooth on "better", a bit stuttery on "best" but still playable.
Runs without any lag on my cm10. I prefer to play it on my defy than to my O3D.
my current score is 12.4 million without any hack, I love playing this game
Smooth on CM10 1.2 GHz with better graphics and latest game update. Playable with best graphics but lags.
brajesh.sharma87 said:
Runs without any lag on my cm10. I prefer to play it on my defy than to my O3D.
my current score is 12.4 million without any hack, I love playing this game
Click to expand...
Click to collapse
What is your multiplier mate
Hello. I have question. What is the best rom for my defy? I have: CM 7.2 ; Android Gingerbread 2.3.7 and overclocked cpu from 800 mhz to 1100 mhz. Some games have lags, but in csr racing when i play hmm maybe 2 minutes maybe 3 i have no lags in race but in menu still have lags!? My friend told me best android is GB 2.3.4 stock, but i can't find this andoid, and i can't install :/ i'm beginner in android systems. Please help me with choose stable and smooth system for my defy . Oh i use Set CPU (not Set Vsel (****, more lags, cpu still change speed)) and sysctl config. I can wait for your ideas
DjEvill said:
Hello. I have question. What is the best rom for my defy? I have: CM 7.2 ; Android Gingerbread 2.3.7 and overclocked cpu from 800 mhz to 1100 mhz. Some games have lags, but in csr racing when i play hmm maybe 2 minutes maybe 3 i have no lags in race but in menu still have lags!? My friend told me best android is GB 2.3.4 stock, but i can't find this andoid, and i can't install :/ i'm beginner in android systems. Please help me with choose stable and smooth system for my defy . Oh i use Set CPU (not Set Vsel (****, more lags, cpu still change speed)) and sysctl config. I can wait for your ideas
Click to expand...
Click to collapse
I played games with this option:
latest CM7 Euroskank Gingerbread+1.15Ghz Overclock+LMK Set by Autokiller Memory optimizer(extreme)+removed useless system apps
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
runeupo said:
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
What is the taki_jeden rom? Oh i see it's JB . But it's only spain language?
taki_jeden rom is in Polish and in English
Sent from my MB526 using xda app-developers app
runeupo said:
have you tried taki_jeden rom?
it's very fluent and smooth, no scroll cache, i use inter-active governor and cpu runs on 1.1ghz
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Lol
Rom has a lot of bugs mate
Xperia d 4.1 is best for gaming
I played almost every hd game in it
Sent from my MB526 using xda premium
Rawwr said:
Lol
Rom has a lot of bugs mate
Xperia d 4.1 is best for gaming
I played almost every hd game in it
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
perhaps some of the common jb bugs, though in my daily use i don't experience bugs, only 2 or 3 fc's when updating in playstore, but that's playstore or my undervolting (57/1100)
other than that, to use your own words in development: "smooth and stable"
don't know about gaming though.
Sent from my MB526 using xda app-developers app